LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   Printer setup (https://www.linuxquestions.org/questions/linux-newbie-8/printer-setup-864055/)

Hanse42 02-21-2011 10:19 AM

Printer setup
 
I installed my Brother DCP 9045CDN and it works great printing from OpenOffice, but it is skewed printing pdf or jpeg. Anybody knows what I need to do? Also, how would I make the scanner work?

corp769 02-21-2011 11:46 AM

How did you install it, and what distro are you using?

Hanse42 03-01-2011 07:20 PM

Fedora 14 and printer configuration
 
ah, sorry, i didn't see your reply. Well, I am using Fedora 14 KDE, and installed the printer by typing in the printers IP address in the printer setup gui (called 'printer configuration' KDE control module). It prints out fine except pdfs. ... well, and I am not sure how to use it as a scanner.

corp769 03-01-2011 11:40 PM

Quote:

Originally Posted by Hanse42 (Post 4275752)
ah, sorry, i didn't see your reply. Well, I am using Fedora 14 KDE, and installed the printer by typing in the printers IP address in the printer setup gui (called 'printer configuration' KDE control module). It prints out fine except pdfs. ... well, and I am not sure how to use it as a scanner.

What drivers did you use?

Hanse42 03-03-2011 06:20 PM

Hi:

I has two different drivers under Brother-DCP-9045CDN:

1. Brother DCP-9045CDN BR-Script3 [en] (recommended) ... that's the one I have right now.
2. Brother DCP-9045CDN Foomatic/Postscipt [en]

frankbell 03-03-2011 08:12 PM

Here's the Open Printing Database listing:

http://www.openprinting.org/printer/...er-DCP-9045CDN

mark_alfred 03-03-2011 08:55 PM

For your scanner, install xsane, along with sane-find-scanner, and then run the sane-find-scanner command in your terminal to locate the scanner.

Hanse42 04-13-2011 06:55 PM

sorry i am so late with my response, but i didn't had much time to spend on this. now i did. i tried the brother pdd and the openprinter driver with new improvement over the foomatic driver. testpage is fine, openoffice printout is fine, just pdf is skewed down 3 inches from the top. Any suggestions?

WRT, xsane. I installed it but it cannot find the scanner. the sane-find-scanner link doesn't talk about network scanners. not sure what to do here either.

Hanse42 04-25-2011 04:37 PM

I know I am in no position to bump this this thread due to my past late replies, but I am checking now for responses almost everyday. :)

michaelk 04-25-2011 05:52 PM

Check ppd file for your printer located in the /etc/cups/ppd/ directory. It could be that the default page size is not setup correctly. Might be A4 vs Letter.

Hanse42 04-25-2011 07:54 PM

Thanks vm for the response. I think, it's not a A4/Letter issue. The width is correct. It's just pushed 3-4 inches down the page, i.e. 3-4 inches whitespace at the top and cut-off at the bottom. Here is the ppd though:

*PPD-Adobe: "4.3"
*% This program is free software; you can redistribute it and/or modify it
*% under the terms of the GNU General Public License as published by the Free
*% Software Foundation; either version 2 of the License, or (at your option)
*% any later version.
*%
*% This program is distributed in the hope that it will be useful, but WITHOUT
*% ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
*% FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
*% more details.
*%
*% You should have received a copy of the GNU General Public License along with
*% this program; if not, write to the Free Software Foundation, Inc., 59 Temple
*% Place, Suite 330, Boston, MA 02111-1307 USA
*%


*%================================================
*% Copyright(C) 2007 Brother Industries, Ltd.
*% "Brother DCP-9045CDN BR-Script3"
*%================================================

*%==== General Information Keywords ========================
*FormatVersion: "4.3"
*FileVersion: "1.01"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*Manufacturer: "Brother"
*PCFileName: "BR9045_2.PPD"
*Product: "(Brother DCP-9045CDN)"
*PSVersion: "(3010.106) 3"
*ShortNickName: "Brother DCP-9045CDN BR-Script3"
*ModelName: "Brother DCP-9045CDN BR-Script3"
*NickName: "Brother DCP-9045CDN BR-Script3 , Postscript-Brother 20101122 (OpenPrinting LSB 3.2)"

*%==== Basic Device Capabilities =============
*LanguageLevel: "3"
*TTRasterizer: Type42
*ColorDevice: True
*DefaultColorSpace: CMYK
*FileSystem: True
*?FileSystem:"
save
/devname (%disk0%) def
/ret false def
0 1 7{
devname exch 48 add 5 exch put
devname devstatus {
0 ne {/ret true def}if
pop pop pop pop pop pop pop
}if
}for
ret {(True)}{(False)} ifelse = flush
restore
"
*End

*Throughput: "20"
*FreeVM: "2700000"

*%==== Emulations and Protocols ==========
*Protocols: PJL TBCP

*SuggestedJobTimeout: "0"
*SuggestedWaitTimeout: "300"
*PrintPSErrors: True

*%==== PostScript Patches ==========
*%*JobPatchFile 1: "statusdict/setusbbinary known{statusdict begin true setusbbinary end}if"

*%==== JCL Features ==========================
*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = POSTSCRIPT <0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"

*%==== Installable Options ===================

*OpenGroup: InstallableOptions/Options Installed

*OpenUI *OptionTrays/Number of Input Trays: PickOne
*DefaultOptionTrays: 2Trays
*OptionTrays 1Trays/ 1: ""
*OptionTrays 2Trays/ 2: ""
*?OptionTrays:"
save
<</BRFeeder 1>>setpagedevice currentpagedevice/BRFeeder get
1 eq{(2Trays)}{(1Trays)}ifelse
= flush
restore
"
*End
*CloseUI: *OptionTrays

*CloseGroup: InstallableOptions

*UIConstraints: *OptionTrays 1Trays *InputSlot Tray2
*UIConstraints: *InputSlot Tray2 *OptionTrays 1Trays



*%==== Media Selection ======================

*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "<< /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*PageSize Legal/Legal: "<< /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*PageSize Executive/Executive: "<< /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*PageSize A4/A4: "<< /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*PageSize A4Long/A4 Long: "<< /PageSize [595 1147] /ImagingBBox null >> setpagedevice"
*PageSize A5/A5: "<< /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*PageSize A6/A6: "<< /PageSize [297 420] /ImagingBBox null >> setpagedevice"
*PageSize Env10/Com-10: "<< /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*PageSize EnvMonarch/Monarch: "<</PageSize [279 540] /ImagingBBox null>> setpagedevice"
*PageSize EnvDL/DL: "<< /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*PageSize EnvDLRotated/DL Long Edge: "<< /PageSize [624 312] /ImagingBBox null >> setpagedevice"
*PageSize EnvC5/C5: "<</PageSize [459 649] /ImagingBBox null>> setpagedevice"
*PageSize EnvISOB5/B5 : "<< /PageSize [499 709] /ImagingBBox null >> setpagedevice"
*PageSize EnvISOB6/B6 : "<< /PageSize [354 499] /ImagingBBox null >> setpagedevice"
*PageSize B5/JIS B5: "<< /PageSize [515.0 727.0] /ImagingBBox null >> setpagedevice"
*PageSize FanFoldGermanLegal/Folio: "<< /PageSize [612 936] /ImagingBBox null >> setpagedevice"
*PageSize 2.75x3/Organizer J: "<< /PageSize [198 360] /ImagingBBox null >> setpagedevice"
*PageSize Bible/Organizer K: "<< /PageSize [270 486] /ImagingBBox null >> setpagedevice"
*PageSize Statement/Organizer L: "<< /PageSize [396 612] /ImagingBBox null >> setpagedevice"
*PageSize OrgM/Organizer M: "<< /PageSize [611 792] /ImagingBBox null >> setpagedevice"
*PageSize 3x5/3x5: "<< /PageSize [216 360] /ImagingBBox null >> setpagedevice"
*PageSize Postcard/Postcard: "<< /PageSize [284 419] /ImagingBBox null >> setpagedevice"
*CloseUI: *PageSize

*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "<< /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*PageRegion Legal/Legal: "<< /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*PageRegion Executive/Executive: "<< /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*PageRegion A4/A4: "<< /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*PageRegion A4Long/A4 Long: "<< /PageSize [595 1147] /ImagingBBox null >> setpagedevice"
*PageRegion A5/A5: "<< /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*PageRegion A6/A6: "<< /PageSize [297 420] /ImagingBBox null >> setpagedevice"
*PageRegion Env10/Com-10: "<< /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*PageRegion EnvMonarch/Monarch: "<</PageSize [279 540] /ImagingBBox null>> setpagedevice"
*PageRegion EnvDL/DL: "<< /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*PageRegion EnvDLRotated/DL Long Edge: "<< /PageSize [624 312] /ImagingBBox null >> setpagedevice"
*PageRegion EnvC5/C5: "<</PageSize [459 649] /ImagingBBox null>> setpagedevice"
*PageRegion EnvISOB5/B5 : "<< /PageSize [499 709] /ImagingBBox null >> setpagedevice"
*PageRegion EnvISOB6/B6 : "<< /PageSize [354 499] /ImagingBBox null >> setpagedevice"
*PageRegion B5/JIS B5: "<< /PageSize [515.0 727.0] /ImagingBBox null >> setpagedevice"
*PageRegion FanFoldGermanLegal/Folio: "<< /PageSize [612 936] /ImagingBBox null >> setpagedevice"
*PageRegion 2.75x3/Organizer J: "<< /PageSize [198 360] /ImagingBBox null >> setpagedevice"
*PageRegion Bible/Organizer K: "<< /PageSize [270 486] /ImagingBBox null >> setpagedevice"
*PageRegion Statement/Organizer L: "<< /PageSize [396 612] /ImagingBBox null >> setpagedevice"
*PageRegion OrgM/Organizer M: "<< /PageSize [611 792] /ImagingBBox null >> setpagedevice"
*PageRegion 3x5/3x5: "<< /PageSize [216 360] /ImagingBBox null >> setpagedevice"
*PageRegion Postcard/Postcard: "<< /PageSize [284 419] /ImagingBBox null >> setpagedevice"
*CloseUI: *PageRegion

*DefaultImageableArea: Letter
*ImageableArea Letter/Letter: "12.0 12.12 599.88 780.0"
*ImageableArea Legal/Legal: "12.0 12.12 599.88 996.0"
*ImageableArea Executive/Executive: "11.99 12.12 510.0 744.0"
*ImageableArea A4/A4: "12.0 12.24 583.08 829.92"
*ImageableArea A4Long/A4 Long: "12.0 12.12 583.08 1134.96"
*ImageableArea A5/A5: "12.0 11.88 407.4 582.96"
*ImageableArea A6/A6: "12.0 12.6 285.48 408.0"
*ImageableArea Env10/Com-10: "12.0 12.12 284.88 672.0"
*ImageableArea EnvMonarch/Monarch: "12.0 12.12 266.76 528.0"
*ImageableArea EnvDL/DL: "12.0 12.24 299.88 612.0"
*ImageableArea EnvDLRotated/DL Long Edge: "12.0 12.12 611.76 300.0"
*ImageableArea EnvC5/C5: "12.0 12.24 446.76 636.96"
*ImageableArea EnvISOB5/B5 : "12.0 12.48 486.72 696.96"
*ImageableArea EnvISOB6/B6 : "12.0 12.24 342.12 486.96"
*ImageableArea B5/JIS B5: "12.0 12.48 502.92 714.96"
*ImageableArea FanFoldGermanLegal/Folio: "12.0 12.12 599.88 924.0"
*ImageableArea 2.75x3/Organizer J: "12.0 12.12 185.88 348.0"
*ImageableArea Bible/Organizer K: "12.0 12.12 257.88 474.0"
*ImageableArea Statement/Organizer L: "12.0 12.12 383.88 600.0"
*ImageableArea OrgM/Organizer M: "12.0 12.12 599.88 780.0"
*ImageableArea 3x5/3x5: "12.0 12.12 204.00 348.00"
*ImageableArea Postcard/Postcard: "12.12 12.0 270.1 406.92"

*%==== Information About Media Sizes ========

*DefaultPaperDimension: Letter
*PaperDimension Letter/Letter: "612 792"
*PaperDimension Legal/Legal: "612 1008"
*PaperDimension Executive/Executive: "522 756"
*PaperDimension A4/A4: "595 842"
*PaperDimension A4Long/A4 Long: "595 1147"
*PaperDimension A5/A5: "420 595"
*PaperDimension A6/A6: "297 420"
*PaperDimension Env10/Com-10: "297 684"
*PaperDimension EnvMonarch/Monarch: "279 540"
*PaperDimension EnvDL/DL: "312 624"
*PaperDimension EnvDLRotated/DL Long Edge: "624 312"
*PaperDimension EnvC5/C5: "459 649"
*PaperDimension EnvISOB5/B5 : "499 709"
*PaperDimension EnvISOB6/B6 : "354 499"
*PaperDimension B5/JIS B5: "516 729"
*PaperDimension FanFoldGermanLegal/Folio: "612 936"
*PaperDimension 2.75x3/Organizer J: "198 360"
*PaperDimension Bible/Organizer K: "270 486"
*PaperDimension Statement/Organizer L: "396 612"
*PaperDimension OrgM/Organizer M: "612 792"
*PaperDimension 3x5/3x5: "216 360"
*PaperDimension Postcard/Postcard: "284 419"

*%==== Custom Page Sizes ====================
*NonUIOrderDependency: 40 AnySetup *CustomPageSize
*VariablePaperSize: True
*LeadingEdge Short: ""
*DefaultLeadingEdge: Short
*MaxMediaWidth: "612"
*MaxMediaHeight: "1152"
*HWMargins: 13 13 13 13
*CustomPageSize True: "
<</BRCustomPageSize true>> setpagedevice
pop pop pop
<< /PageSize [ 5 -2 roll ] /ImagingBBox null >>
setpagedevice
"
*End
*ParamCustomPageSize Width: 1 points 198 612
*ParamCustomPageSize Height: 2 points 329 1152
*ParamCustomPageSize WidthOffset: 3 points 0 0
*ParamCustomPageSize HeightOffset: 4 points 0 0
*ParamCustomPageSize Orientation: 5 int 0 3

*%==== 5.13 Media Handling Features ============================
*OpenUI *BRMediaType/Media Type: PickOne
*OrderDependency: 28 AnySetup *BRMediaType
*DefaultBRMediaType:Plain
*BRMediaType Plain/Plain Paper: "<</MediaType (REGULAR)>>setpagedevice"
*BRMediaType Recycled/Recycled Paper: "<</MediaType (RECYCLED)>>setpagedevice"
*BRMediaType Thin/Thin Paper: "<</MediaType (THIN)>>setpagedevice"
*BRMediaType Thick/Thick Paper: "<</MediaType (THICK)>>setpagedevice"
*BRMediaType ThickPaper2/Thicker Paper: "<</MediaType (THICK2)>>setpagedevice"
*BRMediaType BOND/Bond Paper: "<</MediaType (BOND)>>setpagedevice"
*BRMediaType Env/Envelopes: "<</MediaType (ENVELOPES)>>setpagedevice"
*BRMediaType EnvThick/Env. Thick: "<</MediaType (ENVTHICK)>>setpagedevice"
*BRMediaType EnvThin/Env. Thin: "<</MediaType (ENVTHIN)>>setpagedevice"
*BRMediaType Label/Label: "<</MediaType (LABEL)>>setpagedevice"
*BRMediaType PostCard/Postcard: "<</MediaType (POSTCARD)>>setpagedevice"
*CloseUI: *BRMediaType

*OpenUI *InputSlot: PickOne
*OrderDependency: 29 AnySetup *InputSlot
*DefaultInputSlot: AutoSelect
*InputSlot AutoSelect/Auto Select: "<</ManualFeed false /BRTraysw true >> setpagedevice"
*InputSlot Tray1/Tray1: "<</ManualFeed false /BRTraysw false /BRFeeder 0>> setpagedevice"
*InputSlot Tray2/Tray2: "<</ManualFeed false /BRTraysw false /BRFeeder 1>> setpagedevice"
*InputSlot MPTray/MP Tray: "<</ManualFeed false /BRTraysw false /BRFeeder 4>> setpagedevice"
*CloseUI: *InputSlot

*RequiresPageRegion All:True

*OpenUI *ManualFeed: Boolean
*OrderDependency: 19 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "<</ManualFeed true>> setpagedevice"
*ManualFeed False: "<</ManualFeed false>> setpagedevice"
*CloseUI: *ManualFeed

*%=== Duplex ================================
*OpenUI *Duplex: PickOne
*OrderDependency: 25 AnySetup *Duplex
*DefaultDuplex: None
*Duplex DuplexTumble: "<</Duplex true /Tumble true>>setpagedevice"
*Duplex DuplexNoTumble: "<</Duplex true /Tumble false>>setpagedevice"
*Duplex None: "<</Duplex false /Tumble false>>setpagedevice"
*CloseUI: *Duplex

*%=== Output Bin =============================

*% === Collate ==========
*%=== JobHold ================================

*OpenUI *BRJobHold/Job Spooling: PickOne
*OrderDependency: 21 AnySetup *BRJobHold
*DefaultBRJobHold: None
*BRJobHold None/Off: "<</BRHold 0>>setpagedevice"
*BRJobHold Private/Secure Print: "<</BRHold 2 /BRHoldType 1>>setpagedevice"
*CloseUI: *BRJobHold

*OpenUI *BRJobPIN/Password: PickOne
*OrderDependency: 22 AnySetup *BRJobPIN
*DefaultBRJobPIN: HoldKey0
*BRJobPIN HoldKey0/None: "<</BRHoldKey 0>> setpagedevice"
*BRJobPIN HoldKey1/1002: "<</BRHoldKey 1002>> setpagedevice"
*BRJobPIN HoldKey2/2833: "<</BRHoldKey 2833>> setpagedevice"
*BRJobPIN HoldKey3/3410: "<</BRHoldKey 3410>> setpagedevice"
*BRJobPIN HoldKey4/4791: "<</BRHoldKey 4791>> setpagedevice"
*BRJobPIN HoldKey5/0052: "<</BRHoldKey 0052>> setpagedevice"
*BRJobPIN HoldKey6/9612: "<</BRHoldKey 9612>> setpagedevice"
*BRJobPIN HoldKey7/0438: "<</BRHoldKey 0438>> setpagedevice"
*BRJobPIN HoldKey8/7328: "<</BRHoldKey 7328>> setpagedevice"
*BRJobPIN HoldKey9/0006: "<</BRHoldKey 0006>> setpagedevice"
*CloseUI: *BRJobPIN

*OpenUI *BRUser/User Name: PickOne
*OrderDependency: 91 AnySetup *BRUser
*DefaultBRUser: UserSystem
*BRUser UserSystem/System Name: "
"
*End
*CloseUI: *BRUser

*OpenUI *BRJobName/Job Name: PickOne
*OrderDependency: 92 AnySetup *BRJobName
*DefaultBRJobName: JobNameSystem
*BRJobName JobNameSystem/System Name: ""
*BRJobName JobName1/1: "%%BRTitle: 1
"
*End
*BRJobName JobName2/2: "%%BRTitle: 2
"
*End
*BRJobName JobName3/3: "%%BRTitle: 3
"
*End
*BRJobName JobName4/4: "%%BRTitle: 4
"
*End
*BRJobName JobName5/5: "%%BRTitle: 5
"
*End
*BRJobName JobName6/6: "%%BRTitle: 6
"
*End
*BRJobName JobName7/7: "%%BRTitle: 7
"
*End
*BRJobName JobName8/8: "%%BRTitle: 8
"
*End
*BRJobName JobName9/9: "%%BRTitle: 9
"
*End
*CloseUI: *BRJobName

*%==== 5.14 Finishing Features =================================
*%%%%% Resolution and Appearance Control %%%%%
*DefaultResolution: 600dpi

*OpenUI *CAPT/Print Quality:PickOne
*OrderDependency: 10 AnySetup *CAPT
*DefaultCAPT: Fine
*CAPT Fine/Normal (600 x 600 dpi): "<</BRApt 0 /HWResolution [600 600]>> setpagedevice"
*CAPT SuperFine/Fine (2400 dpi class): "<</BRApt 2 /HWResolution [600 600]>> setpagedevice"
*?CAPT: "
currentpagedevice /BRApt get 2 eq
{(SuperFine)}
{
currentpagedevice/HWResolution get 0 get 600 eq{(Fine)}{(Draft)}ifelse
}ifelse = flush
"
*End
*CloseUI: *CAPT

*OpenUI *TonerSaveMode/Toner Save: PickOne
*DefaultTonerSaveMode: Off
*OrderDependency: 10 AnySetup *TonerSaveMode
*TonerSaveMode Off/Off: "
statusdict/tonersave known{statusdict begin false tonersave end}if
"
*End
*TonerSaveMode On/On: "
statusdict/tonersave known{statusdict begin true tonersave end}if
"
*End
*CloseUI: *TonerSaveMode

*%==== BR-Script Color Original UI ==================================

*OpenUI *BRPrintQuality/Color/Mono: PickOne
*OrderDependency: 15 AnySetup *BRPrintQuality
*DefaultBRPrintQuality: Auto
*BRPrintQuality Auto/Auto: "
<</BRProcessColor 4 /BRHrc 0>>setpagedevice
<</BRColorAdapt true>>setpagedevice
<</BRRenderMode false>>setpagedevice"
*BRPrintQuality Color/Color: "
<</BRProcessColor 4 /BRHrc 0>>setpagedevice
<</BRColorAdapt false>>setpagedevice
<</BRRenderMode false>>setpagedevice"
*BRPrintQuality Black/Mono: "
<</BRProcessColor 1>>setpagedevice
<</BRColorAdapt false>>setpagedevice
<</BRRenderMode true>>setpagedevice"
*?BRPrintQuality: "
save
currentpagedevice /BRProcessColor get 1 eq
{(Black)}{(Color)}ifelse
= flush
restore
"
*End
*CloseUI: *BRPrintQuality

*% RGB Gamma Correction Information ===============
*OpenUI *BRGammaValue/Gamma Correction: PickOne
*OrderDependency: 130.0 AnySetup *BRGammaValue
*DefaultBRGammaValue: G22
*BRGammaValue G18/1.8: "
<</BRGammaValue 1.8>>setpagedevice
<</UseCIEColor true>>setpagedevice
"
*End
*BRGammaValue G22/2.2: "
<</BRGammaValue 2.2>>setpagedevice
<</UseCIEColor true>>setpagedevice
"
*End
*BRGammaValue Off/Off: "
<</UseCIEColor false>>setpagedevice
"
*End
*CloseUI: *BRGammaValue

*% Color Mode Information ===============
*OpenUI *BRColorMode/Color Mode: Boolean
*OrderDependency: 131.0 AnySetup *BRColorMode
*DefaultBRColorMode: False
*BRColorMode True/Vivid: "
<</BRColorMode 1>>setpagedevice
"
*End
*BRColorMode False/Normal: "
<</BRColorMode 0>>setpagedevice
"
*End
*CloseUI: *BRColorMode

*% Improve Gray Color Information ===============
*OpenUI *BRImprovedGray/Improve Gray Color: Boolean
*OrderDependency: 132.0 AnySetup *BRImprovedGray
*DefaultBRImprovedGray: False
*BRImprovedGray True/On: "
<</BRImprovedGray true>>setpagedevice
"
*End
*BRImprovedGray False/Off: "
<</BRImprovedGray false>>setpagedevice
"
*End
*CloseUI: *BRImprovedGray

*% UCRGCR Information ===============
*OpenUI *UCRGCRForImage/Enhance Black Printing: Boolean
*OrderDependency: 133 AnySetup *ScreenLock
*DefaultUCRGCRForImage: False
*UCRGCRForImage True/On: "
statusdict begin true ucrgcrforimage end
"
*End
*UCRGCRForImage False/Off: "
statusdict begin false ucrgcrforimage end
"
*End
*CloseUI: *UCRGCRForImage

*% Halftone Screen Lock Information ===============
*OpenUI *ScreenLock/Halftone Screen Lock: Boolean
*OrderDependency: 90 AnySetup *ScreenLock
*DefaultScreenLock: True
*ScreenLock True/On: "
<</HalftoneMode 1>>setuserparams
"
*End
*ScreenLock False/Off: "
<</HalftoneMode 0>>setuserparams
"
*End
*CloseUI: *ScreenLock

*% Reduced Image ===============
*OpenUI *BRReducedImage/High Quality Image Printing: Boolean
*OrderDependency: 131.0 AnySetup *BRReducedImage
*DefaultBRReducedImage: False
*BRReducedImage True/On: "
<</BRReduceImage false>>setpagedevice
"
*End
*BRReducedImage False/Off: "
<</BRReduceImage true>>setpagedevice
"
*End
*CloseUI: *BRReducedImage

*OpenUI *BRLanguageLevel/BR-Script Level: PickOne
*OrderDependency: 15 AnySetup *BRLanguageLevel
*DefaultBRLanguageLevel: L3
*BRLanguageLevel L1/1: "userdict begin /languagelevel 1 def end"
*BRLanguageLevel L2/2: "userdict begin /languagelevel 2 def end"
*BRLanguageLevel L3/3: ""
*CloseUI: *BRLanguageLevel

*%==== 5.17 Gray Levels and Halftoninig ========================
*AccurateScreenSupport: False
*ScreenFreq: "60.0"
*ScreenAngle: "0.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "{1.0 add 180 mul 1 add sin 0.001 add exch 1.0 add 180 mul 2 add sin mul}"

*DefaultTransfer: Null
*Transfer Null: "{}"
*Transfer Null.Inverse: "{1 exch sub}"

*%==== 5.18 Color Issues =======================================
*% BlackSubstitution -> Original UI

*%==== 5.19 Color Separation Keywords ==========================
*DefaultColorSep: ProcessBlack
*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi:"47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*End

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%==== 5.20 Font Related Keywords ==============================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
*Font Bookman-Demi: Standard "(001.004S)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
*Font Bookman-Light: Standard "(001.004S)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
*Font Courier: Standard "(002.004S)" Standard ROM
*Font Courier-Bold: Standard "(002.004S)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
*Font Courier-Oblique: Standard "(002.004S)" Standard ROM
*Font Helvetica: Standard "(001.006S)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
*Font Palatino-Bold: Standard "(001.005S)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
*Font Palatino-Italic: Standard "(001.005S)" Standard ROM
*Font Palatino-Roman: Standard "(001.005S)" Standard ROM
*Font Times-Bold: Standard "(001.007S)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
*Font Times-Italic: Standard "(001.007S)" Standard ROM
*Font Times-Roman: Standard "(001.007S)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
*Font ZapfDingbats: Special "(001.004S)" Special ROM
*Font Symbol: Special "(001.007S)" Special ROM
*Font Alaska: Standard "(001.005)" Standard ROM
*Font AlaskaExtrabold: Standard "(001.005)" Standard ROM
*Font AntiqueOakland: Standard "(001.005)" Standard ROM
*Font AntiqueOakland-Bold: Standard "(001.005)" Standard ROM
*Font AntiqueOakland-Oblique: Standard "(001.005)" Standard ROM
*Font ClevelandCondensed: Standard "(001.005)" Standard ROM
*Font Connecticut: Standard "(001.005)" Standard ROM
*Font Guatemala-Antique: Standard "(001.005)" Standard ROM
*Font Guatemala-Bold: Standard "(001.005)" Standard ROM
*Font Guatemala-Italic: Standard "(001.005)" Standard ROM
*Font Guatemala-BoldItalic: Standard "(001.005)" Standard ROM
*Font LetterGothic: Standard "(001.005)" Standard ROM
*Font LetterGothic-Bold: Standard "(001.005)" Standard ROM
*Font LetterGothic-Oblique: Standard "(001.005)" Standard ROM
*Font Maryland: Standard "(001.005)" Standard ROM
*Font Oklahoma: Standard "(001.005)" Standard ROM
*Font Oklahoma-Bold: Standard "(001.005)" Standard ROM
*Font Oklahoma-Oblique: Standard "(001.005)" Standard ROM
*Font Oklahoma-BoldOblique: Standard "(001.005)" Standard ROM
*Font Utah: Standard "(001.005)" Standard ROM
*Font Utah-Bold: Standard "(001.005)" Standard ROM
*Font Utah-Oblique: Standard "(001.005)" Standard ROM
*Font Utah-BoldOblique: Standard "(001.005)" Standard ROM
*Font UtahCondensed: Standard "(001.005)" Standard ROM
*Font UtahCondensed-Bold: Standard "(001.005)" Standard ROM
*Font UtahCondensed-Oblique: Standard "(001.004)" Standard ROM
*Font UtahCondensed-BoldOblique: Standard "(001.005)" Standard ROM
*Font BermudaScript: Standard "(001.005)" Standard ROM
*Font Germany: Standard "(001.005)" Standard ROM
*Font SanDiego: Standard "(001.005)" Standard ROM
*Font US-Roman: Standard "(001.005)" Standard ROM
*?FontQuery: "
save
count 1 gt
{exch dup dup
=string cvs (/) print print (:) print
FontDirectory exch known
{pop(Yes)}
{(fonts/)AppendName exch pop mark exch
{}=string filenameforall counttomark
0 gt
{cleartomark(Yes)}
{cleartomark(No)}ifelse
}ifelse
=
}if
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory{pop ==}forall
(fonts/*)
{dup length 6 sub 6 exch getinterval cvn ==
}=string filenameforall
(*) = flush
restore
"
*End


*%==== 5.21 Printer Messages ===================================
*%
*% Printer Message
*%
*PrinterError: "service call"
*PrinterError: "cover open"
*PrinterError: "end of ink"
*PrinterError: "out of maintenance paper"
*PrinterError: "out of paper"
*PrinterError: "paper jam"
*PrinterError: "manual feed time out"
*PrinterError: "load paper letter size"
*PrinterError: "load paper legal size"
*PrinterError: "load paper B5 size"
*PrinterError: "load paper A4 size"
*PrinterError: "offline"

*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: service call"
*Status: "PrinterError: cover open"
*Status: "PrinterError: end of ink"
*Status: "PrinterError: out of paper"
*Status: "PrinterError: paper jam"
*Status: "PrinterError: manual feed time out"
*Status: "PrinterError: load paper letter size"
*Status: "PrinterError: load paper legal size"
*Status: "PrinterError: load paper B5 size"
*Status: "PrinterError: load paper A4 size"
*Status: "PrinterError: offline"

*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "Serial"
*Source: "Parallel"
*Source: "EtherTalk"
*Source: "LPR"
*Source: "PrintServer"
*Source: "Internal"

*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using BR-03B."
*%==== 5.22 System Management ==================================
*Password: "0"
*ExitServer: "
serverdict begin 0 exitserver
"
*End
*Reset: "
clear cleardictstack
serverdict begin 0 exitserver
systemdict /quit get exec
"
*End


All times are GMT -5. The time now is 06:58 PM.