LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   paniclog is not zero (https://www.linuxquestions.org/questions/linux-newbie-8/paniclog-is-not-zero-726516/)

macubex 05-17-2009 12:33 AM

paniclog is not zero
 
When I boot up I get an error about /var/log/exim4/paniclog is not zero.
I get it every time. here is the content of the file



2009-04-11 10:55:13 Exim configuration error in line 642 of /var/lib/exim4/config.autogenerated.tmp:
user mail was not found
2009-04-11 10:57:17 Exim configuration error in line 642 of /var/lib/exim4/config.autogenerated.tmp:
user mail was not found
2009-04-11 11:02:02 Exim configuration error in line 642 of /var/lib/exim4/config.autogenerated.tmp:
user mail was not found
2009-04-11 11:22:25 Exim configuration error in line 642 of /var/lib/exim4/config.autogenerated.tmp:
user mail was not found


This is the config.autogenerated file content. I have bolded line 642.

#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# This file is generated dynamically from the files in
# the conf.d/ directory, or from exim4.conf.template respectively.
# Additional information is read from update-exim4.conf.conf
# This version of the file was created from the directory /etc/exim4
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########

exim_path = /usr/sbin/exim4

.ifndef CONFDIR
CONFDIR = /etc/exim4
.endif

UPEX4CmacrosUPEX4C = 1
##############################################
# the following macro definitions were created
# dynamically by /usr/sbin/update-exim4.conf
.ifndef MAIN_LOCAL_INTERFACES
MAIN_LOCAL_INTERFACES=127.0.0.1
.endif
.ifndef MAIN_PACKAGE_VERSION
MAIN_PACKAGE_VERSION=4.69-9
.endif
.ifndef MAIN_LOCAL_DOMAINS
MAIN_LOCAL_DOMAINS=@:localhost:r-1de4224f24df4
.endif
.ifndef MAIN_RELAY_TO_DOMAINS
MAIN_RELAY_TO_DOMAINS=empty
.endif
.ifndef ETC_MAILNAME
ETC_MAILNAME=r-1de4224f24df4
.endif
.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif
.ifndef MAIN_RELAY_NETS
MAIN_RELAY_NETS=: 127.0.0.1 : ::::1
.endif
.ifndef DCreadhost
DCreadhost=empty
.endif
.ifndef DCsmarthost
DCsmarthost=empty
.endif
.ifndef DC_eximconfig_configtype
DC_eximconfig_configtype=local
.endif
.ifndef DCconfig_local
DCconfig_local=1
.endif
##############################################


domainlist local_domains = MAIN_LOCAL_DOMAINS

domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS

hostlist relay_from_hosts = MAIN_RELAY_NETS

.ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN
.ifndef MAIN_QUALIFY_DOMAIN
qualify_domain = ETC_MAILNAME
.else
qualify_domain = MAIN_QUALIFY_DOMAIN
.endif
.endif

.ifdef MAIN_LOCAL_INTERFACES
local_interfaces = MAIN_LOCAL_INTERFACES
.endif

.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif

gecos_pattern = ^([^,:]*)
gecos_name = $1

.ifndef CHECK_RCPT_LOCAL_LOCALPARTS
CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?]
.endif

.ifndef CHECK_RCPT_REMOTE_LOCALPARTS
CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./
.endif

.ifndef MAIN_LOG_SELECTOR
MAIN_LOG_SELECTOR = +tls_peerdn
.endif

.ifndef MAIN_ACL_CHECK_MAIL
MAIN_ACL_CHECK_MAIL = acl_check_mail
.endif
acl_smtp_mail = MAIN_ACL_CHECK_MAIL

.ifndef MAIN_ACL_CHECK_RCPT
MAIN_ACL_CHECK_RCPT = acl_check_rcpt
.endif
acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT

.ifndef MAIN_ACL_CHECK_DATA
MAIN_ACL_CHECK_DATA = acl_check_data
.endif
acl_smtp_data = MAIN_ACL_CHECK_DATA

.ifdef MESSAGE_SIZE_LIMIT
message_size_limit = MESSAGE_SIZE_LIMIT
.endif

.ifdef MAIN_ALLOW_DOMAIN_LITERALS
allow_domain_literals
.endif

.ifndef DC_minimaldns
.ifndef MAIN_HOST_LOOKUP
MAIN_HOST_LOOKUP = *
.endif
host_lookup = MAIN_HOST_LOOKUP
.endif

.ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME
primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME
.endif

.ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
.endif

.ifndef MAIN_FORCE_SENDER
local_from_check = false
local_sender_retain = true
untrusted_set_sender = *
.endif

.ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER
MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d
.endif
ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER

.ifndef MAIN_TIMEOUT_FROZEN_AFTER
MAIN_TIMEOUT_FROZEN_AFTER = 7d
.endif
timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER

.ifndef MAIN_FREEZE_TELL
MAIN_FREEZE_TELL = postmaster
.endif
freeze_tell = MAIN_FREEZE_TELL

.ifndef SPOOLDIR
SPOOLDIR = /var/spool/exim4
.endif
spool_directory = SPOOLDIR

.ifndef MAIN_TRUSTED_USERS
MAIN_TRUSTED_USERS = uucp
.endif
trusted_users = MAIN_TRUSTED_USERS
.ifdef MAIN_TRUSTED_GROUPS
trusted_groups = MAIN_TRUSTED_GROUPS
.endif

.ifdef MAIN_TLS_ENABLE
.ifndef MAIN_TLS_ADVERTISE_HOSTS
MAIN_TLS_ADVERTISE_HOSTS = *
.endif
tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS

.ifdef MAIN_TLS_CERTKEY
tls_certificate = MAIN_TLS_CERTKEY
.else
.ifndef MAIN_TLS_CERTIFICATE
MAIN_TLS_CERTIFICATE = CONFDIR/exim.crt
.endif
tls_certificate = MAIN_TLS_CERTIFICATE

.ifndef MAIN_TLS_PRIVATEKEY
MAIN_TLS_PRIVATEKEY = CONFDIR/exim.key
.endif
tls_privatekey = MAIN_TLS_PRIVATEKEY
.endif

.ifndef MAIN_TLS_VERIFY_CERTIFICATES
MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/ca-certificates.crt}\
{/etc/ssl/certs/ca-certificates.crt}\
{/dev/null}}
.endif
tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES

.ifdef MAIN_TLS_VERIFY_HOSTS
tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS
.endif

.ifndef MAIN_TLS_TRY_VERIFY_HOSTS
MAIN_TLS_TRY_VERIFY_HOSTS = *
.endif
tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS

.endif

.ifdef MAIN_LOG_SELECTOR
log_selector = MAIN_LOG_SELECTOR
.endif

begin acl

acl_local_deny_exceptions:
accept
hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\
{CONFDIR/host_local_deny_exceptions}\
{}}
accept
senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\
{CONFDIR/sender_local_deny_exceptions}\
{}}
accept
hosts = ${if exists{CONFDIR/local_host_whitelist}\
{CONFDIR/local_host_whitelist}\
{}}
accept
senders = ${if exists{CONFDIR/local_sender_whitelist}\
{CONFDIR/local_sender_whitelist}\
{}}

.ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
.include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
.endif

.ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
.include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
.endif

acl_check_mail:
.ifdef CHECK_MAIL_HELO_ISSUED
deny
message = no HELO given before MAIL command
condition = ${if def:sender_helo_name {no}{yes}}
.endif

accept

acl_check_rcpt:

accept
hosts = :

.ifdef CHECK_RCPT_LOCAL_LOCALPARTS
deny
domains = +local_domains
local_parts = CHECK_RCPT_LOCAL_LOCALPARTS
message = restricted characters in address
.endif



.ifdef CHECK_RCPT_REMOTE_LOCALPARTS
deny
domains = !+local_domains
local_parts = CHECK_RCPT_REMOTE_LOCALPARTS
message = restricted characters in address
.endif

accept
.ifndef CHECK_RCPT_POSTMASTER
local_parts = postmaster
.else
local_parts = CHECK_RCPT_POSTMASTER
.endif
domains = +local_domains : +relay_to_domains

.ifdef CHECK_RCPT_VERIFY_SENDER
deny
message = Sender verification failed
!acl = acl_local_deny_exceptions
!verify = sender
.endif

deny
!acl = acl_local_deny_exceptions
senders = ${if exists{CONFDIR/local_sender_callout}\
{CONFDIR/local_sender_callout}\
{}}
!verify = sender/callout

accept
hosts = +relay_from_hosts
control = submission/sender_retain

accept
authenticated = *
control = submission/sender_retain

require
message = relay not permitted
domains = +local_domains : +relay_to_domains

require
verify = recipient

deny
!acl = acl_local_deny_exceptions
recipients = ${if exists{CONFDIR/local_rcpt_callout}\
{CONFDIR/local_rcpt_callout}\
{}}
!verify = recipient/callout

deny
message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
!acl = acl_local_deny_exceptions
senders = ${if exists{CONFDIR/local_sender_blacklist}\
{CONFDIR/local_sender_blacklist}\
{}}

deny
message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
!acl = acl_local_deny_exceptions
hosts = ${if exists{CONFDIR/local_host_blacklist}\
{CONFDIR/local_host_blacklist}\
{}}

.ifdef CHECK_RCPT_REVERSE_DNS
warn
message = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}})
condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\
{yes}{no}}
.endif

.ifdef CHECK_RCPT_SPF
deny
message = [SPF] $sender_host_address is not allowed to send mail from ${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}. \
Please see http://www.openspf.org/Why?scope=${if def:sender_address_domain {mfrom}{helo}};identity=${if def:sender_address_domain {$sender_address}{$sender_helo_name}};ip=$sender_host_address
log_message = SPF check failed.
!acl = acl_local_deny_exceptions
condition = ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" --helo \"$sender_helo_name\"}\
{no}{${if eq {$runrc}{1}{yes}{no}}}}

defer
message = Temporary DNS error while checking SPF record. Try again later.
condition = ${if eq {$runrc}{5}{yes}{no}}

warn
message = Received-SPF: ${if eq {$runrc}{0}{pass}{${if eq {$runrc}{2}{softfail}\
{${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}{${if eq {$runrc}{6}{none}{error}}}}}}}}}}
condition = ${if <={$runrc}{6}{yes}{no}}

warn
log_message = Unexpected error in SPF check.
condition = ${if >{$runrc}{6}{yes}{no}}

warn
message = X-SPF-Guess: ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" \ --helo \"$sender_helo_name\" --guess true}\
{pass}{${if eq {$runrc}{2}{softfail}{${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}\
{${if eq {$runrc}{6}{none}{error}}}}}}}}}}
condition = ${if <={$runrc}{6}{yes}{no}}

defer
message = Temporary DNS error while checking SPF record. Try again later.
condition = ${if eq {$runrc}{5}{yes}{no}}
.endif

.ifdef CHECK_RCPT_IP_DNSBLS
warn
message = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
dnslists = CHECK_RCPT_IP_DNSBLS
.endif

.ifdef CHECK_RCPT_DOMAIN_DNSBLS
warn
message = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
!senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\
{CONFDIR/local_domain_dnsbl_whitelist}\
{}}
dnslists = CHECK_RCPT_DOMAIN_DNSBLS
.endif

.ifdef CHECK_RCPT_LOCAL_ACL_FILE
.include CHECK_RCPT_LOCAL_ACL_FILE
.endif

accept
domains = +relay_to_domains
endpass
verify = recipient

accept

acl_check_data:

.ifdef CHECK_DATA_VERIFY_HEADER_SYNTAX
deny
message = Message headers fail syntax check
!acl = acl_local_deny_exceptions
!verify = header_syntax
.endif

.ifdef CHECK_DATA_VERIFY_HEADER_SENDER
deny
message = No verifiable sender address in message headers
!acl = acl_local_deny_exceptions
!verify = header_sender
.endif

.ifdef CHECK_DATA_LOCAL_ACL_FILE
.include CHECK_DATA_LOCAL_ACL_FILE
.endif

accept

begin routers

.ifdef MAIN_ALLOW_DOMAIN_LITERALS
domain_literal:
debug_print = "R: domain_literal for $local_part@$domain"
driver = ipliteral
domains = ! +local_domains
transport = remote_smtp
.endif

hubbed_hosts:
debug_print = "R: hubbed_hosts for $domain"
driver = manualroute
domains = "${if exists{CONFDIR/hubbed_hosts}\
{partial-lsearch;CONFDIR/hubbed_hosts}\
fail}"
same_domain_copy_routing = yes
route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}}
transport = remote_smtp

.ifdef DCconfig_internet

dnslookup_relay_to_domains:
debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains : +relay_to_domains
transport = remote_smtp
same_domain_copy_routing = yes
no_more

dnslookup:
debug_print = "R: dnslookup for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
same_domain_copy_routing = yes
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\
255.255.255.255
no_more

.endif

.ifdef DCconfig_local
nonlocal:
debug_print = "R: nonlocal for $local_part@$domain"
driver = redirect
domains = ! +local_domains
allow_fail
data = :fail: Mailing to remote domains not supported
no_more

.endif

.ifdef DCconfig_smarthost DCconfig_satellite

smarthost:
debug_print = "R: smarthost for $local_part@$domain"
driver = manualroute
domains = ! +local_domains
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = defer
same_domain_copy_routing = yes
no_more

.endif

COND_LOCAL_SUBMITTER = "\
${if match_ip{$sender_host_address}{:@[]}\
{1}{0}\
}"

real_local:
debug_print = "R: real_local for $local_part@$domain"
driver = accept
domains = +local_domains
condition = COND_LOCAL_SUBMITTER
local_part_prefix = real-
check_local_user
transport = LOCAL_DELIVERY

system_aliases:
debug_print = "R: system_aliases for $local_part@$domain"
driver = redirect
domains = +local_domains
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
.ifdef SYSTEM_ALIASES_USER
user = SYSTEM_ALIASES_USER
.endif
.ifdef SYSTEM_ALIASES_GROUP
group = SYSTEM_ALIASES_GROUP
.endif
.ifdef SYSTEM_ALIASES_FILE_TRANSPORT
file_transport = SYSTEM_ALIASES_FILE_TRANSPORT
.endif
.ifdef SYSTEM_ALIASES_PIPE_TRANSPORT
pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT
.endif
.ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT
directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT
.endif

.ifdef DCconfig_satellite
hub_user:
debug_print = "R: hub_user for $local_part@$domain"
driver = redirect
domains = +local_domains
data = ${local_part}@DCreadhost
check_local_user

hub_user_smarthost:
debug_print = "R: hub_user_smarthost for $local_part@$domain"
driver = manualroute
domains = DCreadhost
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = defer
same_domain_copy_routing = yes
check_local_user
.endif

userforward:
debug_print = "R: userforward for $local_part@$domain"
driver = redirect
domains = +local_domains
check_local_user
file = $home/.forward
require_files = $local_part:$home/.forward
no_verify
no_expn
check_ancestor
allow_filter
forbid_smtp_code = true
directory_transport = address_directory
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
skip_syntax_errors
syntax_errors_to = real-$local_part@$domain
syntax_errors_text = \
This is an automatically generated message. An error has\n\
been found in your .forward file. Details of the error are\n\
reported below. While this error persists, you will receive\n\
a copy of this message for every message that is addressed\n\
to you. If your .forward file is a filter file, or if it is\n\
a non-filter file containing no valid forwarding addresses,\n\
a copy of each incoming message will be put in your normal\n\
mailbox. If a non-filter file contains at least one valid\n\
forwarding address, forwarding to the valid addresses will\n\
happen, and those will be the only deliveries that occur.

procmail:
debug_print = "R: procmail for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = procmail_pipe
require_files = ${local_part}:\
${if exists{/etc/procmailrc}\
{/etc/procmailrc}{${home}/.procmailrc}}:\
+/usr/bin/procmail
no_verify
no_expn

maildrop:
debug_print = "R: maildrop for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = maildrop_pipe
require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
no_verify
no_expn

.ifndef FIRST_USER_ACCOUNT_UID
FIRST_USER_ACCOUNT_UID = 0
.endif

.ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS
DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts
.endif

COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\
${if and{{! match_ip{$sender_host_address}{:@[]}}\
{<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\
{1}{0}\
}"

lowuid_aliases:
debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)"
check_local_user
driver = redirect
allow_fail
domains = +local_domains
condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER
data = ${if exists{/etc/exim4/lowuid-aliases}\
{${lookup{$local_part}lsearch{/etc/exim4/lowuid-aliases}\
{$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}

local_user:
debug_print = "R: local_user for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
local_parts = ! root
transport = LOCAL_DELIVERY
cannot_route_message = Unknown user

mail4root:
debug_print = "R: mail4root for $local_part@$domain"
driver = redirect
domains = +local_domains
data = /var/mail/mail
file_transport = address_file
local_parts = root
user = mail
group = mail

begin transports

.ifdef HIDE_MAILNAME
REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1@DCreadhost frs : *@ETC_MAILNAME $1@DCreadhost frs
REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}}
.endif

.ifdef REMOTE_SMTP_HELO_FROM_DNS
REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
.endif

address_file:
debug_print = "T: address_file for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add

address_pipe:
debug_print = "T: address_pipe for $local_part@$domain"
driver = pipe
return_fail_output

address_reply:
debug_print = "T: autoreply for $local_part@$domain"
driver = autoreply

mail_spool:
debug_print = "T: appendfile for $local_part@$domain"
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
mode_fail_narrower = false

maildir_home:
debug_print = "T: maildir_home for $local_part@$domain"
driver = appendfile
.ifdef MAILDIR_HOME_MAILDIR_LOCATION
directory = MAILDIR_HOME_MAILDIR_LOCATION
.else
directory = $home/Maildir
.endif
.ifdef MAILDIR_HOME_CREATE_DIRECTORY
create_directory
.endif
.ifdef MAILDIR_HOME_CREATE_FILE
create_file = MAILDIR_HOME_CREATE_FILE
.endif
delivery_date_add
envelope_to_add
return_path_add
maildir_format
.ifdef MAILDIR_HOME_DIRECTORY_MODE
directory_mode = MAILDIR_HOME_DIRECTORY_MODE
.else
directory_mode = 0700
.endif
.ifdef MAILDIR_HOME_MODE
mode = MAILDIR_HOME_MODE
.else
mode = 0600
.endif
mode_fail_narrower = false

maildrop_pipe:
debug_print = "T: maildrop_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/maildrop"
return_path_add
delivery_date_add
envelope_to_add

procmail_pipe:
debug_print = "T: procmail_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add

remote_smtp:
debug_print = "T: remote_smtp for $local_part@$domain"
driver = smtp
.ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_FROM_DNS
helo_data=REMOTE_SMTP_HELO_DATA
.endif

remote_smtp_smarthost:
debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
driver = smtp
hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
{\
${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
}\
{} \
}
.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_FROM_DNS
helo_data=REMOTE_SMTP_HELO_DATA
.endif

address_directory:
debug_print = "T: address_directory for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
check_string = ""
escape_string = ""
maildir_format

begin retry

* * F,2h,15m; G,16h,1h,1.5; F,4d,6h

begin rewrite

.ifndef NO_EAA_REWRITE_REWRITE
*@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail}" Ffrs
*@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail}" Ffrs
.endif

begin authenticators

cram_md5:
driver = cram_md5
public_name = CRAM-MD5
client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}

PASSWDLINE=${sg{\
${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}\
}\
{\\N[\\^]\\N}\
{^^}\
}

plain:
driver = plaintext
public_name = PLAIN
.ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
client_send = "<; ${if !eq{$tls_cipher}{}\
{^${extract{1}{:}{PASSWDLINE}}\
^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}\
}fail}"
.else
client_send = "<; ^${extract{1}{:}{PASSWDLINE}}\
^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.endif

login:
driver = plaintext
public_name = LOGIN
.ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
client_send = "<; ${if and{\
{!eq{$tls_cipher}{}}\
{!eq{PASSWDLINE}{}}\
}\
{}fail}\
; ${extract{1}{::}{PASSWDLINE}}\
; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.else
client_send = "<; ${if !eq{PASSWDLINE}{}\
{}fail}\
; ${extract{1}{::}{PASSWDLINE}}\
; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
.endif

macubex 05-17-2009 09:57 AM

And I strongly believe, due to this reason, my file-sysytem loads as read-only.

This is an urgent problem.
Please somebody help me.

repo 05-17-2009 10:17 AM

try
Code:

cat /dev/null > /var/log/exim4/paniclog
I don' think this is the reason why your filesystem is read only
Boot from a live cd to do the changes, if the system is read only
Any pointers in the boot messages why your system is ro ?


All times are GMT -5. The time now is 07:37 PM.