Can anybody please help me find an OSPF patch file for ns-2.35 kindly?

Regards
Riana

Actually quite simple :
1) $ tar xvf ns-allinone-2.35.tar.gz
2) $ cd ns-allinone-2.35/
3) $ ln -s ns-2.35/ ns-2.34
... Then the patch will work, except for one line. (commom/packet.h).
4) $ patch -p0 < 10-ospf4ns2.34-base.patch
http://sourceforge.net/projects/ospf4ns/
5) Replace commom/packet.h with the attached "packet.h" : Edited by hand.
6) export CC=gcc44 CXX=g++44 && ./install
... Or whatever gcc/g++ version 4.4.x you have available.

? Any questions ? Then please specify your OS :
a) $ uname -m
b) Tell the name and version of your OS.
-

Attached Files

packet.h.txt (24.5 KB, 231 views)

1 members found this post helpful.

http://sourceforge.net/projects/ospf...s/ospf4ns2.34/
>>> 20-ospf4ns2.34-examples.patch

$ cd ns-allinone-2.35/
$ patch -p0 < 20-ospf4ns2.34-examples.patch

Using : $ cd ns-2.35/
# make install

$ cd tcl/ex/ospf/
$ mkdir out_ospf0 out_ospf1 out_ospf2 out_ospf3 out_ospf4 out_ospf5 out_ospf6 out_ospf7 out_ospf8 out_ospf9
$ ns out_ospf0.tcl
... Etc. etc. : All the examples work OK, and will open a 'nam' window.

-

1 members found this post helpful.

I've already copied 10-ospf4ns2.34-base.patch to my ns-2.34 directory. But after that I can't install the file or any of the examples. I replaced the old common/packet.h by the new one.

I get the following messages:

l@ubuntu:~/ns-allinone-2.35/ns-2.34$ patch -p0 < 10-ospf4ns2.34-base.patchThe next patch would create the file ns-2.34/classifier/classifier-mtopology.cc,
which already exists! Assume -R? [n] y
patching file ns-2.34/classifier/classifier-mtopology.cc
The next patch would create the file ns-2.34/classifier/classifier-mtopology.h,
which already exists! Assume -R? [n] n
Apply anyway? [n] y
patching file ns-2.34/classifier/classifier-mtopology.h
Hunk #1 FAILED at 1.
1 out of 1 hunk FAILED -- saving rejects to file ns-2.34/classifier/classifier-mtopology.h.rej
can't find file to patch at input line 92
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- ns-2.34.old/common/agent.cc 2009-06-14 18:35:45.000000000 +0100
|+++ ns-2.34/common/agent.cc 2010-02-26 23:34:33.161063590 +0000

File to patch:

For installation I get these messages:

l@ubuntu:~/ns-allinone-2.35$ export CC=gcc44 CXX=g++44 && ./install

============================================================
* Build Stanford GraphBase
============================================================
Making sgb
gcc44 -g -I/usr/local/sgb/include test_io.c gb_io.o -o test_io
make: gcc44: Command not found
make: *** [test_io] Error 127
Unable to create sgb library, but it's optional, so continuing...
============================================================
* Build GT-ITM
============================================================
gcc -I../include -L../lib -DFBSD -o ../bin/itm itm.o geog.o ts.o dfs.o -lm -lgb
gcc -I../include -L../lib -DFBSD -o ../bin/sgb2alt sgb2alt.o -lm -lgb
gcc -I../include -L../lib -DFBSD -o ../bin/edriver edriver.o eval.o -lm -lgb
gt-itm has been installed successfully.
gcc -I../include -L../lib -o ../bin/sgb2comns sgb2comns.o -lm -lgb
gcc -I../include -L../lib -o ../bin/sgb2hierns sgb2hierns.o -lm -lgb
gcc -I../include -L../lib -o ../bin/sgb2ns sgb2ns.o -lm -lgb
sgb2ns has been installed successfully.
============================================================
* Build zlib
============================================================
Building static library libz.a version 1.2.3 with gcc44.
Checking for unistd.h... No.
Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()
Checking for snprintf() in stdio.h... No.
WARNING: snprintf() not found, falling back to sprintf(). zlib
can build but will be open to possible buffer-overflow security
vulnerabilities.
Checking for return value of sprintf()... No.
WARNING: apparently sprintf() does not return a value. zlib
can build but will be open to possible string-format security
vulnerabilities.
Checking for errno.h... No.
Checking for mmap support... No.
make: Nothing to be done for `all'.
Zlib has been installed successfully.
============================================================
* Build tcl8.5.10
============================================================
configure: WARNING: unrecognized options: --enable-gcc
checking whether to use symlinks for manpages... no
checking whether to compress the manpages... no
checking whether to add a package name suffix for the manpages... no
checking for gcc... gcc44
checking whether the C compiler works... no
configure: error: in `/home/amel/ns-allinone-2.35/tcl8.5.10/unix':
configure: error: C compiler cannot create executables
See `config.log' for more details
tcl8.5.10 configuration failed! Exiting ...
Tcl is not part of the ns project. Please see www.Scriptics.com
to see if they have a fix for your platform.

# 4 .

No reason to try anything at all before you have installed the right compiler.
In later Ubuntu's it is : $ sudo apt-get install g++-4.4

! You were asked to specify your OS. Nothing else.
! So please show the outputs from these commands :
$ uname -m <Enter>
$ cat /etc/issue <Enter>


... Which is the wrong location for the patch. Read post #2 :
Ref. 2) $ cd ns-allinone-2.35/
Ref. 4) $ patch -p0 < 10-ospf4ns2.34-base.patch
.... which means the patch location must be "ns-allinone-2.35/"
.... So please delete everything, and start from scratch with
a new unpacked ns-allinone-2.35.tar.gz .

With the gcc-4.4 / g++-4.4 compilers, the install command is :
$ export CC=gcc-4.4 CXX=g++-4.4 && ./install

-

I am having some problems while installing OSPF and OLSR patches. I thought of undoing everything whatever changes I made according to the errors shown in my terminal and complete whatever I was working on before installing the patches starting from the scratch.

But some of the trace files which worked fine with my awk scripts before, is not showing any output now after I was trying to work with the patches. (though I have deleted the files and directories which was made).

Before this when I did ./validate I had messages like 'all test were passed' but now when I do- ~/ns-allinone-2.35$ ./install it gives-

trace/cmu-trace.cc:57:31: fatal error: um-olsr/OLSR_pkt.h: No such file or directory
#include <um-olsr/OLSR_pkt.h>
^
compilation terminated.
make: *** [trace/cmu-trace.o] Error 1
Ns make failed!

My os is ubuntu 13.10, gcc-4.4 / g++-4.4 is already installed and CC=gcc44 CXX=g++44 was edited by hand from gedit ~/../Makefile.in.

If I bring back the um-olsr/OLSR_pkt.h by doing-

$ cd ns-allinone-2.35/ns-2.35/
$ tar zxvf um-olsr-1.0.tgz
$ ln -s ./um-olsr-1.0 ./olsr
$ patch -p1 < um-olsr/um-olsr_ns-2.35_v1.0.patch (I cannot patch, it shows errors in input line 5 and more...)

$ ./install

I get:

aomdv/aomdv_rqueue.cc:244:13: warning: variable ‘prev’ set but not used [-Wunused-but-set-variable]
Packet *p, *prev = 0;
^
make: *** No rule to make target `olsr/OLSR.o', needed by `ns'. Stop.
Ns make failed!
See http://www.isi.edu/nsnam/ns/ns-problems.html for problems

How can I do the compilation properly as before, with or without the OLSR patch? The um-olsr-1.0.tgz link is:
http://sourceforge.net/projects/um-olsr/
Do I edit the part of olsr/OLSR.o (line 9) of the patch by um-olsr/OLSR.o and remove '+' from (Line 9 Col 1)?
And I don't understand why the awk files with the trace files which worked before is not working now?

# 6 .
Do not edit the Makefile.in, so far concerns the compiler lines.
And the compilers are not gcc44 / g++44 in Ubuntu, but gcc-4.4 / g++-4.4


May be, or may be not the two patches (ospf+olsr) can live together.
A new combined Makefile.in, etc. must be created :
The ospf patching seems to undo some olsr entries / files ?
I will check that later, with Ubuntu 13.10 - 32bits.
Which version is your "13.10" ? 32bits or 64bits ?
( ns2 is for 32bits.)

-

My system was originally ubuntu 13.04 later upgraded to 13.10 (64 bits).
Currently I removed the olsr and ospf parts and reinstalled ns-2.35.

Could you please also tell me one thing about a trace:

s 2.840932087 _1_ AGT --- 0 cbr 512 [0 0 0 0] ------- [1:0 2:0 32 0] [0] 0 1
r 2.853216693 _2_ AGT --- 0 cbr 532 [13a 2 1 800] ------- [1:0 2:0 30 2] [0] 1 1

If in the second square bracket 1:0 and 2:0 are the from node and to node respectively, do I assume these are in the 14th and 15th column i.e $14 and $15 respectively?

And if the third square bracket 0 is the tcp/cbr packet sequence, is this the 18th column?

Appreciating ur responses.......

i meet the same problem too,but when i use the following tips.i do not get what i want .can you help me ?
the problem is following :

(TCL) Creating simulator & trace files...
(TCL) Setting up nodes and links...
(TCL) Configuring traffic objects...
(TCL) Configuring routing protocol...
invalid command name "Agent/rtProto/OSPF"
while executing
"Agent/rtProto/OSPF set helloInterval 1"
(file "ospf0.tcl" line 132)

my email is 1430874835@qq.com thank you !

Re #9.

@knudfl
（https://drive.google.com/file/d/0B7S...89;Destination URL has expired
.i can't reach Can you send me the file by email?
my email is 1430874835@qq.com

@knudfl
Thank you .it's amazing!!