LinuxQuestions.org
Latest LQ Deal: Linux Power User Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 11-18-2004, 09:15 PM   #16
geden
Member
 
Registered: Nov 2004
Distribution: Mandriva ONE/ Kubuntu 8.04
Posts: 61

Rep: Reputation: 15

Lets start over.. reboot into X..KDE I'm going to assume...
bring up a terminal.....type su then your root password to gain root access
type "mcc" at prompt (without quotes), I'm assuming you also installed configuration tools, where at this point, you should have the Mandrakelinux Control Center app on your desktop.
Select the hardware icon ( top center ), the page should now have a hardware icon in the upper left corner...select it. wait a couple seconds for it to do detection of hardware. Now you should have a 2 pane window with your hardware listed in the left pane...scroll down till you see one that says ethernetcard. If its not there then there is a problem ( no compatible driver module available). If it is there then click on the device listed. Now the device info should be in the right pane. At the bottom of the right pane should be two bars , the upper of the two should say "Configure Module" the lower should say "Run config tool". Select the lower one. Now another window should pop up saying "Network and Internet Configuation" with a list of connection types. Select "Lan connection" and click next. The window should now say "Net Device" and two choices, "Manual choice" and whatever card
you have installed. Select your card, click next. Now the page should offer you two choices "Automatic IP(BOOTIP/DHCP) and "Manual Configuration". Select manual, click next. The next window lets you assign your IP and netmask. There are also three boxes, check only "Start at boot", click next. now the window should give you fields to fill in you Host name, make sure the complete host name matches the rest of your network i,e., mybox . mydomain. my domain extenstion, substitute appropriate names. Enter your DNS server info. Take these from one of your other working boxes if need be.(Enter your search domain, ( your home network domain name)
i.e., mydomain. mydomainextension. Enter gateway info, then click next. This window should now say "Zeroconf Host Name", you can just leave this one blank.Click next. Now the window asks you to restart the network, select "Yes" then Next. On next window just click finish. Now log out of your user account and back in. Now what does it do?It should be working. If not I'd recommend a complete reinstall of the operating system. .......Good Luck...
 
Old 11-18-2004, 10:38 PM   #17
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
Even though automatic should work, I have tried configuring it manually exactly according to the Windows XP machine I have sitting next to me. I still get host cannot be found messages. Pinging any IP address outside the router will also not work.

At this point I think I've tried every configuration idea I can think of. And yes, I have spent quite a bit of time in the Mandrake Control Center. The stupid thing just refuses to work. :-(

Would it have to do with the router not being compatible with IPv6? I do see messages in the "dmesg" program that about no router being found that can support IPv6. Is there a way to disable this and drop back to IPv4?
 
Old 11-19-2004, 11:43 AM   #18
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
Anyone else have any ideas? :-( Thanks for all your input so far.
 
Old 11-19-2004, 04:54 PM   #19
mermxx
Member
 
Registered: Apr 2004
Location: Wales
Distribution: rh9, winxp
Posts: 411

Rep: Reputation: 30
i have briefly read through the posts...have u tried the command lspci which will give u an output of pci cards installed...obviously ur card is installed because u can ping some sort of addy ...but it can help to start at the beginning. Run the ICS wizard on your xp machine and let it assign it`s own static addy. then whilst in xp>programs>accessories>command prompt and type ipconfig this will then give u the ip addy of that machine (which u then know to be true) using the same program ping ur router addy. ok then u should have working ip addys for xp and your router. Statically assign ur router addy in your linux machine and then ping both ur router and win xp...ok now you should know both addys and does your router need dhcp? or can u keep it as a static ip addy?
 
Old 11-19-2004, 08:12 PM   #20
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
I did try "lspci" and the card is detected just fine. It shows up without any problems. I did use the "ipconfig /all" command on my Windows XP machine and got the static IP information from it to use on the Linux box. But my Linux box is still unable to connect which really puzzles me. It's almost like it can't access the Linksys router I have.

The router automatically assigns DCHP, so that whole thing should be automatic. :-(
 
Old 11-19-2004, 08:20 PM   #21
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
Ok, let's try this again. New Mandrake install. Can't access router/internet!

I installed Mandrake a few days ago, but have not been able to access the internet. I've tried manual and automatic configuration using the Mandrake Control Center (mcc), to no avail. I've even set static settings to what another Windows XP machine on our network uses (which works just fine), and I still get "host cannot be found" messages. It almost seems like my router can't be reached by Linux for some reason. From what I can tell, my Linksys card is being detected just fine. I used the same card in Windows XP and it worked just fine.

Here are quite a few statistics. Does anything look wrong? My router gateway is 192.168.1.1 and the router itself should assign DCHP. I just don't get why Linux can't see the router. Is Linux really this hard to configure for internet access using a simple router?

Quote:
[root@localhost /]# ping 64.179.4.149
PING 64.179.4.149 (64.179.4.149) 56(84) bytes of data.
From 192.168.1.2 icmp_seq=1 Destination Host Unreachable
From 192.168.1.2 icmp_seq=2 Destination Host Unreachable
From 192.168.1.2 icmp_seq=3 Destination Host Unreachable

[root@localhost /]# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.2 icmp_seq=1 Destination Host Unreachable
From 192.168.1.2 icmp_seq=2 Destination Host Unreachable
From 192.168.1.2 icmp_seq=3 Destination Host Unreachable

[root@localhost /]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:04:5A:6F:E9:03
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::204:5aff:fe6f:e903/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:26 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19 Base address:0x7000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:435 errors:0 dropped:0 overruns:0 frame:0
TX packets:435 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:28338 (27.6 Kb) TX bytes:28338 (27.6 Kb)

[root@localhost /]# lsmod
Module Size Used by
md5 3872 1
ipv6 232352 6
sg 38044 0
st 38616 0
sr_mod 17028 0
sd_mod 16832 0
scsi_mod 114648 4 sg,st,sr_mod,sd_mod
ide-cd 40548 0
cdrom 37184 2 sr_mod,ide-cd
autofs4 14656 2
parport_pc 32832 1
lp 12200 0
parport 38952 2 parport_pc,lp
snd-seq-midi 8160 0
snd-emu10k1-synth 6816 0
snd-emux-synth 36320 1 snd-emu10k1-synth
snd-seq-virmidi 6912 1 snd-emux-synth
snd-seq-midi-emul 7776 1 snd-emux-synth
snd-seq-oss 31232 0
snd-seq-midi-event 7552 3 snd-seq-midi,snd-seq-virmidi,snd-seq-oss
snd-seq 51024 8 snd-seq-midi,snd-emux-synth,snd-seq-virmidi,snd-seq-midi-emul,snd-seq-oss,snd-seq-midi-event
snd-intel8x0 32776 0
gameport 4480 1 snd-intel8x0
snd-mpu401-uart 7072 1 snd-intel8x0
snd-pcm-oss 51812 0
snd-mixer-oss 17952 2 snd-pcm-oss
snd-emu10k1 85508 2 snd-emu10k1-synth
snd-rawmidi 23616 4 snd-seq-midi,snd-seq-virmidi,snd-mpu401-uart,snd-emu10k1
snd-pcm 93156 3 snd-intel8x0,snd-pcm-oss,snd-emu10k1
snd-timer 24484 2 snd-seq,snd-pcm
snd-seq-device 8008 7 snd-seq-midi,snd-emu10k1-synth,snd-emux-synth,snd-seq-oss,snd-seq,snd-emu10k1,snd-rawmidi
snd-ac97-codec 58148 2 snd-intel8x0,snd-emu10k1
snd-page-alloc 11972 3 snd-intel8x0,snd-emu10k1,snd-pcm
snd-util-mem 4448 2 snd-emux-synth,snd-emu10k1
snd-hwdep 8928 2 snd-emux-synth,snd-emu10k1
snd 52484 18 snd-seq-midi,snd-emux-synth,snd-seq-virmidi,snd-seq-oss,snd-seq-midi-event,snd-seq,snd-intel8x0,snd-mpu401-uart,snd-pcm-oss,snd-mixer-oss,snd-emu10k1,snd-rawmidi,snd-pcm,snd-timer,snd-seq-device,snd-ac97-codec,snd-util-mem,snd-hwdep
soundcore 9248 2 snd
af_packet 20520 3
hid 53312 0
floppy 59444 0
ipt_TOS 2240 12
ipt_REJECT 6464 4
ipt_LOG 5312 6
ipt_state 1728 16
ipt_multiport 1856 0
ipt_conntrack 2304 0
iptable_filter 2624 1
iptable_mangle 2624 1
iptable_nat 23116 0
ip_conntrack 31152 3 ipt_state,ipt_conntrack,iptable_nat
ip_tables 16704 9 ipt_TOS,ipt_REJECT,ipt_LOG,ipt_state,ipt_multiport,ipt_conntrack,iptable_filter,iptable_mangle,iptab le_nat
sk98lin 158696 0
tulip 45248 0
ohci1394 33956 0
ieee1394 287856 1 ohci1394
nls_iso8859-1 3904 2
ntfs 85932 2
supermount 37876 3
amd64-agp 10440 1
agpgart 31016 1 amd64-agp
DAC960 72936 0
ehci-hcd 24196 0
ohci-hcd 18692 0
usbcore 99132 5 hid,ehci-hcd,ohci-hcd
rtc 11576 0
reiserfs 246196 1

[root@localhost /]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

[root@localhost /]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

root@localhost /]# dmesg
hdd: max request size: 128KiB
hdd: 40020624 sectors (20490 MB) w/512KiB Cache, CHS=39703/16/63, UDMA(66)
/dev/ide/host0/bus1/target1/lun0: p1
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 3 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
Resume Machine: resuming from /dev/hda5
Resuming from device hda5
Resume Machine: This is normal swap space
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda1) for (hda1)
Using r5 hash to sort names
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 9, pci mem e1825000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 9, pci mem e1827000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 9, pci mem e182b000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
Adding 1285160k swap on /dev/hda5. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xf0000000
Supermount version 2.0.4 for kernel 2.6
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[fb009000-fb0097ff] Max Packet=[4096]
Linux Tulip driver version 1.1.13 (May 11, 2002)
eth0: ADMtek Comet rev 17 at 0x7000, 00:04:5A:6F:E9:03, IRQ 19.
sk98lin: Network Device Driver v6.23
(C)Copyright 1999-2004 Marvell(R).
eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
inserting floppy driver for 2.6.3-7mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49552 usecs
intel8x0: clocking to 46790
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_mux: aa55f00f52ad51(87)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
parport0: cpp_mux: aa55f00f52ad51(87)
parport0: cpp_daisy: aa5500ff(80)
parport0: assign_addrs: aa5500ff(80)
lp0: using parport0 (polling).
lp0: console ready
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Shorewall:net2allROP:IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32770 DPT=7741 LEN=24
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).
bootsplash: status on console 5 changed to on
Shorewall:net2allROP:IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.0 LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=ICMP TYPE=8 CODE=0 ID=36876 SEQ=0
Shorewall:net2allROP:IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=255 DF PROTO=ICMP TYPE=8 CODE=0 ID=36876 SEQ=0
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc674055, CSR12 00000000, resetting...
SCSI subsystem initialized
st: Version 20040122, fixed bufsize 32768, s/g segs 256
NET: Registered protocol family 10
Disabled Privacy Extensions on device c035fe60(lo)
IPv6 over IPv4 tunneling driver
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
eth0: no IPv6 routers present
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
VFS: Can't find ext2 filesystem on dev fd0.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
Shorewall:net2allROP:IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32782 DPT=7741 LEN=24
Shorewall:net2allROP:IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.0 LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=256 DF PROTO=ICMP TYPE=8 CODE=0 ID=47630 SEQ=0
Shorewall:net2allROP:IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=511 DF PROTO=ICMP TYPE=8 CODE=0 ID=47630 SEQ=0
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status fc67c057, CSR12 00000000, resetting...
Any help would be greatly appreciated. Sorry I didn't mention these stats in my last post. I'm fully willing to try anything recommended at this point. Just let me know if you need more information.

I love Linux, but may just go back to Windows if I can't get online. :-/
 
Old 11-19-2004, 08:22 PM   #22
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
FYI, I've posted network data in a new post and tried to explain things better. Sorry for any miscommunication in this thread. I'm pulling my hair out.

http://www.linuxquestions.org/questi...hreadid=257052
 
Old 11-19-2004, 08:24 PM   #23
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
And here is configuration information for the Windows XP machine that I tried to copy:

Quote:
C:\Documents and Settings\Sara xxxxxxxx>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : SARA
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : earthlink.net

Ethernet adapter Network Bridge (Network Bridge) 2:

Connection-specific DNS Suffix . : earthlink.net
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : 02-04-5A-88-09-2E
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 216.165.129.157
134.215.200.126
207.69.188.185
Lease Obtained. . . . . . . . . . : Friday, November 19, 2004 5:35:22 PM

Lease Expires . . . . . . . . . . : Saturday, November 20, 2004 5:35:22
PM
Also, the hosts file even matches exactly with both my Windows XP and Linux machines:

Quote:
127.0.0.1 localhost

Last edited by Mateo1041; 11-19-2004 at 08:25 PM.
 
Old 11-19-2004, 10:51 PM   #24
snutz411
Member
 
Registered: Mar 2004
Distribution: Slackware 10.0
Posts: 55

Rep: Reputation: 15
If you are using Mandrake 10.x then you are having the same problem as i did. I never figured it out, so I went back to 9.1. 10.x seems to not like the internet or something, but 9.1 does, haha. Sorry I couldn't offer anymore than that.
 
Old 11-19-2004, 11:29 PM   #25
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
Maybe I'll try Fedora and see what happens. Is Mandrake 9.1 much different? Thanks for the input. I'll have to try installing a different Linux version/distribution tomorrow and see what happens.

Or maybe they fixed things with Mandrake 10.1?
 
Old 11-20-2004, 10:35 AM   #26
Mateo1041
Member
 
Registered: Nov 2004
Location: New Prague, MN
Posts: 80

Original Poster
Rep: Reputation: 15
I'm now posting this from my new Linux machine and it looks like Fedora Core 3 is definitely the way to go. After all the network problems I experienced with Mandrake, I don't think I'll ever go back to that distribution again. So, this can finally be marked down as solved.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't access internet thru router fpperryaz Linux - Wireless Networking 7 07-17-2005 10:38 AM
Cannot access Internet through SUSE 9.2 Pro router nexangelus Linux - Networking 3 02-08-2005 11:58 AM
Can't access internet through router!!! aXoneX Linux - Networking 21 12-22-2004 04:47 AM
can't access internet via router stormadvisor Linux - Networking 5 11-05-2004 07:36 PM
Internet access through router and wifi connection caudalie Linux - Wireless Networking 3 01-22-2004 04:51 PM


All times are GMT -5. The time now is 01:36 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration