LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 12-09-2003, 09:24 AM   #1
InfernoMan
LQ Newbie
 
Registered: Dec 2003
Location: Poland
Posts: 1

Rep: Reputation: 0
No sound from SB128


I'm using Slackware 9.0. I've enabled modprobe 1371

# ES1371 support, such as Sound Blaster 64V PCI:
/sbin/modprobe es1371

since lspci -vv gives me
Quote:
00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
the ls -al /dev/dsp* gives me
Quote:
crw-rw-rw- 1 root sys 14, 3 lip 18 1994 /dev/dsp
crw-rw-rw- 1 root sys 14, 19 lip 18 1994 /dev/dsp1
here is my dmesg
Quote:
Linux version 2.4.20 (root@midas) (gcc version 3.2.2) #2 Mon Mar 17 22:02:15 PST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
256MB LOWMEM available.
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 562.514 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1123.94 BogoMIPS
Memory: 256248k/262144k available (1733k kernel code, 5512k reserved, 568k data, 112k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vesafb: framebuffer at 0xe0000000, mapped to 0xd080d000, size 32768k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:0f3e
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
hda: ST310212A, ATA DISK drive
hdb: Pioneer CD-ROM ATAPI Model DR-A14S 0104, ATAPI CD/DVD-ROM drive
hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0388784, I/O limit 4095Mb (mask 0xffffffff)
hda: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(33)
hdb: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 < hda5 > hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 931.200 MB/sec
32regs : 558.400 MB/sec
pII_mmx : 1262.800 MB/sec
p5_mmx : 1314.800 MB/sec
raid5: using function: p5_mmx (1314.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 5632
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 5632
FAT: bogus logical sector size 5632
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Adding Swap: 538104k swap-space (priority -1)
es1371: version v0.30 time 15:37:57 Mar 11 2003
PCI: Found IRQ 11 for device 00:0d.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xe800 irq 11
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A)
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 10 for device 00:0b.0
eth0: RealTek RTL8139 Fast Ethernet at 0xd2918000, 00:30:4f:1b:5b:ce, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 12 for device 00:07.2
uhci.c: USB UHCI at I/O 0xe000, IRQ 12
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x3f0/0x7104) is not claimed by any active driver.
Ensoniq AudioPCI soundcard not found or device busy
hub.c: new USB device 00:07.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x4b4/0x1) is not claimed by any active driver.
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
Ensoniq AudioPCI soundcard not found or device busy
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7104
printer.c: v0.11: USB Printer Device Class driver
usb.c: registered new driver usb_mouse
Ensoniq AudioPCI soundcard not found or device busy
input0: 4D Mouse USB Mouse on usb1:3.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
thx for help
 
Old 12-09-2003, 12:37 PM   #2
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 23,067
Blog Entries: 11

Rep: Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910
And what are the mixer settings? :)

And lsmod? soundcore might be missing...

Cheers,
Tink
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
No sound coming from my sound blaster audigy 2 ZS platinum sound card msab Linux - Hardware 9 12-05-2010 05:10 AM
ALSA MIDI: Sound fonts for NVIDIA/NForce Soundstorm on-board sound vharishankar Linux - Hardware 6 09-04-2007 12:37 PM
How to make a sound on Realtec ALC-650 card sound on a Shuttle ST62K? Laurent Linux - Hardware 0 05-30-2004 11:57 AM
No Sound : request_module: failed /sbin/modprobe -- sound-slot-0. error = 256 Mebuh Linux - General 0 01-26-2004 07:51 AM
Can I load both oss (kernel sound drivers) and alsa in 2 sound cared system? cmisip Linux - General 0 04-12-2003 01:27 AM


All times are GMT -5. The time now is 02:25 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration