newbie need help, can't play DVD
Hi,
I can play my audio CDs and also see Data CDs, but when I try to see contents of my DVD or play DVD thru ogle, I get the error : [psethi@localhost ~]$ cd /mnt/cdrom /mnt/cdrom: Input/output error. [psethi@localhost ~]$ ogle -u cli /mnt/cdrom Debug[ogle_nav]: Opening DVD at "/mnt/cdrom" libdvdread: Using libdvdcss version 1.2.6 for DVD access libdvdread: Couldn't find device name. libdvdread: Can't open file VIDEO_TS.IFO. vm: faild to read VIDEO_TS.IFO Any help will be greatly appreciated. Thanks in advance, Pradeep Here is my /etc/fstab [psethi@localhost ~]$ more /etc/fstab /dev/hda5 / ext2 defaults 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hda7 /home ext2 defaults 1 2 none /mnt/cdrom supermount fs=iso9660,dev=/dev/hdc,--,codepage=850, iocharset=iso8859-15,ro,nosuid,umask=0,nodev 0 0 none /mnt/cdrom2 supermount fs=iso9660,dev=/dev/scd0,--,codepage=850 ,iocharset=iso8859-15,nosuid,ro,umask=0,nodev 0 0 none /mnt/floppy supermount fs=vfat,dev=/dev/fd0,--,codepage=850,ioc harset=iso8859-15,nosuid,umask=0,unhide,nodev 0 0 /dev/sda1 /mnt/memory_card auto user,iocharset=iso8859-15,kudzu,codepage=850,noa uto,umask=0,exec 0 0 /dev/hda1 /mnt/windows vfat user,iocharset=iso8859-15,codepage=850,noauto,umask= 0,exec 0 0 none /proc proc defaults 0 0 /dev/hda6 swap swap defaults 0 0 [psethi@localhost ~]$ |
Re: newbie need help, can't play DVD
Quote:
I'm not familiar with Ogle but have you tried another player like mplayer to test it or try? Did you compile and install Ogle or did it come preinstalled? On their FAQ the mention an error something like this, might have a read of it there. http://www.dtek.chalmers.se/groups/dvd/faq.shtml |
you are trying to use the mountpoint as the dvd itself, which is wrong, apps like this aren't fstab aware.... so use the /dev/hdc block device, however that is done in ogle...
|
Thanks for the reply, but when I try to use /dev/dvd, it gives error 'Could not open device'
psethi@localhost ~]$ ogle -u cli Debug[ogle_vout]: CLK_TCK: 100 Debug[ogle_nav]: Opening DVD at "/dev/dvd" libdvdread: Using libdvdcss version 1.2.6 for DVD access libdvdread: Could not open device with libdvdcss. libdvdread: Can't open /dev/dvd for reading vm: faild to open/read the DVD when I use /dev/hdc, same error : [psethi@localhost ~]$ ogle -u cli /dev/hdc Debug[ogle_vout]: CLK_TCK: 100 Debug[ogle_nav]: Opening DVD at "/dev/hdc" libdvdread: Using libdvdcss version 1.2.6 for DVD access libdvdread: Could not open device with libdvdcss. libdvdread: Can't open /dev/hdc for reading vm: faild to open/read the DVD When I run xine, and then click open disc..., it just crashes ... any suggestions ? |
well IS that your dvd drive? i'm only assuming it is... also try with mplayer (actually that probably won't make any difference, as it's all using the same gubbins in the background, libdvdread)
|
I have two drives, 1st is DVD, and second is a CD RW, right now, I am only trying to set up 1st one to play audio CDs and to watch DVD.
I think it is the drive, because a), when I play audio CDs in that drive, it shows /mnt/cdrom in kscd. sorry , but I am totally newbie for devices and mounting and might be doing something totally wrong. here is my dmesg : [psethi@localhost ~]$ dmesg Linux version 2.4.21-0.13mdk (flepied@bi.mandrakesoft.com) (gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013800000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 312MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 79872 zone(0): 4096 pages. zone(1): 75776 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=305 devfs=mount hdd=ide-scsi acpi=off quiet ide_setup: hdd=ide-scsi No local APIC present or hardware disabled Initializing CPU#0 Detected 533.544 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1064.96 BogoMIPS Memory: 312616k/319488k available (1410k kernel code, 6484k reserved, 1118k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 ACPI: Subsystem revision 20030122 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xfa184, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Disabling Via external APIC routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0x40000000, mapped to 0xd4000000, size 8192k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: protected mode interface info at c000:604e vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 25593 bytes). Console: switching to colour frame buffer device 80x16 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A PCI: Found IRQ 10 for device 00:0a.0 Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (134d,7897,134d,0001) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 14) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0x1480-0x1487, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1488-0x148f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 93071U6, ATA DISK drive hda: DMA disabled blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff) hdc: Compaq DVD-ROM DRD-8080B, ATAPI CD/DVD-ROM drive hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive hdc: DMA disabled hdd: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=3877/240/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 46k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003 usb-uhci.c: High bandwidth mode enabled PCI: Assigned IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 usb-uhci.c: USB UHCI at I/O 0x1440, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:07.3 PCI: Sharing IRQ 11 with 00:07.2 usb-uhci.c: USB UHCI at I/O 0x1460, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error Adding Swap: 249440k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LG Model: CD-RW CED-8080B Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 hdc: ATAPI 27X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 ohci1394: $Rev: 693 $ Ben Collins <bcollins@debian.org> PCI: Found IRQ 5 for device 00:09.0 PCI: Sharing IRQ 5 with 00:0d.0 ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[41100000-411007ff] Max Packet=[2048] ieee1394: SelfID completion called outside of bus reset! ieee1394: Host added: Node[00:1023] GUID[0001080038000986] [Linux OHCI-1394] 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 3 for device 00:08.0 PCI: Sharing IRQ 3 with 01:00.0 eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xd498e000, 00:40:05:8a:fc:a4, IRQ 3 eth0: Identified 8139 chip type 'RTL-8139C' inserting floppy driver for 2.4.21-0.13mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray eth0: Setting half-duplex based on auto-negotiated partner ability 0000. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). maestro3: version 1.23 built at 15:30:15 Mar 14 2003 PCI: Found IRQ 5 for device 00:0d.0 PCI: Sharing IRQ 5 with 00:09.0 maestro3: Configuring ESS Allegro found at IO 0x1000 IRQ 5 maestro3: subvendor id: 0xb2070e11 ac97_codec: AC97 Audio codec, id: 0x4583:0x8308 (ESS Allegro ES1988) Splash status on console 0 changed to off cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. |
Assuming you have automount turned on, install all 5 required packages for ogle, then put a dvd in the drive and run ogle (no switches).
You can get the 5 installs and the install order for mandrake 9.1 << here >> enjoy. |
with me /dev/dvd is just a symlink to /dev/cdrom...
|
All times are GMT -5. The time now is 01:28 AM. |