need help configuring an alix testbed
Hi im relatively new to linux. I have a university project that consists of configuring an alix wireless testbed so that it has a basic wireless mesh implementation on it routed using the B.A.T.M.A.N routing protocol. I have to use the voyage software which has to be put onto compact flash (which i dont know how to do).
I am really struggling as i have never used let alone configure one of these testbeds before so any information (even if u believe it to be too easy or simple) would be greatly appreciated. |
I am running voyage in an ALIX and the setup is really easy. this is what i did
-in a system running debian squeeze i downloaded the file http://www.voyage.hk/download/voyage...-0.9.2.tar.bz2 -extract the file with tar --numeric-owner -jxvf voyage-.tar.bz2 -C /tmp -i created a folder in mnt mkdir /mnt/cf -i entered the directory that i extracted cd /tmp/voyag* -then in an external usb adaptor i plugged the cf card (minimum 512mb) -fdisk -l to see the drive number. if it is mounted the unmount it. in my case is /dev/sdb1 -then ./usr/local/sbin/format-cf.sh /dev/sdb (while in the /tmp/voyag* folder) and press enter to autoformat the drive to ext2. -once done then tune2fs -r 0 -c 0 /dev/sdb1 -then ./usr/local/sbin/voyage.update this will ask you a few questions. you have to change the drive letter from /dev/hde to /dev/sdb and chage the default system to ALIX after that is default everything. -once done unplug the cf card and plug it to the ALIX and power it up. -if you have a console cable plugged then it will show you the output. -once booted then you will come up with a system in read only by default. to update/install you need to do a remountro best of luck. |
All times are GMT -5. The time now is 08:00 AM. |