LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (http://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   Mplayer fine tuning (http://www.linuxquestions.org/questions/linux-newbie-8/mplayer-fine-tuning-161045/)

Harp00 03-22-2004 02:47 PM

Mplayer fine tuning
 
Hi i installed and configured Mplayer, and everything seems to works good.
The only little problem is that i would like to start it in full screen without Xscreensaver as i can choose from the settings just right click over its screen.
It says that to make my preferences working i have to restart Mplayer but when i do it, my preferences are ignored: no full screen Xscreensaver every five minutes.
Does it probably miss a config file?

This is what it write when i run a .avi file:


:~$ gmplayer
MPlayer 1.0pre2-3.2.3 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 2093 MHz (Family: 6, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/franco/.mplayer/config
[cfg] read config file: /home/franco/.mplayer/gui.conf
Reading config file /home/franco/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
xscreensaver_disable: Could not find xscreensaver window.
Reading /home/franco/.mplayer/codecs.conf: Can't open '/home/franco/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf
Font /usr/local/share/mplayer/font/font-arial-cp1250/font-arial-14-cp1250/font.desc loaded successfully! (233 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using usleep() timing
Can't open input config file /home/franco/.mplayer/input.conf: No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
SKIN dir 1: '/home/franco/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

Playing /home/franco/MP3/home/frakko/Musica/FILES/Roger Waters - In The Flesh Tour.avi
AVI file format detected.
VIDEO: [DX50] 352x288 24bpp 25.000 fps 652.6 kbps (79.7 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 20000->176400 (160.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Trying to force video codec driver family xanim ...
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
alsa-init: requested format: 44100 Hz, 2 channels, Signed 16-bit (Little-Endian)
alsa-init: 1 soundcard found, using: hw:0,0
alsa9: 44100 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa9] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 352 x 288 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.22:1 - prescaling to correct movie aspect.
VO: [xv] 352x288 => 352x288 Planar YV12
xscreensaver_disable: Could not find xscreensaver window.
alsa-uninit: pcm closed-0.000 ct: 0.075 116/116 4% 1% 1.8% 1 0 0%

Exiting... (Exit)

Probably i have only to improve my english.

Any helps?

Thank you in advance.


All times are GMT -5. The time now is 10:45 AM.