LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 01-17-2008, 02:25 AM   #1
ajeetraina
Member
 
Registered: Jun 2007
Location: India
Distribution: Ubuntu,Red Hat, Fedora
Posts: 292

Rep: Reputation: 30
Mounting the Mobile USB to ubuntu 7.10???


Hi

while running the command lsusb i could able to locate the mobile phone in the usb2 (see the attachement). Please help me how to configure this in /dev/ttyUSB0

The output of lusb:
solver@solverminds21:~$ lsusb
Bus 001 Device 002: ID 0421:042e Nokia Mobile Phones
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
---------------------------------------------
The dmesg output:
------------------------------
solver@solverminds21:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000001f6f0000 - 000000001f6fa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f6fa000 - 000000001f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6500
[ 0.000000] Entering add_active_range(0, 0, 128752) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128752
[ 0.000000] HighMem 128752 -> 128752
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128752
[ 0.000000] On node 0 totalpages: 128752
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 973 pages used for memmap
[ 0.000000] Normal zone: 123683 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6590 checksum 0
[ 0.000000] ACPI: RSDP 000F6590, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1F6F4DB8, 0038 (r1 PTLTD RSDT 60400D0 LTP 0)
[ 0.000000] ACPI: FACP 1F6F9E9C, 0074 (r1 IBM THINKCEN 60400D0 PTL 1)
[ 0.000000] ACPI: DSDT 1F6F4DF0, 50AC (r1 IBM THINKCEN 60400D0 MSFT 100000E)
[ 0.000000] ACPI: FACS 1F6FAFC0, 0040
[ 0.000000] ACPI: TCPA 1F6F9F10, 0032 (r1 IBM THINKCEN 60400D0 PTL 1)
[ 0.000000] ACPI: APIC 1F6F9F42, 005A (r1 PTLTD APIC 60400D0 LTP 0)
[ 0.000000] ACPI: BOOT 1F6F9F9C, 0028 (r1 PTLTD $SBFTBL$ 60400D0 LTP 1)
[ 0.000000] ACPI: MCFG 1F6F9FC4, 003C (r1 PTLTD MCFG 60400D0 LTP 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 127747
[ 0.000000] Kernel command line: root=UUID=8f7393a4-5f8d-40a4-b7a8-acf94ea004fe ro quiet splash locale=en_US
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2660.277 MHz processor.
[ 9.564352] Console: colour VGA+ 80x25
[ 9.564542] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.564738] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 9.573297] Memory: 498700k/515008k available (2015k kernel code, 15660k reserved, 916k data, 364k init, 0k highmem)
[ 9.573308] virtual kernel memory layout:
[ 9.573310] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 9.573311] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.573312] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 9.573313] lowmem : 0xc0000000 - 0xdf6f0000 ( 502 MB)
[ 9.573314] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 9.573316] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 9.573317] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 9.573320] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.573358] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 9.653185] Calibrating delay using timer specific routine.. 5325.43 BogoMIPS (lpj=10650873)
[ 9.653210] Security Framework v1.0.0 initialized
[ 9.653215] SELinux: Disabled at boot.
[ 9.653228] Mount-cache hash table entries: 512
[ 9.653355] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[ 9.653364] monitor/mwait feature present.
[ 9.653367] using mwait in idle threads.
[ 9.653374] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 9.653377] CPU: L2 cache: 1024K
[ 9.653379] CPU: Hyper-Threading is disabled
[ 9.653382] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000000
[ 9.653392] Compat vDSO mapped to ffffe000.
[ 9.653409] Checking 'hlt' instruction... OK.
[ 9.669244] SMP alternatives: switching to UP code
[ 9.669401] Freeing SMP alternatives: 11k freed
[ 9.669690] Early unpacking initramfs... done
[ 9.998829] ACPI: Core revision 20070126
[ 9.998895] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.003595] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 01
[ 10.003636] Total of 1 processors activated (5325.43 BogoMIPS).
[ 10.003793] ENABLING IO-APIC IRQs
[ 10.003977] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.148026] Brought up 1 CPUs
[ 10.148143] Booting paravirtualized kernel on bare hardware
[ 10.148213] Time: 11:47:44 Date: 00/17/108
[ 10.148234] NET: Registered protocol family 16
[ 10.148322] EISA bus registered
[ 10.148337] ACPI: bus type pci registered
[ 10.148745] PCI: PCI BIOS revision 2.10 entry at 0xfd95d, last bus=10
[ 10.148747] PCI: Using configuration type 1
[ 10.148749] Setting up standard PCI resources
[ 10.162530] ACPI: EC: Look up EC in DSDT
[ 10.171611] ACPI: Interpreter enabled
[ 10.171614] ACPI: (supports S0 S1 S3 S4 S5)
[ 10.171639] ACPI: Using IOAPIC for interrupt routing
[ 10.189885] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.189894] PCI: Probing PCI hardware (bus 00)
[ 10.190457] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 10.190462] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 10.190843] PCI: Transparent bridge - 0000:00:1e.0
[ 10.190885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.191308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 10.191448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[ 10.259109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 10.259229] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 10.259345] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 10.259461] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 10.259581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 10.259702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 10.259829] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 10.259950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 10.260055] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.260071] pnp: PnP ACPI init
[ 10.260080] ACPI: bus type pnp registered
[ 10.274685] pnp: PnP ACPI: found 14 devices
[ 10.274688] ACPI: ACPI bus type pnp unregistered
[ 10.274692] PnPBIOS: Disabled by ACPI PNP
[ 10.274741] PCI: Using ACPI for IRQ routing
[ 10.274745] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.285826] NET: Registered protocol family 8
[ 10.285829] NET: Registered protocol family 20
[ 10.285895] pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 10.285899] pnp: 00:01: iomem range 0xfebffc00-0xfebfffff has been reserved
[ 10.285902] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 10.285906] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 10.287646] Time: tsc clocksource has been installed.
[ 10.316191] PCI: Bridge: 0000:00:1c.0
[ 10.316193] IO window: disabled.
[ 10.316199] MEM window: d0000000-d00fffff
[ 10.316203] PREFETCH window: disabled.
[ 10.316209] PCI: Bridge: 0000:00:1e.0
[ 10.316211] IO window: disabled.
[ 10.316216] MEM window: disabled.
[ 10.316220] PREFETCH window: disabled.
[ 10.316249] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 10.316257] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.316269] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.316281] NET: Registered protocol family 2
[ 10.355510] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 10.355546] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 10.355670] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 10.355742] TCP: Hash tables configured (established 16384 bind 16384)
[ 10.355745] TCP reno registered
[ 10.367584] checking if image is initramfs... it is
[ 10.818352] Switched to high resolution mode on CPU 0
[ 11.009341] Freeing initrd memory: 7351k freed
[ 11.009453] Simple Boot Flag at 0x35 set to 0x1
[ 11.009788] audit: initializing netlink socket (disabled)
[ 11.009803] audit(1200570464.112:1): initialized
[ 11.012078] VFS: Disk quotas dquot_6.5.1
[ 11.012138] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.012233] io scheduler noop registered
[ 11.012236] io scheduler anticipatory registered
[ 11.012238] io scheduler deadline registered
[ 11.012256] io scheduler cfq registered (default)
[ 11.012270] Boot video device is 0000:00:02.0
[ 11.012504] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.012552] assign_interrupt_mode Found MSI capability
[ 11.012556] Allocate Port Service[0000:00:1c.0cie00]
[ 11.012596] Allocate Port Service[0000:00:1c.0cie02]
[ 11.012758] isapnp: Scanning for PnP cards...
[ 11.363922] isapnp: No Plug & Play device found
[ 11.391091] Real Time Clock Driver v1.12ac
[ 11.391189] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.391294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.392010] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 11.392831] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.393044] input: Macintosh mouse button emulation as /class/input/input0
[ 11.393141] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12
[ 11.395768] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.395775] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.395980] mice: PS/2 mouse device common for all mice
[ 11.396106] EISA: Probing bus 0 at eisa.0
[ 11.396115] Cannot allocate resource for EISA slot 1
[ 11.396121] Cannot allocate resource for EISA slot 3
[ 11.396139] EISA: Detected 0 cards.
[ 11.396223] TCP cubic registered
[ 11.396236] NET: Registered protocol family 1
[ 11.396261] Using IPI No-Shortcut mode
[ 11.396401] Magic number: 8:646:782
[ 11.396547] hash matches device ptyq4
[ 11.396816] Freeing unused kernel memory: 364k freed
[ 11.440903] input: AT Translated Set 2 keyboard as /class/input/input1
[ 12.586459] AppArmor: AppArmor initialized<5>audit(1200570465.612:2): type=1505 info="AppArmor initialized" pid=1134
[ 12.592867] fuse init (API version 7.8)
[ 12.597511] Failure registering capabilities with primary security module.
[ 12.619064] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 12.620631] ACPI: Thermal Zone [THM0] (60 C)
[ 13.099223] usbcore: registered new interface driver usbfs
[ 13.099252] usbcore: registered new interface driver hub
[ 13.099276] usbcore: registered new device driver usb
[ 13.100150] USB Universal Host Controller Interface driver v3.0
[ 13.100214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 13.100225] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.100230] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.100375] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 13.100406] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00003440
[ 13.100526] usb usb1: configuration #1 chosen from 1 choice
[ 13.100561] hub 1-0:1.0: USB hub found
[ 13.100567] hub 1-0:1.0: 2 ports detected
[ 13.174286] SCSI subsystem initialized
[ 13.180320] libata version 2.21 loaded.
[ 13.256541] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[ 13.256557] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 13.256562] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.256588] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 13.256624] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.256631] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 13.256639] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xd03c0000
[ 13.260525] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.260608] usb usb2: configuration #1 chosen from 1 choice
[ 13.260638] hub 2-0:1.0: USB hub found
[ 13.260646] hub 2-0:1.0: 6 ports detected
[ 13.344834] FDC 0 is a post-1991 82077
[ 13.365149] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 13.365163] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 13.365167] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 13.365201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 13.365232] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003460
[ 13.365350] usb usb3: configuration #1 chosen from 1 choice
[ 13.365385] hub 3-0:1.0: USB hub found
[ 13.365393] hub 3-0:1.0: 2 ports detected
[ 13.467968] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 13.467982] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 13.467987] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 13.468014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 13.468046] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003480
[ 13.468151] usb usb4: configuration #1 chosen from 1 choice
[ 13.468186] hub 4-0:1.0: USB hub found
[ 13.468192] hub 4-0:1.0: 2 ports detected
[ 13.573560] tg3.c:v3.77 (May 31, 2007)
[ 13.573589] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 13.573602] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 13.613328] eth0: Tigon3 [partno(BCM95751F) rev 4101 PHY(5750)] (PCI Express) 10/100Base-TX Ethernet 00:14:85:a5:63:d6
[ 13.613337] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 13.613341] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 13.613360] ata_piix 0000:00:1f.2: version 2.11
[ 13.613365] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 13.767114] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[ 13.767154] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 13.767239] scsi0 : ata_piix
[ 13.767299] scsi1 : ata_piix
[ 13.767418] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000134d0 irq 14
[ 13.767423] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000134d8 irq 15
[ 13.930882] ata1.00: ATA-7: WDC WD800JD-08LSA0, 07.01D07, max UDMA/133
[ 13.930887] ata1.00: 156312576 sectors, multi 16: LBA48
[ 13.938865] ata1.00: configured for UDMA/133
[ 14.282083] ata2.00: ATAPI: TSSTcorp CD-ROM TS-H192C, IB00, max UDMA/33
[ 14.477601] ata2.00: configured for UDMA/33
[ 14.477717] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-08LS 07.0 PQ: 0 ANSI: 5
[ 14.478910] scsi 1:0:0:0: CD-ROM TSSTcorp CD-ROM TS-H192C IB00 PQ: 0 ANSI: 5
[ 14.494605] sd 0:0:0:0: [sda] 156312576 512-byte hardware sectors (80032 MB)
[ 14.494626] sd 0:0:0:0: [sda] Write Protect is off
[ 14.494630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.494652] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.494716] sd 0:0:0:0: [sda] 156312576 512-byte hardware sectors (80032 MB)
[ 14.494729] sd 0:0:0:0: [sda] Write Protect is off
[ 14.494732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 14.494752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.494756] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 14.537074] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.543220] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.543356] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 14.565871] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 14.565877] Uniform CD-ROM driver Revision: 3.20
[ 14.566117] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 14.913639] Attempting manual resume
[ 14.913644] swsusp: Resume From Partition 8:6
[ 14.913646] PM: Checking swsusp image.
[ 14.913834] PM: Resume from disk failed.
[ 14.946644] kjournald starting. Commit interval 5 seconds
[ 14.946655] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.745633] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.822548] agpgart: Detected an Intel 915G Chipset.
[ 21.822946] agpgart: Detected 7932K stolen memory.
[ 21.840849] agpgart: AGP aperture is 256M @ 0xc0000000
[ 22.015983] intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
[ 22.015986] don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
[ 22.015988] you are certain that your <4>intel_rng: system has a functional
[ 22.015990] RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
[ 22.027072] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.029191] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.459050] iTCO_vendor_support: vendor-support=0
[ 22.460134] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 22.908333] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 22.910456] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
[ 22.910474] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 22.911162] pnp: Device 00:08 disabled.
[ 22.911169] parport_pc: probe of 00:08 failed with error -22
[ 22.911394] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x1060)
[ 22.911441] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.911598] input: PC Speaker as /class/input/input3
[ 23.331569] intel8x0_measure_ac97_clock: measured 52404 usecs
[ 23.331573] intel8x0: clocking to 48000
[ 23.926158] lp: driver loaded but no devices found
[ 23.953157] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 23.953391] EXT3 FS on sda3, internal journal
[ 26.150703] No dock devices found.
[ 26.360072] input: Power Button (FF) as /class/input/input4
[ 26.364006] ACPI: Power Button (FF) [PWRF]
[ 26.401970] input: Power Button (CM) as /class/input/input5
[ 26.405923] ACPI: Power Button (CM) [PWRB]
[ 28.681989] ppdev: user-space parallel port driver
[ 28.808857] audit(1200550682.932:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4537 profile="/usr/sbin/cupsd"
[ 29.577041] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 29.577046] tg3: eth0: Flow control is on for TX and on for RX.
[ 31.562142] IBM machine detected. Enabling interrupts during APM calls.
[ 31.562148] apm: BIOS not found.
[ 31.831520] NET: Registered protocol family 10
[ 31.831691] lo: Disabled Privacy Extensions
[ 33.775821] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 33.846489] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 33.866252] NFSD: starting 90-second grace period
[ 35.191993] Failure registering capabilities with primary security module.
[ 37.055213] [drm] Initialized drm 1.1.0 20060810
[ 37.080595] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 37.082885] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 39.896537] NET: Registered protocol family 17
[ 54.674736] eth0: no IPv6 routers present
solver@solverminds21:~$


----------------------------------------------------
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Mounting USB HDD in Ubuntu 6.10 LiveCD MarkB2007 Linux - Newbie 13 12-21-2007 10:33 PM
LXer: Ubuntu advances its mobile and embedded project LXer Syndicated Linux News 0 06-12-2007 08:46 AM
LXer: Ubuntu for Mobile Internet Devices LXer Syndicated Linux News 0 06-07-2007 03:16 PM
LXer: Ubuntu mobile shows off its code LXer Syndicated Linux News 0 05-14-2007 03:01 PM
mounting usb drives on Enlightenment 16 ubuntu Fice Linux - Hardware 3 09-03-2006 07:23 AM


All times are GMT -5. The time now is 01:17 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration