Mandriva 2008 do not boot properly
 

Have installed Mandriva 2008 on Mecer notebook EAA-89, on reboot system fail hafway with the error message on verbose
CP I Error (psargs-0355) : [BRTW] Namespace lookup failure, AE_NOT_FOUND
ACP I Error (psparse-0537) : Method parse/execution failed [\_SB_.PCI0.GFX0.DD03._BCM] (Node f7fe1b80), AE_NOT_FOUND

Others showing OK. But freezes here.
Some suggestions please?.

mercer is not mentioned in Mdv HCL
http://www.mandriva.com/en/hardware

but an old bug similar to yours does exist for a diff hw
https://qa.mandriva.com/show_bug.cgi?id=26083

but this may not be the only issue.

there are a couple of ways of seeing if this is one of the issues.

assuming you installed grub at mbr...when grub starts press escape to stop timer.
go down to the line you want to run and press E for edit.
press the right arrow or left to navigate to options
kernel /boot/vmlinuz (version) root=/dev/sda1 .....options are here

I do not have a laptop but delete all options except you will add in
noapci

then escape and press enter and see if it boots....if it does with no further errors you need to make that permanent change.

However, when you installed....did you choose a laptop kernel?

so once booted install laptop kernel and make that your default boot.

2) If you can not get in that way....let me know if you have a live cd or just the install cd....and name what you have pls.

I should make clear that a laptop needs power management so the laptop kernel is the way to go....and it should enable acpi....otherwise you have to use the older apm

Thanks for response, not working yet.
I have a Live Mandriva 2008 dvd.
Mecer - Mustek EAA-89 notebook.
Have tried on previous model notebook work 100%, but not on above.