mandrake 10 wont detect my soundcard
mandrake 10 wont detect my sound card i have an nforce sound card i need help with it please help
|
How do you know this? What have you tried to do to detect the card? What is the error message you get at boot, or when you try to examine the card in HardDrake or when you try to play a sound?
Could you open a terminal, type dmesg and post the contents here (don't worry about how long it is; we don't mind)? |
do a
Code:
dmesg |
this is what i get
Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandr
ake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) BIOS-e820: 000000001bff0000 - 000000001bff3000 (ACPI NVS) BIOS-e820: 000000001bff3000 - 000000001c000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 447MB LOWMEM available. On node 0 totalpages: 114672 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 110576 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 FIC ) @ 0x000f7ba0 ACPI: RSDT (v001 FIC AU31 0x42302e31 AWRD 0x00000000) @ 0x1bff3000 ACPI: FADT (v001 FIC AU31 0x42302e31 AWRD 0x00000000) @ 0x1bff3040 ACPI: MADT (v001 FIC AU31 0x42302e31 AWRD 0x00000000) @ 0x1bff6dc0 ACPI: DSDT (v001 FIC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux ro root=306 devfs=mount acpi=ht resum e=/dev/hda5 splash=silent bootsplash: silent mode. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 2171.795 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Memory: 450028k/458688k available (1816k kernel code, 7892k reserved, 849k data, 272k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4292.60 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 53k freed CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 3000+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2171.0187 MHz. ..... host bus clock speed is 334.0028 MHz. NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfbcd0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040211 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered primary peer bus ff [IRQ] PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0 PCI: IRQ 0 for device 0000:01:08.0 doesn't match PIRQ mask - try pci=usepirqmask spurious 8259A interrupt: IRQ7. vesafb: framebuffer at 0xe0000000, mapped to 0xdc800000, size 16384k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:a9a0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 14856 bytes , found (800x600, 14808 bytes, v3). Console: switching to colour frame buffer device 92x32 pty: 1024 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: IRQ 0 for device 0000:01:08.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: No IRQ known for interrupt pin A of device 0000:01:08.0. Please try using p ci=biosirq. ttyS1 at I/O 0xc028 (irq = 0) is a 8250 ttyS2 at I/O 0xc040 (irq = 0) is a 8250 ttyS3 at I/O 0xc050 (irq = 0) is a 8250 ttyS4 at I/O 0xc060 (irq = 0) is a 8250 ttyS5 at I/O 0xc070 (irq = 0) is a 8250 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: HDS722516VLAT20, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LITE-ON CD-ROM LTN-487T, ATAPI CD/DVD-ROM drive hdd: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 BIOS EDD facility v0.13 2004-Mar-09, 1 devices found Please report your BIOS at http://linux.dell.com/edd/results.html Resume Machine: resuming from /dev/hda5 Resuming from device hda5 Resume Machine: This is normal swap space PM: Reading pmdisk image. PM: Resume from disk failed. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Mounted devfs on /dev Freeing unused kernel memory: 272k freed Real Time Clock Driver v1.12 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try using p ci=biosirq. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 s etup! PCI: No IRQ known for interrupt pin B of device 0000:00:02.1. Please try using p ci=biosirq. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 s etup! PCI: No IRQ known for interrupt pin C of device 0000:00:02.2. Please try using p ci=biosirq. drivers/usb/core/hcd-pci.c: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.2 s etup! Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1 NTFS driver 2.1.6 [Flags: R/O MODULE]. NTFS volume version 3.1. forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.23. PCI: Setting latency timer of device 0000:00:04.0 to 64 eth0: forcedeth.c: subsystem: 01509:904d bound to 0000:00:04.0 inserting floppy driver for 2.6.3-7mdk floppy0: no floppy controllers found hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver NET: Registered protocol family 17 PCI: No IRQ known for interrupt pin A of device 0000:00:06.0. Please try using p ci=biosirq. unable to grab IRQ 0 Intel ICH: probe of 0000:00:06.0 failed with error -16 mtrr: 0xe0000000,0x4000000 overlaps existing 0xe0000000,0x1000000 bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 0 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 1 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 2 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 3 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 4 changed to on bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes , v3). bootsplash: status on console 5 changed to on inserting floppy driver for 2.6.3-7mdk floppy0: no floppy controllers found inserting floppy driver for 2.6.3-7mdk floppy0: no floppy controllers found inserting floppy driver for 2.6.3-7mdk floppy0: no floppy controllers found SCSI subsystem initialized st: Version 20040122, fixed bufsize 32768, s/g segs 256 NET: Registered protocol family 10 Disabled Privacy Extensions on device c035fe60(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present |
wow
|
Yep. Gotta agree with ya there, Jengo.
But there is in fact no sound card detected, unless it's one of the many unknown devices that are appearing. Assuming this is onboard sound, about the best idea I can come up with is a trip to the nVidia site, to get the latest nForce drivers for the mobo, which hopefully would fix many of the problems dmesg seems to be revealing. |
All times are GMT -5. The time now is 09:16 PM. |