Logitech mouseman wheel
Yes folks, yet another mousethread!
I have searched the forums and not found a solution yet. Chanses are i missed something, but here goes: I've got an optical USB Logitech Mouseman Wheel. It has , besides the (not so) nifty wheel three buttons. I dont use the USB other than through the ps/2 adapter that comes with it. I use red hat 7.1 sharing the computer with winXPpro. Needless to say, I have no mouseproblems in windows. (As horrid a thought that might be...). Now to my troubles. The wheel doesn't work. That seems to be a normal state for most distros. Trouble is none of the MANY helpful things I've read on the net seems to do the trick. I have changed the protocol from ps/2 to imps/2. That caused the mouse to go out of control. Some said that this was fixed by killing gpm, but that didn't help, so no more of that. I currently use the MouseManPlusPs/2 protocol. Also I fiddled about with the number of buttons to no avail. Still no wheel. Seems to work fine otherwise. Does anyone out there have a clue that has nothing to do with the protocol/Z-axis-stuff? :::::::::::::::::::::::::Here is the /etc/X11/XF86Config-4 ::::::::::::::::::::::: Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "MouseManPlusPS/2" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection ::::::::::::::::::::And here is the etc/X11/XF86Config:::::::::::::::::::::::::::: # Pointer section # ********************************************************************** Section "Pointer" Protocol "MouseManPlusPS/2" Device "/dev/mouse" # For wheel support - can not be used with Emulate3Buttons ZAxisMapping 4 5 # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Emulate3Buttons # Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle Phew! If you've read all this; thanx. If you think you can help; Spiffey! /Magnus |
Well, my Logitech Mouseman runs as a usb device under Mandrake 9.0 here's the section in the config file -
Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/usbmouse" Option "ZAxisMapping" "4 5" EndSection Any help? |
this might help. go to the fourth post.
http://www.linuxquestions.org/questi...threadid=45284 good luck |
Thanx, but already tried fiddling about with the number of buttons and zaxis. I suppose that the USB might work, but I really want the ps/2 connection. I'll try Mandrake 9.0 now, since I also have problems with the dreaded integrated ac97 on my mobo.
Seems scary too, though, as the install procedure for mdk9.0 freezes when searching for scsi devices. (i have a card used only for an old zip-drive). Seems U can get around that problem by going for the 'expert noauto' - option, though. Tricky still. On the other hand; I have yet not had a perfect install with either red hat or mdk. Blabbing away here... Thanks for trying. |
All times are GMT -5. The time now is 08:34 PM. |