LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 06-09-2004, 08:26 AM   #1
zebiloute
LQ Newbie
 
Registered: Jul 2003
Posts: 3

Rep: Reputation: 0
Load SCSI module


Hi.

I try to use my Numerical camera with the pingoo (Slackware 9.1).

The problème is thre's no scsi_mod, sd_mod, and sg on my computer.

I download them and installed into the directory (/lib/... ...scsi/).

So when i try to load the module by

modprobe scsi_mod or modprobe /lib/... .../scsi/scsi_mod

i've the error Can't locate module scsi_mod



Thanx for your help
 
Old 06-09-2004, 09:16 AM   #2
Systematic
Member
 
Registered: May 2004
Location: Mechanicsburg, PA
Distribution: Mainly Slackware, but test run various different distros.
Posts: 77

Rep: Reputation: 15
when you installed slackware did you use the scsi.s kernel image or bare.i?

you could also upgrade to a 2.6.* kernel which has the scsi emulation built in..
 
Old 06-09-2004, 09:22 AM   #3
Vlad-A
Member
 
Registered: May 2004
Location: Vienna, Austria
Distribution: Open SuSE 11, Mac OS X 10.5
Posts: 299

Rep: Reputation: 33
Hi,

how did you attach your camera ? Via USB ?

Can you load the usb-storage module ?

modprobe usb-storage ?

Be aware that there are also certain camera types which do not appear as storage devices.

It also can be that the SCSI modules are compiled into the kernel and not as loadable modules.
 
Old 06-09-2004, 09:37 AM   #4
zebiloute
LQ Newbie
 
Registered: Jul 2003
Posts: 3

Original Poster
Rep: Reputation: 0
Thanx

Yes ive not select SCSI option because . When i've installed linux there was no SCSI device. So now i've an Kodak DX6490 plugin into the USB connector.

At start during boot linux display the following message :

Quote:
usb.c USB device (vend/prod 0x40f/0x9630) is not claimed by any active driver
Initializing USB Mass Storage driver...
usb.c : registered new driver usb-storage
scsi2 : SCSI emulation for USB Mass Storage devices

And i could not acces the /dev/sda1 When i try to mount it.
 
Old 06-09-2004, 09:41 AM   #5
Vlad-A
Member
 
Registered: May 2004
Location: Vienna, Austria
Distribution: Open SuSE 11, Mac OS X 10.5
Posts: 299

Rep: Reputation: 33
what is the output of lsmod ?

Is the camera recognized by lsusb ?
 
Old 04-15-2005, 03:03 AM   #6
gmitra
LQ Newbie
 
Registered: Jun 2002
Location: Slovak Republic
Distribution: RedHat, Mandrake, Gentoo
Posts: 25

Rep: Reputation: 15
dx6490 (renew)

Hi,
I have digital camera kodak dx6490. I tried to access the camera using storage mass
driver. Is there any possibility to mount this camera on my old kernel 2.4.18-14? Here
is the list of my (necessary I hope) modules loaded in kernel:
Code:
Module                  Size  Used by    Not tainted
vfat                   13276   0 (autoclean)
fat                    40056   0 (autoclean) [vfat]
sd_mod                 13584   0 (autoclean) (unused)
usb-storage            62488   0 (unused)
sr_mod                 18200   0 (autoclean)
scsi_mod              111336   3 [sd_mod usb-storage sr_mod ide-scsi]
usb-uhci               27308   0 (unused)
usbcore                80512   1 [usb-storage hid usb-uhci]
/sbin/lsusb gives:
Code:
> Bus 001 Device 008: ID 040a:0575 Kodak Co.
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 Interface
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         8
>   idVendor           0x040a Kodak Co.
>   idProduct          0x0575
>   bcdDevice            1.00
>   iManufacturer           1 Eastman Kodak Company
>   iProduct                2 KODAK EasyShare DX6490 Zoom Digital Camera
>   iSerial                 3 KCTCT44722796
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           39
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xc0
>       Self Powered
>     MaxPower                2mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass         6
>       bInterfaceSubClass      1
>       bInterfaceProtocol      1
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               none
>         wMaxPacketSize         64
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               none
>         wMaxPacketSize         64
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               none
>         wMaxPacketSize          8
>         bInterval              16
>   Language IDs: (length=4)
>      0409 English(US)
And a part of the corresponding output of cat /proc/bus/usb/devices
Code:
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  9 Spd=12  MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=040a ProdID=0575 Rev= 1.00
> S:  Manufacturer=Eastman Kodak Company
> S:  Product=KODAK EasyShare DX6490 Zoom Digital Camera
> S:  SerialNumber=KCTCT44722796
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=16ms
I read that kodak cameras communicate through PTP protocol. I installed gphoto2
but the gphoto2 -L gives
Code:
 *** Error ***
An error occurred in the io-library ('Could not claim the USB device'): Could not claim interface 0 (Operation not permitted). Make sure no other program or kernel module (e.g. dc2xx or stv680) is using the device and you have read/write access to the device.
*** Error (-53: 'Could not claim the USB device') **
Any suggestion what to try?
Thx
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
scsi raid module sopiaz57 Linux - General 0 11-18-2005 12:26 PM
SCSI module error AngryDwarf Linux - Hardware 1 10-05-2005 03:12 PM
scsi tape module F4ll0ut B0y Fedora 1 08-29-2005 04:07 PM
Module Auto-Load: module.conf tricks? m_e_perry Linux - Newbie 3 10-07-2004 05:45 PM
How to load 2 scsi drivers? Manuel-H Linux - Software 8 12-11-2003 03:06 AM


All times are GMT -5. The time now is 12:49 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration