lm_sensors lm85 problems
Hey people! I installed lm_sensors, and when I ran sensors-detect:
#----cut here---- # I2C adapter drivers modprobe i2c-i801 modprobe i2c-isa # I2C chip drivers # Warning: the required module lm85 is not currently installed on your system. # For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html # If driver is built-in to the kernel, or unavailable, comment out the following line. modprobe lm85 # Warning: the required module eeprom is not currently installed on your system. # For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html # If driver is built-in to the kernel, or unavailable, comment out the following line. modprobe eeprom # Warning: the required module smbus-arp is not currently installed on your system. # For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html # If driver is built-in to the kernel, or unavailable, comment out the following line. modprobe smbus-arp # no driver for Nat. Semi. PC87372 Super IO Fan Sensors yet # sleep 2 # optional /usr/local/bin/sensors -s # recommended #----cut here---- But I don't see any of these drivers on make menuconfig of my kernel -> on Device Drivers - Hardware Monitoring Support and Device Drivers - I2C support. I have already selected everything as modules but I only see, i.e. Device Drivers - LM75, LM83 and LM90. Nothing about LM85. The same happens with the other modules. Do I need to patch my Kernel or something??? Thanks! :) Btw: Kernel 2.6.17 |
Quote:
Code:
grep -i lm8 /boot/config-2.6.17-ck1 |
Ok, problem solved. I didn't enable:
Code maturity level options -> Prompt for development and/or incomplete code/drivers After enabling it, the options were there and now I can run perfectly lm_sensors ;) |
All times are GMT -5. The time now is 03:31 AM. |