LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 10-09-2004, 06:10 PM   #1
pjpeter
Member
 
Registered: Sep 2004
Distribution: Debian Sarge RC1 Kernel 2.6.7.1
Posts: 46

Rep: Reputation: 15
Limited to 60 FPS in Debian


Hi,

I had a problem recently with not being able to set my video above 60hz - now thats fine since its an LCD but I also can't get fps above 60 either. In fgl_glxgears and BZFlag thats the limit, and it causes my video driver (fglrx) to go crazy and eat up all the system resources it can (99.2% CPU).

My question is whether it's something to do with my XConfig-4 file or something, since 60hz is the max Refresh rate it won't let any program go above 60 fps either.

Of course it could be anything, I've tried different versions of the video card drivers to no avail, and even compiled a new kernel so I could do a oprofile on it so if anyone has any ideas or suggestions please tell me : ).

Thanks,
Peter
 
Old 10-09-2004, 06:30 PM   #2
LavaDevil94
LQ Guru
 
Registered: Jul 2003
Distribution: Gentoo 2004.2: Who needs exmmpkg when you have emerge?
Posts: 1,795

Rep: Reputation: 47
Is 60Hz the max on your monitor? If so, I recommend getting a new monitor, I strongly distrust LCD monitors at the moment...
If it's NOT the max, can you print your XF86Config-4/xorg.conf?
 
Old 10-09-2004, 06:38 PM   #3
pjpeter
Member
 
Registered: Sep 2004
Distribution: Debian Sarge RC1 Kernel 2.6.7.1
Posts: 46

Original Poster
Rep: Reputation: 15
Its a Laptop, the LCD is kind of attached and I'd like to use it : ).

In Windows XP I can set the Refresh Rate up to 200, though it claims its not actually supported. Other ppl have informed me that the refresh rate makes no difference to an LCD screen so I gave up on getting it above 60hz in Linux. I do know though that I can get fps higher than 60 in Windows even if its set to 60 hz (I usually get around 186fps in BZFlag, score 7900 in 3DMark2001SE). Anyway, ppl have been telling me that really the LCD doesn't refresh the screen but pixel by pixel as needed, therefore a refresh rate doesn't really make a difference, unless maybe Debian is detecting it wrong or something.

Here is the contents of my XFree86 file:

# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 91.1
VertRefresh 75 - 85
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "UseInternalAGPGART" "no"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "AUTO, NONE"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000800"
# === Video Overlay for the Xv extension ===
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

---

The only option I seem to ever have in the GNOME Debian Sarge GUI is to set it to 60hz refresh no matter what vid driver or XConfig-4 file says, though the screen res options do seem to change if I change them in there.

Thanks,
Peter

Oh and for the record the vid card is an ATI Radeon 9000M 64 mb DDR dedicated, the LCD is a 15" SXGA+ screen (native res 1400x1050) and the laptop is a ECS G732.

Last edited by pjpeter; 10-09-2004 at 06:44 PM.
 
Old 10-09-2004, 06:58 PM   #4
LavaDevil94
LQ Guru
 
Registered: Jul 2003
Distribution: Gentoo 2004.2: Who needs exmmpkg when you have emerge?
Posts: 1,795

Rep: Reputation: 47
Well, I'm a bit stumped. Your XF86Config is obviously set to have rates higher than 60Hz for VSync... Can you post your XFree log in /var/log?
 
Old 10-09-2004, 07:08 PM   #5
pjpeter
Member
 
Registered: Sep 2004
Distribution: Debian Sarge RC1 Kernel 2.6.7.1
Posts: 46

Original Poster
Rep: Reputation: 15
OK, I've managed to fix it so that I get up to 354 fps in BZFlag and 333 on fgl_glxgears by removing the 8 from my Capabilties hex code in the Device section. What that was doing was limiting my fps to the Virtical refresh rate of the monitor, which it thinks is 60. So thats fixed, but I still can only get 60hz on Screen Resolution options And more importantly my CPU goes balastic still whenever running either bzflag or fgl_glxgears - on top either app when open quickly rises to take up 99.2% of the CPU power.

Any ideas?

Thanks,
Peter

Here is my XFree log file:


This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529113443 root@cyberhq.internal.cyberhqz.com)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.6-rc3-bk9 i686 [ELF]
Build Date: 29 May 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.8-101004 (root@CPE0050eb371cb8-CM014110202640) (gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)) #1 Sat Oct 9 17:33:33 EDT 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Oct 9 20:00:25 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80002008, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0646 card 0000,0000 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 14 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:3: chip 1039,7007 card 1039,1394 rev 00 class 0c,00,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:6: chip 1039,7013 card 1019,b732 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1019,b732 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1039,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1019,b732 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1019,b732 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1524,1410 card 4000,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: 01:00:0: chip 1002,4c66 card 1019,b732 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8100000 - 0xe81fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x20800000 - 0x20bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20400000 - 0x207fffff (0x400000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] rev 1, Mem @ 0xf0000000/27, 0xe8100000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[B]
[1] -1 0 0xe8004000 - 0xe8004fff (0x1000) MX[B]
[2] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[3] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[4] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[5] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[8] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[10] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[11] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[12] -1 0 0x00001c00 - 0x00001c7f (0x80) IX[B]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[14] -1 0 0x00002000 - 0x0000200f (0x10) IX[B]
[15] -1 0 0x00008100 - 0x0000811f (0x20) IX[B]
[16] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[B]
[1] -1 0 0xe8004000 - 0xe8004fff (0x1000) MX[B]
[2] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[3] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[4] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[5] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[8] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[10] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[11] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[12] -1 0 0x00001c00 - 0x00001c7f (0x80) IX[B]
[13] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[14] -1 0 0x00002000 - 0x0000200f (0x10) IX[B]
[15] -1 0 0x00008100 - 0x0000811f (0x20) IX[B]
[16] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[B]
[6] -1 0 0xe8004000 - 0xe8004fff (0x1000) MX[B]
[7] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[8] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[9] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[10] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[17] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[19] -1 0 0x00001c00 - 0x00001c7f (0x80) IX[B]
[20] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[21] -1 0 0x00002000 - 0x0000200f (0x10) IX[B]
[22] -1 0 0x00008100 - 0x0000811f (0x20) IX[B]
[23] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.14.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
ATI RV350 AS (Fire GL T2), ATI RV350 AT (Fire GL T2),
ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2),
ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800),
ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10), ATI RV370 5B60,
ATI RV370 5B61, ATI RV370 5B62, ATI RV370 5B63, ATI RV370 5B64,
ATI RV370 5B66, ATI RV370 5B67, ATI RV370 5B70, ATI RV370 5B71,
ATI RV370 5B72, ATI RV370 5B73, ATI RV370 5460, ATI RV370 5461,
ATI RV370 5462, ATI RV370 5463, ATI RV370 5464, ATI RV370 5465,
ATI RV370 5466, ATI RV370 5467, ATI RV370 5470, ATI RV370 5471,
ATI RV370 5472, ATI RV370 5473, ATI RV380 AP, ATI RV380 AQ,
ATI RV380 AR, ATI RV380 AS, ATI RV380 AT, ATI RV380 AU, ATI RV380 AV,
ATI RV380 AW, ATI RV380 AP2, ATI RV380 AQ2, ATI RV380 AR2,
ATI RV380 AS2, ATI RV380 NP, ATI RV380 NQ, ATI RV380 NR,
ATI RV380 NS, ATI RV380 NT, ATI RV380 NU, ATI RV380 NV, ATI RV380 NW,
ATI RV380 NP2, ATI RV380 NQ2, ATI RV380 NR2, ATI RV380 NS2,
ATI R420 JH, ATI R420 JI, ATI R420 JJ, ATI R420 JK, ATI R420 JL,
ATI R420 JM, ATI R420 JN, ATI R420 JP, ATI R423 UH, ATI R423 UI,
ATI R423 UJ, ATI R423 UK, ATI R423 UL, ATI R423 UM, ATI R423 ]W,
ATI R423 UP, ATI R423 UQ, ATI R423 UR, ATI R423 UT, ATI R423 ]H,
ATI R423 ]I, ATI RV410 VJ, ATI RV410 VK, ATI RV410 VL, ATI RV410 VM,
ATI RV410 ^H, ATI RV410 ^I, ATI RV410 ^J, ATI RV410 ^K, ATI RV410 ^L,
ATI RV410 ^M, ATI RV410 ^O, ATI RV410 VR, ATI RV410 VS, ATI RV410 ^R,
ATI RV410 ^S, ATI RV410 ^U, ATI RS300 IGP, ATI RS350 IGP,
ATI RS300M IGP
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI RV250 Lf (M9) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[B]
[6] -1 0 0xe8004000 - 0xe8004fff (0x1000) MX[B]
[7] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[8] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[9] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[10] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[17] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[19] -1 0 0x00001c00 - 0x00001c7f (0x80) IX[B]
[20] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[21] -1 0 0x00002000 - 0x0000200f (0x10) IX[B]
[22] -1 0 0x00008100 - 0x0000811f (0x20) IX[B]
[23] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8209748


Last edited by pjpeter; 10-09-2004 at 07:09 PM.
 
Old 10-09-2004, 07:10 PM   #6
pjpeter
Member
 
Registered: Sep 2004
Distribution: Debian Sarge RC1 Kernel 2.6.7.1
Posts: 46

Original Poster
Rep: Reputation: 15
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[B]
[6] -1 0 0xe8004000 - 0xe8004fff (0x1000) MX[B]
[7] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[8] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[9] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[10] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[12] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[20] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[21] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[22] -1 0 0x00001c00 - 0x00001c7f (0x80) IX[B]
[23] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[24] -1 0 0x00002000 - 0x0000200f (0x10) IX[B]
[25] -1 0 0x00008100 - 0x0000811f (0x20) IX[B]
[26] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "KernelModuleParm" "agplock=0"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000100"
(**) fglrx(0): Option "MonitorLayout" "AUTO, NONE"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "no"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "ATI RV250 Lf (M9)" (Chipset = 0x4c66)
(--) fglrx(0): (PciSubVendor = 0x1019, PciSubDevice = 0xb732)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xe8100000
(--) fglrx(0): ChipExtRevID = 0x01
(--) fglrx(0): ChipIntRevID = 0x00
(--) fglrx(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type NONE

(II) fglrx(0): Primary head:
Monitor -- LVDS
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) fglrx(0): Secondary head:
Monitor -- NONE
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(WW) fglrx(0): Only single display is connected, DesktopOption will be ignored
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: Samsung LTN150P1-L02
(II) fglrx(0): Panel Size from BIOS: 1400x1050
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1280x1024
(II) fglrx(0): Valid mode using on-chip RMX: 1280x960
(II) fglrx(0): Valid mode using on-chip RMX: 1024x768
(II) fglrx(0): Valid mode using on-chip RMX: 800x600
(II) fglrx(0): Valid mode using on-chip RMX: 640x480
(II) fglrx(0): Total 5 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 34208 34320 1688 1024 1050 1053 1063
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) fglrx(0): Modeline "1280x960" 108.00 1280 34208 34320 1688 960 1050 1053 1063
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) fglrx(0): Modeline "1024x768" 108.00 1024 34208 34320 1688 768 1050 1053 1063
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) fglrx(0): Modeline "800x600" 108.00 800 34208 34320 1688 600 1050 1053 1063
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.2 Hz
(II) fglrx(0): Modeline "640x480" 108.00 640 34208 34320 1688 480 1050 1053 1063
(==) fglrx(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.3.0.1, module version = 3.14.1
ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000a5f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): KernelModuleParm: "agplock=0"
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8100000 - 0xe810ffff (0x10000) MX[B]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe8005000 - 0xe8005fff (0x1000) MX[B]
[8] -1 0 0xe8004000 - 0xe8004fff (0x1000) MX[B]
[9] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
[10] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
[11] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
[12] -1 0 0xe8000000 - 0xe8000fff (0x1000) MX[B]
[13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[14] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] 0 0 0x00009000 - 0x000090ff (0x100) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[23] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[24] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[25] -1 0 0x00001c00 - 0x00001c7f (0x80) IX[B]
[26] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[27] -1 0 0x00002000 - 0x0000200f (0x10) IX[B]
[28] -1 0 0x00008100 - 0x0000811f (0x20) IX[B]
[29] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xf0701000 (size=0x038ff000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe09b1000
(II) fglrx(0): [drm] mapped SAREA 0xe09b1000 to 0x40244000
(II) fglrx(0): [drm] framebuffer handle = 0xf0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 3.14.1
(II) fglrx(0): Date: Sep 27 2004
(II) fglrx(0): Desc: ATI Fire GL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.8-101004
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xe8100000
(II) fglrx(0): [agp] Mode=0x1f000207 bridge: 0x1039/0x0646
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000304
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000304)
(II) fglrx(0): [agp] grafics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe4bbc000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf0000000 FBMappedSize: 0x00701000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1434)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
AUDIT: Sat Oct 9 20:00:50 2004: 2725 X: client 5 rejected from local host
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
SwitchToMode - scrn: 0 clock: 108000
hdsp: 800 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 600 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
Checking against clock: 108000 (108000)
hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 1024 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
Checking against clock: 108000 (108000)
hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
Checking against clock: 108000 (108000)
hdsp: 1024 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 768 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
Checking against clock: 108000 (108000)
hdsp: 800 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 600 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 800 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 600 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
SwitchToMode - scrn: 0 clock: 108000
hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
Checking against clock: 108000 (108000)
hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 1024 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
Checking against clock: 108000 (108000)
hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
SwitchToMode - Succeeded
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1280 hbeg: 34208 hend: 34320 httl: 1688
vdsp: 960 vbeg: 1050 vend: 1053 vttl: 1063 flags: -2147483648
 
Old 10-09-2004, 08:38 PM   #7
LavaDevil94
LQ Guru
 
Registered: Jul 2003
Distribution: Gentoo 2004.2: Who needs exmmpkg when you have emerge?
Posts: 1,795

Rep: Reputation: 47
Well, your log file doesn't seem to show anything wrong. It all seems fine to me now that your FPS has gone up. As for the CPU usage, when I run glxgears on my system (no ATI on mine, what FPS do you get with glxgears?), it's around 4700FPS but the CPU usage is around 99%, so I don't see any problems.
 
Old 10-09-2004, 09:54 PM   #8
pjpeter
Member
 
Registered: Sep 2004
Distribution: Debian Sarge RC1 Kernel 2.6.7.1
Posts: 46

Original Poster
Rep: Reputation: 15
My score is 147 FPS on glxgears - mostly its BZFlag thats getting me, it goes up to 99% CPU usage as well and its not supposed to be trying the limits of my card. BZFlag definately should not go to 99% CPU

- Turns out I was using the radeon drivers on that boot, so I rebooted to the fglrx and I get "glxgears
8066 frames in 5.0 seconds = 1613.200 FPS" - BZFlag is still mucked though, and I know its not the game but something to do with the system and the vid card or something


Peter

Last edited by pjpeter; 10-09-2004 at 10:25 PM.
 
Old 10-24-2004, 06:37 AM   #9
Nightfrost
Member
 
Registered: Jun 2004
Location: Sweden
Distribution: ArchLinux
Posts: 201

Rep: Reputation: 30
Hi,

I have the exact same problem with the refresh rate. Xfree runs at 60 Hz although my monitor (not LCD) works best at 75 Hz. XF86Config-4 has the vertical set to 56-75.

(I'm also running Kanotix which autodetects everything and get a refresh rate of 75 Hz no prob. And I know I might be able to copy the config file over; but I wanted to install and configure a debian system myself).

Thanks.
 
Old 10-26-2004, 11:23 AM   #10
Nightfrost
Member
 
Registered: Jun 2004
Location: Sweden
Distribution: ArchLinux
Posts: 201

Rep: Reputation: 30
humbly *bumbing* this thread
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
debian - nvidia very low fps fieska Linux - Hardware 2 06-13-2005 05:30 AM
1 FPS only! Superganja23 Linux - Newbie 7 09-20-2004 08:30 PM
Slooow FPS (one fps) with WineX and THPS3 forrest44 Linux - Games 5 06-10-2004 09:12 AM
Getting Cube above 9 FPS on Debian. What drivers do I need? shodekiagari Linux - Games 1 02-21-2004 06:02 AM
FPS Limited :( archish Linux - Software 3 04-29-2003 01:21 PM


All times are GMT -5. The time now is 11:25 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration