LinuxQuestions.org
View the Most Wanted LQ Wiki articles.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices



Reply
 
Search this Thread
Old 02-05-2010, 10:42 AM   #1
ramly
LQ Newbie
 
Registered: Nov 2007
Posts: 13

Rep: Reputation: 0
Red face instal hp laserjet 1020 printer in pclinuxos


How install hp laserjet 1020 printer in pclinuxos GNOME 2010 ?

Tried installing this printer via localhost:631 but failed -

Tried printerdrake but of no use

Then tried by the instructions in site rkkda

also tried hp-setup

None of these worked

any help please ?

Thanks in advance
OpenPrinting database - Printer: HP LaserJet 1020
 
Old 02-05-2010, 11:14 AM   #2
AwesomeMachine
Senior Member
 
Registered: Jan 2005
Location: USA and Italy
Distribution: Debian jessie/sid; OpenSuSE; Fedora
Posts: 1,593

Rep: Reputation: 162Reputation: 162
Try this link:

http://www.linuxprinting.org/show_dr...-laserjet_1020
 
Old 02-05-2010, 12:58 PM   #3
pixellany
LQ Veteran
 
Registered: Nov 2005
Location: Annapolis, MD
Distribution: Arch/XFCE
Posts: 17,802

Rep: Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729
Please avoid duplicate posts (this one maybe was an accident)

Do you have HPLIP installed?

When installing using the web interface (localhost:631), is the printer detected?

Note that not all of the drivers offered will work with certain models. Are there multiple options for drivers?
 
Old 02-05-2010, 01:03 PM   #4
camorri
Senior Member
 
Registered: Nov 2002
Location: Somewhere inside 9.9 million sq. km. Canada
Distribution: Slackware 14.1
Posts: 4,873

Rep: Reputation: 434Reputation: 434Reputation: 434Reputation: 434Reputation: 434
These are the instructions, and driver needed, from Linuxprinting.org.

Quote:
Edited Notes

This printer is supported by the foo2zjs free software printer driver.

The printer is faster than the LaserJet 1000 and has a USB connection. It has only 2 MB of RAM and 32 kB of ROM.

The firmware of the printer must be uploaded after turning it on. You can use a hotplug/udev script which comes with foo2zjs, or do it manually: "cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/usb/lp0".

Consumables/Refills: Print cartridge (2000 prints) - $65 Part numbers: Q2612A
Did you upload the firmware as indicated?
 
Old 02-05-2010, 01:31 PM   #5
pixellany
LQ Veteran
 
Registered: Nov 2005
Location: Annapolis, MD
Distribution: Arch/XFCE
Posts: 17,802

Rep: Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729
I'm puzzled about the firmware. Never had to do that for my HP 1022. And--there is nothing in the Arch repos that looks like HP firmware.

I wonder if the firmware is part of HPLIP?

My system has the "foo2zjs" driver, but no sign of the above-named firmware. I have a hunch that the Linuxprinting info could be out of date.
 
Old 02-05-2010, 04:32 PM   #6
camorri
Senior Member
 
Registered: Nov 2002
Location: Somewhere inside 9.9 million sq. km. Canada
Distribution: Slackware 14.1
Posts: 4,873

Rep: Reputation: 434Reputation: 434Reputation: 434Reputation: 434Reputation: 434
It should be part of the foo2zjs package. If it is up to date, then the path shown here -

Quote:
"cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/usb/lp0".
should have the file sihp1020.dl

if not, then see if there is an update.
 
Old 02-05-2010, 07:00 PM   #7
ramly
LQ Newbie
 
Registered: Nov 2007
Posts: 13

Original Poster
Rep: Reputation: 0
Dear Pixallani,

It seems that the firmware is not sent to the printer - what to do ? Instalaltion of HPLIP failed due to want of some dependencies.



Dear Camorri,
The following command gave the output 'Nosuch file or directory'
cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/usb/lp0
 
Old 02-05-2010, 07:06 PM   #8
pixellany
LQ Veteran
 
Registered: Nov 2005
Location: Annapolis, MD
Distribution: Arch/XFCE
Posts: 17,802

Rep: Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729
If you install HPLIP (or anything) using the package manager, the dependencies should be taken care of automatically. Tell exactly what you did and what is missing. Assuming you are using the package manager, have you synced up (refreshed) the repositories?

Camorri;
There's no directory on this system like what you show---I'm going to check at home (where the HP 1022 is.)
 
Old 02-05-2010, 07:21 PM   #9
ramly
LQ Newbie
 
Registered: Nov 2007
Posts: 13

Original Poster
Rep: Reputation: 0
Dear Pixellany,

Now I tried to install the printer as directed in HPLIP. followd the instructions strictly.


The command and the output is given below :

./configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-qt4 --enable-doc-build --enable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-policykit --disable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build
:

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking build system type... i686-pc-linux-gnu

checking host system type... i686-pc-linux-gnu

checking for style of include used by make... GNU

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking dependency style of gcc... gcc3

checking for a sed that does not truncate output... /bin/sed

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for /usr/bin/ld option to reload object files... -r

checking for BSD-compatible nm... /usr/bin/nm -B

checking whether ln -s works... yes

checking how to recognize dependent libraries... pass_all

checking how to run the C preprocessor... /lib/cpp

configure: error: in `/home/ramesh/hplip-3.9.12':

configure: error: C preprocessor "/lib/cpp" fails sanity check

See `config.log' for more details.

[ramesh@localhost hplip-3.9.12]$


make command gives the following out put :

make: *** No targets specified and no makefile found. Stop.


Wha tis the mistake ?
 
Old 02-05-2010, 07:43 PM   #10
camorri
Senior Member
 
Registered: Nov 2002
Location: Somewhere inside 9.9 million sq. km. Canada
Distribution: Slackware 14.1
Posts: 4,873

Rep: Reputation: 434Reputation: 434Reputation: 434Reputation: 434Reputation: 434
I'm not sure why you are trying to compile the hplip driver. This is not listed as supporting your printer.

From what you said earlier
Quote:
My system has the "foo2zjs" driver, but no sign of the above-named firmware
If you have this driver, you should have the fireware, somewhere. It all depends where it was installed.

Try to find it using the locate command. Open a konsole, and get root privileges. Run the command ( as root ) 'updatedb'. The first time it runs will take some time. You are building a database of all files on the system. Once that completes, run the command 'locate sihp1020.dl' If you have the file, the path to the file will list on the konsole. If there is no output, then you do not have the file. You can try to locate the directory foo2zjs also, that will show up if you have that driver installed.

The hplip driver should be available from the repos for PCLinux.
 
Old 02-05-2010, 08:08 PM   #11
ramly
LQ Newbie
 
Registered: Nov 2007
Posts: 13

Original Poster
Rep: Reputation: 0
hi,

I tried the first two commands as you said, but no output

the command locate foo2zjs gave the following output

/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_M1319_MFP.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P1005.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P1006.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P1007.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P1008.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P1505.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P2014.xml
/home/ramesh/foo2zjs/foomatic-db/printer/HP-LaserJet_P2035.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_1600W.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_1680MF.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_1690MF.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_2480_MF.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_2490_MF.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_2530_DL.xml
/home/ramesh/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_4690MF.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Kyocera-KM-1635.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Kyocera-KM-2035.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Lexmark-C500.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Minolta-Color_PageWorks_Pro_L.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Minolta-magicolor_2200_DL.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Minolta-magicolor_2300_DL.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Minolta-magicolor_2430_DL.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C3100.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C3200.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C3300.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C3400.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C3530_MFP.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C5100.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C5200.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C5500.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C5600.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Oki-C5800.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLP-300.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLP-310.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLP-315.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLP-600.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLP-610.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLX-2160.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLX-3160.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Samsung-CLX-3175.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Xerox-Phaser_6110.xml
/home/ramesh/foo2zjs/foomatic-db/printer/Xerox-Phaser_6115MFP.xml
/home/ramesh/foo2zjs/icc2ps/AUTHORS
/home/ramesh/foo2zjs/icc2ps/COPYING
/home/ramesh/foo2zjs/icc2ps/Makefile
/home/ramesh/foo2zjs/icc2ps/README
/home/ramesh/foo2zjs/icc2ps/README.foo2zjs
/home/ramesh/foo2zjs/icc2ps/cmscam02.c
/home/ramesh/foo2zjs/icc2ps/cmscam97.c
/home/ramesh/foo2zjs/icc2ps/cmscgats.c
/home/ramesh/foo2zjs/icc2ps/cmscnvrt.c
/home/ramesh/foo2zjs/icc2ps/cmserr.c
/home/ramesh/foo2zjs/icc2ps/cmsgamma.c
/home/ramesh/foo2zjs/icc2ps/cmsgmt.c
/home/ramesh/foo2zjs/icc2ps/cmsintrp.c
/home/ramesh/foo2zjs/icc2ps/cmsio0.c
/home/ramesh/foo2zjs/icc2ps/cmsio1.c
/home/ramesh/foo2zjs/icc2ps/cmslut.c
/home/ramesh/foo2zjs/icc2ps/cmsmatsh.c
/home/ramesh/foo2zjs/icc2ps/cmsmtrx.c
/home/ramesh/foo2zjs/icc2ps/cmsnamed.c
/home/ramesh/foo2zjs/icc2ps/cmspack.c
/home/ramesh/foo2zjs/icc2ps/cmspcs.c
/home/ramesh/foo2zjs/icc2ps/cmsps2.c
/home/ramesh/foo2zjs/icc2ps/cmssamp.c
/home/ramesh/foo2zjs/icc2ps/cmsvirt.c
/home/ramesh/foo2zjs/icc2ps/cmswtpnt.c
/home/ramesh/foo2zjs/icc2ps/cmsxform.c
/home/ramesh/foo2zjs/icc2ps/icc2ps.c
/home/ramesh/foo2zjs/icc2ps/icc34.h
/home/ramesh/foo2zjs/icc2ps/lcms.h
/home/ramesh/foo2zjs/icc2ps/xgetopt.c
/root/foo2zjs
/root/foo2zjs.tar.gz
/root/foo2zjs/COPYING
/root/foo2zjs/ChangeLog
/root/foo2zjs/INSTALL
/root/foo2zjs/INSTALL.in
/root/foo2zjs/INSTALL.osx
/root/foo2zjs/INSTALL.usb
/root/foo2zjs/Makefile
/root/foo2zjs/PPD
/root/foo2zjs/README
/root/foo2zjs/README.in
/root/foo2zjs/align.ps
/root/foo2zjs/arm2hpdl.1in
/root/foo2zjs/arm2hpdl.c
/root/foo2zjs/c5200mono.prn
/root/foo2zjs/crd
/root/foo2zjs/cups.h
/root/foo2zjs/foo2hiperc-wrapper.1in
/root/foo2zjs/foo2hiperc-wrapper.in
/root/foo2zjs/foo2hiperc.1in
/root/foo2zjs/foo2hiperc.c
/root/foo2zjs/foo2hp.1in
/root/foo2zjs/foo2hp.c
/root/foo2zjs/foo2hp2600-wrapper.1in
/root/foo2zjs/foo2hp2600-wrapper.in
/root/foo2zjs/foo2lava-wrapper.1in
/root/foo2zjs/foo2lava-wrapper.in
/root/foo2zjs/foo2lava.1in
/root/foo2zjs/foo2lava.c
/root/foo2zjs/foo2oak-wrapper.1in
/root/foo2zjs/foo2oak-wrapper.in
/root/foo2zjs/foo2oak.1in
/root/foo2zjs/foo2oak.c
/root/foo2zjs/foo2qpdl-wrapper.1in
/root/foo2zjs/foo2qpdl-wrapper.in
/root/foo2zjs/foo2qpdl.1in
/root/foo2zjs/foo2qpdl.c
/root/foo2zjs/foo2slx-wrapper.1in
/root/foo2zjs/foo2slx-wrapper.in
/root/foo2zjs/foo2slx.1in
/root/foo2zjs/foo2slx.c
/root/foo2zjs/foo2xqx-wrapper.1in
/root/foo2zjs/foo2xqx-wrapper.in
/root/foo2zjs/foo2xqx.1in
/root/foo2zjs/foo2xqx.c
/root/foo2zjs/foo2zjs
/root/foo2zjs/foo2zjs-pstops.1in
/root/foo2zjs/foo2zjs-pstops.sh
/root/foo2zjs/foo2zjs-wrapper.1in
/root/foo2zjs/foo2zjs-wrapper.in
/root/foo2zjs/foo2zjs.1in
/root/foo2zjs/foo2zjs.c
/root/foo2zjs/foo2zjs.o
/root/foo2zjs/foomatic-db
/root/foo2zjs/foomatic-test
/root/foo2zjs/gamma-lookup.ps
/root/foo2zjs/gamma.ps
/root/foo2zjs/getweb.in
/root/foo2zjs/gipddecode.c
/root/foo2zjs/hiperc.h
/root/foo2zjs/hipercdecode.1in
/root/foo2zjs/hipercdecode.c
/root/foo2zjs/hplj1000
/root/foo2zjs/hplj1020.desktop
/root/foo2zjs/hplj1020_icon.gif
/root/foo2zjs/hplj1020_icon.png
/root/foo2zjs/hplj10xx.rules
/root/foo2zjs/hplj10xx_gui.tcl
/root/foo2zjs/icc2ps
/root/foo2zjs/includer-man
/root/foo2zjs/jbig.c
/root/foo2zjs/jbig.h
/root/foo2zjs/jbig.o
/root/foo2zjs/jbig_ar.c
/root/foo2zjs/jbig_ar.h
/root/foo2zjs/jbig_ar.o
/root/foo2zjs/lavadecode.1in
/root/foo2zjs/lavadecode.c
/root/foo2zjs/macros.man
/root/foo2zjs/msexpand
/root/foo2zjs/oak.h
/root/foo2zjs/oakdecode.1in
/root/foo2zjs/oakdecode.c
/root/foo2zjs/opldecode.1in
/root/foo2zjs/opldecode.c
/root/foo2zjs/ppd-adjust
/root/foo2zjs/printer-profile.1in
/root/foo2zjs/printer-profile.sh
/root/foo2zjs/qpdl.h
/root/foo2zjs/qpdldecode.1in
/root/foo2zjs/qpdldecode.c
/root/foo2zjs/regress.txt
/root/foo2zjs/slx.h
/root/foo2zjs/slxdecode.1in
/root/foo2zjs/slxdecode.c
/root/foo2zjs/testpage.ps
/root/foo2zjs/usb_printerid.1in
/root/foo2zjs/usb_printerid.c
/root/foo2zjs/xqx.h
/root/foo2zjs/xqxdecode.1in
/root/foo2zjs/xqxdecode.c
/root/foo2zjs/zjs.h
/root/foo2zjs/zjsdecode.1in
/root/foo2zjs/zjsdecode.c
/root/foo2zjs/PPD/Generic-OAKT_Printer.ppd
/root/foo2zjs/PPD/Generic-ZjStream_Printer.ppd
/root/foo2zjs/PPD/HP-Color_LaserJet_1500.ppd
/root/foo2zjs/PPD/HP-Color_LaserJet_1600.ppd
/root/foo2zjs/PPD/HP-Color_LaserJet_2600n.ppd
/root/foo2zjs/PPD/HP-Color_LaserJet_CP1215.ppd
/root/foo2zjs/PPD/HP-LaserJet_1000.ppd
/root/foo2zjs/PPD/HP-LaserJet_1005.ppd
/root/foo2zjs/PPD/HP-LaserJet_1018.ppd
/root/foo2zjs/PPD/HP-LaserJet_1020.ppd
/root/foo2zjs/PPD/HP-LaserJet_1022.ppd
/root/foo2zjs/PPD/HP-LaserJet_M1005_MFP.ppd
/root/foo2zjs/PPD/HP-LaserJet_M1120_MFP.ppd
/root/foo2zjs/PPD/HP-LaserJet_M1319_MFP.ppd
/root/foo2zjs/PPD/HP-LaserJet_P1005.ppd
/root/foo2zjs/PPD/HP-LaserJet_P1006.ppd
/root/foo2zjs/PPD/HP-LaserJet_P1007.ppd
/root/foo2zjs/PPD/HP-LaserJet_P1008.ppd
/root/foo2zjs/PPD/HP-LaserJet_P1505.ppd
/root/foo2zjs/PPD/HP-LaserJet_P2014.ppd
/root/foo2zjs/PPD/HP-LaserJet_P2035.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_1600W.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_1680MF.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_1690MF.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_2480_MF.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_2490_MF.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_2530_DL.ppd
/root/foo2zjs/PPD/KONICA_MINOLTA-magicolor_4690MF.ppd
/root/foo2zjs/PPD/Kyocera-KM-1635.ppd
/root/foo2zjs/PPD/Kyocera-KM-2035.ppd
/root/foo2zjs/PPD/Lexmark-C500.ppd
/root/foo2zjs/PPD/Minolta-Color_PageWorks_Pro_L.ppd
/root/foo2zjs/PPD/Minolta-magicolor_2200_DL.ppd
/root/foo2zjs/PPD/Minolta-magicolor_2300_DL.ppd
/root/foo2zjs/PPD/Minolta-magicolor_2430_DL.ppd
/root/foo2zjs/PPD/Oki-C3100.ppd
/root/foo2zjs/PPD/Oki-C3200.ppd
/root/foo2zjs/PPD/Oki-C3300.ppd
/root/foo2zjs/PPD/Oki-C3400.ppd
/root/foo2zjs/PPD/Oki-C3530_MFP.ppd
/root/foo2zjs/PPD/Oki-C5100.ppd
/root/foo2zjs/PPD/Oki-C5200.ppd
/root/foo2zjs/PPD/Oki-C5500.ppd
/root/foo2zjs/PPD/Oki-C5600.ppd
/root/foo2zjs/PPD/Oki-C5800.ppd
/root/foo2zjs/PPD/Samsung-CLP-300.ppd
/root/foo2zjs/PPD/Samsung-CLP-310.ppd
/root/foo2zjs/PPD/Samsung-CLP-315.ppd
/root/foo2zjs/PPD/Samsung-CLP-600.ppd
/root/foo2zjs/PPD/Samsung-CLP-610.ppd
/root/foo2zjs/PPD/Samsung-CLX-2160.ppd
/root/foo2zjs/PPD/Samsung-CLX-3160.ppd
/root/foo2zjs/PPD/Samsung-CLX-3175.ppd
/root/foo2zjs/PPD/Xerox-Phaser_6110.ppd
/root/foo2zjs/PPD/Xerox-Phaser_6115MFP.ppd
/root/foo2zjs/crd/qpdl
/root/foo2zjs/crd/zjs
/root/foo2zjs/crd/qpdl/CLP-300-1200x1200cms2
/root/foo2zjs/crd/qpdl/CLP-300-1200x600cms2
/root/foo2zjs/crd/qpdl/CLP-300-600x600cms2
/root/foo2zjs/crd/qpdl/CLP-300cms
/root/foo2zjs/crd/qpdl/CLP-600-1200x1200cms2
/root/foo2zjs/crd/qpdl/CLP-600-1200x600cms2
/root/foo2zjs/crd/qpdl/CLP-600-600x600cms2
/root/foo2zjs/crd/qpdl/CLP-600cms
/root/foo2zjs/crd/qpdl/black-text.ps
/root/foo2zjs/crd/zjs/2300w-1200@150-l250-kx,ucr100,0-per.crd
/root/foo2zjs/crd/zjs/2300w-1200@150-l250-kx,ucr100,50-per.crd
/root/foo2zjs/crd/zjs/2300w-1200@150-l250-kx,ucr100,75-per.crd
/root/foo2zjs/crd/zjs/2300w-1200@150-l250-kx,ucr125,75-per.crd
/root/foo2zjs/crd/zjs/kh.crd
/root/foo2zjs/crd/zjs/kx.crd
/root/foo2zjs/crd/zjs/prolog.ps
/root/foo2zjs/crd/zjs/screen1200.ps
/root/foo2zjs/crd/zjs/screen2400.ps
/root/foo2zjs/foomatic-db/driver
/root/foo2zjs/foomatic-db/opt
/root/foo2zjs/foomatic-db/printer
/root/foo2zjs/foomatic-db/driver/foo2hiperc.xml
/root/foo2zjs/foomatic-db/driver/foo2hp.xml
/root/foo2zjs/foomatic-db/driver/foo2lava.xml
/root/foo2zjs/foomatic-db/driver/foo2oak-z1.xml
/root/foo2zjs/foomatic-db/driver/foo2oak.xml
/root/foo2zjs/foomatic-db/driver/foo2qpdl.xml
/root/foo2zjs/foomatic-db/driver/foo2slx.xml
/root/foo2zjs/foomatic-db/driver/foo2xqx.xml
/root/foo2zjs/foomatic-db/driver/foo2zjs.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-Compression.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-PageSize.xml
/root/foo2zjs/foomatic-db/opt/foo2hiperc-Resolution.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-AlignCMYK.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-BitsPerPlane.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2hp-PrinterType.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-PageSize.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-PrinterType.xml
/root/foo2zjs/foomatic-db/opt/foo2lava-Resolution.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-BitsPerPlane.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-z1-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-z1-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-z1-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2oak-z1-PageSize.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-PageSize.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-PrinterType.xml
/root/foo2zjs/foomatic-db/opt/foo2qpdl-Resolution.xml
/root/foo2zjs/foomatic-db/opt/foo2slx-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2slx-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2slx-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2slx-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2slx-PageSize.xml
/root/foo2zjs/foomatic-db/opt/foo2slx-Resolution.xml
/root/foo2zjs/foomatic-db/opt/foo2xqx-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2xqx-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2xqx-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2xqx-Resolution.xml
/root/foo2zjs/foomatic-db/opt/foo2xxx-Copies.xml
/root/foo2zjs/foomatic-db/opt/foo2xxx-Nup.xml
/root/foo2zjs/foomatic-db/opt/foo2xxx-NupOrient.xml
/root/foo2zjs/foomatic-db/opt/foo2xxx-Quality.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-ColorMode.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-Duplex.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-ICM.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-InputSlot.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-Intent.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-MediaType.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-PageSize.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-PrinterType.xml
/root/foo2zjs/foomatic-db/opt/foo2zjs-Resolution.xml
/root/foo2zjs/foomatic-db/printer/Generic-OAKT_Printer.xml
/root/foo2zjs/foomatic-db/printer/Generic-ZjStream_Printer.xml
/root/foo2zjs/foomatic-db/printer/HP-Color_LaserJet_1500.xml
/root/foo2zjs/foomatic-db/printer/HP-Color_LaserJet_1600.xml
/root/foo2zjs/foomatic-db/printer/HP-Color_LaserJet_2600n.xml
/root/foo2zjs/foomatic-db/printer/HP-Color_LaserJet_CP1215.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_1000.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_1005.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_1018.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_1020.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_1022.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_M1005_MFP.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_M1120_MFP.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_M1319_MFP.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P1005.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P1006.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P1007.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P1008.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P1505.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P2014.xml
/root/foo2zjs/foomatic-db/printer/HP-LaserJet_P2035.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_1600W.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_1680MF.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_1690MF.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_2480_MF.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_2490_MF.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_2530_DL.xml
/root/foo2zjs/foomatic-db/printer/KONICA_MINOLTA-magicolor_4690MF.xml
/root/foo2zjs/foomatic-db/printer/Kyocera-KM-1635.xml
/root/foo2zjs/foomatic-db/printer/Kyocera-KM-2035.xml
/root/foo2zjs/foomatic-db/printer/Lexmark-C500.xml
/root/foo2zjs/foomatic-db/printer/Minolta-Color_PageWorks_Pro_L.xml
/root/foo2zjs/foomatic-db/printer/Minolta-magicolor_2200_DL.xml
/root/foo2zjs/foomatic-db/printer/Minolta-magicolor_2300_DL.xml
/root/foo2zjs/foomatic-db/printer/Minolta-magicolor_2430_DL.xml
/root/foo2zjs/foomatic-db/printer/Oki-C3100.xml
/root/foo2zjs/foomatic-db/printer/Oki-C3200.xml
/root/foo2zjs/foomatic-db/printer/Oki-C3300.xml
/root/foo2zjs/foomatic-db/printer/Oki-C3400.xml
/root/foo2zjs/foomatic-db/printer/Oki-C3530_MFP.xml
/root/foo2zjs/foomatic-db/printer/Oki-C5100.xml
/root/foo2zjs/foomatic-db/printer/Oki-C5200.xml
/root/foo2zjs/foomatic-db/printer/Oki-C5500.xml
/root/foo2zjs/foomatic-db/printer/Oki-C5600.xml
/root/foo2zjs/foomatic-db/printer/Oki-C5800.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLP-300.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLP-310.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLP-315.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLP-600.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLP-610.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLX-2160.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLX-3160.xml
/root/foo2zjs/foomatic-db/printer/Samsung-CLX-3175.xml
/root/foo2zjs/foomatic-db/printer/Xerox-Phaser_6110.xml
/root/foo2zjs/foomatic-db/printer/Xerox-Phaser_6115MFP.xml
/root/foo2zjs/icc2ps/AUTHORS
/root/foo2zjs/icc2ps/COPYING
/root/foo2zjs/icc2ps/Makefile
/root/foo2zjs/icc2ps/README
/root/foo2zjs/icc2ps/README.foo2zjs
/root/foo2zjs/icc2ps/cmscam02.c
/root/foo2zjs/icc2ps/cmscam97.c
/root/foo2zjs/icc2ps/cmscgats.c
/root/foo2zjs/icc2ps/cmscnvrt.c
/root/foo2zjs/icc2ps/cmserr.c
/root/foo2zjs/icc2ps/cmsgamma.c
/root/foo2zjs/icc2ps/cmsgmt.c
/root/foo2zjs/icc2ps/cmsintrp.c
/root/foo2zjs/icc2ps/cmsio0.c
/root/foo2zjs/icc2ps/cmsio1.c
/root/foo2zjs/icc2ps/cmslut.c
/root/foo2zjs/icc2ps/cmsmatsh.c
/root/foo2zjs/icc2ps/cmsmtrx.c
/root/foo2zjs/icc2ps/cmsnamed.c
/root/foo2zjs/icc2ps/cmspack.c
/root/foo2zjs/icc2ps/cmspcs.c
/root/foo2zjs/icc2ps/cmsps2.c
/root/foo2zjs/icc2ps/cmssamp.c
/root/foo2zjs/icc2ps/cmsvirt.c
/root/foo2zjs/icc2ps/cmswtpnt.c
/root/foo2zjs/icc2ps/cmsxform.c
/root/foo2zjs/icc2ps/icc2ps.c
/root/foo2zjs/icc2ps/icc34.h
/root/foo2zjs/icc2ps/lcms.h
/root/foo2zjs/icc2ps/xgetopt.c
/usr/bin/foo2zjs
/usr/bin/foo2zjs-getweb
/usr/bin/foo2zjs-pstops
/usr/bin/foo2zjs-wrapper
/usr/share/foo2zjs
/usr/share/cups/model/foo2zjs
/usr/share/cups/model/foo2zjs/Generic-OAKT_Printer.ppd.gz
/usr/share/cups/model/foo2zjs/Generic-ZjStream_Printer.ppd.gz
/usr/share/cups/model/foo2zjs/HP-Color_LaserJet_1500.ppd.gz
/usr/share/cups/model/foo2zjs/HP-Color_LaserJet_1600.ppd.gz
/usr/share/cups/model/foo2zjs/HP-Color_LaserJet_2600n.ppd.gz
/usr/share/cups/model/foo2zjs/HP-Color_LaserJet_CP1215.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_1000.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_1005.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_1018.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_1020.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_1022.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_M1005_MFP.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_M1120_MFP.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_M1319_MFP.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P1005.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P1006.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P1007.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P1008.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P1505.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P2014.ppd.gz
/usr/share/cups/model/foo2zjs/HP-LaserJet_P2035.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_1600W.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_1680MF.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_1690MF.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_2480_MF.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_2490_MF.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_2530_DL.ppd.gz
/usr/share/cups/model/foo2zjs/KONICA_MINOLTA-magicolor_4690MF.ppd.gz
/usr/share/cups/model/foo2zjs/Kyocera-KM-1635.ppd.gz
/usr/share/cups/model/foo2zjs/Kyocera-KM-2035.ppd.gz
/usr/share/cups/model/foo2zjs/Lexmark-C500.ppd.gz
/usr/share/cups/model/foo2zjs/Minolta-Color_PageWorks_Pro_L.ppd.gz
/usr/share/cups/model/foo2zjs/Minolta-magicolor_2200_DL.ppd.gz
/usr/share/cups/model/foo2zjs/Minolta-magicolor_2300_DL.ppd.gz
/usr/share/cups/model/foo2zjs/Minolta-magicolor_2430_DL.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C3100.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C3200.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C3300.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C3400.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C3530_MFP.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C5100.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C5200.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C5500.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C5600.ppd.gz
/usr/share/cups/model/foo2zjs/Oki-C5800.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLP-300.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLP-310.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLP-315.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLP-600.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLP-610.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLX-2160.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLX-3160.ppd.gz
/usr/share/cups/model/foo2zjs/Samsung-CLX-3175.ppd.gz
/usr/share/cups/model/foo2zjs/Xerox-Phaser_6110.ppd.gz
/usr/share/cups/model/foo2zjs/Xerox-Phaser_6115MFP.ppd.gz
/usr/share/doc/cups-drivers-foo2zjs-0.0
/usr/share/doc/cups-drivers-foo2zjs-0.0/COPYING
/usr/share/doc/cups-drivers-foo2zjs-0.0/ChangeLog
/usr/share/doc/cups-drivers-foo2zjs-0.0/INSTALL
/usr/share/doc/cups-drivers-foo2zjs-0.0/INSTALL.usb
/usr/share/doc/cups-drivers-foo2zjs-0.0/README
/usr/share/doc/cups-drivers-foo2zjs-0.0/manual.pdf
/usr/share/foo2zjs/crd
/usr/share/foo2zjs/firmware
/usr/share/foo2zjs/gamma-lookup.ps
/usr/share/foo2zjs/gamma.ps
/usr/share/foo2zjs/hplj1020_icon.gif
/usr/share/foo2zjs/hplj10xx_gui.tcl
/usr/share/foo2zjs/icm
/usr/share/foo2zjs/crd/2300w-1200@150-l250-kx,ucr100,0-per.crd
/usr/share/foo2zjs/crd/2300w-1200@150-l250-kx,ucr100,50-per.crd
/usr/share/foo2zjs/crd/2300w-1200@150-l250-kx,ucr100,75-per.crd
/usr/share/foo2zjs/crd/2300w-1200@150-l250-kx,ucr125,75-per.crd
/usr/share/foo2zjs/crd/kh.crd
/usr/share/foo2zjs/crd/kx.crd
/usr/share/foo2zjs/crd/prolog.ps
/usr/share/foo2zjs/crd/screen1200.ps
/usr/share/foo2zjs/crd/screen2400.ps
/usr/share/foomatic/db/source/driver/foo2zjs.xml
/usr/share/foomatic/db/source/opt/foo2zjs-ColorMode.xml
/usr/share/foomatic/db/source/opt/foo2zjs-Duplex.xml
/usr/share/foomatic/db/source/opt/foo2zjs-ICM.xml
/usr/share/foomatic/db/source/opt/foo2zjs-InputSlot.xml
/usr/share/foomatic/db/source/opt/foo2zjs-Intent.xml
/usr/share/foomatic/db/source/opt/foo2zjs-MediaType.xml
/usr/share/foomatic/db/source/opt/foo2zjs-PageSize.xml
/usr/share/foomatic/db/source/opt/foo2zjs-PrinterType.xml
/usr/share/foomatic/db/source/opt/foo2zjs-Resolution.xml
/usr/share/man/man1/foo2zjs-pstops.1.bz2
/usr/share/man/man1/foo2zjs-wrapper.1.bz2
/usr/share/man/man1/foo2zjs.1.bz2
/var/cache/apt/archives/cups-drivers-foo2zjs-0.0-0.20091014.1pclos2010.i586.rpm
[root@localhost ~]# foo2zjs

Thanks
 
Old 02-06-2010, 07:35 AM   #12
camorri
Senior Member
 
Registered: Nov 2002
Location: Somewhere inside 9.9 million sq. km. Canada
Distribution: Slackware 14.1
Posts: 4,873

Rep: Reputation: 434Reputation: 434Reputation: 434Reputation: 434Reputation: 434
Hmmm,

I see you installed this from an rpm file. It did create the firmware directory
Quote:
/usr/share/foo2zjs/firmware
( about 3/4 the way down the list of files ), and it appears to be empty.

So, I guess the challenge here is where do we find the firmware? I will do a little googling and see what I can turn up. I suspect that is all you need now.
 
Old 02-06-2010, 07:48 AM   #13
camorri
Senior Member
 
Registered: Nov 2002
Location: Somewhere inside 9.9 million sq. km. Canada
Distribution: Slackware 14.1
Posts: 4,873

Rep: Reputation: 434Reputation: 434Reputation: 434Reputation: 434Reputation: 434
After doing some more scratching around, I saw two things to follow up on. First of all, this comment on the driver web page.

Quote:
It supports also the Zenographics-based HP LaserJet 1000, 1005, 1018, 1020 and it works perhaps with other Zenographics-based printers. Note that these HP LaserJet models need their firmware loaded into the printer everytime when the printer is turned on. Please follow the instructions comming with the driver.
The last line, there are some README files in the above directory listing. Look through those for any instructions on using this driver.

The "fireware". I think there is a typo on the printing.org web page. I think the name of the file you are looking for is 'sihp1020.dll' this is a windows driver file, ( I think, at least it is a windoze .dll file ). I would think you would have a CD ( or floppy ) with the windoze drivers on it. Or even a windoze system wiht the driver installed. Look in those sources for the fireware file. If you can find it, just copy it to the /usr/share/foo2zjs/firmware/ directory, and re-try the command to load the driver. Watch the path, it has to match.
 
Old 02-06-2010, 08:43 AM   #14
pixellany
LQ Veteran
 
Registered: Nov 2005
Location: Annapolis, MD
Distribution: Arch/XFCE
Posts: 17,802

Rep: Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729Reputation: 729
I've just checked my home system and it is running the Gutenprint driver for my HP 1022---so this might be something to try. (There should be a Gutenprint package available using your package manager.

As with the office system, I do have the foo2zjs driver, but no sign of the firmware.
 
Old 02-06-2010, 09:30 AM   #15
ramly
LQ Newbie
 
Registered: Nov 2007
Posts: 13

Original Poster
Rep: Reputation: 0
Hi,

I was using Debian lenny till now. Printer installation is painless in that by following the instructions on http://foo2zjs.rkkda.com/ but in this case I have spent a lot of time over the installation. Now I think there is only one option to dump PCLinux and return to Debian id awtting up printer fails.
Thanks !
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing Driver for HP Laserjet 1020 daniell Linux - Newbie 23 04-23-2013 09:37 AM
instal hp laserjet 1020 printer in pclinuxos ramly Linux - Newbie 1 02-05-2010 12:55 PM
problems with hp 1020 laserjet printer in fedora 12 dnskdas Linux - Hardware 3 02-05-2010 08:49 AM
Laserjet 1020 with Foo2zjs Not Printing sloik2000 Linux - Hardware 4 06-22-2007 11:04 PM
on & off printing with HP Laserjet 1020 srtraveler Linux - Hardware 1 05-23-2007 10:30 PM


All times are GMT -5. The time now is 07:37 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration