LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 02-22-2011, 05:32 PM   #1
kcorkum
LQ Newbie
 
Registered: Feb 2011
Location: Lunenburg N.S. Canada
Posts: 2

Rep: Reputation: 0
I am having trouble getting JACK control to work with Soundblaster Audigy ZS 2


Hi All
I am having trouble getting the audio to work on this computer (ACER 5570-4765 with PCM Audigy ZS 2) running Ubuntu Studio 10.10.

I can get JACK to run without errors but I am not sure if settings are correct.

For now I would just like to listen to music using Audacious but I would eventually like to record guitar using Rakarrack (I have this installed but I am having zero luck with this as well)

I am a newbie and find JACK documentation very confusing. I am starting to like Linux though.

Thanks in advance for any help

Here are a few lines from the JACK message screen if this is any help

19:13:18.734 JACK is starting...
19:13:18.735 /usr/bin/jackd -P1 -dalsa -r44100 -p1024 -n2 -D -Chw:0 -Phw:0 -S -i1 -o1 -Xraw
19:13:18.748 JACK was started with PID=2671.
no message buffer overruns
no message buffer overruns
jackdmp 1.9.6
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2010 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 1
audio_reservation_init
Acquire audio card Audio0
creating alsa driver ... hw:0|hw:0|1024|2|44100|1|1|nomon|swmeter|-|16bit
Using ALSA driver Audigy2 running on card 0 - SB Audigy 2 ZS Notebook [SB0530] (rev.0, serial:0x20011102) at 0x6000, irq 20
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
scan: added port hw:0,0,0 in-hw-0-0-0-Audigy-MPU-401--UART-
scan: added port hw:0,0,0 out-hw-0-0-0-Audigy-MPU-401--UART-


Scans a bunch of ports then
:

ALSA lib rawmidi_hw.c:233snd_rawmidi_hw_open) open /dev/snd/midiC0D0 failed: Device or resource busy
scan: can't open port hw:0,0,0 in-hw-0-0-0-Audigy-MPU-401--UART-, error code -16, zombified
ALSA lib rawmidi_hw.c:233snd_rawmidi_hw_open) open /dev/snd/midiC0D0 failed: Device or resource busy
scan: can't open port hw:0,0,0 out-hw-0-0-0-Audigy-MPU-401--UART-, error code -16, zombified
 
Old 02-22-2011, 10:00 PM   #2
GlennsPref
Senior Member
 
Registered: Apr 2004
Location: Brisbane, Australia
Distribution: Mageia Studio-13.37 Kubuntu.
Posts: 3,325
Blog Entries: 33

Rep: Reputation: 199Reputation: 199
Hi, try the seq midi option instead of raw

Regards Glenn
 
1 members found this post helpful.
Old 03-03-2011, 05:18 PM   #3
kcorkum
LQ Newbie
 
Registered: Feb 2011
Location: Lunenburg N.S. Canada
Posts: 2

Original Poster
Rep: Reputation: 0
Thanks very much for your help. Works fine now.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Will a Soundblaster Audigy 2 Value Work? Trickj Linux - Hardware 6 12-13-2005 01:29 PM
Trouble with soundblaster audigy soundcard rafael_rms Linux - Hardware 2 09-17-2005 05:51 PM
Trouble getting Creative Labs SB Audigy LS to work. (no such device) fbred Linux - Hardware 11 01-22-2005 09:16 PM
SoundBlaster Audigy LS doesnt work nicksmart234 Linux - Hardware 4 10-04-2004 01:18 PM
Trouble getting Soundblaster live to work with Mandrake 9 beta SilentStrike Linux - Hardware 4 07-30-2002 10:21 PM


All times are GMT -5. The time now is 11:17 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration