|
how to solve failed dependency when dependency exists
Hello all,
Can someone tell me how to resolve this problem? I'm trying to install the RPM file <pips-spr300_310-cups-2.6.2-1.i386.rpm> so I can install my printer, an Epson Stylus Photo R300. I found both the RPM and the .tar file on Epson's site. The .tar file is <pips-spr300_310-2.6.2> and I have searched everywhere and tried everything I thought might help, but the following is returned whenever I try to install the RPM: [root@localhost dcramer]# cd /home/dcramer/rpms_files [root@localhost rpms_files]# rpm -iv pips-spr300_310-cups-2.6.2-1.i386.rpm error: Failed dependencies: libcrypto.so.0.9.6 is needed by pips-spr300_310-cups-2.6.2-1 libssl.so.0.9.6 is needed by pips-spr300_310-cups-2.6.2-1 [root@localhost rpms_files]# even though both files exist in /usr/lib. I also tried copying both files to the /usr/local/lib directory with no change. The only thing I haven't tried is trying to create a link to the RPM but I don't know how to proceed. On the other hand, if I try to install from the .tar file, I get the following: [root@localhost gz_files]# cd /home/dcramer/gz_files/pips-spr300_310-2.6.2 [root@localhost pips-spr300_310-2.6.2]# ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... found checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependant libraries... pass_all checking command to parse /usr/bin/nm -B output... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for ranlib... ranlib checking for strip... strip checking for objdir... .libs checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.lo... yes checking if gcc supports -fno-rtti -fno-exceptions... yes checking whether the linker (/usr/bin/ld) supports shared libraries... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether -lc should be explicitly linked in... no creating libtool checking for cups-config... yes checking for dlopen in -ldl... yes checking for pthread_create in -lpthread... yes checking for gtk-config... /usr/bin/gtk-config checking for GTK - version >= 0.99.7... yes checking for ANSI C header files... (cached) yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for strerror in -lcposix... no checking for gcc option to accept ANSI C... none needed checking for an ANSI C-conforming const... yes checking for off_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for pid_t... yes checking for unistd.h... (cached) yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... (cached) yes checking for working vfork... (cached) yes checking whether gcc needs -traditional... no checking for stdlib.h... (cached) yes checking for working malloc... yes checking for working memcmp... yes checking return type of signal handlers... void checking for alarm... yes checking for gettimeofday... yes checking for memset... yes checking for mkfifo... yes checking for select... yes checking for socket... yes checking for strcspn... yes checking for strstr... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ranlib... (cached) ranlib checking for inline... inline checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for stdlib.h... (cached) yes checking for unistd.h... (cached) yes checking for getpagesize... yes checking for working mmap... yes checking whether we are using the GNU C Library 2.1 or newer... yes checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for shared library run path origin... ./config.rpath: ./config.rpath: No such file or directory done checking for iconv... yes checking argz.h usability... yes checking argz.h presence... yes checking for argz.h... yes checking for limits.h... (cached) yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking nl_types.h usability... yes checking nl_types.h presence... yes checking for nl_types.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking for feof_unlocked... yes checking for fgets_unlocked... yes checking for getc_unlocked... yes checking for getcwd... yes checking for getegid... yes checking for geteuid... yes checking for getgid... yes checking for getuid... yes checking for mempcpy... yes checking for munmap... yes checking for putenv... yes checking for setenv... yes checking for setlocale... yes checking for stpcpy... yes checking for strcasecmp... yes checking for strdup... yes checking for strtoul... yes checking for tsearch... yes checking for __argz_count... yes checking for __argz_stringify... yes checking for __argz_next... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); checking for nl_langinfo and CODESET... yes checking for LC_MESSAGES... yes checking for bison... bison checking version of bison... 1.875, ok checking whether NLS is requested... yes checking whether included gettext is requested... no checking for GNU gettext in libc... yes configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating dtrfilter/Makefile config.status: creating ekpd/Makefile config.status: creating ekpd/rc/Makefile config.status: creating ekpnavi/Makefile config.status: creating ekpstm/Makefile config.status: creating freset/Makefile config.status: creating intl/Makefile config.status: creating layout_script/Makefile config.status: creating lib/Makefile config.status: creating pixmaps/Makefile config.status: creating po/Makefile.in config.status: creating ppd/Makefile config.status: creating setup/Makefile config.status: creating redhat/Makefile config.status: creating doc/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing default-1 commands config.status: executing default-2 commands config.status: creating po/POTFILES config.status: creating po/Makefile configure: configuring in libltdl configure: running /bin/sh './configure' --prefix=/usr --enable-ltdl-convenience --cache-file=/dev/null --srcdir=. loading cache /dev/null checking for a BSD compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for working aclocal... found checking for working autoconf... found checking for working automake... found checking for working autoheader... found checking for working makeinfo... found checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for working const... yes checking for inline... inline checking for Cygwin environment... no checking for mingw32 environment... no checking how to run the C preprocessor... gcc -E checking host system type... i686-pc-linux-gnu checking build system type... i686-pc-linux-gnu checking for ld used by GCC... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking for a sed that does not truncate output... /bin/sed checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for object suffix... o checking for executable suffix... no checking command to parse /usr/bin/nm -B output... ok checking for dlfcn.h... yes checking for ranlib... ranlib checking for strip... strip checking for objdir... .libs checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.lo... yes checking if gcc supports -fno-rtti -fno-exceptions... yes checking whether the linker (/usr/bin/ld) supports shared libraries... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking whether -lc should be explicitly linked in... no creating libtool checking for ANSI C header files... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking whether gcc supports assert without backlinking... checking which extension is used for shared libraries... .so checking which variable specifies run-time library path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib checking for objdir... .libs checking whether libtool supports -dlopen/-dlpreopen... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen in -ldl... yes checking for dlerror... yes checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... yes checking for error_t... yes checking for argz_append... yes checking for argz_create_sep... yes checking for argz_insert... yes checking for argz_next... yes checking for argz_stringify... yes checking for errno.h... yes checking for malloc.h... yes checking for memory.h... yes checking for stdlib.h... yes checking for stdio.h... yes checking for ctype.h... yes checking for unistd.h... yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for string.h... yes checking for strchr... yes checking for strrchr... yes checking for memcpy... yes checking for memmove... yes checking for strcmp... yes updating cache /dev/null creating ./config.status creating Makefile creating config.h config.h is unchanged [root@localhost pips-spr300_310-2.6.2]# make make all-recursive make[1]: Entering directory `/home/dcramer/gz_files/pips-spr300_310-2.6.2' Making all in libltdl make[2]: Entering directory `/home/dcramer/gz_files/pips-spr300_310-2.6.2/libltdl' /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c ltdl.c rm -f .libs/ltdl.lo gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c ltdl.c -fPIC -DPIC -o .libs/ltdl.lo gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c ltdl.c -o ltdl.o >/dev/null 2>&1 mv -f .libs/ltdl.lo ltdl.lo /bin/sh ./libtool --mode=link gcc -g -O2 -o libltdlc.la ltdl.lo -ldl rm -fr .libs/libltdlc.la .libs/libltdlc.* .libs/libltdlc.* ar cru .libs/libltdlc.al ltdl.lo ranlib .libs/libltdlc.al creating libltdlc.la (cd .libs && rm -f libltdlc.la && ln -s ../libltdlc.la libltdlc.la) make[2]: Leaving directory `/home/dcramer/gz_files/pips-spr300_310-2.6.2/libltdl' Making all in src make[2]: Entering directory `/home/dcramer/gz_files/pips-spr300_310-2.6.2/src' /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -I/usr/X11R6/include -DGS_PATH=\"gs\" -DLOCALEDIR=\"/usr/share/locale\" -DPRINTER_MODEL="\"Stylus Photo R300_310\"" -DSPR300_310 -DLIBPATH=\"/usr/lib/libspr300_310.so\" -DRSC_PATH=\"/etc/pipsrc\" -DSPOOL_NAME=\"spr300_310\" -DLOCALE_PATH=\"/usr/share/locale\" -DNAVI_PATH=\"/usr/bin/ekpnavi\" -DDATA_PATH=\"/usr/local/EPKowa/SPR300_310\" -DRULED_PATH=\"/usr/local/EPKowa/SPR300_310/BID.PRN\" -DPATCH_PATH=\"/usr/local/EPKowa/SPR300_310/PATCH.PRN\" -DBAND_PATH=\"/usr/local/EPKowa/SPR300_310/BAND.PRN\" -DCUT_PATH=\"/usr/local/EPKowa/SPR300_310/CUT.PRN\" -D_LPR_DIRECT -fsigned-char -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -g -O2 -Wall -c str.c ../libtool: line 1: s%^.*/%%: No such file or directory ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found ../libtool: line 1: -e: command not found : compile: cannot determine name of library object from `' make[2]: *** [str.lo] Error 1 make[2]: Leaving directory `/home/dcramer/gz_files/pips-spr300_310-2.6.2/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/dcramer/gz_files/pips-spr300_310-2.6.2' make: *** [all-recursive-am] Error 2 [root@localhost pips-spr300_310-2.6.2]# I'm running Fedora Core 2, kernel version 2.6.5-1.358, and gcc 3.4, on an Athlon 900 with 512 MB. If you need more information, let me know. Thanks in advance. Don Cramer |
Nasty :(.
Try forcing a non-dependency check: rpm -Uvh pips-spr300_310-cups-2.6.2-1.i386.rpm --nodeps Although many would not recommend that, I've got nearly everything I needed installed that way.. including emulators in Sun JDS, and never had any problems... Good luck! |
how to solve failed dependency when dependency exists
Hi Megaman,
Thanks for your fast reply. I tried the --nodeps switch a couple of days ago and it didn't seem to make a difference. Konsole took several minutes to bring up the command prompt again, the RPM was shown as broken, and synaptic would not allow me to attempt to reinstall. Plus, I still do not have a listing for the R300 in the driver list. Is there a way to force synaptic to see an individual RPM that has been D/L'd to a (probably) non-standard path? Thanks again. Don Cramer |
| All times are GMT -5. The time now is 01:51 AM. |