LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 07-21-2006, 11:07 AM   #1
jabka
Member
 
Registered: Sep 2005
Distribution: Debian unstable && Kazit (reformated knoppix)
Posts: 194

Rep: Reputation: 31
how to configure 6 button mouse


Howdy,...
i bought teac OfficeMouse ..
Quote:
mha13@debian:/proc/bus/usb$ cat ./devices

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16-2-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:07.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16-2-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1241 ProdID=1166 Rev= 2.80
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=043d ProdID=00b2 Rev= 0.01
S: Manufacturer=Lexmark
S: Product= 3300 Series
S: SerialNumber=23A0180170009GF
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 10mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
it is 6 button mouse and i have no idea how to configure the buttons ..

Last edited by jabka; 07-21-2006 at 11:14 AM.
 
Old 07-22-2006, 01:41 PM   #2
jabka
Member
 
Registered: Sep 2005
Distribution: Debian unstable && Kazit (reformated knoppix)
Posts: 194

Original Poster
Rep: Reputation: 31
can any one share his setting for his mouse

Hody,...
i found nice prog that is called xmodmap reading it man i get that i can change how it will work.
i have office mouse with 2 side buttons and an office button that i wish to configure.
i have found that
Code:
mha13@debian:~$ xmodmap -pp
There are 11 pointer buttons defined.

    Physical        Button
     Button          Code
        1              1
        2              2
        3              3
        4              4
        5              5
        6              6
        7              7
        8              8
        9              9
       10             10
       11             11
but i don't know what is what and how to add function to events,

could you plz hlp me . .
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Knoppix Can't access Teac USB floopy drive WindsorKnot Linux - Hardware 3 08-03-2005 06:47 PM
TEAC CDR and Mandrake 10 roggae Linux - Software 1 02-07-2005 07:06 PM
Teac USB Externall floppy in Slack 9.0 wesley13 Slackware 3 09-18-2003 09:13 PM
Teac CD-RW shows no files or folders Specmon Mandriva 0 08-25-2003 08:58 PM
TEAC driver...can't mount CD-R drive....let alone burn.. juagut Linux - General 1 08-20-2001 05:50 AM


All times are GMT -5. The time now is 10:44 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration