LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 04-11-2011, 11:05 PM   #31
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0

[ 0.197036] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.197214] ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.197402] ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.197590] ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.197778] ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.197975] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.198155] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[ 0.198344] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.198533] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.198720] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.198909] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.199095] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.199285] ACPI: PCI Interrupt Link [LSA0] (IRQs *5 7 9 10 11 14 15)
[ 0.199473] ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 *10 11 14 15)
[ 0.199664] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
[ 0.199913] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.200129] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.200365] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.200612] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.200858] ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0, disabled.
[ 0.201083] ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
[ 0.201320] ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled.
[ 0.201567] ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
[ 0.201814] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.202043] ACPI: PCI Interrupt Link [AMA1] (IRQs 20 21 22 23) *0
[ 0.202291] ACPI: PCI Interrupt Link [AMAC] (IRQs 20 21 22 23) *0
[ 0.202539] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.202787] ACPI: PCI Interrupt Link [AACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.203030] ACPI: PCI Interrupt Link [AMCI] (IRQs 20 21 22 23) *0, disabled.
[ 0.203278] ACPI: PCI Interrupt Link [ASMB] (IRQs 20 21 22 23) *0, disabled.
[ 0.203526] ACPI: PCI Interrupt Link [AUS2] (IRQs 20 21 22 23) *0
[ 0.203774] ACPI: PCI Interrupt Link [AIDE] (IRQs 20 21 22 23) *0, disabled.
[ 0.204014] ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21 22 23) *0
[ 0.204262] ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21 22 23) *0
[ 0.204510] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.204577] PCI: Using ACPI for IRQ routing
[ 0.208986] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.208990] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.217272] pnp: PnP ACPI init
[ 0.217278] ACPI: bus type pnp registered
[ 0.221766] pnp: PnP ACPI: found 12 devices
[ 0.221768] ACPI: ACPI bus type pnp unregistered
[ 0.221770] PnPBIOS: Disabled by ACPI PNP
[ 0.221776] system 00:00: ioport range 0x1000-0x107f has been reserved
[ 0.221778] system 00:00: ioport range 0x1080-0x10ff has been reserved
[ 0.221780] system 00:00: ioport range 0x1400-0x147f has been reserved
[ 0.221782] system 00:00: ioport range 0x1480-0x14ff has been reserved
[ 0.221784] system 00:00: ioport range 0x1800-0x187f has been reserved
[ 0.221786] system 00:00: ioport range 0x1880-0x18ff has been reserved
[ 0.221790] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.221792] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.221797] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.221801] system 00:0b: iomem range 0xd0000-0xd3fff has been reserved
[ 0.221803] system 00:0b: iomem range 0xd5800-0xd7fff has been reserved
[ 0.221805] system 00:0b: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.221807] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.221809] system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved
[ 0.221811] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.221813] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.221815] system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.221817] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.221819] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.221821] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.221823] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.221825] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.221827] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.256776] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.256778] pci 0000:00:04.0: IO window: 0x9000-0x9fff
[ 0.256781] pci 0000:00:04.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.256783] pci 0000:00:04.0: PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
[ 0.256788] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.256790] pci 0000:00:0e.0: IO window: 0x7000-0x8fff
[ 0.256792] pci 0000:00:0e.0: MEM window: 0xdd000000-0xdeffffff
[ 0.256794] pci 0000:00:0e.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.256797] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
[ 0.256799] pci 0000:00:12.0: IO window: 0x6000-0x6fff
[ 0.256801] pci 0000:00:12.0: MEM window: 0xdfc00000-0xdfcfffff
[ 0.256804] pci 0000:00:12.0: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
[ 0.256807] pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
[ 0.256808] pci 0000:00:16.0: IO window: 0x5000-0x5fff
[ 0.256811] pci 0000:00:16.0: MEM window: 0xdfa00000-0xdfafffff
[ 0.256813] pci 0000:00:16.0: PREFETCH window: 0x000000df900000-0x000000df9fffff
[ 0.256816] pci 0000:00:17.0: PCI bridge, secondary bus 0000:05
[ 0.256818] pci 0000:00:17.0: IO window: 0x4000-0x4fff
[ 0.256820] pci 0000:00:17.0: MEM window: 0xdf800000-0xdf8fffff
[ 0.256822] pci 0000:00:17.0: PREFETCH window: 0x000000df700000-0x000000df7fffff
[ 0.256828] pci 0000:00:04.0: setting latency timer to 64
[ 0.256832] pci 0000:00:0e.0: setting latency timer to 64
[ 0.256835] pci 0000:00:12.0: setting latency timer to 64
[ 0.256839] pci 0000:00:16.0: setting latency timer to 64
[ 0.256843] pci 0000:00:17.0: setting latency timer to 64
[ 0.256845] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.256846] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.256848] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.256850] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.256851] pci_bus 0000:01: resource 2 mem: [0xdfd00000-0xdfdfffff]
[ 0.256853] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.256855] pci_bus 0000:02: resource 0 io: [0x7000-0x8fff]
[ 0.256856] pci_bus 0000:02: resource 1 mem: [0xdd000000-0xdeffffff]
[ 0.256858] pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.256859] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.256861] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.256863] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff]
[ 0.256864] pci_bus 0000:03: resource 1 mem: [0xdfc00000-0xdfcfffff]
[ 0.256866] pci_bus 0000:03: resource 2 mem: [0xdfb00000-0xdfbfffff]
[ 0.256867] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.256869] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff]
[ 0.256871] pci_bus 0000:04: resource 1 mem: [0xdfa00000-0xdfafffff]
[ 0.256872] pci_bus 0000:04: resource 2 mem: [0xdf900000-0xdf9fffff]
[ 0.256874] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.256875] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 0.256877] pci_bus 0000:05: resource 1 mem: [0xdf800000-0xdf8fffff]
[ 0.256879] pci_bus 0000:05: resource 2 mem: [0xdf700000-0xdf7fffff]
[ 0.256880] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
[ 0.256913] NET: Registered protocol family 2
[ 0.274318] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.274572] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.275039] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.275907] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.275909] TCP reno registered
[ 0.281343] NET: Registered protocol family 1
[ 0.281431] checking if image is initramfs... it is
[ 0.661958] Freeing initrd memory: 6750k freed
[ 0.662744] audit: initializing netlink socket (disabled)
[ 0.662755] type=2000 audit(1302551514.662:1): initialized
[ 0.662943] highmem bounce pool size: 64 pages
[ 0.662946] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.663038] VFS: Disk quotas dquot_6.5.2
[ 0.663068] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.663103] msgmni has been set to 1713
[ 0.663246] alg: No test for stdrng (krng)
[ 0.663290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.663293] io scheduler noop registered
[ 0.663294] io scheduler anticipatory registered
[ 0.663295] io scheduler deadline registered
[ 0.663306] io scheduler cfq registered (default)
[ 0.663315] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.663340] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 0.675778] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.675786] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.675794] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.675800] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.675808] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.675818] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.675828] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.675835] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.675844] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.675852] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.675864] pci 0000:02:0a.0: Boot video device
[ 0.675954] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.675980] pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.676079] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 0.676110] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X
[ 0.676204] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 0.676235] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X
[ 0.676337] pcieport-driver 0000:00:17.0: setting latency timer to 64
[ 0.676368] pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X
[ 0.676670] isapnp: Scanning for PnP cards...
[ 1.032148] isapnp: No Plug & Play device found
[ 1.034800] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 1.034911] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.035636] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.036898] brd: module loaded
[ 1.036953] Fixed MDIO Bus: probed
[ 1.037033] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.037035] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.037410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.037531] mice: PS/2 mouse device common for all mice
[ 1.037597] rtc_cmos 00:04: RTC can wake from S4
[ 1.037655] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.037704] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.037735] cpuidle: using governor ladder
[ 1.037737] cpuidle: using governor menu
[ 1.037740] No iBFT detected.
[ 1.038052] TCP cubic registered
[ 1.038054] NET: Registered protocol family 17
[ 1.038095] Using IPI No-Shortcut mode
[ 1.038282] registered taskstats version 1
[ 1.038427] rtc_cmos 00:04: setting system clock to 2011-04-11 19:51:55 UTC (1302551515)
[ 1.038601] Freeing unused kernel memory: 308k freed
[ 1.055070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.135514] fuse init (API version 7.11)
[ 1.140493] fan PNP0C0B:00: registered as cooling_device0
[ 1.140498] ACPI: Fan [FAN] (on)
[ 1.145691] processor ACPI_CPU:00: registered as cooling_device1
[ 1.145741] processor ACPI_CPU:01: registered as cooling_device2
[ 1.147647] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.148023] ACPI: Thermal Zone [THRM] (40 C)
[ 1.159565] md: linear personality registered for level -1
[ 1.162631] md: multipath personality registered for level -4
[ 1.165885] md: raid0 personality registered for level 0
[ 1.169763] md: raid1 personality registered for level 1
[ 1.172398] xor: measuring software checksum speed
[ 1.177004] 8regs : 4140.000 MB/sec
[ 1.182004] 8regs_prefetch: 4012.000 MB/sec
[ 1.187004] 32regs : 3044.000 MB/sec
[ 1.192003] 32regs_prefetch: 2952.000 MB/sec
[ 1.192005] xor: using function: 8regs (4140.000 MB/sec)
[ 1.192510] async_tx: api initialized (async)
[ 1.212026] raid6: int32x1 1031 MB/s
[ 1.229302] raid6: int32x2 1113 MB/s
[ 1.246319] raid6: int32x4 1078 MB/s
[ 1.263333] raid6: int32x8 855 MB/s
[ 1.280284] raid6: mmxx1 2179 MB/s
[ 1.297263] raid6: mmxx2 3906 MB/s
[ 1.314261] raid6: sse1x1 2585 MB/s
[ 1.331271] raid6: sse1x2 4445 MB/s
[ 1.348260] raid6: sse2x1 4199 MB/s
[ 1.365265] raid6: sse2x2 5835 MB/s
[ 1.365266] raid6: using algorithm sse2x2 (5835 MB/s)
[ 1.365268] md: raid6 personality registered for level 6
[ 1.365270] md: raid5 personality registered for level 5
[ 1.365271] md: raid4 personality registered for level 4
[ 1.384171] md: raid10 personality registered for level 10
[ 1.648237] usbcore: registered new interface driver usbfs
[ 1.648258] usbcore: registered new interface driver hub
[ 1.648279] usbcore: registered new device driver usb
[ 1.649614] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.649929] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 1.649938] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 1.649964] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 1.649966] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 1.650023] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
[ 1.650074] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xdffff000
[ 1.651649] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.651651] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.668026] Uniform Multi-Platform E-IDE driver
[ 1.681495] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.681506] firewire_ohci 0000:02:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 1.681510] firewire_ohci 0000:02:08.0: setting latency timer to 64
[ 1.703041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.703044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.703046] usb usb1: Product: OHCI Host Controller
[ 1.703047] usb usb1: Manufacturer: Linux 2.6.29-1-multimedia-686 ohci_hcd
[ 1.703048] usb usb1: SerialNumber: 0000:00:0a.0
[ 1.703105] usb usb1: configuration #1 chosen from 1 choice
[ 1.703126] hub 1-0:1.0: USB hub found
[ 1.703134] hub 1-0:1.0: 10 ports detected
[ 1.703608] ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 22
[ 1.703618] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[AUS2] -> GSI 22 (level, low) -> IRQ 22
[ 1.703638] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 1.703640] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 1.703659] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
[ 1.703679] ehci_hcd 0000:00:0a.1: debug port 1
[ 1.703682] ehci_hcd 0000:00:0a.1: cache line size of 64 is not supported
[ 1.704287] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xdfffe000
[ 1.711012] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 1.711025] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.711027] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.711028] usb usb2: Product: EHCI Host Controller
[ 1.711029] usb usb2: Manufacturer: Linux 2.6.29-1-multimedia-686 ehci_hcd
[ 1.711031] usb usb2: SerialNumber: 0000:00:0a.1
[ 1.711071] usb usb2: configuration #1 chosen from 1 choice
[ 1.711088] hub 2-0:1.0: USB hub found
[ 1.711093] hub 2-0:1.0: 10 ports detected
[ 1.711245] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
[ 1.711528] ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 21
[ 1.711536] forcedeth 0000:00:10.0: PCI INT A -> Link[AMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.711539] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.711562] nv_probe: set workaround bit for reversed mac addr
[ 1.739015] firewire_ohci: Added fw-ohci device 0000:02:08.0, OHCI version 1.10
[ 1.739381] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.739392] SiI_IDE 0000:02:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 1.739409] siimage 0000:02:09.0: IDE controller (0x1095:0x0680 rev 0x02)
[ 1.739424] SiI_IDE 0000:02:09.0: setting latency timer to 64
[ 1.739429] siimage 0000:02:09.0: BASE CLOCK == 133
[ 1.739431] siimage 0000:02:09.0: 100% native mode on irq 17
[ 1.739435] ide0: MMIO-DMA
[ 1.739440] ide1: MMIO-DMA
[ 1.739444] Probing IDE interface ide0...
[ 1.768463] Floppy drive(s): fd0 is 1.44M
[ 1.783902] FDC 0 is a post-1991 82077
[ 2.223475] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 2, addr 00:15:58:69:bb:ea
[ 2.223478] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 2.223968] ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 20
[ 2.223977] forcedeth 0000:00:11.0: PCI INT A -> Link[AMA1] -> GSI 20 (level, low) -> IRQ 20
[ 2.223981] forcedeth 0000:00:11.0: setting latency timer to 64
[ 2.224032] nv_probe: set workaround bit for reversed mac addr
[ 2.238060] firewire_core: created device fw0: GUID 00206b7500016c20, S800
[ 2.258033] Probing IDE interface ide1...
[ 2.994453] usb 1-6: new low speed USB device using ohci_hcd and address 2
[ 3.005471] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 3, addr 00:15:58:69:bb:e9
[ 3.005474] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 3.016427] SCSI subsystem initialized
[ 3.017800] amd74xx 0000:00:0c.0: UDMA133 controller
[ 3.017803] amd74xx 0000:00:0c.0: IDE controller (0x10de:0x036e rev 0xa1)
[ 3.017817] amd74xx 0000:00:0c.0: IDE port disabled
[ 3.017823] amd74xx 0000:00:0c.0: BIOS didn't set cable bits correctly. Enabling workaround.
[ 3.017826] amd74xx 0000:00:0c.0: not 100% native mode: will probe irqs later
[ 3.017829] ide2: BM-DMA at 0xf000-0xf007
[ 3.017833] Probing IDE interface ide2...
[ 3.038729] libata version 3.00 loaded.
[ 3.183047] usb 1-6: New USB device found, idVendor=046d, idProduct=c05a
[ 3.183050] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.183051] usb 1-6: Product: USB Optical Mouse
[ 3.183053] usb 1-6: Manufacturer: Logitech
[ 3.183105] usb 1-6: configuration #1 chosen from 1 choice
[ 3.198166] usbcore: registered new interface driver hiddev
[ 3.204255] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb1/1-6/1-6:1.0/input/input1
[ 3.208052] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0a.0-6/input0
[ 3.208064] usbcore: registered new interface driver usbhid
[ 3.208066] usbhid: v2.6:USB HID core driver
[ 3.281112] hde: WDC WD3000JB-00KFA0, ATA DISK drive
[ 3.402189] ide0 at 0xf802c080-0xf802c087,0xf802c08a on irq 17
[ 3.402198] ide1 at 0xf802c0c0-0xf802c0c7,0xf802c0ca on irq 17
[ 3.447026] usb 1-7: new full speed USB device using ohci_hcd and address 3
[ 3.636048] usb 1-7: New USB device found, idVendor=058f, idProduct=9254
[ 3.636050] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.636051] usb 1-7: Product: Generic USB Hub
[ 3.636053] usb 1-7: Manufacturer: ALCOR
[ 3.636106] usb 1-7: configuration #1 chosen from 1 choice
[ 3.639062] hub 1-7:1.0: USB hub found
[ 3.642044] hub 1-7:1.0: 4 ports detected
[ 3.893057] hde: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.893130] hde: UDMA/100 mode selected
[ 3.893281] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.911500] sata_nv 0000:00:0d.0: version 3.5
[ 3.911816] ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 23
[ 3.911819] sata_nv 0000:00:0d.0: PCI INT A -> Link[ASA0] -> GSI 23 (level, low) -> IRQ 23
[ 3.911822] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 3.911884] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 3.913032] scsi0 : sata_nv
[ 3.916986] scsi1 : sata_nv
[ 3.917156] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 3.917159] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 3.919421] ide-gd driver 1.18
[ 3.919437] hde: max request size: 512KiB
[ 3.919527] hde: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63
[ 3.919718] hde: cache flushes supported
[ 3.919751] hde:<6>usb 1-9: new full speed USB device using ohci_hcd and address 4
[ 3.955104] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 3.955106] GPT:268435454 != 586072367
[ 3.955107] GPT:Alternate GPT header not at the end of the disk.
[ 3.955108] GPT:268435454 != 586072367
[ 3.955109] GPT: Use GNU Parted to correct GPT errors.
[ 3.955111] hde1 hde2
[ 4.087023] usb 1-9: device descriptor read/64, error -62
[ 4.352021] usb 1-9: device descriptor read/64, error -62
[ 4.611013] usb 1-9: new full speed USB device using ohci_hcd and address 5
[ 4.775023] usb 1-9: device descriptor read/64, error -62
[ 4.790041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.793351] ata1.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[ 4.793353] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.799359] ata1.00: configured for UDMA/133
[ 4.799426] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5
[ 5.041019] usb 1-9: device descriptor read/64, error -62
[ 5.299024] usb 1-9: new full speed USB device using ohci_hcd and address 6
[ 5.673045] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.689155] ata2.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
[ 5.689157] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.695389] ata2.00: configured for UDMA/133
[ 5.695438] scsi 1:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
[ 5.695803] ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 22
[ 5.695806] sata_nv 0000:00:0d.1: PCI INT B -> Link[ASA1] -> GSI 22 (level, low) -> IRQ 22
[ 5.695808] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 5.695852] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 5.696017] scsi2 : sata_nv
[ 5.696066] scsi3 : sata_nv
[ 5.696237] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22
[ 5.696239] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22
[ 5.704035] usb 1-9: device not accepting address 6, error -62
[ 5.861021] usb 1-9: new full speed USB device using ohci_hcd and address 7
[ 6.267021] usb 1-9: device not accepting address 7, error -62
[ 6.267083] hub 1-0:1.0: unable to enumerate USB device on port 9
[ 6.429686] ata3: SATA link down (SStatus 0 SControl 300)
[ 7.173448] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.173745] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 7.173748] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 7.173750] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 7.173788] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 7.173917] scsi4 : sata_nv
[ 7.174235] scsi5 : sata_nv
[ 7.174375] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21
[ 7.174378] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21
[ 7.907437] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.640436] ata6: SATA link down (SStatus 0 SControl 300)
[ 8.647329] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.647349] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 8.655655] Driver 'sd' needs updating - please use bus_type methods
[ 8.655731] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 8.655741] sd 0:0:0:0: [sda] Write Protect is off
[ 8.655743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.655757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.655803] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 8.655811] sd 0:0:0:0: [sda] Write Protect is off
[ 8.655813] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.655826] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.655829] sda: sda1 sda2 < sda5 >
[ 8.693407] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.693448] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 8.693456] sd 1:0:0:0: [sdb] Write Protect is off
[ 8.693458] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.693471] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.693501] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 8.693509] sd 1:0:0:0: [sdb] Write Protect is off
[ 8.693511] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.693524] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.693526] sdb: sdb1
[ 8.700873] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 8.870414] PM: Starting manual resume from disk
[ 8.922854] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.922881] kjournald starting. Commit interval 5 seconds
[ 11.754422] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 11.763997] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.832668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.837281] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 11.876716] i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf800
[ 11.876729] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[ 11.901101] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 11.908706] ACPI: Power Button (FF) [PWRF]
[ 11.908784] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 11.918034] ACPI: Power Button (CM) [PWRB]
[ 12.872506] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 12.872510] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 12.874204] HDA Intel 0000:00:0e.1: setting latency timer to 64
[ 13.061019] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 14.590151] loop: module loaded
[ 14.632996] lp: driver loaded but no devices found
[ 14.901883] Adding 6080560k swap on /dev/sda5. Priority:-1 extents:1 across:6080560k
[ 15.402763] EXT3 FS on sda1, internal journal
[ 16.110439] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.704431] sensors[3330]: segfault at 46 ip b7f462cd sp bf9755f0 error 4 in libc-2.7.so[b7eec000+149000]
[ 17.705328] sensors[3331]: segfault at 46 ip b7e852cd sp bfbb2840 error 4 in libc-2.7.so[b7e2b000+149000]
[ 20.551799] NET: Registered protocol family 10
[ 20.552807] lo: Disabled Privacy Extensions
[ 20.840568] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 20.911663] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 20.911666] apm: disabled - APM is not SMP safe.
[ 21.108029] ppdev: user-space parallel port driver
[ 24.037150] forcedeth 0000:00:11.0: irq 28 for MSI/MSI-X
[ 24.037381] eth1: no link during initialization.
[ 24.037849] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 24.155547] forcedeth 0000:00:10.0: irq 29 for MSI/MSI-X
[ 24.155767] eth0: no link during initialization.
[ 24.156201] ADDRCONF(NETDEV_UP): eth0: link is not ready
 
Old 04-11-2011, 11:13 PM   #32
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by stress_junkie View Post
Yes but I don't know if the IDE drive is connected via an internal cable or an external USB adapter. What I was thinking was that if the drive was connected via an external USB cable then there should be some messages about it in the dmesg buffer. Now I realize that we don't know what the device name is so we don't know what to look for. I thought that we might see something like "I/O error" when the disk is attached after Linux is running.

Can you check the jumpers on the IDE drive to ensure that the Master/Slave/Cable Select are properly set? Some drives, like Maxtor, prefer Cable Select while others prefer the Master/Slave settings.
It is connected via direct cable to the mobo. Western Digital 300GB no jumpers
 
Old 04-11-2011, 11:16 PM   #33
stress_junkie
Senior Member
 
Registered: Dec 2005
Location: Massachusetts, USA
Distribution: Ubuntu 10.04 and CentOS 5.5
Posts: 3,873

Rep: Reputation: 332Reputation: 332Reputation: 332Reputation: 332
Quote:
[ 3.281112] hde: WDC WD3000JB-00KFA0, ATA DISK drive
[ 3.402189] ide0 at 0xf802c080-0xf802c087,0xf802c08a on irq 17
[ 3.402198] ide1 at 0xf802c0c0-0xf802c0c7,0xf802c0ca on irq 17
...
[ 3.893057] hde: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.893130] hde: UDMA/100 mode selected
[ 3.893281] ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
...
[ 3.919421] ide-gd driver 1.18
[ 3.919437] hde: max request size: 512KiB
[ 3.919527] hde: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63
[ 3.919718] hde: cache flushes supported
[ 3.919751] hde:<6>usb 1-9: new full speed USB device using ohci_hcd and address 4
[ 3.955104] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 3.955106] GPT:268435454 != 586072367
[ 3.955107] GPT:Alternate GPT header not at the end of the disk.
[ 3.955108] GPT:268435454 != 586072367
[ 3.955109] GPT: Use GNU Parted to correct GPT errors.
[ 3.955111] hde1 hde2
So I'm going to guess that the IDE drive in question is a Wester Digital WD3000JB-00KFA0, it is divided into two partitions, and it is using the GPT partition scheme rather than the MBR partition scheme.

There are some errors about the GPT headers not being correct. I don't know if 64Studio or Ubuntu can use GPT partitioned disks. I just haven't run into them yet.

I would still check the jumper on the disk (Master/Slave/Cable Select).

Other than that you might go back to EDDY1's idea of checking to see what user groups your account is in. It needs to be a member of the disk group, probably, among all of the others that it is a member of. Don't remove any group memberships; just ensure that the disk group is in the list.

Let us know how that works out. If you have to add your account to the disk group then you will have to log off and log back on to make that take effect.

Last edited by stress_junkie; 04-11-2011 at 11:19 PM.
 
Old 04-11-2011, 11:19 PM   #34
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0
ok... how do I add my account to the disk group?
 
Old 04-11-2011, 11:22 PM   #35
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
Looks like Hfsutils, what you think stressjunkie?
 
Old 04-11-2011, 11:24 PM   #36
stress_junkie
Senior Member
 
Registered: Dec 2005
Location: Massachusetts, USA
Distribution: Ubuntu 10.04 and CentOS 5.5
Posts: 3,873

Rep: Reputation: 332Reputation: 332Reputation: 332Reputation: 332
Quote:
Originally Posted by EDDY1 View Post
Looks like Hfsutils, what you think stressjunkie?
I don't know. I'm wondering if the disk was a Windows Dynamic Volume as compared to a Windows Basic Volume. I really don't know.

I'm surprised that an IDE disk doesn't have any jumpers set.
 
Old 04-11-2011, 11:26 PM   #37
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by stress_junkie View Post
I don't know. I'm wondering if the disk was a Windows Dynamic Volume as compared to a Windows Basic Volume. I really don't know.

I'm surprised that an IDE disk doesn't have any jumpers.
it is a dynamic volume and I just don't have any jumpers on the drive currently
 
Old 04-11-2011, 11:29 PM   #38
stress_junkie
Senior Member
 
Registered: Dec 2005
Location: Massachusetts, USA
Distribution: Ubuntu 10.04 and CentOS 5.5
Posts: 3,873

Rep: Reputation: 332Reputation: 332Reputation: 332Reputation: 332
Quote:
Originally Posted by BrianKirsch View Post
ok... how do I add my account to the disk group?
EDDY1 had the procedure.

System -> Administration -> Users and Groups

When the window opens you will see your user account name. Click on the "Manage Groups" button. You will see all of the groups that your account belongs to. (I can't get away from those dangling participles to save my life!)

Anyway if you see "disk" in the list then you are already a member of that group. If not then you can click on the Add button and select the disk group to add your account to that group.
 
Old 04-11-2011, 11:31 PM   #39
stress_junkie
Senior Member
 
Registered: Dec 2005
Location: Massachusetts, USA
Distribution: Ubuntu 10.04 and CentOS 5.5
Posts: 3,873

Rep: Reputation: 332Reputation: 332Reputation: 332Reputation: 332
Quote:
Originally Posted by BrianKirsch View Post
it is a dynamic volume and I just don't have any jumpers on the drive currently
I haven't used Windows Dynamic Volumes under Linux. That may be the cause of the GPT header errors. It may just be that Linux doesn't understand Windows Dynamic Volumes.
 
Old 04-11-2011, 11:31 PM   #40
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
GPT is usally mac, mac is hfs

Actually dmesg said use gparted
OP can check in disk utility or "sudo fdisk -l"

Last edited by EDDY1; 04-11-2011 at 11:34 PM.
 
Old 04-11-2011, 11:35 PM   #41
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by stress_junkie View Post
EDDY1 had the procedure.

System -> Administration -> Users and Groups

When the window opens you will see your user account name. Click on the "Manage Groups" button. You will see all of the groups that your account belongs to. (I can't get away from those dangling participles to save my life!)

Anyway if you see "disk" in the list then you are already a member of that group. If not then you can click on the Add button and select the disk group to add your account to that group.
and, as fate would have it... "disk" isn't one of the options in the list :-(
 
Old 04-11-2011, 11:37 PM   #42
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
Quote:
it is a dynamic volume and I just don't have any jumpers on the drive currently
If the probem is jumpers you can put jumpers and reboot, just make linux boot priority
 
Old 04-11-2011, 11:38 PM   #43
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by EDDY1 View Post
If the probem is jumpers you can put jumpers and reboot, just make linux boot priority
Master, slave or Cable Select?
 
Old 04-11-2011, 11:41 PM   #44
stress_junkie
Senior Member
 
Registered: Dec 2005
Location: Massachusetts, USA
Distribution: Ubuntu 10.04 and CentOS 5.5
Posts: 3,873

Rep: Reputation: 332Reputation: 332Reputation: 332Reputation: 332
If it is connected at the end of the cable then master, if it is on the middle connector then slave as long as there is a disk on the end connector.

If there is another disk on the same cable then it has to have the correct jumper setting as well.
 
Old 04-11-2011, 11:42 PM   #45
BrianKirsch
LQ Newbie
 
Registered: Apr 2011
Posts: 21

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by stress_junkie View Post
If it is connected at the end of the cable then master, if it is on the middle connector then slave as long as there is a disk on the end connector.

If there is another disk on the same cable then it has to have the correct jumper setting as well.
well... no jumper is the Master setting and it is at the end of the cable
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I mount two different hard drives to the same folder? WrecklessSandwich Linux - General 9 04-18-2006 08:29 PM
Hard drives fail to mount. MurX Linux - Hardware 4 11-01-2005 06:36 AM
Mount Hard Drives?? Steidart Mandriva 8 02-02-2004 10:46 AM
Can't mount ntfs hard drives? justin9 Linux - Newbie 8 07-15-2003 12:02 AM
Mount new hard drives to linux box. piglingz Linux - Hardware 4 02-12-2003 10:12 PM


All times are GMT -5. The time now is 06:22 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration