lupusarcanus |
12-21-2009 12:17 PM |
How do I disable this "feature"?
Hello. I have an Acer Aspire One D250 laptop running Ubuntu Karmic 9.10.
Every time I plug in or pull out my AC Adapter, my computer goes into sleep mode. How do I disable this feature?
Just in case you need it here is the dmesg output after an instance of this happening:
Code:
[ 0.972450] ACPI: Power Button [PWRB]
[ 0.972542] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.972625] ACPI: Lid Switch [LID0]
[ 0.972727] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.972735] ACPI: Sleep Button [SLPB]
[ 0.973030] fan PNP0C0B:00: registered as cooling_device0
[ 0.973043] ACPI: Fan [FAN] (on)
[ 0.974390] ACPI: SSDT 7f592c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.975205] ACPI: SSDT 7f591e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.976799] Marking TSC unstable due to TSC halts in idle
[ 0.976839] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.976888] processor LNXCPU:00: registered as cooling_device1
[ 0.976897] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.977645] ACPI: SSDT 7f592f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.978371] ACPI: SSDT 7f590f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.980088] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.980145] processor LNXCPU:01: registered as cooling_device2
[ 0.980155] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.042895] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.042913] ACPI: Thermal Zone [THRM] (27 C)
[ 1.043054] isapnp: Scanning for PnP cards...
[ 1.397283] isapnp: No Plug & Play device found
[ 1.696204] ACPI: Battery Slot [BAT0] (battery present)
[ 1.696512] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.699156] brd: module loaded
[ 1.700202] loop: module loaded
[ 1.700385] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.700551] ahci 0000:00:1f.2: version 3.0
[ 1.700581] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.700646] alloc irq_desc for 27 on node -1
[ 1.700651] alloc kstat_irqs on node -1
[ 1.700670] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.700733] ahci: SSS flag set, parallel bus scan disabled
[ 1.700783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.700791] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 1.700801] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.701179] scsi0 : ahci
[ 1.701426] scsi1 : ahci
[ 1.701563] scsi2 : ahci
[ 1.701693] scsi3 : ahci
[ 1.702066] ata1: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344100 irq 27
[ 1.702073] ata2: DUMMY
[ 1.702079] ata3: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344200 irq 27
[ 1.702084] ata4: DUMMY
[ 1.702240] ata_piix 0000:00:1f.1: version 2.13
[ 1.702271] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.702352] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.702505] scsi4 : ata_piix
[ 1.702646] scsi5 : ata_piix
[ 1.703686] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[ 1.703695] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[ 1.704061] ata6: port disabled. ignoring.
[ 1.705836] Fixed MDIO Bus: probed
[ 1.705922] PPP generic driver version 2.4.2
[ 1.706131] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.706175] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.706208] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.706215] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.706325] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.710253] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.710265] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.710295] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x96344400
[ 1.724031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.724196] usb usb1: configuration #1 chosen from 1 choice
[ 1.724266] hub 1-0:1.0: USB hub found
[ 1.724282] hub 1-0:1.0: 8 ports detected
[ 1.724422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.724463] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.724534] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.724548] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.724555] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.724633] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.724674] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[ 1.724850] usb usb2: configuration #1 chosen from 1 choice
[ 1.724914] hub 2-0:1.0: USB hub found
[ 1.724929] hub 2-0:1.0: 2 ports detected
[ 1.725027] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.725040] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.725047] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.725112] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.725164] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[ 1.725336] usb usb3: configuration #1 chosen from 1 choice
[ 1.725398] hub 3-0:1.0: USB hub found
[ 1.725413] hub 3-0:1.0: 2 ports detected
[ 1.725515] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.725528] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.725534] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.725601] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.725651] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[ 1.725821] usb usb4: configuration #1 chosen from 1 choice
[ 1.725882] hub 4-0:1.0: USB hub found
[ 1.725897] hub 4-0:1.0: 2 ports detected
[ 1.725989] alloc irq_desc for 19 on node -1
[ 1.725995] alloc kstat_irqs on node -1
[ 1.726008] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.726019] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.726027] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.726099] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.726150] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[ 1.726325] usb usb5: configuration #1 chosen from 1 choice
[ 1.726387] hub 5-0:1.0: USB hub found
[ 1.726402] hub 5-0:1.0: 2 ports detected
[ 1.726600] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.759311] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.759328] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.759499] mice: PS/2 mouse device common for all mice
[ 1.759782] rtc_cmos 00:03: RTC can wake from S4
[ 1.759874] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.759923] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.760265] device-mapper: uevent: version 1.0.3
[ 1.760523] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.760726] device-mapper: multipath: version 1.1.0 loaded
[ 1.760735] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.761049] EISA: Probing bus 0 at eisa.0
[ 1.761062] Cannot allocate resource for EISA slot 1
[ 1.761068] Cannot allocate resource for EISA slot 2
[ 1.761073] Cannot allocate resource for EISA slot 3
[ 1.761077] Cannot allocate resource for EISA slot 4
[ 1.761082] Cannot allocate resource for EISA slot 5
[ 1.761102] EISA: Detected 0 cards.
[ 1.761489] cpuidle: using governor ladder
[ 1.761745] cpuidle: using governor menu
[ 1.762880] TCP cubic registered
[ 1.763239] NET: Registered protocol family 10
[ 1.764243] lo: Disabled Privacy Extensions
[ 1.764960] NET: Registered protocol family 17
[ 1.765006] Bluetooth: L2CAP ver 2.13
[ 1.765011] Bluetooth: L2CAP socket layer initialized
[ 1.765019] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.765025] Bluetooth: SCO socket layer initialized
[ 1.765119] Bluetooth: RFCOMM TTY layer initialized
[ 1.765129] Bluetooth: RFCOMM socket layer initialized
[ 1.765135] Bluetooth: RFCOMM ver 1.11
[ 1.766857] Using IPI No-Shortcut mode
[ 1.767053] PM: Resume from disk failed.
[ 1.767079] registered taskstats version 1
[ 1.767316] Magic number: 5:565:932
[ 1.767453] rtc_cmos 00:03: setting system clock to 2009-12-21 10:56:28 UTC (1261392988)
[ 1.767466] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.767469] EDD information not available.
[ 1.785835] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.001122] Clocksource tsc unstable (delta = -206755318 ns)
[ 2.020160] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.021634] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.036100] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.062978] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
[ 2.062994] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.065687] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.066170] ata1.00: configured for UDMA/133
[ 2.080440] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
[ 2.080756] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.080878] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.081031] sd 0:0:0:0: [sda] Write Protect is off
[ 2.081039] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.081110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.081456] sda: sda1 sda2 < sda5 sda6 >
[ 2.140883] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.205815] usb 1-2: configuration #1 chosen from 1 choice
[ 2.400146] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.416336] Freeing unused kernel memory: 540k freed
[ 2.416926] Write protecting the kernel text: 4568k
[ 2.417008] Write protecting the kernel read-only data: 1836k
[ 2.705492] Linux agpgart interface v0.103
[ 2.776373] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 2.776693] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 2.779581] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 2.852279] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 2.852912] acpi device:1a: registered as cooling_device3
[ 2.853440] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input6
[ 2.853553] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 2.926699] [drm] Initialized drm 1.1.0 20060810
[ 2.980838] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.980851] i915 0000:00:02.0: setting latency timer to 64
[ 3.212117] [drm] fb0: inteldrmfb frame buffer device
[ 3.212135] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.538588] [drm] LVDS-8: set mode 1024x600 e
[ 3.926935] Console: switching to colour frame buffer device 128x37
[ 4.440320] PM: Starting manual resume from disk
[ 4.440330] PM: Resume from partition 8:6
[ 4.440334] PM: Checking hibernation image.
[ 4.440764] PM: Resume from disk failed.
[ 4.472634] EXT4-fs (sda5): barriers enabled
[ 4.493006] kjournald2 starting: pid 360, dev sda5:8, commit interval 5 seconds
[ 4.493083] EXT4-fs (sda5): delayed allocation enabled
[ 4.493098] EXT4-fs: file extents enabled
[ 4.528247] EXT4-fs: mballoc enabled
[ 4.528281] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 5.207473] type=1505 audit(1261392991.937:2): operation="profile_load" pid=383 name=/usr/share/gdm/guest-session/Xsession
[ 5.214106] type=1505 audit(1261392991.944:3): operation="profile_load" pid=384 name=/sbin/dhclient3
[ 5.214689] type=1505 audit(1261392991.944:4): operation="profile_load" pid=384 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.215021] type=1505 audit(1261392991.944:5): operation="profile_load" pid=384 name=/usr/lib/connman/scripts/dhclient-script
[ 5.277223] type=1505 audit(1261392992.008:6): operation="profile_load" pid=385 name=/usr/bin/evince
[ 5.286466] type=1505 audit(1261392992.016:7): operation="profile_load" pid=385 name=/usr/bin/evince-previewer
[ 5.292187] type=1505 audit(1261392992.024:8): operation="profile_load" pid=385 name=/usr/bin/evince-thumbnailer
[ 5.317642] type=1505 audit(1261392992.048:9): operation="profile_load" pid=387 name=/usr/lib/cups/backend/cups-pdf
[ 5.318372] type=1505 audit(1261392992.048:10): operation="profile_load" pid=387 name=/usr/sbin/cupsd
[ 5.337371] type=1505 audit(1261392992.068:11): operation="profile_load" pid=388 name=/usr/sbin/tcpdump
[ 13.320091] udev: starting version 147
[ 13.325984] Adding 5253212k swap on /dev/sda6. Priority:-1 extents:1 across:5253212k
[ 13.387273] lp: driver loaded but no devices found
[ 13.508929] EXT4-fs (sda5): internal journal on sda5:8
[ 13.844454] intel_rng: FWH not detected
[ 14.111793] atl1c 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.111818] atl1c 0000:03:00.0: setting latency timer to 64
[ 14.111905] atl1c 0000:03:00.0: PME# disabled
[ 14.111920] atl1c 0000:03:00.0: PME# disabled
[ 14.156375] Linux video capture interface: v2.00
[ 14.203163] atl1c 0000:03:00.0: version 1.0.0.1-NAPI
[ 14.205483] cfg80211: Calling CRDA to update world regulatory domain
[ 14.216112] uvcvideo: Found UVC 1.00 device WebCam (0c45:62c0)
[ 14.232116] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 14.290586] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
[ 14.290751] usbcore: registered new interface driver uvcvideo
[ 14.290763] USB Video Class driver (v0.1.0)
[ 14.312401] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.312428] ath5k 0000:01:00.0: setting latency timer to 64
[ 14.312514] ath5k 0000:01:00.0: registered as 'phy0'
[ 14.372402] cfg80211: World regulatory domain updated:
[ 14.372412] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.372423] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.372433] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.372442] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.372451] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.372460] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.472124] acer-wmi: Unable to detect available WMID devices
[ 14.561509] ath: EEPROM regdomain: 0x65
[ 14.561518] ath: EEPROM indicates we should expect a direct regpair map
[ 14.561528] ath: Country alpha2 being used: 00
[ 14.561533] ath: Regpair used: 0x65
[ 14.678674] alloc irq_desc for 28 on node -1
[ 14.678684] alloc kstat_irqs on node -1
[ 14.678714] atl1c 0000:03:00.0: irq 28 for MSI/MSI-X
[ 14.679605] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.698313] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.802106] phy0: Selected rate control algorithm 'minstrel'
[ 14.804388] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 14.931366] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.105568] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.105644] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.270383] hda_codec: Unknown model for ALC272, trying auto-probe from BIOS...
[ 15.271378] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 15.442706] type=1505 audit(1261414602.172:12): operation="profile_replace" pid=908 name=/usr/share/gdm/guest-session/Xsession
[ 15.447559] type=1505 audit(1261414602.176:13): operation="profile_replace" pid=909 name=/sbin/dhclient3
[ 15.448477] type=1505 audit(1261414602.180:14): operation="profile_replace" pid=909 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 15.448968] type=1505 audit(1261414602.180:15): operation="profile_replace" pid=909 name=/usr/lib/connman/scripts/dhclient-script
[ 15.461180] type=1505 audit(1261414602.192:16): operation="profile_replace" pid=910 name=/usr/bin/evince
[ 15.475686] type=1505 audit(1261414602.204:17): operation="profile_replace" pid=910 name=/usr/bin/evince-previewer
[ 15.492889] type=1505 audit(1261414602.224:18): operation="profile_replace" pid=910 name=/usr/bin/evince-thumbnailer
[ 15.517693] type=1505 audit(1261414602.248:19): operation="profile_replace" pid=913 name=/usr/lib/cups/backend/cups-pdf
[ 15.518761] type=1505 audit(1261414602.248:20): operation="profile_replace" pid=913 name=/usr/sbin/cupsd
[ 15.525663] type=1505 audit(1261414602.256:21): operation="profile_replace" pid=914 name=/usr/sbin/tcpdump
[ 15.620873] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
[ 15.751025] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 16.970863] ppdev: user-space parallel port driver
[ 17.652185] CPU0 attaching NULL sched-domain.
[ 17.652200] CPU1 attaching NULL sched-domain.
[ 17.665186] CPU0 attaching sched-domain:
[ 17.665199] domain 0: span 0-1 level SIBLING
[ 17.665208] groups: 0 1
[ 17.665220] domain 1: span 0-1 level MC
[ 17.665227] groups: 0-1 (__cpu_power = 2048)
[ 17.665243] CPU1 attaching sched-domain:
[ 17.665250] domain 0: span 0-1 level SIBLING
[ 17.665257] groups: 1 0
[ 17.665270] domain 1: span 0-1 level MC
[ 17.665277] groups: 0-1 (__cpu_power = 2048)
[ 20.559878] CPU0 attaching NULL sched-domain.
[ 20.559891] CPU1 attaching NULL sched-domain.
[ 20.585141] CPU0 attaching sched-domain:
[ 20.585152] domain 0: span 0-1 level SIBLING
[ 20.585162] groups: 0 1
[ 20.585175] domain 1: span 0-1 level MC
[ 20.585183] groups: 0-1 (__cpu_power = 2048)
[ 20.585200] CPU1 attaching sched-domain:
[ 20.585207] domain 0: span 0-1 level SIBLING
[ 20.585215] groups: 1 0
[ 20.585227] domain 1: span 0-1 level MC
[ 20.585234] groups: 0-1 (__cpu_power = 2048)
[ 48.761018] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x014f000c
[ 49.665634] wlan0: authenticate with AP 00:23:69:ff:44:dd
[ 49.667167] wlan0: authenticated
[ 49.667180] wlan0: associate with AP 00:23:69:ff:44:dd
[ 49.669467] wlan0: RX AssocResp from 00:23:69:ff:44:dd (capab=0x411 status=0 aid=1)
[ 49.669478] wlan0: associated
[ 49.671288] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 49.699371] padlock: VIA PadLock not detected.
[ 60.356119] wlan0: no IPv6 routers present
[ 4236.609425] CPU0 attaching NULL sched-domain.
[ 4236.609441] CPU1 attaching NULL sched-domain.
[ 4236.624218] CPU0 attaching sched-domain:
[ 4236.624229] domain 0: span 0-1 level SIBLING
[ 4236.624238] groups: 0 1
[ 4236.624252] CPU1 attaching sched-domain:
[ 4236.624258] domain 0: span 0-1 level SIBLING
[ 4236.624266] groups: 1 0
[ 4238.994418] CPU0 attaching NULL sched-domain.
[ 4238.994431] CPU1 attaching NULL sched-domain.
[ 4239.009117] CPU0 attaching sched-domain:
[ 4239.009127] domain 0: span 0-1 level SIBLING
[ 4239.009133] groups: 0 1
[ 4239.009145] CPU1 attaching sched-domain:
[ 4239.009150] domain 0: span 0-1 level SIBLING
[ 4239.009155] groups: 1 0
[ 4239.895340] wlan0: deauthenticating by local choice (reason=3)
[ 4240.002128] wlan0: disassociating by local choice (reason=3)
[ 4245.725619] PM: Syncing filesystems ... done.
[ 4245.731577] PM: Preparing system for mem sleep
[ 4245.731587] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 4245.733183] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 4245.733365] PM: Entering mem sleep
[ 4245.733389] Suspending console(s) (use no_console_suspend to debug)
[ 4245.776154] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4245.776559] sd 0:0:0:0: [sda] Stopping disk
[ 4247.304887] atl1c 0000:03:00.0: PME# disabled
[ 4247.304901] atl1c 0000:03:00.0: PCI INT A disabled
[ 4247.320244] ath5k 0000:01:00.0: PCI INT A disabled
[ 4247.384339] ata6: port disabled. ignoring.
[ 4247.384475] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 4247.384493] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 4247.384506] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 4247.384517] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 4247.384529] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 4247.384540] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 4247.488576] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 4247.523717] i915 0000:00:02.0: PCI INT A disabled
[ 4247.536431] PM: suspend devices took 1.804 seconds
[ 4247.536710] ehci_hcd 0000:00:1d.7: PME# disabled
[ 4247.552465] ACPI: Preparing to enter system sleep state S3
[ 4247.552882] Disabling non-boot CPUs ...
[ 4247.656034] CPU 1 is now offline
[ 4247.656040] SMP alternatives: switching to UP code
[ 4247.661384] CPU0 attaching NULL sched-domain.
[ 4247.661391] CPU1 attaching NULL sched-domain.
[ 4247.661407] CPU0 attaching NULL sched-domain.
[ 4247.661919] CPU1 is down
[ 4247.661939] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 4247.661939] Back to C!
[ 4247.661939] CPU0: Thermal LVT vector (0xfa) already installed
[ 4247.661939] Enabling non-boot CPUs ...
[ 4247.661939] SMP alternatives: switching to SMP code
[ 4247.667511] Booting processor 1 APIC 0x1 ip 0x6000
[ 4247.661160] Initializing CPU#1
[ 4247.661160] Calibrating delay using timer specific routine.. 3192.02 BogoMIPS (lpj=6384046)
[ 4247.661160] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 4247.661160] CPU: L2 cache: 512K
[ 4247.661160] CPU: Physical Processor ID: 0
[ 4247.661160] CPU: Processor Core ID: 0
[ 4247.661160] mce: CPU supports 5 MCE banks
[ 4247.661160] CPU1: Thermal monitoring enabled (TM2)
[ 4247.661160] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 4247.756975] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 4247.757089] CPU0 attaching NULL sched-domain.
[ 4247.761020] Switched to high resolution mode on CPU 1
[ 4247.772038] CPU0 attaching sched-domain:
[ 4247.772047] domain 0: span 0-1 level SIBLING
[ 4247.772054] groups: 0 1
[ 4247.772065] CPU1 attaching sched-domain:
[ 4247.772072] domain 0: span 0-1 level SIBLING
[ 4247.772078] groups: 1 0
[ 4247.776044] CPU1 is up
[ 4247.776051] ACPI: Waking up from system sleep state S3
[ 4247.779625] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x96340004)
[ 4247.779642] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 4247.779713] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4247.779793] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
[ 4247.779815] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4247.779903] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 4247.779980] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 4247.780071] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 4247.780118] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 4247.780164] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 4247.780220] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 4247.780248] ehci_hcd 0000:00:1d.7: PME# disabled
[ 4247.780267] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[ 4247.780286] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[ 4247.780435] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x96340000, writing 0x96344000)
[ 4247.780459] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 4247.780598] ath5k 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[ 4249.327401] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4249.327411] i915 0000:00:02.0: setting latency timer to 64
[ 4249.388728] [drm] LVDS-8: set mode 1024x600 e
[ 4249.408837] pci 0000:00:02.1: PME# disabled
[ 4249.408853] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4249.408864] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4249.408907] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4249.408917] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4249.408948] usb usb2: root hub lost power or was reset
[ 4249.408975] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4249.408985] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4249.409013] usb usb3: root hub lost power or was reset
[ 4249.409044] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4249.409058] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4249.409093] usb usb4: root hub lost power or was reset
[ 4249.409120] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4249.409130] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4249.409158] usb usb5: root hub lost power or was reset
[ 4249.409183] ehci_hcd 0000:00:1d.7: PME# disabled
[ 4249.409191] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4249.409201] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4249.409249] pci 0000:00:1e.0: setting latency timer to 64
[ 4249.409266] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4249.409275] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4249.409343] ata6: port disabled. ignoring.
[ 4249.409368] ahci 0000:00:1f.2: setting latency timer to 64
[ 4249.409435] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4249.409452] atl1c 0000:03:00.0: PME# disabled
[ 4249.409461] atl1c 0000:03:00.0: PME# disabled
[ 4249.622038] sd 0:0:0:0: [sda] Starting disk
[ 4249.729173] ata3: SATA link down (SStatus 0 SControl 300)
[ 4252.416145] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4252.418466] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4252.421624] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 4252.422113] ata1.00: configured for UDMA/133
[ 4252.572145] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[ 4252.753820] PM: resume devices took 4.972 seconds
[ 4252.753878] PM: Finishing wakeup.
[ 4252.753882] Restarting tasks ... done.
[ 4252.954281] atl1c 0000:03:00.0: irq 28 for MSI/MSI-X
[ 4252.954998] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4252.996760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4253.384653] CPU0 attaching NULL sched-domain.
[ 4253.384665] CPU1 attaching NULL sched-domain.
[ 4253.397739] CPU0 attaching sched-domain:
[ 4253.397749] domain 0: span 0-1 level SIBLING
[ 4253.397757] groups: 0 1
[ 4253.397770] CPU1 attaching sched-domain:
[ 4253.397776] domain 0: span 0-1 level SIBLING
[ 4253.397783] groups: 1 0
[ 4275.978664] wlan0: authenticate with AP 00:23:69:ff:44:dd
[ 4275.984681] wlan0: authenticated
[ 4275.984693] wlan0: associate with AP 00:23:69:ff:44:dd
[ 4275.987191] wlan0: RX AssocResp from 00:23:69:ff:44:dd (capab=0x411 status=0 aid=1)
[ 4275.987203] wlan0: associated
[ 4275.990384] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4286.478993] wlan0: no IPv6 routers present
And here is a lspci output:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
If there is a command you need please ask, this has gotten very annoying. Thank you all.
|