LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 05-15-2015, 09:05 AM   #1
xpdin
LQ Newbie
 
Registered: May 2015
Posts: 12

Rep: Reputation: Disabled
how can I activate my wireless?


Re: Install Ethernet, Intel 4965AGN 802.11abgn

Postby xpdin on Fri May 15, 2015 6:53 am
Hi,

I can't set my wireless anymore like before with the next command,

Code: Select all
sudo apt-get install bcmwl-kernel-source



Can someone help me please?

The new log for

Code: Select all
inxi -Fxz

is:

xpd@Multix ~ $ inxi -Fxz
System: Host: Multix Kernel: 3.13.0-37-generic i686 (32 bit, gcc: 4.8.2)
Desktop: Xfce 4.11.6 (Gtk 2.24.23) Distro: Linux Mint 17.1 Rebecca
Machine: System: Hewlett-Packard (portable) product: N/A version: F.09
Mobo: Hewlett-Packard model: 30D7 version: KBC Version 83.12
Bios: Hewlett-Packard version: 68MDD Ver. F.09 date: 01/11/2008
CPU: Dual core Intel Pentium Dual CPU T2390 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 ssse3) bmips: 7447.96
Clock Speeds: 1: 800.00 MHz 2: 1600.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] RV516/M62-S [Mobility Radeon X1350] bus-ID: 01:00.0
X.Org: 1.15.1 drivers: ati,radeon FAILED: fbdev,vesa Resolution: 1152x864@60.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 2.1 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network: Card-1: Broadcom BCM4311 802.11a/b/g driver: b43-pci-bridge bus-ID: 10:00.0
IF: N/A state: N/A mac: N/A
Card-2: Intel 82562GT 10/100 Network Connection driver: e1000e ver: 2.3.2-k port: 5000 bus-ID: 00:19.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 250.1GB (1.7% used) 1: id: /dev/sda model: Hitachi_HTS54252 size: 250.1GB
Partition: ID: / size: 49G used: 4.1G (9%) fs: ext2 ID: swap-1 size: 40.00GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 48.0C mobo: 27.9C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 141 Uptime: 2 min Memory: 191.2/2015.6MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4
xpd@Multix ~ $


Thank you very much.
 
Old 05-15-2015, 10:33 AM   #2
xpdin
LQ Newbie
 
Registered: May 2015
Posts: 12

Original Poster
Rep: Reputation: Disabled
Maybe this will help you more please?

xpd@Multix ~ $ sudo apt-get install bcmwl-kernel-source
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libc-dev-bin libc6 libc6-dev
Suggested packages:
glibc-doc
The following NEW packages will be installed:
bcmwl-kernel-source libc-dev-bin libc6-dev
The following packages will be upgraded:
libc6
1 upgraded, 3 newly installed, 0 to remove and 375 not upgraded.
Need to get 7,096 kB of archives.
After this operation, 16.4 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err http://archive.ubuntu.com/ubuntu/ trusty-updates/main libc6 i386 2.19-0ubuntu6.6
Could not resolve 'archive.ubuntu.com'
Err http://archive.ubuntu.com/ubuntu/ trusty-updates/restricted bcmwl-kernel-source i386 6.30.223.248+bdcom-0ubuntu0.1
Could not resolve 'archive.ubuntu.com'
Err http://security.ubuntu.com/ubuntu/ trusty-security/main libc6 i386 2.19-0ubuntu6.6
Could not resolve 'security.ubuntu.com'
Err http://security.ubuntu.com/ubuntu/ trusty-security/main libc-dev-bin i386 2.19-0ubuntu6.6
Could not resolve 'security.ubuntu.com'
Err http://security.ubuntu.com/ubuntu/ trusty-security/main libc6-dev i386 2.19-0ubuntu6.6
Could not resolve 'security.ubuntu.com'
E: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu6.6_i386.deb Could not resolve 'security.ubuntu.com'

E: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu6.6_i386.deb Could not resolve 'security.ubuntu.com'

E: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu6.6_i386.deb Could not resolve 'security.ubuntu.com'

E: Failed to fetch http://archive.ubuntu.com/ubuntu/poo...tu0.1_i386.deb Could not resolve 'archive.ubuntu.com'

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
xpd@Multix ~ $


____________________________________________________________________________________________________ _______


xpd@Multix ~ $ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1f:29:8c:c4:d3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:22 Memory:dc500000-dc520000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:199 errors:0 dropped:0 overruns:0 frame:0
TX packets:199 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:14847 (14.8 KB) TX bytes:14847 (14.8 KB)


____________________________________________________________________


xpd@Multix ~ $ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.



______________________________________________________


xpd@Multix ~ $ ifconfig wlan0 up
wlan0: ERROR while getting interface flags: No such device
xpd@Multix ~ $ ifconfig wlan1 up
wlan1: ERROR while getting interface flags: No such device
xpd@Multix ~ $ ifconfig wlan1
wlan1: error fetching interface information: Device not found
xpd@Multix ~ $ lsmod
Module Size Used by
rfcomm 53664 8
bnep 18895 2
hp_wmi 13702 0
sparse_keymap 13708 1 hp_wmi
snd_hda_codec_analog 14537 1
snd_hda_intel 42730 3
snd_hda_codec 164067 2 snd_hda_intel,snd_hda_codec_analog
snd_hwdep 13272 1 snd_hda_codec
snd_pcm 85501 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
snd_seq_midi 13132 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_rawmidi 25135 1 snd_seq_midi
snd_seq 55383 2 snd_seq_midi_event,snd_seq_midi
binfmt_misc 13140 1
dm_multipath 22402 0
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
b43 356470 0
btusb 27580 0
snd_timer 28584 2 snd_pcm,snd_seq
scsi_dh 14458 1 dm_multipath
bluetooth 342208 22 bnep,btusb,rfcomm
coretemp 13195 0
bcma 42043 1 b43
mac80211 546051 1 b43
snd 60939 16 snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_c odec_analog,snd_seq_midi
joydev 17101 0
cfg80211 409394 2 b43,mac80211
serio_raw 13230 0
ssb_hcd 12749 0
lpc_ich 16864 0
soundcore 12600 1 snd
parport_pc 31981 0
ppdev 17391 0
lp 13299 0
parport 40836 3 lp,ppdev,parport_pc
mac_hid 13037 0
dm_mirror 21756 0
dm_region_hash 20121 1 dm_mirror
dm_log 18072 2 dm_region_hash,dm_mirror
hid_generic 12492 0
usbhid 47070 0
hid 87604 2 hid_generic,usbhid
radeon 1420614 3
i2c_algo_bit 13197 1 radeon
ttm 72725 1 radeon
drm_kms_helper 48868 1 radeon
drm 244037 5 ttm,drm_kms_helper,radeon
psmouse 91329 0
ssb 51854 2 b43,ssb_hcd
wmi 18673 1 hp_wmi
e1000e 223034 0
video 18903 0
ptp 18445 1 e1000e
pps_core 18799 1 ptp





Kind regards,
 
Old 05-15-2015, 11:12 AM   #3
beachboy2
Senior Member
 
Registered: Jan 2007
Location: Wild West Wales, UK
Distribution: Ubuntu MATE, Mint MATE & antiX MX-15
Posts: 1,664
Blog Entries: 5

Rep: Reputation: 562Reputation: 562Reputation: 562Reputation: 562Reputation: 562Reputation: 562
xpdin,

Welcome to LQ.

There is an excellent "sticky" about Broadcom wifi cards here:

http://www.linuxquestions.org/questi...ux-4175434970/

Look for Broadcom BCM4311.

Last edited by beachboy2; 05-15-2015 at 11:14 AM.
 
Old 05-16-2015, 09:54 AM   #4
xpdin
LQ Newbie
 
Registered: May 2015
Posts: 12

Original Poster
Rep: Reputation: Disabled
Thank you very much beachboy2, but I couldn't do it.

Some more logs, if someone still help me please,

xpdMultix ~ $ lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
Kernel driver in use: pcieport
00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100 Network Connection [8086:10c4] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV516/M62-S [Mobility Radeon X1350] [1002:7196]
Subsystem: Hewlett-Packard Company Device [103c:30d7]
Kernel driver in use: radeon
10:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11a/b/g [14e4:4312] (rev 02)
Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1371]
Kernel driver in use: b43-pci-bridge




__________________________________________




xpdMultix ~ $ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub



__________________________



xpdMultix ~ $ lsmod
Module Size Used by
hid_generic 12492 0
usbhid 47070 0
hid 87604 2 hid_generic,usbhid
bnep 18895 2
rfcomm 53664 8
hp_wmi 13702 0
sparse_keymap 13708 1 hp_wmi
snd_hda_codec_analog 14537 1
snd_hda_intel 42730 5
snd_hda_codec 164067 2 snd_hda_intel,snd_hda_codec_analog
snd_hwdep 13272 1 snd_hda_codec
snd_pcm 85501 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
snd_seq_midi 13132 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_rawmidi 25135 1 snd_seq_midi
snd_seq 55383 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
b43 356470 0
dm_multipath 22402 0
snd_timer 28584 2 snd_pcm,snd_seq
binfmt_misc 13140 1
btusb 27580 0
bcma 42043 1 b43
scsi_dh 14458 1 dm_multipath
bluetooth 342208 22 bnep,btusb,rfcomm
coretemp 13195 0
snd 60939 19 snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,sn d_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_c odec_analog,snd_seq_midi
mac80211 546051 1 b43
joydev 17101 0
serio_raw 13230 0
cfg80211 409394 2 b43,mac80211
lpc_ich 16864 0
ssb_hcd 12749 0
soundcore 12600 1 snd
parport_pc 31981 0
ppdev 17391 0
mac_hid 13037 0
lp 13299 0
parport 40836 3 lp,ppdev,parport_pc
dm_mirror 21756 0
dm_region_hash 20121 1 dm_mirror
dm_log 18072 2 dm_region_hash,dm_mirror
radeon 1420614 4
i2c_algo_bit 13197 1 radeon
ssb 51854 2 b43,ssb_hcd
ttm 72725 1 radeon
psmouse 91329 0
wmi 18673 1 hp_wmi
drm_kms_helper 48868 1 radeon
video 18903 0
e1000e 223034 0
drm 244037 6 ttm,drm_kms_helper,radeon
ptp 18445 1 e1000e
pps_core 18799 1 ptp





________________________

dmesg

[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffb0000-0x000000007ffc53ff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffc5400-0x000000007ffe7fb7] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffe7fb8-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed99fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard /30D7, BIOS 68MDD Ver. F.09 01/11/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ffb0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 4175488KB, range: 128KB, type UC
[ 0.000000] total RAM covered: 2048M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 1 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b93000, 0x01b93fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34b00000-0x36577fff]
[ 0.000000] ACPI: RSDP 000fc600 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 7ffc81c8 00007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 7ffc8084 0000F4 (v04 HP 30D7 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 7ffc84cc 0127A3 (v01 HP nc6xxxs 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 7ffe7d80 000040
[ 0.000000] ACPI: SLIC 7ffc8244 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 7ffc83bc 000038 (v01 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 7ffc83f4 000068 (v01 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 7ffc845c 00003C (v01 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 7ffc8498 000032 (v02 HP 30D7 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 7ffdac6f 00032A (v01 HP HPQPAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 7ffdaf99 00017D (v01 HP HPQMRM 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 7ffdbadc 00025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7ffdbd3b 0000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 7ffdbde1 0004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b94000, 0x01b94fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7ffaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffaffff]
[ 0.000000] On node 0 totalpages: 524110
[ 0.000000] free_area_init_node: node 0, pgdat c199b440, node_mem_map f6bfe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved

[ 0.223905] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.223910] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224805] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.224810] system 00:09: [io 0x1000-0x107f] could not be reserved
[ 0.224813] system 00:09: [io 0x1100-0x113f] has been reserved
[ 0.224817] system 00:09: [io 0x1200-0x121f] has been reserved
[ 0.224820] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.224828] system 00:09: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.224831] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.224835] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.224839] system 00:09: [mem 0xfed90000-0xfed99fff] has been reserved
[ 0.224843] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225901] system 00:0a: [mem 0x000cf800-0x000cffff] has been reserved
[ 0.225905] system 00:0a: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.225909] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.225914] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225940] pnp: PnP ACPI: found 11 devices
[ 0.225942] ACPI: bus type PNP unregistered
[ 0.225947] PnPBIOS: Disabled by ACPI PNP
[ 0.263589] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000
[ 0.263595] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
[ 0.263609] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000
[ 0.263627] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.263632] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.263635] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.263639] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.263646] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.263650] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.263655] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.263660] pci 0000:01:00.0: BAR 6: assigned [mem 0xdc420000-0xdc43ffff pref]
[ 0.263665] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.263669] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.263674] pci 0000:00:01.0: bridge window [mem 0xdc400000-0xdc4fffff]
[ 0.263679] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.263685] pci 0000:00:1c.0: PCI bridge to [bus 08]
[ 0.263703] pci 0000:00:1c.1: PCI bridge to [bus 10]
[ 0.263708] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.263715] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.263722] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.263731] pci 0000:00:1c.4: PCI bridge to [bus 28]
[ 0.263736] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 0.263743] pci 0000:00:1c.4: bridge window [mem 0xd8000000-0xdbffffff]
[ 0.263750] pci 0000:00:1c.4: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.263759] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.263778] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.263781] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.263784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.263787] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfedfffff]
[ 0.263790] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.263793] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
[ 0.263796] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.263799] pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
[ 0.263802] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.263805] pci_bus 0000:10: resource 0 [io 0x6000-0x6fff]
[ 0.263808] pci_bus 0000:10: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 0.263811] pci_bus 0000:10: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.263814] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
[ 0.263816] pci_bus 0000:28: resource 1 [mem 0xd8000000-0xdbffffff]
[ 0.263819] pci_bus 0000:28: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.263822] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.263825] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.263828] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.263831] pci_bus 0000:02: resource 7 [mem 0x80000000-0xfedfffff]
[ 0.263833] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
[ 0.263836] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
[ 0.263889] NET: Registered protocol family 2
[ 0.264166] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.264187] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.264220] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.264254] TCP: reno registered
[ 0.264257] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264269] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264346] NET: Registered protocol family 1
[ 0.267446] pci 0000:01:00.0: Boot video device
[ 0.267457] PCI: CLS 64 bytes, default 64
[ 0.267526] Trying to unpack rootfs image as initramfs...
[ 0.965252] Freeing initrd memory: 27104K (f4b00000 - f6578000)
[ 0.965584] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[ 0.965595] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[ 0.965705] microcode: Microcode Update Driver: v2.00 <tigranaivazian.fsnet.co.uk>, Peter Oruba
[ 0.965708] Scanning for low memory corruption every 60 seconds
[ 0.966042] Initialise system trusted keyring
[ 0.966104] audit: initializing netlink socket (disabled)
[ 0.966125] type=2000 audit(1431731667.964:1): initialized
[ 0.995478] bounce pool size: 64 pages
[ 0.995493] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.997348] zbud: loaded
[URES) filtered out
[ 79.548249] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 79.548252] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 79.548506] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 79.552425] ata2.00: ACPI cmd ef/03:01:00:00:00:a0 (SET FEATURES) filtered out
[ 79.552428] ata2.00: ACPI cmd ef/03:20:00:00:00:a0 (SET FEATURES) filtered out
[ 79.572243] ata1.00: configured for UDMA/100
[ 79.572456] sd 0:0:0:0: [sda] Starting disk
[ 79.572563] ata2.00: configured for MWDMA2
[ 79.824074] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[ 81.604449] PM: restore of devices complete after 2224.747 msecs
[ 81.605185] PM: Image restored successfully.
[ 81.605201] PM: Basic memory bitmaps freed
[ 81.605503] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.605511] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 81.605203] Restarting tasks ... done.
[ 81.609207] video LNXVIDEO:00: Restoring backlight state
[ 81.617073] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.617082] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 81.617766] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.617772] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 81.618349] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.618355] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 81.625346] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.625358] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 81.626030] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.626037] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 81.627322] ACPI: Error installing CMOS-RTC region handler
[ 81.627559] lpc_ich 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 81.627565] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 82.076143] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 82.180127] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 82.180266] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 83.632889] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 83.632905] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 83.632991] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 124.620130] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 124.795141] usb 5-2: New USB device found, idVendor=15d9, idProduct=0a4c
[ 124.795151] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 124.795160] usb 5-2: Product: USB OPTICAL MOUSE
[ 124.998716] hidraw: raw HID events driver (C) Jiri Kosina
[ 125.036873] usbcore: registered new interface driver usbhid
[ 125.036878] usbhid: USB HID core driver
[ 125.057873] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input23
[ 125.058272] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-2/input0
[ 277.824489] perf samples too long (2543 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 410.494930] perf samples too long (5135 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 4382.598834] perf samples too long (10164 > 10000), lowering kernel.perf_event_max_sample_rate to 12500




____________________________




xpdMultix ~ $ dmesg | grep firmware
[ 25.064246] b43 ssb0:0: Direct firmware load failed with error -2
[ 25.544327] b43 ssb0:0: Direct firmware load failed with error -2
[ 25.827722] b43 ssb0:0: Direct firmware load failed with error -2
[ 25.833301] b43 ssb0:0: Direct firmware load failed with error -2
[ 25.838438] b43-phy0 ERROR: You must go to htp://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.





_______________________________________________




xpdMultix ~ $ uname -r
3.13.0-37-generic



______________________________________


xpdultix ~ $ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1f:29:8c:c4:d3
inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21f:29ff:fe8c:c4d3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:70315 errors:0 dropped:0 overruns:0 frame:0
TX packets:56209 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:77564296 (77.5 MB) TX bytes:8206524 (8.2 MB)
Interrupt:22 Memory:dc500000-dc520000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3342 errors:0 dropped:0 overruns:0 frame:0
TX packets:3342 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:347238 (347.2 KB) TX bytes:347238 (347.2 KB)
 
Old 05-16-2015, 10:49 AM   #5
TB0ne
LQ Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 17,945

Rep: Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693Reputation: 3693
Quote:
Originally Posted by xpdin View Post
Thank you very much beachboy2, but I couldn't do it.
Some more logs, if someone still help me please,
Just saying "I couldn't do it", tells us NOTHING...and posting all that data (instead of just the relevant parts about your hardware) doesn't tell us anything either. Not posting it in CODE blocks (and making it less readable), doesn't make anyone want to try to shovel through it all.

Again that thread beachboy posted has much on how to get your card working. You don't tell us what version/distro of Linux you're using. Based on what you posted, it's hard to tell if it's Debian or Ubuntu.
 
Old 05-16-2015, 12:46 PM   #6
xpdin
LQ Newbie
 
Registered: May 2015
Posts: 12

Original Poster
Rep: Reputation: Disabled
Many appreciations to all,

It worked like that:


Code:
sudo apt-get purge bcmwl-kernel-source

Code:
sudo apt-get update
Code:
sudo apt-get install firmware-b43-installer
Then reboot

Excuse me for my unjustified and childish insistences
Warm regards,
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
I can't activate (i'mean activate) my wireless card Mardrus Linux - Newbie 5 05-04-2008 07:35 AM
How Do I Activate Wireless NIC? jimbo-62 Slackware 7 10-11-2007 08:47 PM
I can't connect to my wireless AP in FC5, why am I unable to activate my wireless. ruggersway Linux - Wireless Networking 1 05-09-2006 04:58 PM
How to Activate Wireless? jimbo-62 Debian 11 04-05-2006 02:33 PM
How to activate wireless on laptop? joA Slackware 7 11-25-2005 12:42 AM


All times are GMT -5. The time now is 07:35 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration