akuthia |
07-30-2011 12:08 PM |
Anyways here are the results from the script
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid ce9a1ece-1af2-496b-bca4-f12afdb12fb2 root
set
prefix=($root)/boot/grub---------------------------------------------------
-----------------------------.
=> Windows is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1
and looks at sector 54192544 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub on this drive. No errors found
in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders, total 781422768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 40,962,048 61,442,047 20,480,000 83 Linux
/dev/sda3 61,442,048 122,882,047 61,440,000 82 Linux swap / Solaris
/dev/sda4 122,895,358 532,435,679 409,540,322 f W95 Extended (LBA)
/dev/sda5 122,895,360 429,755,759 306,860,400 7 NTFS / exFAT / HPFS
/dev/sda6 429,755,823 532,435,679 102,679,857 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders, total 781422768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 307,202,047 307,200,000 7 NTFS / exFAT / HPFS
/dev/sdb2 307,204,094 781,422,591 474,218,498 5 Extended
/dev/sdb5 307,204,096 764,651,519 457,447,424 83 Linux
/dev/sdb6 764,653,568 781,422,591 16,769,024 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 2C5C118E5C115444 ntfs System Reserved
/dev/sda2 8ea33eeb-10d2-45c3-a925-5ca27b62ac33 ext4
/dev/sda3 c8fbfb11-a202-451a-8021-acec1ae99abc swap
/dev/sda5 E426CF0226CED4A8 ntfs New Volume
/dev/sda6 E2F041C2F0419DA3 ntfs Windows
/dev/sdb1 D4D475CBD475B07A ntfs Programs
/dev/sdb5 ce9a1ece-1af2-496b-bca4-f12afdb12fb2 ext4
/dev/sdb6 42e4b2a2-6401-43ce-8116-66253883bad0 swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sr0 /media/UDF Volume udf (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,umask=0077,dmode=0500)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=8ea33eeb-10d2-45c3-a925-5ca27b62ac33 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=8ea33eeb-10d2-45c3-a925-5ca27b62ac33 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 2C5C118E5C115444
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sdb5)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=ce9a1ece-1af2-496b-bca4-f12afdb12fb2 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sdb5)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=ce9a1ece-1af2-496b-bca4-f12afdb12fb2 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=8ea33eeb-10d2-45c3-a925-5ca27b62ac33 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda3 during installation
UUID=c8fbfb11-a202-451a-8021-acec1ae99abc none swap sw 0 0
# swap was on /dev/sdb6 during installation
UUID=42e4b2a2-6401-43ce-8116-66253883bad0 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
25.841045380 = 27.746611200 boot/grub/core.img 1
25.819492340 = 27.723468800 boot/grub/grub.cfg 1
20.414039612 = 21.919408128 boot/initrd.img-2.6.38-8-generic 2
25.837833405 = 27.743162368 boot/vmlinuz-2.6.38-8-generic 1
20.414039612 = 21.919408128 initrd.img 2
25.837833405 = 27.743162368 vmlinuz 1
=========================== sdb5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=ce9a1ece-1af2-496b-bca4-f12afdb12fb2 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=ce9a1ece-1af2-496b-bca4-f12afdb12fb2 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos5)'
search --no-floppy --fs-uuid --set=root ce9a1ece-1af2-496b-bca4-f12afdb12fb2
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 2C5C118E5C115444
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sda2)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=8ea33eeb-10d2-45c3-a925-5ca27b62ac33 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 8ea33eeb-10d2-45c3-a925-5ca27b62ac33
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=8ea33eeb-10d2-45c3-a925-5ca27b62ac33 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb5 during installation
UUID=ce9a1ece-1af2-496b-bca4-f12afdb12fb2 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb6 during installation
UUID=42e4b2a2-6401-43ce-8116-66253883bad0 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
350.662673950 = 376.521179136 boot/grub/core.img 1
158.718921661 = 170.423144448 boot/grub/grub.cfg 1
147.041015625 = 157.884088320 boot/initrd.img-2.6.38-8-generic 2
350.660942078 = 376.519319552 boot/vmlinuz-2.6.38-8-generic 1
147.041015625 = 157.884088320 initrd.img 2
350.660942078 = 376.519319552 vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda4
00000000 c2 33 ff dd 9e e8 8e 87 f7 e4 ef c9 3d f9 fe 8f |.3..........=...|
00000010 bd 27 e3 f8 50 9c e7 8a f3 ce 1d c1 f9 6f 52 5c |.'..P........oR\|
00000020 ff 25 fd f9 3f 29 ce bf 19 7d ff 1f dd 13 9c ff |.%..?)...}......|
00000030 a8 7d c1 e1 1f dc 17 9c ff 13 fd fb d7 bf af 76 |.}.............v|
00000040 fa be e0 5c e8 df 7f ca 7d f9 fe ef bd ff 7e 38 |...\....}.....~8|
00000050 df 38 26 c4 77 f3 df 8a f4 fe 27 bf c6 af bf fa |.8&.w.....'.....|
00000060 f5 fe 80 5f f7 e5 af c3 3e ec 9f a4 63 fa 03 ee |..._....>...c...|
00000070 a8 4e d0 9f 7f d1 1d d1 31 ff 90 fe fc 8f ee 88 |.N......1.......|
00000080 ce ff 35 be a5 3e c9 b7 44 c7 fc 9e df 12 9d f3 |..5..>..D.......|
00000090 07 d0 cf df ec 53 19 f3 e2 53 c1 fd 97 ea df bf |.....S...S......|
000000a0 e2 53 19 53 f2 40 fe fe 27 1f 08 2d 7e ff 03 19 |.S.S.@..'..-~...|
000000b0 f3 9f 76 20 7f ff 19 0f 85 16 7f d5 43 91 fd 7f |..v ........C...|
000000c0 5d ff fe df 1e 8a 0c ff 7a 8f 44 e6 7f db 47 a2 |].......z.D...G.|
000000d0 03 7e 77 fd fb cd 23 f9 fe 0f 7a 24 ed ff da 47 |.~w...#...z$...G|
000000e0 02 ef 5f 7e f4 7e 36 22 96 f3 f8 a7 0c 9f 7e 4b |.._~.~6"......~K|
000000f0 e6 fc 2f fa 96 cc f5 3f f4 2d a5 cb b7 d4 3f f8 |../....?.-....?.|
00000100 84 c6 7f 28 fd 9d 1e ca f8 7f d1 a1 8c fb 0f 3c |...(...........<|
00000110 14 7c fe d4 43 19 ef 5f 7c 28 78 fe db da fe d6 |.|..C.._|(x.....|
00000120 f8 fd 0e bf 1e e5 44 7e 23 e4 44 56 c8 51 00 bf |......D~#.DV.Q..|
00000130 ff 49 f1 4b 3f 51 9b f1 89 e0 f7 07 7c a2 36 e3 |.I.K?Q......|.6.|
00000140 13 b5 19 f4 f3 7f d2 fe be f5 58 f0 fb c9 c7 82 |..........X.....|
00000150 df ec b1 e0 f7 ee b1 e0 f7 47 3c 16 fc fe 9e c7 |.........G<.....|
00000160 8a 5f 37 76 66 9f fd 37 82 af cd 34 fa f6 2f d3 |._7vf..7...4../.|
00000170 35 1e ea e3 0f fa 4c de f9 73 3e 53 fe f5 e3 ef |5.....L..s>S....|
00000180 3f a4 13 53 74 73 9a e6 67 34 de f7 73 7b bf be |?..Sts..g4..s{..|
00000190 fc 8e b5 f6 79 37 36 e8 ac f7 6f ea af 9b 1f 1d |....y76...o.....|
000001a0 58 1b 4d cf 7e d3 5f e3 2e fd ff 0f fb 0f bd 58 |X.M.~._........X|
000001b0 dd fb cc c0 f3 73 2b 2b a2 c9 6f ff 1b 4b 00 ef |.....s++..o..K..|
000001c0 ff ff 07 ef ff ff 02 00 00 00 70 51 4a 12 00 ef |..........pQJ...|
000001d0 ff ff 05 ef ff ff 72 51 4a 12 70 c5 1e 06 00 00 |......rQJ.p.....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
unlzma: Decoder error
unlzma: Decoder error
As i said earlier, sda6 is where windows is actually installed. sda1 is where the windows bootloader started, and where i put grub2 when i installed linux.
|