LinuxQuestions.org - gNewSense no Internet connection

Hi guys, I'm having a problem connecting to the Internet on my gNewSense installation. My Internet works fine through Ubuntu and Windows, but not through gNewSense, is there anyway of fixing this? Also, while searching around I found that somebody said I ought to type "dmesg" and copy the results. Maybe that will help? Thanks in advance.
Code:
[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.24-24-generic (root@sandbox) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Sep 10 19:00:20 UTC 2009 (Ubuntu 2.6.24-24.59gnewsense9-generic)

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)

[    0.000000]  BIOS-e820: 000000001f7f0000 - 0000000020000000 (reserved)

[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

[    0.000000] 0MB HIGHMEM available.

[    0.000000] 503MB LOWMEM available.

[    0.000000] found SMP MP-table at 000faa60

[    0.000000] Entering add_active_range(0, 0, 129008) 0 entries of 256 used

[    0.000000] Zone PFN ranges:

[    0.000000]  DMA            0 ->    4096

[    0.000000]  Normal      4096 ->  129008

[    0.000000]  HighMem    129008 ->  129008

[    0.000000] Movable zone start PFN for each node

[    0.000000] early_node_map[1] active PFN ranges

[    0.000000]    0:        0 ->  129008

[    0.000000] On node 0 totalpages: 129008

[    0.000000]  DMA zone: 32 pages used for memmap

[    0.000000]  DMA zone: 0 pages reserved

[    0.000000]  DMA zone: 4064 pages, LIFO batch:0

[    0.000000]  Normal zone: 975 pages used for memmap

[    0.000000]  Normal zone: 123937 pages, LIFO batch:31

[    0.000000]  HighMem zone: 0 pages used for memmap

[    0.000000]  Movable zone: 0 pages used for memmap

[    0.000000] DMI 2.3 present.

[    0.000000] ACPI: RSDP signature @ 0xC00EA410 checksum 0

[    0.000000] ACPI: RSDP 000EA410, 0014 (r0 COMPAQ)

[    0.000000] ACPI: RSDT 000E5E40, 007C (r1 COMPAQ CPQ0064  20030710            0)

[    0.000000] ACPI: FACP 000E5EF8, 0074 (r1 COMPAQ SPRINGD        1            0)

[    0.000000] ACPI: DSDT 000E6008, 0D7D (r1 COMPAQ    DSDT        1 MSFT  100000E)

[    0.000000] ACPI: FACS 000E5E00, 0040

[    0.000000] ACPI: SSDT 000E6D85, 05FE (r1 COMPAQ  PROJECT        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E7383, 053A (r1 COMPAQ CORE_PNP        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E78BD, 01F2 (r1 COMPAQ CORE_UTL        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E7AAF, 032E (r1 COMPAQ VILLTBL1        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E7DDD, 053F (r1 COMPAQ LGCYLITE        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E831C, 0167 (r1 COMPAQ    UART2        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E8483, 014E (r1 COMPAQ  FLOPPY        1 MSFT  100000E)

[    0.000000] ACPI: APIC 000E5F6C, 0068 (r1 COMPAQ SPRINGD        1            0)

[    0.000000] ACPI: SSDT 000EA16D, 00B2 (r1 COMPAQ    APIC        1 MSFT  100000E)

[    0.000000] ACPI: ASF! 000E5FD4, 0034 (r16 COMPAQ SPRINGD        1            0)

[    0.000000] ACPI: SSDT 000E8A3F, 040F (r1 COMPAQ PNP_PRSS        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E8E4E, 016D (r1 COMPAQ UR2_PRSS        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E8FBB, 0119 (r1 COMPAQ FPY_PRSS        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E9189, 0167 (r1 COMPAQ      S3        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E92F0, 00E3 (r1 COMPAQ  CORE_S3        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E93D3, 013E (r1 COMPAQ  PIDETM        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E9955, 016B (r1 COMPAQ    GTF0        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E9511, 0143 (r1 COMPAQ  SIDETM        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E9DA0, 0170 (r1 COMPAQ    GTF3        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000E9F10, 00F0 (r1 COMPAQ      L08        1 MSFT  100000E)

[    0.000000] ACPI: SSDT 000EA371, 0054 (r1 COMPAQ    FINIS        1 MSFT  100000E)

[    0.000000] ACPI: DMI detected: Hewlett-Packard

[    0.000000] ACPI: PM-Timer IO Port: 0xf808

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[    0.000000] Processor #0 15:2 APIC version 20

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)

[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000

[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128001

[    0.000000] Kernel command line: initrd=initrd.gz boot=casper quiet splash BOOT_IMAGE=vmlinuz 

[    0.000000] mapped APIC to ffffb000 (fee00000)

[    0.000000] mapped IOAPIC to ffffa000 (fec00000)

[    0.000000] Enabling fast FPU save and restore... done.

[    0.000000] Enabling unmasked SIMD FPU exception support... done.

[    0.000000] Initializing CPU#0

[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[    0.000000] Detected 2660.045 MHz processor.

[  17.333468] Console: colour VGA+ 80x25

[  17.333472] console [tty0] enabled

[  17.333795] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[  17.334072] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[  17.344039] Memory: 499708k/516032k available (2178k kernel code, 15672k reserved, 1013k data, 368k init, 0k highmem)

[  17.344048] virtual kernel memory layout:

[  17.344049]    fixmap  : 0xfff4b000 - 0xfffff000  ( 720 kB)

[  17.344050]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)

[  17.344051]    vmalloc : 0xe0000000 - 0xff7fe000  ( 503 MB)

[  17.344052]    lowmem  : 0xc0000000 - 0xdf7f0000  ( 503 MB)

[  17.344053]      .init : 0xc0423000 - 0xc047f000  ( 368 kB)

[  17.344054]      .data : 0xc03208e8 - 0xc041ddc4  (1013 kB)

[  17.344055]      .text : 0xc0100000 - 0xc03208e8  (2178 kB)

[  17.344058] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[  17.344099] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

[  17.423926] Calibrating delay using timer specific routine.. 5324.95 BogoMIPS (lpj=10649912)

[  17.423954] Security Framework initialized

[  17.423962] SELinux:  Disabled at boot.

[  17.423977] AppArmor: AppArmor initialized

[  17.423981] Failure registering capabilities with primary security module.

[  17.423990] Mount-cache hash table entries: 512

[  17.424131] Initializing cgroup subsys ns

[  17.424135] Initializing cgroup subsys cpuacct

[  17.424147] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000

[  17.424161] CPU: Trace cache: 12K uops, L1 D cache: 8K

[  17.424163] CPU: L2 cache: 512K

[  17.424166] CPU: Hyper-Threading is disabled

[  17.424169] CPU: After all inits, caps: bfebfbff 00000000 00000000 00043080 00004400 00000000 00000000 00000000

[  17.424181] Compat vDSO mapped to ffffe000.

[  17.424196] Checking 'hlt' instruction... OK.

[  17.440294] SMP alternatives: switching to UP code

[  17.441937] Freeing SMP alternatives: 11k freed

[  17.442087] Early unpacking initramfs... done

[  17.753120] ACPI: Core revision 20070126

[  17.753163] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[  17.755587] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07

[  17.755626] Total of 1 processors activated (5324.95 BogoMIPS).

[  17.755759] ENABLING IO-APIC IRQs

[  17.755936] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[  17.902812] Brought up 1 CPUs

[  17.902833] CPU0 attaching sched-domain:

[  17.902836]  domain 0: span 01

[  17.902838]  groups: 01

[  17.903044] net_namespace: 64 bytes

[  17.903055] Booting paravirtualized kernel on bare hardware

[  17.903612] Time:  9:25:24  Date: 09/27/10

[  17.903640] NET: Registered protocol family 16

[  17.903881] EISA bus registered

[  17.903906] ACPI: bus type pci registered

[  17.904223] PCI: PCI BIOS revision 2.20 entry at 0xec5a9, last bus=5

[  17.904226] PCI: Using configuration type 1

[  17.904239] Setting up standard PCI resources

[  17.905629] ACPI: EC: Look up EC in DSDT

[  17.907014] ACPI: Interpreter enabled

[  17.907018] ACPI: (supports S0 S1 S3 S4 S5)

[  17.907033] ACPI: Using IOAPIC for interrupt routing

[  17.910693] ACPI: PCI Root Bridge [PCI0] (0000:00)

[  17.911198] Force enabled HPET at base address 0xfed00000

[  17.911205] PCI: Enabled i801 SMBus device

[  17.911211] PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO

[  17.911214] PCI quirk: region fa00-fa3f claimed by ICH4 GPIO

[  17.911584] PCI: Transparent bridge - 0000:00:1e.0

[  17.911605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[  17.911813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]

[  17.917245] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)

[  17.917325] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)

[  17.917403] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)

[  17.917481] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)

[  17.917559] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)

[  17.917637] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.

[  17.917716] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.

[  17.917795] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)

[  17.917952] Linux Plug and Play Support v0.97 (c) Adam Belay

[  17.917991] pnp: PnP ACPI init

[  17.918001] ACPI: bus type pnp registered

[  17.920476] pnp: PnP ACPI: found 14 devices

[  17.920480] ACPI: ACPI bus type pnp unregistered

[  17.920485] PnPBIOS: Disabled by ACPI PNP

[  17.920762] PCI: Using ACPI for IRQ routing

[  17.920766] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[  17.978590] NET: Registered protocol family 8

[  17.978593] NET: Registered protocol family 20

[  17.978717] hpet clockevent registered

[  17.978722] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[  17.978727] hpet0: 3 64-bit timers, 14318180 Hz

[  17.979771] AppArmor: AppArmor Filesystem Enabled

[  17.982569] Time: tsc clocksource has been installed.

[  17.990604] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved

[  17.990612] system 00:0c: ioport range 0x400-0x41f has been reserved

[  17.990615] system 00:0c: ioport range 0x420-0x43f has been reserved

[  17.990618] system 00:0c: ioport range 0x440-0x45f has been reserved

[  17.990620] system 00:0c: ioport range 0x460-0x47f has been reserved

[  17.990623] system 00:0c: ioport range 0xf800-0xf81f has been reserved

[  17.990626] system 00:0c: ioport range 0xf820-0xf83f has been reserved

[  17.990628] system 00:0c: ioport range 0xf840-0xf85f has been reserved

[  17.990631] system 00:0c: ioport range 0xf860-0xf87f has been reserved

[  17.990634] system 00:0c: ioport range 0xfa00-0xfa3f has been reserved

[  17.990637] system 00:0c: ioport range 0xfc00-0xfc7f could not be reserved

[  17.990641] system 00:0c: ioport range 0xfc80-0xfcff has been reserved

[  17.990644] system 00:0c: ioport range 0xfe00-0xfe7f has been reserved

[  17.990646] system 00:0c: ioport range 0xfe80-0xfeff has been reserved

[  17.990660] system 00:0d: iomem range 0x0-0x9ffff could not be reserved

[  17.990664] system 00:0d: iomem range 0x100000-0x1f7fffff could not be reserved

[  17.990666] system 00:0d: iomem range 0x1f800000-0x1f8fffff could not be reserved

[  17.990669] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved

[  17.990672] system 00:0d: iomem range 0xfec01000-0xffffffff could not be reserved

[  17.990675] system 00:0d: iomem range 0xcc600-0xdffff has been reserved

[  18.021104] PCI: Bridge: 0000:00:1e.0

[  18.021107]  IO window: disabled.

[  18.021112]  MEM window: fc500000-fc7fffff

[  18.021116]  PREFETCH window: disabled.

[  18.021131] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[  18.021144] NET: Registered protocol family 2

[  18.058473] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[  18.058720] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[  18.058800] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

[  18.058881] TCP: Hash tables configured (established 16384 bind 16384)

[  18.058883] TCP reno registered

[  18.070509] checking if image is initramfs... it is

[  18.481351] Switched to high resolution mode on CPU 0

[  18.675562] Freeing initrd memory: 7089k freed

[  18.676248] audit: initializing netlink socket (disabled)

[  18.676266] audit(1285579525.228:1): initialized

[  18.678652] VFS: Disk quotas dquot_6.5.1

[  18.678739] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[  18.678907] io scheduler noop registered

[  18.678910] io scheduler anticipatory registered

[  18.678912] io scheduler deadline registered

[  18.678925] io scheduler cfq registered (default)

[  18.678940] Boot video device is 0000:00:02.0

[  18.679269] isapnp: Scanning for PnP cards...

[  19.032578] isapnp: No Plug & Play device found

[  19.066715] Real Time Clock Driver v1.12ac

[  19.066827] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[  19.066957] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[  19.067114] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[  19.068191] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[  19.069138] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[  19.069219] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[  19.069346] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12

[  19.072056] serio: i8042 KBD port at 0x60,0x64 irq 1

[  19.072061] serio: i8042 AUX port at 0x60,0x64 irq 12

[  19.079890] mice: PS/2 mouse device common for all mice

[  19.080025] EISA: Probing bus 0 at eisa.0

[  19.080033] Cannot allocate resource for EISA slot 1

[  19.080063] EISA: Detected 0 cards.

[  19.080066] cpuidle: using governor ladder

[  19.080068] cpuidle: using governor menu

[  19.080176] NET: Registered protocol family 1

[  19.080210] Using IPI No-Shortcut mode

[  19.080250] registered taskstats version 1

[  19.080351]  Magic number: 10:375:425

[  19.080471] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[  19.080472] EDD information not available.

[  19.080916] Freeing unused kernel memory: 368k freed

[  19.080941] Write protecting the kernel read-only data: 808k

[  19.111730] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[  20.284150] fuse init (API version 7.9)

[  20.305825] ACPI: Processor [CPU0] (supports 8 throttling states)

[  20.305844] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]

[  20.719691] usbcore: registered new interface driver usbfs

[  20.719721] usbcore: registered new interface driver hub

[  20.728116] usbcore: registered new device driver usb

[  20.739598] USB Universal Host Controller Interface driver v3.0

[  20.739682] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16

[  20.739696] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[  20.739700] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[  20.740045] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

[  20.740076] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001440

[  20.740232] usb usb1: configuration #1 chosen from 1 choice

[  20.740265] hub 1-0:1.0: USB hub found

[  20.740272] hub 1-0:1.0: 2 ports detected

[  20.843438] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17

[  20.843452] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[  20.843457] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[  20.843484] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

[  20.843512] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001460

[  20.843644] usb usb2: configuration #1 chosen from 1 choice

[  20.843672] hub 2-0:1.0: USB hub found

[  20.843679] hub 2-0:1.0: 2 ports detected

[  20.939337] SCSI subsystem initialized

[  20.949597] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

[  20.949614] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[  20.949618] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[  20.949650] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

[  20.949679] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001480

[  20.949808] usb usb3: configuration #1 chosen from 1 choice

[  20.949834] hub 3-0:1.0: USB hub found

[  20.949841] hub 3-0:1.0: 2 ports detected

[  20.987291] libata version 3.00 loaded.

[  21.051021] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19

[  21.051038] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[  21.051042] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[  21.051083] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4

[  21.054995] ehci_hcd 0000:00:1d.7: debug port 1

[  21.055002] PCI: cache line size of 128 is not supported by device 0000:00:1d.7

[  21.055013] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc480000

[  21.082709] usb 1-1: new low speed USB device using uhci_hcd and address 2

[  21.094679] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[  21.094837] usb usb4: configuration #1 chosen from 1 choice

[  21.094865] hub 4-0:1.0: USB hub found

[  21.094874] hub 4-0:1.0: 8 ports detected

[  21.107499] Floppy drive(s): fd0 is 1.44M

[  21.128681] FDC 0 is a post-1991 82077

[  21.198624] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

[  21.198634] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18

[  21.198693] PCI: Setting latency timer of device 0000:00:1f.1 to 64

[  21.198708] ACPI: PCI interrupt for device 0000:00:1f.1 disabled

[  21.198721] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18

[  21.198755] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[  21.198765] ACPI: PCI interrupt for device 0000:00:1f.2 disabled

[  21.207962] ata_piix 0000:00:1f.1: version 2.12

[  21.207984] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18

[  21.208036] PCI: Setting latency timer of device 0000:00:1f.1 to 64

[  21.211369] scsi0 : ata_piix

[  21.212353] scsi1 : ata_piix

[  21.212550] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14c0 irq 14

[  21.212553] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14c8 irq 15

[  21.529945] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0D08, max UDMA/33

[  21.701180] hub 4-0:1.0: over-current change on port 7

[  21.701456] ata1.00: configured for UDMA/33

[  21.869416] ata2.01: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/100

[  21.869421] ata2.01: 78165360 sectors, multi 16: LBA 

[  21.884858] ata2.01: configured for UDMA/100

[  21.892628] end_request: I/O error, dev fd0, sector 0

[  21.894685] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0D08 PQ: 0 ANSI: 5

[  21.895236] scsi 1:0:1:0: Direct-Access    ATA      Maxtor 6E040L0  NAR6 PQ: 0 ANSI: 5

[  21.895312] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]

[  22.044233] usb 1-1: new low speed USB device using uhci_hcd and address 3

[  22.048238] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18

[  22.048290] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[  22.048353] scsi2 : ata_piix

[  22.048693] scsi3 : ata_piix

[  22.048735] ata3: SATA max UDMA/133 cmd 0x14f8 ctl 0x1810 bmdma 0x14d0 irq 18

[  22.048738] ata4: SATA max UDMA/133 cmd 0x1800 ctl 0x1814 bmdma 0x14d8 irq 18

[  22.216266] usb 1-1: configuration #1 chosen from 1 choice

[  22.392602] Driver 'sd' needs updating - please use bus_type methods

[  22.394568] sd 1:0:1:0: [sda] 78165360 512-byte hardware sectors (40021 MB)

[  22.394585] sd 1:0:1:0: [sda] Write Protect is off

[  22.394588] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00

[  22.394611] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[  22.394672] sd 1:0:1:0: [sda] 78165360 512-byte hardware sectors (40021 MB)

[  22.394685] sd 1:0:1:0: [sda] Write Protect is off

[  22.394688] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00

[  22.394709] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[  22.394714]  sda:<4>Driver 'sr' needs updating - please use bus_type methods

[  22.402214] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray

[  22.402221] Uniform CD-ROM driver Revision: 3.20

[  22.402289] sr 0:0:0:0: Attached scsi CD-ROM sr0

[  22.455197] usb 3-2: new full speed USB device using uhci_hcd and address 2

[  22.611378] usb 3-2: configuration #1 chosen from 1 choice

[  22.614480] usbcore: registered new interface driver hiddev

[  22.627336] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2

[  22.638839] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1

[  22.642279] input: Microsoft LifeChat LX-3000  as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.3/input/input3

[  22.654760] input,hidraw1: USB HID v1.00 Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:1d.2-2

[  22.654783] usbcore: registered new interface driver usbhid

[  22.654788] /nfs/.sda3/gnewsense-builder-temp-dir/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[  22.929989] end_request: I/O error, dev fd0, sector 0

[  23.098528]  sda1

[  23.098623] sd 1:0:1:0: [sda] Attached SCSI disk

[  23.110096] sr 0:0:0:0: Attached scsi generic sg0 type 5

[  23.110120] sd 1:0:1:0: Attached scsi generic sg1 type 0

[  24.011235] end_request: I/O error, dev fd0, sector 0

[  24.460827] ISO 9660 Extensions: Microsoft Joliet Level 3

[  24.465088] ISO 9660 Extensions: RRIP_1991A

[  24.487078] loop: module loaded

[  24.592449] squashfs: version 3.3 (2007/10/31) Phillip Lougher

[  24.793122] Registering unionfs 1.4

[  24.793128] unionfs: debugging is not enabled

[  61.568300] Linux agpgart interface v0.102

[  61.727328] agpgart: Detected an Intel 865 Chipset.

[  61.727434] agpgart: Detected 8060K stolen memory.

[  61.774325] agpgart: AGP aperture is 128M @ 0xf0000000

[  61.975317] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[  62.082145] input: Power Button (FF) as /devices/virtual/input/input4

[  62.094275] ACPI: Power Button (FF) [PWRF]

[  62.094434] input: Power Button (CM) as /devices/virtual/input/input5

[  62.110232] ACPI: Power Button (CM) [PBTN]

[  62.118312] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[  62.972285] iTCO_vendor_support: vendor-support=0

[  63.004004] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[  63.004154] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware

[  63.004161] iTCO_wdt: No card detected

[  63.115716] intel_rng: Firmware space is locked read-only. If you can't or

[  63.115720] intel_rng: don't want to disable this in firmware setup, and if

[  63.115721] intel_rng: you are certain that your system has a functional

[  63.115722] intel_rng: RNG, try using the 'no_fwh_detect' option.

[  64.261041] input: PC Speaker as /devices/platform/pcspkr/input/input6

[  64.756431] parport_pc 00:07: reported by Plug and Play ACPI

[  64.756484] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]

[  64.916373] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20

[  64.916404] PCI: Setting latency timer of device 0000:00:1f.5 to 64

[  65.155077] usbcore: registered new interface driver snd-usb-audio

[  65.334176] intel8x0_measure_ac97_clock: measured 54866 usecs

[  65.334181] intel8x0: clocking to 48000

[  69.061747] ip_tables: (C) 2000-2006 Netfilter Core Team

[  71.476126] No dock devices found.

[  74.585306] apm: BIOS not found.

[  74.717190] lp0: using parport0 (interrupt-driven).

[  74.767851] ppdev: user-space parallel port driver

[  79.879662] Bluetooth: Core ver 2.11

[  79.880487] NET: Registered protocol family 31

[  79.880493] Bluetooth: HCI device and connection manager initialized

[  79.880498] Bluetooth: HCI socket layer initialized

[  79.933943] Bluetooth: L2CAP ver 2.9

[  79.933948] Bluetooth: L2CAP socket layer initialized

[  80.182121] Bluetooth: RFCOMM socket layer initialized

[  80.182396] Bluetooth: RFCOMM TTY layer initialized

[  80.182400] Bluetooth: RFCOMM ver 1.8

[  86.552018] [drm] Initialized drm 1.1.0 20060810

[  86.694814] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16

[  86.694826] PCI: Setting latency timer of device 0000:00:02.0 to 64

[  86.694919] [drm] Initialized i915 1.6.0 20060119 on minor 0

[  99.507387] NET: Registered protocol family 10

[  99.507952] lo: Disabled Privacy Extensions