LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 08-26-2003, 04:29 PM   #16
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
A Development Haas Occurred


OK, to keep everyone up to speed...

1. Have decided to crack on with Slack... I'm having fun learning the code!!

2. Have also order a disc for Mandrake 9.1... I took everyone's views into account (so thank you for your input ) and also did a quick run through on the forums to look at issues around the hardware that I already have and the general "feeling" of the different Distro's...

3. Cracked the initial problem regarding the Video driver, I now get the top left corner of an NVIDIA splash (promising, but would assume it's the screen resolution at this point)

4. Still not running through <startx>, now saying that it cannot find my Mouse... have had a root about in the filesystem and the path to the mouse driver does not exist (it's looking for /dev/mouse).

So, assuming that point 4 is my greatest concern, and I'm gonna need a little help if you kind folks would oblige, how do I go about creating the directory with the correct mouse driver? (plain ole 2 button Microsoft mouse, with a metal tension wheel, old faithful if you will!!)

Before you ask, I have run XF86Config a couple of times with different meese options, but still reports the same error!!

Gonna try and get the log output onto the post, however, currently on work laptop and haven't yet figured out how to copy the file across on floppy (my next code challenge!!)

Still going for it!!
 
Old 08-26-2003, 04:36 PM   #17
slakmagik
Senior Member
 
Registered: Feb 2003
Distribution: Slackware
Posts: 4,113

Rep: Reputation: Disabled
'ln -s /dev/psaux /dev/mouse ' should do it, I think - assuming I haven't gotten them backwards again. /dev/mouse is just a symlink to the actual device which is psaux for ps/2 - not sure about a usb.
 
Old 08-26-2003, 06:15 PM   #18
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
OK.... we're going to take a long breath... flex the muscles and open the window before the box flies onto the road.....


So's you know, we have total failure of something with my main box.....



AAAAAAAARRRRRRRRGGGGGGGGHHHHHHHHHH (In true Commando comic style)

I am now officially (ripping of shirt, going green round the gills, running to slow 70's wah wah guitar music.... etc, you get the picture)

Not a problem caused by my Linux build I might add.... was rebuilding my XP after a System boot error and .........


pht. Power off... power going to the mother board, fans spark and die.... time to dig or invest in a new PSU.... (I hope it's just that)

Will be back to let you know how I get on installing the rest of Linux!!

Thankyou for your help, once again....
 
Old 08-27-2003, 02:32 PM   #19
bigjohn
Senior Member
 
Registered: Jun 2002
Location: UK .
Distribution: *buntu (usually Kubuntu)
Posts: 2,682
Blog Entries: 9

Rep: Reputation: 45
Keep at it,

Doesn't matter how bad things get, the stress can only get worse

Though I hope the "pht" isn't tooooooo expensive!

regards

John
 
Old 08-27-2003, 04:52 PM   #20
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
Thankx for the sentiment bigjohn,

15 (that's "oojar" euro's for our european friends) for a new PSU... thank someone in the ethereal that it wasn't the mother board!!!

Gonna get back on the case with the mouse thing now I'm back up and running.... I'd love to be able to post and work in the same system... isn't working a dual boot system a pain in the "large, rotund dangly bits" (it's a boy thing!!)

Mental state >
 
Old 08-28-2003, 05:54 PM   #21
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
OK, tried the command line that Digiot offered... no joy...

Here's the output from my XF86 log...


XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Aug 28 22:40:51 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Sony HMD220"
(**) | |-->Device "NVIDIA GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "logiinetnav"
(**) XKB: model: "logiinetnav"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80008bc0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3116 card 1106,3116 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 14f1,1034 card 1048,1510 rev 08 class 07,80,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3147 card 1106,3147 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1458,a002 rev 40 class 04,01,00 hdr 00
(II) PCI: 00:13:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0182 card 1462,8900 rev a2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xdde00000 - 0xdfefffff (0x2100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd5c00000 - 0xddcfffff (0x8100000) MX[B]
(II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0182) rev 162, Mem @ 0xde000000/24, 0xd8000000/26, BIOS @ 0xdfee0000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[2] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[3] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[4] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[6] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[7] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[8] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[9] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[10] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[2] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[3] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[4] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[6] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[7] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[8] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[9] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[10] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[14] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[15] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4496
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) NVIDIA XFree86 Driver 1.0-4496 Wed Jul 16 19:06:03 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[14] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[15] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[17] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[18] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[19] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[21] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xDE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 440SE with AGP8X
(--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Detected TV Encoder: NVIDIA
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) NVIDIA(0): Sony HMD220: Using hsync range of 30.00-70.00 kHz
(II) NVIDIA(0): Sony HMD220: Using vrefresh range of 48.00-120.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (330, 240) mm
(--) NVIDIA(0): DPI set to (98, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[1] 0 0xde000000 - 0xdeffffff (0x1000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[8] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[9] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[10] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[11] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[12] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[19] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[20] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[21] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[24] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) NVIDIA(0): Failed to verify AGP usage
(II) NVIDIA(0): Setting mode "640x480"
(EE) NVIDIA(0): Failed to load GLX
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "Microsoft"
(**) Mouse1: Protocol: "Microsoft"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "Mouse"
(EE) xf86OpenSerial: Cannot open device Mouse
No such file or directory.
(EE) Mouse1: cannot open input device
(EE) PreInit failed for input device "Mouse1"
(II) UnloadModule: "mouse"
(II) Keyboard "Keyboard1" handled by legacy driver
(WW) No core pointer registered
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
No core pointer

Fatal server error:
failed to initialize core devices

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.



 
Old 08-28-2003, 06:34 PM   #22
BigBadPenguin
Member
 
Registered: Jun 2003
Location: Warwick (.ac.uk)
Distribution: Arch, Slackware 9.0, (knoppix standing by)
Posts: 256

Rep: Reputation: 30
mind if i jump in on this? If you could post your /etc/X11/XF86Config up as well, i'm sure this problem can be cracked.
cheers
 
Old 08-28-2003, 06:38 PM   #23
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
One XF86Config.....

Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
# Load "glx"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "logiinetnav"
Option "XkbLayout" "gb"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "Mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Sony HMD220"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30 - 70

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 48 - 120

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
#VideoRam 25536
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "Sony HMD220"
DefaultDepth 24

Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection



 
Old 08-28-2003, 07:01 PM   #24
BigBadPenguin
Member
 
Registered: Jun 2003
Location: Warwick (.ac.uk)
Distribution: Arch, Slackware 9.0, (knoppix standing by)
Posts: 256

Rep: Reputation: 30
cool, couple of things i noticed, but they might not be the only things...
first up, one of the errrors was because you're loading the nvidia driver without GLX so, remove the # in the line
# Load "glx"
(the # made it a comment)
The other thing is the mouse section looks a bit dodgy... You have a wheelmouse, plugged into the ps/2 port right? try changing your mouse section to this:

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"

If that doesn't fly try Option "Protocol" "ps/2" but i honestly can't remember... bet the others can.

Also, i'd option out the ChordMiddle bit, you don't need it and it might cause problems.
If this works without problems, and you want to add functionality to the wheel, add:
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
to your mouse section. to get scrolling.
Hope this helps!
 
Old 08-28-2003, 07:07 PM   #25
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
Cheers for that BigBad...

I'm using a Logitehch three button mouse, not a wheel mouse... presumably this will have an effect on the settings in the mouse section???

 
Old 08-28-2003, 07:11 PM   #26
BigBadPenguin
Member
 
Registered: Jun 2003
Location: Warwick (.ac.uk)
Distribution: Arch, Slackware 9.0, (knoppix standing by)
Posts: 256

Rep: Reputation: 30
ok.. well, if its plugged in to the ps/2 port you should only need to change the protocol option.. i'm not sure exactly to what tho. Try googling it and looking at xfree.org as well. I'll have a gander too.
 
Old 08-28-2003, 07:20 PM   #27
BigBadPenguin
Member
 
Registered: Jun 2003
Location: Warwick (.ac.uk)
Distribution: Arch, Slackware 9.0, (knoppix standing by)
Posts: 256

Rep: Reputation: 30
alright, i saw this, thanks to the online manuals
Quote:
Specify "Auto" as the protocol type and start the X server. If the mouse is not a PnP mouse, or the X server cannot determine a suitable protocol type, the server will print the following error message and abort.

<mousename>: cannot determine the mouse protocol

If the X server generates the above error message, you need to manually specify a protocol type for your mouse. Choose one from the following list:

* GlidePoint
* IntelliMouse
* Logitech
* Microsoft
* MMHittab
* MMSeries
* MouseMan
* MouseSystems
* ThinkingMouse

When you choose, keep in mind the following rule of thumb:

1. "Logitech" protocol is for old serial mouse models from Logitech. Modern Logitech mice use either "MouseMan" or "Microsoft" protocol.
2. Most 2-button serial mice support the "Microsoft" protocol.
3. 3-button serial mice may work with the "Mousesystems" protocol. If it doesn't, it may work instead with the "Microsoft" protocol although the third (middle) button won't function. 3-button serial mice may also work with the "Mouseman" protocol under which the third button may function as expected.
4. 3-button serial mice may have a small switch at the bottom of the mouse to choose between ``MS'' and ``PC'', or ``2'' and ``3''. ``MS'' or ``2'' usually mean the "Microsoft" protocol. ``PC'' or ``3'' will choose the "MouseSystems" protocol.
5. If the serial mouse has a roller or a wheel, it may be compatible with the "IntelliMouse" protocol.
6. If the serial mouse has a roller or a wheel and it doesn't work with the "IntelliMouse" protocol, you have to use it as a regular 2- or 3-button serial mouse.

If the "Auto" protocol is specified and the mouse seems working, but you find that not all features of the mouse is available, that is because the X server does not have native support for that model of mouse and is using a ``compatible'' protocol according to PnP information.
http://www.xfree86.org/current/mouse4.html#20
 
Old 08-28-2003, 07:48 PM   #28
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
Good news first...

Thee list of error messages is getting shorter!!

Still no mouse though... here's the latest log file (I have tried using Auto protocol and ps/2 with same results)...

Quote:
XFree Log File

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 29 00:37:31 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Sony HMD220"
(**) | |-->Device "NVIDIA GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "logiinetnav"
(**) XKB: model: "logiinetnav"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800000a8, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3116 card 1106,3116 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 14f1,1034 card 1048,1510 rev 08 class 07,80,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3147 card 1106,3147 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1458,a002 rev 40 class 04,01,00 hdr 00
(II) PCI: 00:13:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0182 card 1462,8900 rev a2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xdde00000 - 0xdfefffff (0x2100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd5c00000 - 0xddcfffff (0x8100000) MX[B]
(II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia unknown chipset (0x0182) rev 162, Mem @ 0xde000000/24, 0xd8000000/26, BIOS @ 0xdfee0000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[2] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[3] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[4] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[6] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[7] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[8] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[9] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[10] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[1] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[2] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[3] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[4] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[5] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[6] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[7] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[8] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[9] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[10] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[14] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[15] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4496
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4496
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) NVIDIA XFree86 Driver 1.0-4496 Wed Jul 16 19:06:03 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[14] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[15] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[18] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[6] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[9] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[10] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[17] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[18] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[19] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[20] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[21] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xDE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 440SE with AGP8X
(--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Detected TV Encoder: NVIDIA
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) NVIDIA(0): Sony HMD220: Using hsync range of 30.00-70.00 kHz
(II) NVIDIA(0): Sony HMD220: Using vrefresh range of 48.00-120.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(**) NVIDIA(0): Validated modes for display device CRT-0:
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (330, 240) mm
(--) NVIDIA(0): DPI set to (98, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
[1] 0 0xde000000 - 0xdeffffff (0x1000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xdffeff00 - 0xdffeffff (0x100) MX[B]
[8] -1 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[9] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[10] -1 0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
[11] -1 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[12] -1 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[19] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[20] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[21] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[23] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[24] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[25] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(WW) NVIDIA(0): Failed to verify AGP usage
(II) NVIDIA(0): Setting mode "1280x1024"
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) [GLX]: Initializing GLX extension
(**) Option "Protocol" "ps/2"
(**) Mouse1: Protocol: "ps/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "Mouse"
(EE) xf86OpenSerial: Cannot open device Mouse
No such file or directory.
(EE) Mouse1: cannot open input device
(EE) PreInit failed for input device "Mouse1"
(II) UnloadModule: "mouse"
(II) Keyboard "Keyboard1" handled by legacy driver
(WW) No core pointer registered
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
No core pointer

Fatal server error:
failed to initialize core devices

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.



 
Old 08-28-2003, 08:02 PM   #29
BigBadPenguin
Member
 
Registered: Jun 2003
Location: Warwick (.ac.uk)
Distribution: Arch, Slackware 9.0, (knoppix standing by)
Posts: 256

Rep: Reputation: 30
It looks like you didn't completely correct your XF86Config
I think changing the line to Option "Device" "/dev/mouse" should do the trick.
 
Old 08-29-2003, 04:56 AM   #30
noclue_menew
LQ Newbie
 
Registered: Aug 2003
Location: Durham, UK
Distribution: Mandrake 9.1 , XP Pro, Knoppix on CD (for those "moments")
Posts: 24

Original Poster
Rep: Reputation: 15
Smile WOOOO HOOOOOOOOOOOOOOO

BigBad and all that have helped!!!

We have victory!!!!



THANKYOU very much for all your help with getting this one working...

I feel like a beaver that's found a Salmon farm!!




Think it might be time to close this thread... I get the feeling I may well now be posting new threads now that the power of Linux is at my finger tips!!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting Started mattp Linux - Laptop and Netbook 6 01-09-2005 12:51 AM
Getting started k06878 Linux - Newbie 12 11-19-2004 09:42 AM
Getting Started burningtheory Linux - Distributions 2 09-07-2004 04:32 PM
Help Getting started reddog64 Linux - Newbie 9 04-18-2004 11:45 PM
getting started ? gsmackay Programming 3 04-15-2003 12:46 PM


All times are GMT -5. The time now is 10:31 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration