LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 04-29-2014, 06:25 PM   #1
Eyeball114
LQ Newbie
 
Registered: Apr 2014
Posts: 3

Rep: Reputation: Disabled
fsck.ext3: unable to resolve 'LABEL=/ser'


I halted my system, installed a DIMM of RAM then booted.
This error followed:

Code:
Checking filesystems
/dev/mapper/vg/_server-lv_root: clean, 89329/3278000 files, 964803/13107200 blocks
/dev/sdc1: clean , 46/128016 files, 85613/512000 blocks
/dev/mapper/vg/_server-lv_home: clean, 309/57237504 files, 3646995/228918272 blocks
fsck.ext3 unable to resolve 'LABEL=/ser'

blkid output

Code:
/dev/mapper/vg_server-lv_root: UUID="0f2c58cd-c334-40fe-8967-4a1a47920d1a" TYPE="ext4"
/dev/sda: TYPE="isw_raid_member"
/dev/sdc1: UUID="0e573506-5657-4820-8e83-83a5a5479a49" TYPE="ext4"
/dev/sdc2: UUID="eFDFzc-a795-fNQx-auKD-J9Np-z9tr-H30zXB" TYPE="LVM2_member"
/dev/mapper/vg_server-lv_swap: UUID="e07e211d=1d7c-4cc2-a16e-b583af6c2878" TYPE="swap"
/dev/mapper/vg_server-lv_home: UUID="85bbffe8-598c-477e-b62f-f9db48be8fe" TYPE="ext4"
fstab output
Code:
/dev/mapper/vg_server-lv_root /                                            ext4          defaults               1 1
UUID=0e573506-5657-4820-8e83-83a5a5479a49 /boot                                              ext4         defaults               1 2
/dev/mapper/vg_server-lv_home /home                                           ext4          defaults               1 2
/dev/mapper/vg_server-lv_swap swap                                              swap         defaults                0 0
tmpfs                                 /dev/shm                                   tmpfs       defaults                0 0
devpts                                /dev/pts                                    devpts      gid=5,mode=620    0 0
sysfs                                   /sys                                           sysfs        defaults                0 0
proc                                   /proc                                          proc         defaults                0 0

LABEL=/ser /servers ext3 defaults 1 2
Ive got 3x 1 TB drives. 1 is boot and the other 2 are in RAID 1.

Any help is appreciated. This is just a hobby of mine so I am by no means an expert so sorry for any "noobish" responses.
 
Old 04-29-2014, 10:36 PM   #2
kbp
Senior Member
 
Registered: Aug 2009
Posts: 3,790

Rep: Reputation: 650Reputation: 650Reputation: 650Reputation: 650Reputation: 650Reputation: 650
So what device/partition was previously mounted at /servers ?

I'm just guessing that you had mounted an external disk at /servers sometime in the past as a partition with the label '/ser' can't be found right now. If you don't know what was mounted there then just comment out the line in /etc/fstab
 
Old 04-29-2014, 10:51 PM   #3
Eyeball114
LQ Newbie
 
Registered: Apr 2014
Posts: 3

Original Poster
Rep: Reputation: Disabled
Heres the thing that I am confused about. I posted this on the centos forums and mentioned
that I have all my saves at /mnt/servers/
which is where I have been accessing, editing, etc my game servers I host.
The only drives Ive ever mounted are the boot drive, and the RAID array.

But someone who was giving me a hand said that that info and the outputs I produced didnt match up.
He said Ive never had anything mounted there. But Ive been using that path for at least a month.
Today is also the first day I halted/rebooted the server since its build a little over a month ago.
Ive commented out the LABEL=/ser /servers ext3 defaults 1 2 and was able to boot in.
My main concern now is recovery the saves from the RAID array. If I can get some data I wont mind redoing the array and re mounting.
 
Old 04-29-2014, 10:53 PM   #4
PTrenholme
Senior Member
 
Registered: Dec 2004
Location: Olympia, WA, USA
Distribution: Fedora, (K)Ubuntu
Posts: 4,186

Rep: Reputation: 346Reputation: 346Reputation: 346Reputation: 346
Or, if you want to leave it in, but wish to be able to boot, change
Code:
LABEL=/ser /servers ext3 defaults 1 2
to
Code:
LABEL=/ser /servers ext3 defaults,noauto,nofail 0 0
 
Old 04-30-2014, 07:15 AM   #5
michaelk
Moderator
 
Registered: Aug 2002
Posts: 15,816

Rep: Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784
Check the output of the dmesg command. Since there is only one raid drive showing up in the output of the blkid command something could of failed or become corrupted with /dev/sdb.

What is the output of the command:
cat /proc/mdstat
 
Old 04-30-2014, 11:19 AM   #6
Eyeball114
LQ Newbie
 
Registered: Apr 2014
Posts: 3

Original Poster
Rep: Reputation: Disabled
dmesg:

Code:
Initializing cgroup subsys cpuset


ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7412000 port 0xf7412100 irq 32
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 32
ata3: SATA max UDMA/133 abar m2048@0xf7412000 port 0xf7412200 irq 32
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 32
ata5: SATA max UDMA/133 abar m2048@0xf7412000 port 0xf7412300 irq 32
ata6: SATA max UDMA/133 abar m2048@0xf7412000 port 0xf7412380 irq 32
ahci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:03:00.0: irq 33 for MSI/MSI-X
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:03:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7310000 port 0xf7310100 irq 33
ata8: SATA max UDMA/133 abar m512@0xf7310000 port 0xf7310180 irq 33
ata3: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10EFRX-68PJCN0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68P 01.0 PQ: 0 ANSI: 5
usb 3-2: new low speed USB device number 2 using xhci_hcd
usb 3-2: New USB device found, idVendor=04d9, idProduct=1503
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keyboard
usb 3-2: Manufacturer:
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input3
generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-2/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input4
generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-2/input1
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD10EFRX-68PJCN0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD10EFRX-68P 01.0 PQ: 0 ANSI: 5
ata4.00: ATA-8: WDC WD10EARX-00N0YB0, 51.0AB51, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EARX-00N 51.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
 sdb:
 sdc: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
 unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
 sdc1 sdc2
sd 3:0:0:0: [sdc] Attached SCSI disk
dracut: Scanning devices sdc2  for LVM logical volumes vg_server/lv_swap vg_server/lv_root
dracut: inactive '/dev/vg_server/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_server/lv_home' [873.25 GiB] inherit
dracut: inactive '/dev/vg_server/lv_swap' [7.77 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_server-lv_root
dracut: Loading SELinux policy
type=1404 audit(1398820842.312:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277805 rules.
SELinux: 2048 avtab hash slots, 277805 rules.
SELinux:  9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux:  81 classes, 277805 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1398820842.653:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: resource (null) [io  0x1828-0x182f] conflicts with ACPI region PMIO [io 0x1800-0x187f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: resource (null) [io  0x1c00-0x1c3f] conflicts with ACPI region GPRL [io 0x1c00-0x1c3f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io  0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:04:00.0: setting latency timer to 64
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 34 for MSI/MSI-X
  alloc irq_desc for 35 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 35 for MSI/MSI-X
  alloc irq_desc for 36 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 36 for MSI/MSI-X
  alloc irq_desc for 37 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 37 for MSI/MSI-X
  alloc irq_desc for 38 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:04:00.0: irq 38 for MSI/MSI-X
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) bc:5f:f4:ca:6b:3d
igb 0000:04:00.0: eth0: PBA No: 001300-000
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
igb 0000:05:00.0: setting latency timer to 64
  alloc irq_desc for 39 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 39 for MSI/MSI-X
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 40 for MSI/MSI-X
  alloc irq_desc for 41 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 41 for MSI/MSI-X
  alloc irq_desc for 42 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 42 for MSI/MSI-X
  alloc irq_desc for 43 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
igb 0000:05:00.0: irq 43 for MSI/MSI-X
igb 0000:05:00.0: added PHC on eth1
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth1: (PCIe:2.5Gb/s:Width x1) bc:5f:f4:ca:6b:3b
igb 0000:05:00.0: eth1: PBA No: 001300-000
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-3c-03
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: CPU0 updated to revision 0x16, date = 2013-08-07
microcode: CPU1 updated to revision 0x16, date = 2013-08-07
microcode: CPU2 updated to revision 0x16, date = 2013-08-07
microcode: CPU3 updated to revision 0x16, date = 2013-08-07
microcode: CPU4 updated to revision 0x16, date = 2013-08-07
microcode: CPU5 updated to revision 0x16, date = 2013-08-07
microcode: CPU6 updated to revision 0x16, date = 2013-08-07
microcode: CPU7 updated to revision 0x16, date = 2013-08-07
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
md: bind<sda>
md: bind<sdb>
md: bind<sdb>
md: bind<sda>
md: raid1 personality registered for level 1
bio: create slab <bio-1> at 1
md/raid1:md126: active with 1 out of 2 mirrors
md126: detected capacity change from 0 to 950150365184
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda
 disk 1, wo:1, o:1, dev:sdb
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda
 disk 1, wo:1, o:1, dev:sdb
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda
 disk 1, wo:1, o:1, dev:sdb
 md126: unknown partition table
md: md126 switched to read-write mode.
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda
 disk 1, wo:1, o:1, dev:sdb
RAID1 conf printout:
 --- wd:1 rd:2
 disk 0, wo:0, o:1, dev:sda
 disk 1, wo:1, o:1, dev:sdb
md: recovery of RAID array md126
md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
md: using 128k window, over a total of 927881348k.
md: export_rdev(sdb)
md: export_rdev(sda)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdc1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 8142840k swap on /dev/mapper/vg_server-lv_swap.  Priority:-1 extents:1 across:8142840k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
8021q: adding VLAN 0 to HW filter on device eth0
ADDRCONF(NETDEV_UP): eth1: link is not ready
8021q: adding VLAN 0 to HW filter on device eth1
md: export_rdev(sdb)
md: export_rdev(sda)
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
nouveau E[     DRM] DDC responded, but no EDID for HDMI-A-1
md: md126: recovery done.
RAID1 conf printout:
 --- wd:2 rd:2
 disk 0, wo:0, o:1, dev:sda
 disk 1, wo:0, o:1, dev:sdb
hrtimer: interrupt took 14042 ns
cat /proc/mdstat:
Code:
Personalities : [raid1]
md126 : active raid1 sda[1] sdb[0]
      927881216 blocks super external:/md127/0 [2/2] [UU]

md127 : inactive sdb[1](S) sda[0](S)
      6306 blocks super external:imsm

unused devices: <none>
 
Old 05-01-2014, 06:44 PM   #7
michaelk
Moderator
 
Registered: Aug 2002
Posts: 15,816

Rep: Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784Reputation: 1784
Lets look at the output of the command.
mdadm --examine /dev/sdb

Here is some information.
https://raid.wiki.kernel.org/index.php/RAID_Recovery
 
Old 05-09-2014, 07:00 PM   #8
PTrenholme
Senior Member
 
Registered: Dec 2004
Location: Olympia, WA, USA
Distribution: Fedora, (K)Ubuntu
Posts: 4,186

Rep: Reputation: 346Reputation: 346Reputation: 346Reputation: 346
Quote:
Originally Posted by Eyeball114 View Post
[...]
cat /proc/mdstat:
Code:
Personalities : [raid1]
md126 : active raid1 sda[1] sdb[0]
      927881216 blocks super external:/md127/0 [2/2] [UU]

md127 : inactive sdb[1](S) sda[0](S)
      6306 blocks super external:imsm

unused devices: <none>
Both partitions in /dev/md127 are flagged as "spare" devices. If you want to use those partitions as another RAID-1 device, I believe that you will need to activate them.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
fsck.ext3 unable to resolve 'label=var' 1.6TB var techux Linux - General 3 03-31-2013 09:02 PM
fsck.ext3: unable to resolve 'LABEL=/' av.dubey Linux - Newbie 5 04-28-2010 05:23 AM
fsck.ext3: Unable to resolve 'LABEL= pm02368 Linux - Newbie 4 09-12-2006 07:15 PM
fsck.ext3: Unable to resolve 'LABEL=/home' Azzath Linux - General 14 04-03-2005 04:45 AM
fsck.ext3 unable to resolve 'LABEL=/home yeehi Linux - General 2 10-20-2004 08:15 AM


All times are GMT -5. The time now is 04:11 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration