Fifa 08 on wine
 

I'm trying to install Fifa 08 on Arch Linux with wine.

2 phar0z@archlinux $ wine EASetup.exe
wine: could not load L"Z:\\mnt\\dvd\\EASetup.exe": Bad EXE format for

And when I'm trying to investigate the exe file I receive:

3 phar0z@archlinux $ file EASetup.exe
EASetup.exe: ERROR: cannot read `EASetup.exe' (Input/output error)

Anyone with a possible solution? thanks

that's what I get when I'm trying it again:

8 root@archlinux $ wine EASetup.exe
wine: Unhandled page fault on write access to 0x00000000 at address 0x4171b3 (thread 0009), starting debugger...
Unhandled exception: page fault on write access to 0x00000000 in 32-bit code (0x004171b3).
Register dump:
CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b
EIP:004171b3 ESP:0033ff0c EBP:0033ffe8 EFLAGS:00010246( - 00 -RIZP1)
EAX:00000000 EBX:7eea4888 ECX:00000000 EDX:00000000
ESI:004171b3 EDI:7ffdf000
Stack dump:
0x0033ff0c: 7ee690de 7ffdf000 00000000 00000000
0x0033ff1c: 00000000 00000000 00000000 00000000
0x0033ff2c: ffffffff 7ee24030 7ee38960 7eea4888
0x0033ff3c: 00110000 00001000 0033ffe8 bb461cd2
0x0033ff4c: 11989c2f 00000001 10012a03 00000000
0x0033ff5c: 00000000 00000000 00000000 00000000
Backtrace:
=>1 0x004171b3 EntryPoint() in easetup (0x0033ffe8)
2 0xb7df5837 wine_switch_to_stack+0x17() in libwine.so.1 (0x00000000)
0x004171b3 EntryPoint in easetup: addb %al,0x0(%eax)
Modules:
Module Address Debug info Name (13 modules)
PE 400000- 461000 Export easetup
ELF 7bf00000-7bf03000 Deferred <wine-loader>
ELF 7edf5000-7ef1d000 Deferred kernel32<elf>
\-PE 7ee10000-7ef1d000 \ kernel32
ELF 7ef1d000-7ef42000 Deferred libm.so.6
ELF 7ef60000-7f000000 Deferred ntdll<elf>
\-PE 7ef70000-7f000000 \ ntdll
ELF b7c84000-b7c88000 Deferred libdl.so.2
ELF b7c88000-b7db9000 Deferred libc.so.6
ELF b7db9000-b7dd0000 Deferred libpthread.so.0
ELF b7de4000-b7dee000 Deferred libnss_files.so.2
ELF b7dee000-b7f02000 Export libwine.so.1
ELF b7f03000-b7f1f000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008 (D) Z:\mnt\dvd\EASetup.exe
00000009 0 <==

dmesg sometimes tells:

sr 0:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 0:0:1:0: [sr0] Sense Key : 0x3 [current]
Info fld=0x63
sr 0:0:1:0: [sr0] ASC=0x2 ASCQ=0x0
end_request: I/O error, dev sr0, sector 396
ISOFS: unable to read i-node block
sr 0:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 0:0:1:0: [sr0] Sense Key : 0x3 [current]
Info fld=0x64
sr 0:0:1:0: [sr0] ASC=0x2 <<vendor>> ASCQ=0x80
end_request: I/O error, dev sr0, sector 400
ISOFS: unable to read i-node block