LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 07-20-2013, 10:10 PM   #1
1adog1
LQ Newbie
 
Registered: Jul 2013
Distribution: Ubuntu, Mint 13
Posts: 9

Rep: Reputation: Disabled
Ethernet Connection Speed Not Configuring Properly on Dell Optiplex 740 with Ubuntu


Hey guys, I'm having a bit of an issue with my computer. I just recently installed Ubuntu on one of my household computers, and I'm having an issue with my Ethernet Connection. I have broadband internet which is run directly to a 24 Port Ethernet Key, which is in turn connected directly to my Modem. My internet connection is rated at 100 Mbps. When I plug my Ethernet cable into the computer, the connection status says it's connected, but at 1000 Mbps, and the connection does not actually work. I have another computer, a Dell Dimension 8300, which had used that same cable before with no issues.

Any Ideas on how to fix this?

-Cheers!
 
Old 07-21-2013, 08:37 AM   #2
floppy_stuttgart
Member
 
Registered: Nov 2010
Location: Stuttgart, Germany
Distribution: Debian like
Posts: 710
Blog Entries: 2

Rep: Reputation: 68
can you post the content of "dmesg" here?
 
Old 07-21-2013, 11:02 AM   #3
1adog1
LQ Newbie
 
Registered: Jul 2013
Distribution: Ubuntu, Mint 13
Posts: 9

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by floppy_stuttgart View Post
can you post the content of "dmesg" here?
How would I go about getting that? I have no internet connection on the Ubuntu computer and the text files produced by linux can't be read on PC or MAC computers...

-Cheers!

Last edited by 1adog1; 07-21-2013 at 11:34 AM. Reason: Needed more information
 
Old 07-21-2013, 11:39 AM   #4
1adog1
LQ Newbie
 
Registered: Jul 2013
Distribution: Ubuntu, Mint 13
Posts: 9

Original Poster
Rep: Reputation: Disabled
Nevermind, I converted the text file into a windows text file and it's readable here (Sorry in advance for the length):

[ 0.208591] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209452] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.209455] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.209460] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209476] pnp 00:02: [dma 4]
[ 0.209516] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.209572] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.209611] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.209656] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.209749] pnp 00:06: [dma 2]
[ 0.209793] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.210025] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.210321] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.210471] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.210476] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.210712] system 00:0a: [mem 0x000cec00-0x000cffff] has been reserved
[ 0.210716] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.210719] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.210723] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.210727] system 00:0a: [mem 0x77ed0000-0x77efffff] could not be reserved
[ 0.210731] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.210734] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.210738] system 00:0a: [mem 0x00100000-0x77ecffff] could not be reserved
[ 0.210742] system 00:0a: [mem 0x77f00000-0x7fefffff] could not be reserved
[ 0.210745] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.210749] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.210752] system 00:0a: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.210756] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.210760] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.210763] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.210768] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.210778] pnp: PnP ACPI: found 11 devices
[ 0.210780] ACPI: ACPI bus type pnp unregistered
[ 0.218265] pci 0000:00:05.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.218272] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.218275] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.218279] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.218283] pci 0000:00:02.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.218288] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.218291] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff]
[ 0.218294] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.218298] pci 0000:00:03.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.218302] pci 0000:00:04.0: PCI bridge to [bus 03]
[ 0.218305] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.218309] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.218312] pci 0000:00:04.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.218316] pci 0000:00:10.0: PCI bridge to [bus 04]
[ 0.218320] pci 0000:00:10.0: bridge window [io 0x9000-0x9fff]
[ 0.218324] pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.218328] pci 0000:00:10.0: bridge window [mem 0xfda00000-0xfdafffff pref]
[ 0.218344] pci 0000:00:10.0: setting latency timer to 64
[ 0.218349] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.218352] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.218355] pci_bus 0000:00: resource 6 [io 0x8000-0xffff]
[ 0.218358] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
[ 0.218361] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.218364] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
[ 0.218367] pci_bus 0000:00: resource 10 [mem 0xf4000000-0xfe02ffff]
[ 0.218370] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
[ 0.218373] pci_bus 0000:00: resource 12 [io 0x1c00-0x1c80]
[ 0.218376] pci_bus 0000:00: resource 13 [mem 0xfec80000-0xfecbffff]
[ 0.218379] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.218382] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.218385] pci_bus 0000:01: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[ 0.218389] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
[ 0.218391] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.218395] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.218398] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.218401] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.218404] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.218407] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
[ 0.218410] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.218413] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[ 0.218416] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.218419] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.218422] pci_bus 0000:04: resource 6 [io 0x8000-0xffff]
[ 0.218425] pci_bus 0000:04: resource 7 [io 0x03b0-0x03df]
[ 0.218428] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.218431] pci_bus 0000:04: resource 9 [mem 0x80000000-0xefffffff]
[ 0.218434] pci_bus 0000:04: resource 10 [mem 0xf4000000-0xfe02ffff]
[ 0.218437] pci_bus 0000:04: resource 11 [mem 0xfed40000-0xfed44fff]
[ 0.218440] pci_bus 0000:04: resource 12 [io 0x1c00-0x1c80]
[ 0.218443] pci_bus 0000:04: resource 13 [mem 0xfec80000-0xfecbffff]
[ 0.218496] NET: Registered protocol family 2
[ 0.218696] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.218870] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.219004] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.219094] TCP: reno registered
[ 0.219101] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.219131] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.219241] NET: Registered protocol family 1
[ 0.219273] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.219279] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.219322] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.219345] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.219372] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.219381] pci 0000:00:05.0: Boot video device
[ 0.219691] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.288186] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.288255] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.288263] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.288317] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.288325] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.288381] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.288387] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.288446] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.288455] pci 0000:00:10.1: Enabling HT MSI Mapping
[ 0.288472] PCI: CLS 64 bytes, default 64
[ 0.288543] Trying to unpack rootfs image as initramfs...
[ 1.022760] Freeing initrd memory: 31268k freed
[ 1.040338] Simple Boot Flag at 0x3a set to 0x80
[ 1.040628] Initialise module verification
[ 1.040692] audit: initializing netlink socket (disabled)
[ 1.040712] type=2000 audit(1374419557.040:1): initialized
[ 1.077587] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.079624] VFS: Disk quotas dquot_6.5.2
[ 1.079688] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.080426] fuse init (API version 7.20)
[ 1.080539] msgmni has been set to 3744
[ 1.081273] Key type asymmetric registered
[ 1.081276] Asymmetric key parser 'x509' registered
[ 1.081326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.081371] io scheduler noop registered
[ 1.081374] io scheduler deadline registered (default)
[ 1.081383] io scheduler cfq registered
[ 1.081561] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.081652] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[ 1.081726] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 1.081794] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.081813] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.081961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.081967] ACPI: Power Button [PWRB]
[ 1.082035] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.082038] ACPI: Power Button [PWRF]
[ 1.087111] GHES: HEST is not enabled!
[ 1.087234] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.107705] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.109675] Linux agpgart interface v0.103
[ 1.111460] brd: module loaded
[ 1.112446] loop: module loaded
[ 1.112967] libphy: Fixed MDIO Bus: probed
[ 1.113051] tun: Universal TUN/TAP device driver, 1.6
[ 1.113053] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.113125] PPP generic driver version 2.4.2
[ 1.113194] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.113196] ehci-pci: EHCI PCI platform driver
[ 1.113248] ehci-pci 0000:00:0b.1: setting latency timer to 64
[ 1.113252] ehci-pci 0000:00:0b.1: EHCI Host Controller
[ 1.113261] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 1.113274] ehci-pci 0000:00:0b.1: debug port 1
[ 1.113300] ehci-pci 0000:00:0b.1: cache line size of 64 is not supported
[ 1.113330] ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000
[ 1.124031] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.124063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.124066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.124069] usb usb1: Product: EHCI Host Controller
[ 1.124072] usb usb1: Manufacturer: Linux 3.8.0-26-generic ehci_hcd
[ 1.124075] usb usb1: SerialNumber: 0000:00:0b.1
[ 1.124199] hub 1-0:1.0: USB hub found
[ 1.124207] hub 1-0:1.0: 8 ports detected
[ 1.124386] ehci-platform: EHCI generic platform driver
[ 1.124400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.124450] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.124454] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.124463] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 1.124493] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
[ 1.182017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.182020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.182023] usb usb2: Product: OHCI Host Controller
[ 1.182026] usb usb2: Manufacturer: Linux 3.8.0-26-generic ohci_hcd
[ 1.182028] usb usb2: SerialNumber: 0000:00:0b.0
[ 1.182136] hub 2-0:1.0: USB hub found
[ 1.182143] hub 2-0:1.0: 8 ports detected
[ 1.182318] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.182397] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.436330] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.436487] mousedev: PS/2 mouse device common for all mice
[ 1.436654] rtc_cmos 00:03: RTC can wake from S4
[ 1.436807] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.436848] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.436965] device-mapper: uevent: version 1.0.3
[ 1.437055] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 1.437065] cpuidle: using governor ladder
[ 1.437066] cpuidle: using governor menu
[ 1.437070] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.437072] EFI Variables Facility v0.08 2004-May-17
[ 1.437376] ashmem: initialized
[ 1.437531] TCP: cubic registered
[ 1.437656] NET: Registered protocol family 10
[ 1.437884] NET: Registered protocol family 17
[ 1.437897] Key type dns_resolver registered
[ 1.438186] Loading module verification certificates
[ 1.439568] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 28bf685926cf24167b29d0d66d07256be256431c'
[ 1.439592] registered taskstats version 1
[ 1.442973] Key type trusted registered
[ 1.446139] Key type encrypted registered
[ 1.449592] rtc_cmos 00:03: setting system clock to 2013-07-21 15:12:38 UTC (1374419558)
[ 1.449680] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.449680] [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[ 1.449680] [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 1.449718] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.449720] EDD information not available.
[ 1.451882] Freeing unused kernel memory: 996k freed
[ 1.452490] Write protecting the kernel read-only data: 12288k
[ 1.457210] Freeing unused kernel memory: 1172k freed
[ 1.462145] Freeing unused kernel memory: 1080k freed
[ 1.484904] udevd[96]: starting version 175
[ 1.563694] pps_core: LinuxPPS API ver. 1 registered
[ 1.563700] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.570216] PTP clock support registered
[ 1.573201] [drm] Initialized drm 1.1.0 20060810
[ 1.586877] Disabling lock debugging due to kernel taint
[ 1.587596] tg3.c:v3.128 (December 03, 2012)
[ 1.587842] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.607265] Floppy drive(s): fd0 is 1.44M
[ 1.616780] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:18:8b:75:a1:b5
[ 1.616789] tg3 0000:02:00.0 eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.616793] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.616796] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.623961] FDC 0 is a post-1991 82077
[ 1.627297] wmi: Mapper loaded
[ 1.672239] sata_nv 0000:00:0e.0: version 3.5
[ 1.672488] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.672518] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.672583] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.674547] scsi0 : sata_nv
[ 1.674750] scsi1 : sata_nv
[ 1.674824] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
[ 1.674827] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[ 1.675039] nouveau 0000:00:05.0: setting latency timer to 64
[ 1.675246] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 1.675583] nouveau [ DEVICE][0000:00:05.0] BOOT0 : 0x04e000a2
[ 1.675587] nouveau [ DEVICE][0000:00:05.0] Chipset: C51 (NV4E)
[ 1.675589] nouveau [ DEVICE][0000:00:05.0] Family : NV40
[ 1.676702] nouveau [ VBIOS][0000:00:05.0] checking PRAMIN for image...
[ 1.712645] nouveau [ VBIOS][0000:00:05.0] ... appears to be valid
[ 1.712648] nouveau [ VBIOS][0000:00:05.0] using image from PRAMIN
[ 1.712850] nouveau [ VBIOS][0000:00:05.0] BIT signature found
[ 1.712854] nouveau [ VBIOS][0000:00:05.0] version 05.51.28.50.18
[ 1.713531] nouveau [ PFB][0000:00:05.0] RAM type: stolen system memory
[ 1.713537] nouveau [ PFB][0000:00:05.0] RAM size: 128 MiB
[ 1.713539] nouveau [ PFB][0000:00:05.0] ZCOMP: 0 tags
[ 1.888037] usb 2-3: new low-speed USB device number 2 using ohci_hcd
[ 2.102042] usb 2-3: New USB device found, idVendor=045e, idProduct=00cb
[ 2.102045] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.102049] usb 2-3: Product: Microsoft Basic Optical Mouse v2.0
[ 2.102051] usb 2-3: Manufacturer: Microsoft
[ 2.123329] usbcore: registered new interface driver usbhid
[ 2.123334] usbhid: USB HID core driver
[ 2.128369] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input2
[ 2.128644] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:0b.0-3/input0
[ 2.140052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.148539] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[ 2.148543] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.164515] ata1.00: configured for UDMA/133
[ 2.164658] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[ 2.164884] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.164888] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.164938] sd 0:0:0:0: [sda] Write Protect is off
[ 2.164941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.164964] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.165240] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.193589] sda: sda1 sda2 < sda5 >
[ 2.193931] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.284027] usb 2-8: new low-speed USB device number 3 using ohci_hcd
[ 2.501042] usb 2-8: New USB device found, idVendor=045e, idProduct=0750
[ 2.501045] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.501048] usb 2-8: Product: Wired Keyboard 600
[ 2.501050] usb 2-8: Manufacturer: Microsoft
[ 2.512421] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.0/input/input3
[ 2.512516] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:0b.0-8/input0
[ 2.525217] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.1/input/input4
[ 2.525399] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:0b.0-8/input1
[ 2.632051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.656261] ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX310S, VDK2, max UDMA/100
[ 2.688244] ata2.00: configured for UDMA/100
[ 2.691274] scsi 1:0:0:0: CD-ROM SONY CDRWDVD CRX310S VDK2 PQ: 0 ANSI: 5
[ 2.693832] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.693835] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.693951] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.694026] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.004126] [TTM] Zone kernel: Available graphics memory: 960200 kiB
[ 3.004129] [TTM] Initializing pool allocator
[ 3.004134] [TTM] Initializing DMA pool allocator
[ 3.004438] nouveau [ DRM] VRAM: 125 MiB
[ 3.004445] nouveau [ DRM] GART: 512 MiB
[ 3.004450] nouveau [ DRM] BIT BIOS found
[ 3.004454] nouveau [ DRM] Bios version 05.51.28.50
[ 3.004458] nouveau [ DRM] TMDS table version 1.1
[ 3.004460] nouveau W[ DRM] TMDS table script pointers not stubbed
[ 3.004463] nouveau [ DRM] DCB version 3.0
[ 3.004466] nouveau [ DRM] DCB outp 00: 02000300 00000023
[ 3.004469] nouveau [ DRM] DCB outp 01: 03011312 00000000
[ 3.004472] nouveau [ DRM] DCB conn 00: 0000
[ 3.004475] nouveau [ DRM] DCB conn 01: 0131
[ 3.004477] nouveau [ DRM] DCB conn 02: 0210
[ 3.004480] nouveau [ DRM] DCB conn 03: 0211
[ 3.004482] nouveau [ DRM] DCB conn 04: 0213
[ 3.005629] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.005633] [drm] No driver support for vblank timestamp query.
[ 3.005732] nouveau [ DRM] 0xD1A9: Parsing digital output script table
[ 3.055762] nouveau [ DRM] 1 available performance level(s)
[ 3.055767] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 3.055770] nouveau [ DRM] c:
[ 3.057325] nouveau [ DRM] MM: using M2MF for buffer copies
[ 3.120184] nouveau [ DRM] allocated 1600x900 fb: 0x9000, bo ffff880035663c00
[ 3.120318] fbcon: nouveaufb (fb0) is primary device
[ 3.130703] Console: switching to colour frame buffer device 200x56
[ 3.132429] nouveau 0000:00:05.0: fb0: nouveaufb frame buffer device
[ 3.132432] nouveau 0000:00:05.0: registered panic notifier
[ 3.132443] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:05.0 on minor 0
[ 3.132869] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 3.132916] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 3.133014] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 3.133841] scsi2 : sata_nv
[ 3.134721] scsi3 : sata_nv
[ 3.134843] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
[ 3.134847] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
[ 3.448036] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.760030] ata4: SATA link down (SStatus 0 SControl 300)
[ 10.830056] bio: create slab <bio-1> at 1
[ 11.051974] bio: create slab <bio-1> at 1
[ 11.556253] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 11.556260] EXT4-fs (dm-1): write access will be enabled during recovery
[ 12.294326] EXT4-fs (dm-1): orphan cleanup on readonly fs
[ 12.294348] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170457
[ 12.294494] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170454
[ 12.294512] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170453
[ 12.294528] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170452
[ 12.294545] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170451
[ 12.294564] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170450
[ 12.294586] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 525628
[ 12.294607] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 524619
[ 12.294650] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170447
[ 12.294669] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170446
[ 12.294687] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170445
[ 12.294704] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170444
[ 12.294737] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 17170443
[ 12.294755] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 525837
[ 12.294772] EXT4-fs (dm-1): 14 orphan inodes deleted
[ 12.294774] EXT4-fs (dm-1): recovery complete
[ 12.405541] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.591061] Adding 1961980k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:1961980k
[ 20.661983] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.721021] udevd[484]: starting version 175
[ 20.918765] i2c i2c-3: nForce2 SMBus adapter at 0x1c00
[ 20.918806] i2c i2c-4: nForce2 SMBus adapter at 0x1c40
[ 20.925953] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 20.926109] nv_tco: Watchdog reboot detected
[ 20.926207] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 20.934370] lp: driver loaded but no devices found
[ 20.958059] MCE: In-kernel MCE decoding enabled.
[ 20.988264] EDAC MC: Ver: 3.0.0
[ 20.990394] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 20.993653] AMD64 EDAC driver v3.4.0
[ 20.993708] EDAC amd64: DRAM ECC disabled.
[ 20.993715] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 20.993715] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 20.993715] (Note that use of the override may cause unknown side effects.)
[ 21.004209] parport_pc 00:08: reported by Plug and Play ACPI
[ 21.004245] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 21.015046] type=1400 audit(1374419578.060:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=561 comm="apparmor_parser"
[ 21.015642] type=1400 audit(1374419578.060:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=561 comm="apparmor_parser"
[ 21.015963] type=1400 audit(1374419578.060:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=561 comm="apparmor_parser"
[ 21.100845] lp0: using parport0 (interrupt-driven).
[ 21.189916] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 21.189927] hda_intel: Disabling MSI
[ 21.189967] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[ 21.192576] microcode: AMD CPU family 0xf not supported
[ 21.213593] microcode: AMD CPU family 0xf not supported
[ 21.225757] kvm: Nested Virtualization enabled
[ 21.299091] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 21.409889] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 21.485679] ppdev: user-space parallel port driver
[ 21.824145] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input5
[ 21.824256] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input6
[ 21.824338] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input7
[ 21.824407] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[ 25.221609] init: failsafe main process (987) killed by TERM signal
[ 25.381587] Bluetooth: Core ver 2.16
[ 25.381629] NET: Registered protocol family 31
[ 25.381631] Bluetooth: HCI device and connection manager initialized
[ 25.385147] Bluetooth: HCI socket layer initialized
[ 25.385155] Bluetooth: L2CAP socket layer initialized
[ 25.385167] Bluetooth: SCO socket layer initialized
[ 25.391639] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.391645] Bluetooth: BNEP filters: protocol multicast
[ 25.391662] Bluetooth: BNEP socket layer initialized
[ 25.396750] Bluetooth: RFCOMM TTY layer initialized
[ 25.396771] Bluetooth: RFCOMM socket layer initialized
[ 25.396773] Bluetooth: RFCOMM ver 1.11
[ 25.409859] type=1400 audit(1374419582.456:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1085 comm="apparmor_parser"
[ 25.409969] type=1400 audit(1374419582.456:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1086 comm="apparmor_parser"
[ 25.410314] type=1400 audit(1374419582.456:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1085 comm="apparmor_parser"
[ 25.410426] type=1400 audit(1374419582.456:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1086 comm="apparmor_parser"
[ 25.414735] type=1400 audit(1374419582.460:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1088 comm="apparmor_parser"
[ 25.415620] type=1400 audit(1374419582.460:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1088 comm="apparmor_parser"
[ 25.415949] type=1400 audit(1374419582.460:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1088 comm="apparmor_parser"
[ 25.829569] init: avahi-cups-reload main process (1165) terminated with status 1
[ 27.235093] tg3 0000:02:00.0: irq 43 for MSI/MSI-X
[ 27.273364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.278520] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.379899] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 30.379906] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 30.379925] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.818974] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 32.836393] ISO 9660 Extensions: RRIP_1991A
starsty@starsty-OptiPlex-740:~$
 
Old 07-21-2013, 04:57 PM   #5
btmiller
Senior Member
 
Registered: May 2004
Location: In the DC 'burbs
Distribution: Arch, Scientific Linux, Debian, Ubuntu
Posts: 4,275

Rep: Reputation: 370Reputation: 370Reputation: 370Reputation: 370
I don't think that posting dmesg is going to provide much of a clue, other than to show us that your Ethernet card is detecting a 1000 Mbps full duplex speed. Probably, the 24 port switch (there's no such thing called an "Ethernet key" that I know of) is set to run a 1000 Mbps even though the Internet uplink is only 100 Mbps. This is not uncommon.

What is the output of "ifconfig eth0"? ... This will tell you if your machine is getting an IP address. If it is not, how are IP addresses assigned on your network? Via DHCP? Statically? If you do have an IP address, cabn you ping other computers on your own network? If so, try pinging some an IP on the Internet (e.g. 74.125.228.52 which is what www.google.com resolves to on my system). If you can ping Intenret hosts via IP, then probably your DNS settings are messed up and you cannot resolve names.

In summary, here is a step by step checklist for how to troubleshoot problems like this:

1. Check that your Eternet interface is recognized in Linux using "ifconfig".
2. Check that your IP address, netmask, and gateway settings are correct for your network (IP address and netmask are found in the output of ifconfig, "route -n" can tell you your gateway settings.
3. Check that you can ping another host on your subnet *and* your default gateway.
4. Check that you can ping some host not on your network.
5. Check that yourt DNS name servers are set up correctly in /etc/resolv.conf.

If you work through each level of check methodologically, you will eventually find the problem. Once you have, post back here and we can suggest how to fix it.
 
Old 07-21-2013, 09:12 PM   #6
1adog1
LQ Newbie
 
Registered: Jul 2013
Distribution: Ubuntu, Mint 13
Posts: 9

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by btmiller View Post
I don't think that posting dmesg is going to provide much of a clue, other than to show us that your Ethernet card is detecting a 1000 Mbps full duplex speed. Probably, the 24 port switch (there's no such thing called an "Ethernet key" that I know of) is set to run a 1000 Mbps even though the Internet uplink is only 100 Mbps. This is not uncommon.

What is the output of "ifconfig eth0"? ... This will tell you if your machine is getting an IP address. If it is not, how are IP addresses assigned on your network? Via DHCP? Statically? If you do have an IP address, cabn you ping other computers on your own network? If so, try pinging some an IP on the Internet (e.g. 74.125.228.52 which is what www.google.com resolves to on my system). If you can ping Intenret hosts via IP, then probably your DNS settings are messed up and you cannot resolve names.

In summary, here is a step by step checklist for how to troubleshoot problems like this:

1. Check that your Eternet interface is recognized in Linux using "ifconfig".
2. Check that your IP address, netmask, and gateway settings are correct for your network (IP address and netmask are found in the output of ifconfig, "route -n" can tell you your gateway settings.
3. Check that you can ping another host on your subnet *and* your default gateway.
4. Check that you can ping some host not on your network.
5. Check that yourt DNS name servers are set up correctly in /etc/resolv.conf.

If you work through each level of check methodologically, you will eventually find the problem. Once you have, post back here and we can suggest how to fix it.
Ok Here we go:

1. Here is the result of ifconfig eth0:

eth0 Link encap:Ethernet
HWaddr 00:18:8b:75:a1:b5
inet addr:169.254.9.155
Bcast:169.254.255.255
Mask:255.255.0.0
inet6 addr: fe80::218:8bff:fe75:a1b5/64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:827 errors:0 dropped:0 overruns:0 frame:0
TX packets:925 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:176408 (176.4 KB) TX bytes:156810 (156.8 KB)
Interrupt:16

2. Here is the result of route -n

169.254.0.0 0.0.0.0 255.255.0.0 U 1 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
224.0.0.0 0.0.0.0 240.0.0.0 U 0 0 0 eth0

3. No, I can not ping another host or my default gateway


4. No, I can not ping another host.

5. Yes, it all looks good.

Oh, and that switch has a small display on the side with 24 led lights. If the light is green, it's a 1000 mbps connection, and if it's orange, it's a 100 mbps connection. It will automatically detect what's an input and what's an output. The led that reads my room is green, all the others are orange. Hope this helps!

Last edited by 1adog1; 07-23-2013 at 12:55 AM.
 
Old 07-27-2013, 06:04 PM   #7
btmiller
Senior Member
 
Registered: May 2004
Location: In the DC 'burbs
Distribution: Arch, Scientific Linux, Debian, Ubuntu
Posts: 4,275

Rep: Reputation: 370Reputation: 370Reputation: 370Reputation: 370
Sorry for the late reply -- extremely busy week. Have you resolved this yet?

Looking at your output, you do not have a valid IP address for your host (169.254.x.x IPs are defaults assigned when a DHCP client can't lease an address from a server). Do you have a DHCP server running on your network? If not, you'll need to assign the machine a static IP and edit /etc/sysconfig/network (at least on Debian-based systems) to have the correct statis settings. Are you the administrator of this network? If not, it might be time to go talk to whoever is responsible for it and see if (a) the DHCP server is borked or (b) what static IP settings you should use.
 
Old 07-28-2013, 12:17 PM   #8
1adog1
LQ Newbie
 
Registered: Jul 2013
Distribution: Ubuntu, Mint 13
Posts: 9

Original Poster
Rep: Reputation: Disabled
Ah, that's interesting, my other computer detects a DHCP server address when it's connected, this one does not. It may also help to know that the computer came from a company that had it configured to aT1 or 1Gbps connection.When I enter a static IP address it SAYS it's connected, but it doesn't actually work. Network admin's my dad, and he says the connection does have an open DHCP server. All other computers in the house connect to the connection without any issues using the DHCP. Is there any way to change the configuration from a 1 Gbps connection to a 100 Mbps connection? I've put a linksys wireless card in the computer as a temporary fix, but the connection's slow.

-Cheers!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with graphic optiplex 740 ubuntu 9.10 64bit luke08 Linux - Desktop 2 12-13-2009 02:03 AM
Dell Optiplex GX260 need to get onboard video and ethernet JosephS Linux - Hardware 5 11-10-2009 04:18 PM
Ubuntu Hardy 8.04 and Dell Optiplex 745 rahmathullakm Linux - Hardware 1 08-01-2008 01:11 AM
trouble configuring networking RHEL4 dell optiplex 280 philosophia Linux - Hardware 2 06-16-2006 10:48 AM
Configuring sound in a Dell Optiplex GX270 with RH 7.3: one solution mauro_haller Linux - Hardware 2 03-04-2006 05:02 PM


All times are GMT -5. The time now is 06:07 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration