LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 03-08-2010, 06:20 PM   #1
shoop da whoop king
LQ Newbie
 
Registered: Mar 2010
Posts: 5

Rep: Reputation: 0
Error mounting: mount exited with exit code 1


I am very new to the linux community and installed Ubuntu 9.10 desktop on my EEE 701SD. I installed it via a usb flash drive boot. However once I had installed on my EEE pc I formated the flash drive. But then the next time I inserted the flash drive it came up with an error. It said:


Unable to mount 1.0 GB filesystem

Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/
sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so



I dont know what to do now and cant usb use flash drives.
Any help appreciated. Thanks
 
Old 03-08-2010, 06:27 PM   #2
jamescondron
Member
 
Registered: Jul 2007
Location: Scunthorpe, UK
Distribution: Ubuntu 8.10; Gentoo; Debian Lenny
Posts: 961

Rep: Reputation: 69
Do any others work? Did you format it and put a filesystem on it? What does
Code:
sudo fdisk -l /dev/sdb
give?
 
Old 03-09-2010, 05:48 PM   #3
shoop da whoop king
LQ Newbie
 
Registered: Mar 2010
Posts: 5

Original Poster
Rep: Reputation: 0
i ve tried with multiple flash sticks and none worked, i tried the command:

sudo fdisk -l /dev/sdb

but the error message still comes wen i try to use it.
 
Old 03-09-2010, 05:49 PM   #4
jamescondron
Member
 
Registered: Jul 2007
Location: Scunthorpe, UK
Distribution: Ubuntu 8.10; Gentoo; Debian Lenny
Posts: 961

Rep: Reputation: 69
Okay, no problem. Plug one in now and do us the output of
Code:
dmesg|tail -15
 
Old 03-09-2010, 06:48 PM   #5
shoop da whoop king
LQ Newbie
 
Registered: Mar 2010
Posts: 5

Original Poster
Rep: Reputation: 0
i tried that as well and it came up with the error message:

UDF-fs: No anchor found
[17101.640736] UDF-fs: Rescanning with blocksize 2048
[17101.656976] UDF-fs: No anchor found
[17101.656984] UDF-fs: No partition found (1)
[17101.691600] ISOFS: Unable to identify CD-ROM format.
 
Old 03-09-2010, 07:29 PM   #6
jamescondron
Member
 
Registered: Jul 2007
Location: Scunthorpe, UK
Distribution: Ubuntu 8.10; Gentoo; Debian Lenny
Posts: 961

Rep: Reputation: 69
Isn't UDF an independent system for CDs and DVDs? and the error with ISOFS.
And you still haven't given me the output for the fdisk command
 
Old 03-10-2010, 05:23 PM   #7
shoop da whoop king
LQ Newbie
 
Registered: Mar 2010
Posts: 5

Original Poster
Rep: Reputation: 0
okay sorry about that,
i tried the fdisk command and it came up with this:
Usage: fdisk [-l] [-b SSZ] [-u] device
E.g.: fdisk /dev/hda (for the first IDE disk)
or: fdisk /dev/sdc (for the third SCSI disk)
or: fdisk /dev/eda (for the first PS/2 ESDI drive)
or: fdisk /dev/rd/c0d0 or: fdisk /dev/ida/c0d0 (for RAID devices)
 
Old 03-10-2010, 05:35 PM   #8
jamescondron
Member
 
Registered: Jul 2007
Location: Scunthorpe, UK
Distribution: Ubuntu 8.10; Gentoo; Debian Lenny
Posts: 961

Rep: Reputation: 69
Well okay, thats an error message, you did the command wrong.

Plug the USB stick in, and then do
Code:
dmesg|tail
A line like:
Code:
Mar 10 22:32:10 jcmain kernel: [1033628.941538] sd 11:0:0:0: [sdc] Attached SCSI removable disk
tells us that the new device is sdc, so we do

Code:
root@jcmain:~# fdisk -l /dev/sdc

Disk /dev/sdc: 1023 MB, 1023410176 bytes
2 heads, 63 sectors/track, 15863 cylinders
Units = cylinders of 126 * 512 = 64512 bytes
Disk identifier: 0x015462ea

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1       15863      999337+  83  Linux
- So try it as such, of course replacing sdc with whatever device you get
 
Old 03-15-2010, 03:32 PM   #9
shoop da whoop king
LQ Newbie
 
Registered: Mar 2010
Posts: 5

Original Poster
Rep: Reputation: 0
when i typed in: dmesg|tail
it came up with: sd 2:0:0:0: [sdb] Assuming drive cache: write through.
So i typed in: fdisk -l /dev/sdb
It said: Cannot open /dev/sdb
Still unsure of what is wrong but i suspect it could be problem with: /dev/sdb
 
Old 03-07-2011, 01:50 PM   #10
amirishere
LQ Newbie
 
Registered: Mar 2011
Posts: 2

Rep: Reputation: 0
Same Prob here, albeit on debian

I am posting here as this was the most relevant hi ranking google result. Double clicking my 2 gig flash drive gives me:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

$ dmesg | tail // gives me:
[ 1927.453332] UDF-fs: No anchor found
[ 1927.453340] UDF-fs: Rescanning with blocksize 2048
[ 1927.685349] UDF-fs: No anchor found
[ 1927.685356] UDF-fs: No partition found (1)
[ 1928.277310] ISOFS: Unable to identify CD-ROM format.
[ 2175.339092] UDF-fs: No anchor found
[ 2175.339100] UDF-fs: Rescanning with blocksize 2048
[ 2175.563060] UDF-fs: No anchor found
[ 2175.563067] UDF-fs: No partition found (1)
[ 2176.163047] ISOFS: Unable to identify CD-ROM format.

and the second half of the dmesg output is at the very end of the post (from where the usbs start).

and I get:
root@Amir:/home/amir# fdisk -l /dev/sdb

Disk /dev/sdb: 2019 MB, 2019557376 bytes
19 heads, 18 sectors/track, 11533 cylinders
Units = cylinders of 342 * 512 = 175104 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/sdb1 24 11534 1968128 b W95 FAT32


I can mount with:
mount /dev/sdb1 /mnt/usb

but I'd like to get this auto mount thing going.





[ 2.411088] FDC 0 is a post-1991 82077
[ 2.541097] usbcore: registered new interface driver usbfs
[ 2.541579] usbcore: registered new interface driver hub
[ 2.542108] usbcore: registered new device driver usb
[ 2.548215] SCSI subsystem initialized
[ 2.575462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.575533] alloc irq_desc for 23 on node -1
[ 2.575537] alloc kstat_irqs on node -1
[ 2.575916] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.575966] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 2.576087] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 2.576141] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[ 2.577625] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfdffc000
[ 2.589043] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 2.589109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.589114] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.589117] usb usb1: Product: EHCI Host Controller
[ 2.589120] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.589122] usb usb1: SerialNumber: 0000:00:03.3
[ 2.589289] usb usb1: configuration #1 chosen from 1 choice
[ 2.589351] hub 1-0:1.0: USB hub found
[ 2.589368] hub 1-0:1.0: 8 ports detected
[ 2.591168] fan PNP0C0B:00: registered as cooling_device0
[ 2.591183] ACPI: Fan [FAN] (on)
[ 2.593221] sis190 Gigabit Ethernet driver 1.3 loaded.
[ 2.593264] alloc irq_desc for 19 on node -1
[ 2.593268] alloc kstat_irqs on node -1
[ 2.593651] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.593683] sis190 0000:00:04.0: setting latency timer to 64
[ 2.593716] 0000:00:04.0: Read MAC address from EEPROM
[ 2.595596] libata version 3.00 loaded.
[ 2.654031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.680021] 0000:00:04.0: Broadcom PHY AC131 transceiver at address 1.
[ 3.176015] 0000:00:04.0: Using transceiver at address 1 as default.
[ 3.208934] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc9001066a000 (IRQ: 19), 00:15:58:aa:21:be
[ 3.208939] eth0: GMII mode.
[ 3.208953] eth0: Enabling Auto-negotiation.
[ 3.240057] pata_sis 0000:00:02.5: version 0.5.2
[ 3.240088] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.245399] scsi0 : pata_sis
[ 3.245848] scsi1 : pata_sis
[ 3.247243] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 3.247249] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 3.247380] alloc irq_desc for 20 on node -1
[ 3.247385] alloc kstat_irqs on node -1
[ 3.247764] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.247816] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 3.247854] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 3.249415] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfdfff000
[ 3.306047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.306052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.306056] usb usb2: Product: OHCI Host Controller
[ 3.306058] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 3.306061] usb usb2: SerialNumber: 0000:00:03.0
[ 3.306387] usb usb2: configuration #1 chosen from 1 choice
[ 3.306595] hub 2-0:1.0: USB hub found
[ 3.306623] hub 2-0:1.0: 3 ports detected
[ 3.306780] alloc irq_desc for 21 on node -1
[ 3.306785] alloc kstat_irqs on node -1
[ 3.307166] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.307218] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 3.307256] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 3.308791] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfdffe000
[ 3.366051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.366056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.366059] usb usb3: Product: OHCI Host Controller
[ 3.366062] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 3.366064] usb usb3: SerialNumber: 0000:00:03.1
[ 3.366403] usb usb3: configuration #1 chosen from 1 choice
[ 3.366594] hub 3-0:1.0: USB hub found
[ 3.366620] hub 3-0:1.0: 3 ports detected
[ 3.367299] alloc irq_desc for 22 on node -1
[ 3.367305] alloc kstat_irqs on node -1
[ 3.367684] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 3.367738] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 3.367778] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 3.369320] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfdffd000
[ 3.426052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.426058] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.426062] usb usb4: Product: OHCI Host Controller
[ 3.426064] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 3.426067] usb usb4: SerialNumber: 0000:00:03.2
[ 3.426403] usb usb4: configuration #1 chosen from 1 choice
[ 3.426609] hub 4-0:1.0: USB hub found
[ 3.426635] hub 4-0:1.0: 2 ports detected
[ 3.565505] sata_sis 0000:00:05.0: version 1.0
[ 3.565539] alloc irq_desc for 17 on node -1
[ 3.565543] alloc kstat_irqs on node -1
[ 3.565923] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.565940] sata_sis 0000:00:05.0: Detected SiS 182/965 chipset
[ 3.569460] scsi2 : sata_sis
[ 3.570824] scsi3 : sata_sis
[ 3.571199] ata3: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xf800 irq 17
[ 3.571206] ata4: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf808 irq 17
[ 3.680028] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 3.892035] usb 2-1: New USB device found, idVendor=058f, idProduct=9254
[ 3.892040] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.892044] usb 2-1: Product: Generic USB Hub
[ 3.892046] usb 2-1: Manufacturer: ALCOR
[ 3.892231] usb 2-1: configuration #1 chosen from 1 choice
[ 3.895160] hub 2-1:1.0: USB hub found
[ 3.898041] hub 2-1:1.0: 4 ports detected
[ 4.218795] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 4.218809] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 4.220040] usb 2-1.2: new low speed USB device using ohci_hcd and address 3
[ 4.330035] usb 2-1.2: New USB device found, idVendor=04b4, idProduct=0033
[ 4.330040] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.330220] usb 2-1.2: configuration #1 chosen from 1 choice
[ 4.410036] usb 2-1.4: new low speed USB device using ohci_hcd and address 4
[ 4.518036] usb 2-1.4: New USB device found, idVendor=0566, idProduct=3107
[ 4.518042] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.518218] usb 2-1.4: configuration #1 chosen from 1 choice
[ 4.533947] usbcore: registered new interface driver hiddev
[ 4.542602] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
[ 4.543062] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:03.0-1.2/input0
[ 4.550611] input: HID 0566:3107 as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input2
[ 4.550892] generic-usb 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:03.0-1.4/input0
[ 4.562399] input: HID 0566:3107 as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input3
[ 4.562658] generic-usb 0003:0566:3107.0003: input,hidraw2: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:03.0-1.4/input1
[ 4.562740] usbcore: registered new interface driver usbhid
[ 4.563204] usbhid: v2.6:USB HID core driver
[ 4.856046] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.856060] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 4.904817] ata4.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
[ 4.904823] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.988128] ata4.00: configured for UDMA/133
[ 4.988333] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[ 5.017291] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.017389] sd 3:0:0:0: [sda] Write Protect is off
[ 5.017393] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.017429] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.017720] sda: sda1 < sda5 sda6 sda7 > sda2
[ 5.079682] sd 3:0:0:0: [sda] Attached SCSI disk
[ 5.568339] PM: Starting manual resume from disk
[ 5.568346] PM: Resume from partition 8:7
[ 5.568349] PM: Checking hibernation image.
[ 5.579110] PM: Error -22 checking image file
[ 5.579115] PM: Resume from disk failed.
[ 5.627981] kjournald starting. Commit interval 5 seconds
[ 5.628029] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.062961] udev[289]: starting version 164
[ 8.595020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 8.595034] ACPI: Power Button [PWRB]
[ 8.595167] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.595175] ACPI: Power Button [PWRF]
[ 8.605007] processor LNXCPU:00: registered as cooling_device1
[ 8.858363] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.873282] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.873342] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.060033] nvidia: module license 'NVIDIA' taints kernel.
[ 10.060041] Disabling lock debugging due to kernel taint
[ 10.878321] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.878339] nvidia 0000:01:00.0: setting latency timer to 64
[ 10.878347] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=nonewns=io+mem
[ 10.879318] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.31 Thu Jun 3 08:19:50 PDT 2010
[ 11.565781] alloc irq_desc for 18 on node -1
[ 11.565787] alloc kstat_irqs on node -1
[ 11.566168] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.892037] intel8x0_measure_ac97_clock: measured 55940 usecs (2691 samples)
[ 11.892043] intel8x0: clocking to 48000
[ 12.930536] Adding 2000888k swap on /dev/sda7. Priority:-1 extents:1 across:2000888k
[ 13.122414] EXT3 FS on sda6, internal journal
[ 13.339423] loop: module loaded
[ 14.760245] fuse init (API version 7.13)
[ 16.461271] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 16.461279] vboxdrv: Successfully done.
[ 16.461283] vboxdrv: Found 1 processor cores.
[ 16.462346] VBoxDrv: dbg - g_abExecMemory=ffffffffa0e036c0
[ 16.463785] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 16.463792] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
[ 18.702282] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.979784] Bluetooth: Core ver 2.15
[ 20.979915] NET: Registered protocol family 31
[ 20.979919] Bluetooth: HCI device and connection manager initialized
[ 20.979923] Bluetooth: HCI socket layer initialized
[ 21.250386] Bluetooth: L2CAP ver 2.14
[ 21.250393] Bluetooth: L2CAP socket layer initialized
[ 21.394301] Bluetooth: RFCOMM TTY layer initialized
[ 21.394310] Bluetooth: RFCOMM socket layer initialized
[ 21.394313] Bluetooth: RFCOMM ver 1.11
[ 21.519141] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.519147] Bluetooth: BNEP filters: protocol multicast
[ 21.600883] Bridge firewalling registered
[ 21.732257] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.732263] Bluetooth: SCO socket layer initialized
[ 23.339805] lp0: using parport0 (interrupt-driven).
[ 23.500689] ppdev: user-space parallel port driver
[ 28.732032] eth0: mii ext = 000b.
[ 28.756024] eth0: mii lpa=45e1 adv=01e1 exp=0007.
[ 28.756030] eth0: link on 100 Mbps Full Duplex mode.
[ 28.756240] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.164019] eth0: no IPv6 routers present
[ 801.109680] usb 2-1.1: new full speed USB device using ohci_hcd and address 5
[ 801.208674] usb 2-1.1: not running at top speed; connect to a high speed hub
[ 801.226676] usb 2-1.1: New USB device found, idVendor=058f, idProduct=6387
[ 801.226681] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 801.226685] usb 2-1.1: Product: Mass Storage Device
[ 801.226688] usb 2-1.1: Manufacturer: JetFlash
[ 801.226690] usb 2-1.1: SerialNumber: C58V8HQX
[ 801.228741] usb 2-1.1: configuration #1 chosen from 1 choice
[ 801.289281] Initializing USB Mass Storage driver...
[ 801.289490] scsi4 : SCSI emulation for USB Mass Storage devices
[ 801.289887] usbcore: registered new interface driver usb-storage
[ 801.289894] USB Mass Storage support registered.
[ 801.294818] usb-storage: device found at 5
[ 801.294824] usb-storage: waiting for device to settle before scanning
[ 806.293700] usb-storage: device scan complete
[ 806.300696] scsi 4:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2
[ 806.324654] sd 4:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB)
[ 806.331664] sd 4:0:0:0: [sdb] Write Protect is off
[ 806.331671] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 806.331675] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 806.364643] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 806.364656] sdb: sdb1
[ 806.485679] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 806.485690] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 808.921644] UDF-fs: No anchor found
[ 808.921651] UDF-fs: Rescanning with blocksize 2048
[ 809.145630] UDF-fs: No anchor found
[ 809.145637] UDF-fs: No partition found (1)
[ 809.775614] ISOFS: Unable to identify CD-ROM format.
[ 815.088575] UDF-fs: No anchor found
[ 815.088583] UDF-fs: Rescanning with blocksize 2048
[ 815.312594] UDF-fs: No anchor found
[ 815.312600] UDF-fs: No partition found (1)
[ 815.912602] ISOFS: Unable to identify CD-ROM format.
[ 827.245475] UDF-fs: No anchor found
[ 827.245483] UDF-fs: Rescanning with blocksize 2048
[ 827.469461] UDF-fs: No anchor found
[ 827.469467] UDF-fs: No partition found (1)
[ 828.069448] ISOFS: Unable to identify CD-ROM format.
[ 828.338527] UDF-fs: No anchor found
[ 828.338535] UDF-fs: Rescanning with blocksize 2048
[ 828.562462] UDF-fs: No anchor found
[ 828.562469] UDF-fs: No partition found (1)
[ 829.154438] ISOFS: Unable to identify CD-ROM format.
[ 865.227132] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 879.008997] UDF-fs: No anchor found
[ 879.009005] UDF-fs: Rescanning with blocksize 2048
[ 879.232985] UDF-fs: No anchor found
[ 879.232991] UDF-fs: No partition found (1)
[ 879.832972] ISOFS: Unable to identify CD-ROM format.
[ 881.253019] UDF-fs: No anchor found
[ 881.253027] UDF-fs: Rescanning with blocksize 2048
[ 881.476965] UDF-fs: No anchor found
[ 881.476973] UDF-fs: No partition found (1)
[ 882.076952] ISOFS: Unable to identify CD-ROM format.
[ 1024.924661] UDF-fs: No anchor found
[ 1024.924668] UDF-fs: Rescanning with blocksize 2048
[ 1025.148646] UDF-fs: No anchor found
[ 1025.148652] UDF-fs: No partition found (1)
[ 1025.748636] ISOFS: Unable to identify CD-ROM format.
[ 1343.724725] UDF-fs: No anchor found
[ 1343.724732] UDF-fs: Rescanning with blocksize 2048
[ 1343.948708] UDF-fs: No anchor found
[ 1343.948715] UDF-fs: No partition found (1)
[ 1344.540678] ISOFS: Unable to identify CD-ROM format.
[ 1674.083692] UDF-fs: No anchor found
[ 1674.083700] UDF-fs: Rescanning with blocksize 2048
[ 1674.307675] UDF-fs: No anchor found
[ 1674.307683] UDF-fs: No partition found (1)
[ 1674.899644] ISOFS: Unable to identify CD-ROM format.
[ 1679.659614] UDF-fs: No anchor found
[ 1679.659621] UDF-fs: Rescanning with blocksize 2048
[ 1679.883665] UDF-fs: No anchor found
[ 1679.883672] UDF-fs: No partition found (1)
[ 1680.475592] ISOFS: Unable to identify CD-ROM format.
[ 1927.453332] UDF-fs: No anchor found
[ 1927.453340] UDF-fs: Rescanning with blocksize 2048
[ 1927.685349] UDF-fs: No anchor found
[ 1927.685356] UDF-fs: No partition found (1)
[ 1928.277310] ISOFS: Unable to identify CD-ROM format.
[ 2175.339092] UDF-fs: No anchor found
[ 2175.339100] UDF-fs: Rescanning with blocksize 2048
[ 2175.563060] UDF-fs: No anchor found
[ 2175.563067] UDF-fs: No partition found (1)
[ 2176.163047] ISOFS: Unable to identify CD-ROM format.
 
Old 05-02-2011, 12:26 AM   #11
smeezekitty
Senior Member
 
Registered: Sep 2009
Location: Washington U.S.
Distribution: M$ Windows / Debian / Ubuntu / DSL / many others
Posts: 2,234

Rep: Reputation: 184Reputation: 184
^^ You bumped an old thread.
Also when posting dmesg output, enclose it in [code] tags.
 
Old 05-08-2011, 01:41 PM   #12
amirishere
LQ Newbie
 
Registered: Mar 2011
Posts: 2

Rep: Reputation: 0
solved for me

Oh, thank you. Will try to be more careful next time. Anyway, this was solved and the problem was a faulty cd with some sort of copy prevention scheme. The CD wouldn't auto mount, and all other stuff were stuck behind it.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
mount : mount error 2 mounting ext 3 Pivotroot: pivot_root(/sysroot,/sy TONYSUCCAR Linux - Enterprise 3 09-07-2009 06:08 AM
Need advice...code structure for exit from error in c ? hottdogg Programming 8 07-05-2008 03:50 AM
Program exited with code 01. nasim751 Programming 1 01-30-2008 11:00 AM
pppd options error (exit code 2) NiallC Linux - Hardware 3 02-10-2003 02:47 AM


All times are GMT -5. The time now is 03:55 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration