LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Newbie (https://www.linuxquestions.org/questions/linux-newbie-8/)
-   -   Driver "fglrx" for "ATI Cedar Pro HD 5450/6350" slow; how to make it quicker? (https://www.linuxquestions.org/questions/linux-newbie-8/driver-fglrx-for-ati-cedar-pro-hd-5450-6350-slow%3B-how-to-make-it-quicker-4175539824/)

floppy_stuttgart 04-15-2015 03:33 PM

Driver "fglrx" for "ATI Cedar Pro HD 5450/6350" slow; how to make it quicker?
 
I newly installed the fglrx driver instead the radeon opensource; the video is better but the movement of windows is very slow. Is there a possibility to accelerate that system?
the Xorg.conf has no specific setup.
Any advice is welcome.

Code:

System:    Host: hp7100 Kernel: 3.7.10-antix.7-486-smp i686 (32 bit)
          Desktop: Fluxbox 1.3.2
          Distro: antiX-13.1_386-base Luddite 19 June 2013
Machine:  System: Hewlett-Packard product: HP Compaq dc7100 USDT(DX877AV) serial: HUB5090KPM
          Mobo: Hewlett-Packard model: 0980h serial: HUB5090KPM
          Bios: Hewlett-Packard v: 786C1 v02.15 date: 08/07/2008
CPU:      Single core Intel Pentium 4 (-HT-) cache: 2048 KB
          clock speeds: max: 3393 MHz 1: 3393 MHz 2: 3393 MHz
Graphics:  Card: Advanced Micro Devices [AMD] ATI Cedar PRO [Radeon HD 5450/6350]
          Display Server: X.org 1.12.4 driver: fglrx
          tty size: 80x24 Advanced Data: N/A for root
...
Info:      Processes: 94 Uptime: 1 min Memory: 181.9/3040.2MB
          Client: Shell (bash) inxi: 2.2.19

Code:

[    15.986]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    15.986] X Protocol Version 11, Revision 0
[    15.986] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    15.986] Current Operating System: Linux hp7100 3.7.10-antix.7-486-smp #4 SMP Tue Nov 12 13:37:53 EET 2013 i686
[    15.986] Kernel command line: root=/dev/sda2 quiet nomodeset radeon.modeset=0
[    15.986] Build Date: 09 February 2015  10:12:47AM
[    15.986] xorg-server 2:1.12.4-6+deb7u6 (Julien Cristau <jcristau@debian.org>)
[    15.986] Current version of pixman: 0.26.0
[    15.986]        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    15.986] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.987] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 21:58:52 2015
[    16.044] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.044] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.090] (==) No Layout section.  Using the first Screen section.
[    16.090] (==) No screen section available. Using defaults.
[    16.090] (**) |-->Screen "Default Screen Section" (0)
[    16.090] (**) |  |-->Monitor "<default monitor>"
[    16.104] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    16.104] (**) |  |-->Device "My GPU"
[    16.104] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    16.104] (==) Automatically adding devices
[    16.104] (==) Automatically enabling devices
[    16.401] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
...
[    16.418] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    16.418]        Entry deleted from font path.
[    16.418] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/100dpi,
        built-ins
[    16.418] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.418] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.434] (II) Loader magic: 0xb77995a0
[    16.434] (II) Module ABI versions:
[    16.434]        X.Org ANSI C Emulation: 0.4
[    16.434]        X.Org Video Driver: 12.1
[    16.434]        X.Org XInput driver : 16.0
[    16.434]        X.Org Server Extension : 6.0
[    16.435] (--) PCI:*(0:6:0:0) 1002:68f9:1787:2291 rev 0, Mem @ 0xe0000000/268435456, 0xf0600000/131072, I/O @ 0x00001000/256, BIOS @ 0x????????/131072
[    16.435] (II) Open ACPI successful (/var/run/acpid.socket)
[    16.435] (II) LoadModule: "extmod"
[    16.509] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.576] (II) Module extmod: vendor="X.Org Foundation"
[    16.576]        compiled for 1.12.4, module version = 1.0.0
[    16.577]        Module class: X.Org Server Extension
[    16.577]        ABI class: X.Org Server Extension, version 6.0
[    16.577] (II) Loading extension SELinux
[    16.577] (II) Loading extension MIT-SCREEN-SAVER
[    16.577] (II) Loading extension XFree86-VidModeExtension
[    16.577] (II) Loading extension XFree86-DGA
[    16.577] (II) Loading extension DPMS
[    16.577] (II) Loading extension XVideo
[    16.577] (II) Loading extension XVideo-MotionCompensation
[    16.577] (II) Loading extension X-Resource
[    16.577] (II) LoadModule: "dbe"
[    16.577] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.617] (II) Module dbe: vendor="X.Org Foundation"
[    16.617]        compiled for 1.12.4, module version = 1.0.0
[    16.617]        Module class: X.Org Server Extension
[    16.617]        ABI class: X.Org Server Extension, version 6.0
[    16.617] (II) Loading extension DOUBLE-BUFFER
[    16.617] (II) LoadModule: "glx"
[    16.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.732] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    16.732]        compiled for 6.9.0, module version = 1.0.0
[    16.732] (II) Loading extension GLX
[    16.732] (II) LoadModule: "record"
[    16.733] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.757] (II) Module record: vendor="X.Org Foundation"
[    16.757]        compiled for 1.12.4, module version = 1.13.0
[    16.757]        Module class: X.Org Server Extension
[    16.757]        ABI class: X.Org Server Extension, version 6.0
[    16.757] (II) Loading extension RECORD
[    16.757] (II) LoadModule: "dri"
[    16.757] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.767] (II) Module dri: vendor="X.Org Foundation"
[    16.767]        compiled for 1.12.4, module version = 1.0.0
[    16.767]        ABI class: X.Org Server Extension, version 6.0
[    16.767] (II) Loading extension XFree86-DRI
[    16.767] (II) LoadModule: "dri2"
[    16.767] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.776] (II) Module dri2: vendor="X.Org Foundation"
[    16.776]        compiled for 1.12.4, module version = 1.2.0
[    16.776]        ABI class: X.Org Server Extension, version 6.0
[    16.776] (II) Loading extension DRI2
[    16.776] (II) LoadModule: "fglrx"
[    16.782] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    18.151] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    18.152]        compiled for 1.4.99.906, module version = 14.50.2
[    18.152]        Module class: X.Org Video Driver
[    18.190] (II) Loading sub module "fglrxdrm"
[    18.190] (II) LoadModule: "fglrxdrm"
[    18.190] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.310] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.310]        compiled for 1.4.99.906, module version = 14.50.2
[    18.321] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[    18.321] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003                         
[    18.321] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:53
[    18.321] (++) using VT number 7

[    18.342] (WW) Falling back to old probe method for fglrx
[    18.719] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    18.780] ukiDynamicMajor: found major device number 250
[    18.849] (--) Assigning device section with no busID to primary device
[    18.849] (--) Chipset Supported AMD Graphics Processor (0x68F9) found
[    18.849] (WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
[    18.850] (II) fglrx(0): pEnt->device->identifier=0xb8b0c5c8
[    18.850] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    18.850] (II) fglrx(0): FB driver is not enabled
[    18.850] (II) Loading sub module "vgahw"
[    18.850] (II) LoadModule: "vgahw"
[    18.851] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    18.891] (II) Module vgahw: vendor="X.Org Foundation"
[    18.891]        compiled for 1.12.4, module version = 0.1.0
[    18.892]        ABI class: X.Org Video Driver, version 12.1
[    18.892] (II) fglrx(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    18.892] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[    18.892] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    18.892] (==) fglrx(0): Default visual is TrueColor
[    18.892] (==) fglrx(0): RGB weight 888
[    18.892] (II) fglrx(0): Using 8 bits per RGB
[    18.892] (==) fglrx(0): Buffer Tiling is ON
[    18.914] (II) Loading sub module "fglrxdrm"
[    18.914] (II) LoadModule: "fglrxdrm"
[    18.914] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    18.914] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    18.914]        compiled for 1.4.99.906, module version = 14.50.2
[    18.916] ukiDynamicMajor: found major device number 250
[    18.916] ukiDynamicMajor: found major device number 250
[    18.916] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    18.916] ukiOpenDevice: node name is /dev/ati/card0
[    18.916] ukiOpenDevice: open result is 11, (OK)
[    20.601] ukiOpenByBusid: ukiOpenMinor returns 11
[    20.601] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    20.601] (**) fglrx(0): NoAccel = NO
[    20.602] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    20.602] (--) fglrx(0): Chipset: "AMD Radeon HD 5450  " (Chipset = 0x68f9)
[    20.602] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2291)
[    20.602] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    20.602] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[    20.602] (--) fglrx(0): MMIO registers at 0xf0600000
[    20.602] (--) fglrx(0): I/O port at 0x00001000
[    20.602] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    20.619] (II) fglrx(0): AC Adapter is used
[    20.639] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    21.044] (II) Loading sub module "vbe"
[    21.044] (II) LoadModule: "vbe"
[    21.044] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    21.059] (II) Module vbe: vendor="X.Org Foundation"
[    21.059]        compiled for 1.12.4, module version = 1.1.0
[    21.059]        ABI class: X.Org Video Driver, version 12.1
[    21.084] (II) fglrx(0): VESA BIOS detected
[    21.084] (II) fglrx(0): VESA VBE Version 3.0
[    21.084] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    21.084] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    21.084] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    21.084] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    21.084] (II) fglrx(0): VESA VBE OEM Product: CEDAR
[    21.084] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    21.084] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    21.085] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2
[    21.085] (II) fglrx(0): PCIE card detected
[    21.085] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    21.085] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    21.085] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    21.085] (II) fglrx(0): RandR 1.2 support is enabled!
[    21.085] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    21.085] (II) Loading sub module "fb"
[    21.085] (II) LoadModule: "fb"
[    21.085] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.099] (II) Module fb: vendor="X.Org Foundation"
[    21.099]        compiled for 1.12.4, module version = 1.0.0
[    21.099]        ABI class: X.Org ANSI C Emulation, version 0.4
[    21.099] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    21.099] (II) Loading sub module "ddc"
[    21.099] (II) LoadModule: "ddc"
[    21.099] (II) Module "ddc" already built-in
[    21.526] (II) fglrx(0): Output DFP1 has no monitor section
[    21.527] (II) fglrx(0): Output DFP2 has no monitor section
[    21.527] (II) fglrx(0): Output CRT1 has no monitor section
[    21.527] (II) fglrx(0): Output CRT2 has no monitor section
[    21.527] (II) Loading sub module "ddc"
[    21.527] (II) LoadModule: "ddc"
[    21.527] (II) Module "ddc" already built-in
[    21.527] (II) fglrx(0): Connected Display0: CRT2
[    21.527] (II) fglrx(0): Display0 EDID data ---------------------------
[    21.527] (II) fglrx(0): Manufacturer: SNY  Model: 880  Serial#: 16843009
[    21.527] (II) fglrx(0): Year: 2003  Week: 18
[    21.527] (II) fglrx(0): EDID Version: 1.3
[    21.527] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    21.527] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    21.527] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 29
[    21.527] (II) fglrx(0): Gamma: 2.20
[    21.527] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    21.527] (II) fglrx(0): First detailed timing is preferred mode
[    21.527] (II) fglrx(0): redX: 0.633 redY: 0.340  greenX: 0.295 greenY: 0.603
[    21.527] (II) fglrx(0): blueX: 0.141 blueY: 0.096  whiteX: 0.283 whiteY: 0.298
[    21.527] (II) fglrx(0): Supported established timings:
[    21.527] (II) fglrx(0): 720x400@70Hz
[    21.527] (II) fglrx(0): 640x480@60Hz
[    21.527] (II) fglrx(0): 800x600@60Hz
[    21.527] (II) fglrx(0): 1024x768@60Hz
[    21.527] (II) fglrx(0): Manufacturer's mask: 0
[    21.527] (II) fglrx(0): Supported standard timings:
[    21.527] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.527] (II) fglrx(0): Supported detailed timing:
[    21.527] (II) fglrx(0): clock: 108.0 MHz  Image Size:  359 x 287 mm
[    21.527] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.527] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.527] (II) fglrx(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 65 kHz, PixClock max 115 MHz
[    21.527] (II) fglrx(0): Monitor name: SDM-P82
[    21.527] (II) fglrx(0): Serial No: 4507930
[    21.527] (II) fglrx(0): EDID (in hex):
[    21.528] (II) fglrx(0):        00ffffffffffff004dd9800801010101
[    21.528] (II) fglrx(0):        120d01030e241d78ea0929a2574b9a24
[    21.528] (II) fglrx(0):        18484ca1080081800101010101010101
[    21.528] (II) fglrx(0):        010101010101302a009851002a403070
[    21.528] (II) fglrx(0):        1300671f1100001e000000fd00393f1c
[    21.528] (II) fglrx(0):        410b000a202020202020000000fc0053
[    21.528] (II) fglrx(0):        444d2d5038320a2020202020000000ff
[    21.528] (II) fglrx(0):        00343530373933300a202020202000a6
[    21.528] (II) fglrx(0): End of Display0 EDID data --------------------
[    21.528] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    21.529] (II) fglrx(0): EDID for output DFP1
[    21.529] (II) fglrx(0): EDID for output DFP2
[    21.529] (II) fglrx(0): EDID for output CRT1
[    21.529] (II) fglrx(0): EDID for output CRT2
[    21.529] (II) fglrx(0): Manufacturer: SNY  Model: 880  Serial#: 16843009
[    21.529] (II) fglrx(0): Year: 2003  Week: 18
[    21.529] (II) fglrx(0): EDID Version: 1.3
[    21.529] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    21.529] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[    21.529] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 29
[    21.529] (II) fglrx(0): Gamma: 2.20
[    21.529] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    21.529] (II) fglrx(0): First detailed timing is preferred mode
[    21.529] (II) fglrx(0): redX: 0.633 redY: 0.340  greenX: 0.295 greenY: 0.603
[    21.529] (II) fglrx(0): blueX: 0.141 blueY: 0.096  whiteX: 0.283 whiteY: 0.298
[    21.529] (II) fglrx(0): Supported established timings:
[    21.529] (II) fglrx(0): 720x400@70Hz
[    21.529] (II) fglrx(0): 640x480@60Hz
[    21.529] (II) fglrx(0): 800x600@60Hz
[    21.529] (II) fglrx(0): 1024x768@60Hz
[    21.529] (II) fglrx(0): Manufacturer's mask: 0
[    21.529] (II) fglrx(0): Supported standard timings:
[    21.529] (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.529] (II) fglrx(0): Supported detailed timing:
[    21.529] (II) fglrx(0): clock: 108.0 MHz  Image Size:  359 x 287 mm
[    21.529] (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.529] (II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.529] (II) fglrx(0): Ranges: V min: 57 V max: 63 Hz, H min: 28 H max: 65 kHz, PixClock max 115 MHz
[    21.529] (II) fglrx(0): Monitor name: SDM-P82
[    21.530] (II) fglrx(0): Serial No: 4507930
[    21.530] (II) fglrx(0): EDID (in hex):
[    21.530] (II) fglrx(0):        00ffffffffffff004dd9800801010101
[    21.530] (II) fglrx(0):        120d01030e241d78ea0929a2574b9a24
[    21.530] (II) fglrx(0):        18484ca1080081800101010101010101
[    21.530] (II) fglrx(0):        010101010101302a009851002a403070
[    21.530] (II) fglrx(0):        1300671f1100001e000000fd00393f1c
[    21.530] (II) fglrx(0):        410b000a202020202020000000fc0053
[    21.530] (II) fglrx(0):        444d2d5038320a2020202020000000ff
[    21.530] (II) fglrx(0):        00343530373933300a202020202000a6
[    21.530] (II) fglrx(0): Printing probed modes for output CRT2
[    21.530] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1328 1440 1688  960 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1328 1440 1688  768 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1328 1440 1688  720 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.530] (II) fglrx(0): Modeline "1024x768"x60.0  65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    21.530] (II) fglrx(0): Modeline "800x600"x60.0  40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    21.530] (II) fglrx(0): Modeline "640x480"x60.0  25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    21.530] (II) fglrx(0): Output DFP1 disconnected
[    21.530] (II) fglrx(0): Output DFP2 disconnected
[    21.530] (II) fglrx(0): Output CRT1 disconnected
[    21.530] (II) fglrx(0): Output CRT2 connected
[    21.530] (II) fglrx(0): Using exact sizes for initial modes
[    21.530] (II) fglrx(0): Output CRT2 using initial mode 1280x1024
[    21.530] (II) fglrx(0): DPI set to (96, 96)
[    21.530] (II) fglrx(0): Eyefinity capable adapter detected.
[    21.530] (II) fglrx(0): Adapter AMD Radeon HD 5450  has 3 configurable heads and 1 displays connected.
[    21.530] (==) fglrx(0):  PseudoColor visuals disabled
[    21.531] (II) Loading sub module "ramdac"
[    21.531] (II) LoadModule: "ramdac"
[    21.531] (II) Module "ramdac" already built-in
[    21.531] (==) fglrx(0): NoDRI = NO
[    21.531] (==) fglrx(0): Capabilities: 0x00000000
[    21.531] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    21.531] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    21.531] (==) fglrx(0): UseFastTLS=0
[    21.531] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    21.531] (--) Depth 24 pixmap format is 32 bpp
[    21.531] (II) Loading extension ATIFGLRXDRI
[    21.531] (II) fglrx(0): doing swlDriScreenInit
[    21.531] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    21.531] ukiDynamicMajor: found major device number 250
[    21.531] ukiDynamicMajor: found major device number 250
[    21.531] ukiDynamicMajor: found major device number 250
[    21.532] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    21.532] ukiOpenDevice: node name is /dev/ati/card0
[    21.532] ukiOpenDevice: open result is 12, (OK)
[    21.532] ukiOpenByBusid: ukiOpenMinor returns 12
[    21.532] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    21.532] (II) fglrx(0): [uki] DRM interface version 1.0
[    21.532] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
[    21.532] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    21.532] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7580000
[    21.532] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    21.532] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    21.532] (II) fglrx(0): swlDriScreenInit done
[    21.532] (II) fglrx(0): Kernel Module Version Information:
[    21.532] (II) fglrx(0):    Name: fglrx
[    21.532] (II) fglrx(0):    Version: 14.50.2
[    21.532] (II) fglrx(0):    Date: Nov 20 2014
[    21.532] (II) fglrx(0):    Desc: AMD FireGL DRM kernel module
[    21.532] (II) fglrx(0): Kernel Module version matches driver.
[    21.532] (II) fglrx(0): Kernel Module Build Time Information:
[    21.532] (II) fglrx(0):    Build-Kernel UTS_RELEASE:        3.7.10-antix.7-486-smp
[    21.532] (II) fglrx(0):    Build-Kernel MODVERSIONS:        yes
[    21.532] (II) fglrx(0):    Build-Kernel __SMP__:            yes
[    21.532] (II) fglrx(0):    Build-Kernel PAGE_SIZE:          0x1000
[    21.532] (II) fglrx(0): [uki] register handle = 0x00004000
[    21.593] (II) fglrx(0): DRI initialization successfull
[    21.630] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000
[    21.641] (==) fglrx(0): Backing store disabled
[    21.641] (II) Loading extension FGLRXEXTENSION
[    21.641] (==) fglrx(0): DPMS enabled
[    21.642] (II) fglrx(0): Initialized in-driver Xinerama extension
[    21.642] (**) fglrx(0): Textured Video is enabled.
[    21.642] (II) LoadModule: "glesx"
[    21.643] (II) Loading /usr/lib/xorg/modules/glesx.so
[    22.274] (II) Module glesx: vendor="X.Org Foundation"
[    22.274]        compiled for 1.4.99.906, module version = 1.0.0
[    22.282] (II) Loading extension GLESX
[    22.282] (II) fglrx(0): GLESX enableFlags = 8784
[    22.294] (II) fglrx(0): GLESX is enabled
[    22.294] (II) LoadModule: "amdxmm"
[    22.294] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    22.321] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.321]        compiled for 1.4.99.906, module version = 2.0.0
[    22.335] (II) Loading extension AMDXVOPL
[    22.335] (II) Loading extension AMDXVBA
[    22.356] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    22.359] (II) fglrx(0): Enable composite support successfully
[    22.359] (II) fglrx(0): X context handle = 0x1
[    22.359] (II) fglrx(0): [DRI] installation complete
[    22.359] (==) fglrx(0): Silken mouse enabled
[    22.360] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.361] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.606] (--) RandR disabled
[    22.606] (II) Initializing built-in extension Generic Event Extension
[    22.606] (II) Initializing built-in extension SHAPE
[    22.606] (II) Initializing built-in extension MIT-SHM
[    22.606] (II) Initializing built-in extension XInputExtension
[    22.606] (II) Initializing built-in extension XTEST
[    22.606] (II) Initializing built-in extension BIG-REQUESTS
[    22.606] (II) Initializing built-in extension SYNC
[    22.606] (II) Initializing built-in extension XKEYBOARD
[    22.606] (II) Initializing built-in extension XC-MISC
[    22.606] (II) Initializing built-in extension SECURITY
[    22.606] (II) Initializing built-in extension XINERAMA
[    22.606] (II) Initializing built-in extension XFIXES
[    22.606] (II) Initializing built-in extension RENDER
[    22.606] (II) Initializing built-in extension RANDR
[    22.606] (II) Initializing built-in extension COMPOSITE
[    22.606] (II) Initializing built-in extension DAMAGE
[    22.606] (II) SELinux: Disabled on system
[    22.611] ukiDynamicMajor: found major device number 250
[    22.611] ukiDynamicMajor: found major device number 250
[    22.611] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    22.611] ukiOpenDevice: node name is /dev/ati/card0
[    22.611] ukiOpenDevice: open result is 13, (OK)
[    22.611] ukiOpenByBusid: ukiOpenMinor returns 13
[    22.611] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiDynamicMajor: found major device number 250
[    24.648] ukiOpenDevice: node name is /dev/ati/card0
[    24.648] ukiOpenDevice: open result is 14, (OK)
[    24.648] ukiGetBusid returned 'PCI:6:0:0'
[    24.648] ukiOpenDevice: node name is /dev/ati/card1
[    24.648] ukiOpenDevice: open result is -1, (No such device)
[    24.648] ukiOpenDevice: open result is -1, (No such device)
...
[    24.650] ukiOpenDevice: node name is /dev/ati/card15
[    24.650] ukiOpenDevice: open result is -1, (No such device)
[    24.650] ukiOpenDevice: open result is -1, (No such device)
[    24.650] ukiOpenDevice: Open failed
[    24.650] ukiDynamicMajor: found major device number 250
[    24.650] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    24.650] ukiOpenDevice: node name is /dev/ati/card0
[    24.650] ukiOpenDevice: open result is 14, (OK)
[    24.650] ukiOpenByBusid: ukiOpenMinor returns 14
[    24.650] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.704] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiDynamicMajor: found major device number 250
[    24.707] ukiOpenDevice: node name is /dev/ati/card0
[    24.707] ukiOpenDevice: open result is 15, (OK)
[    24.707] ukiGetBusid returned 'PCI:6:0:0'
[    24.707] ukiOpenDevice: node name is /dev/ati/card1
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: Open failed
[    24.707] ukiOpenDevice: node name is /dev/ati/card2
[    24.707] ukiOpenDevice: open result is -1, (No such device)
[    24.707] ukiOpenDevice: open result is -1, (No such device)
...
[    24.709] ukiOpenDevice: node name is /dev/ati/card15
[    24.709] ukiOpenDevice: open result is -1, (No such device)
[    24.709] ukiOpenDevice: open result is -1, (No such device)
[    24.709] ukiOpenDevice: Open failed
[    24.709] ukiDynamicMajor: found major device number 250
[    24.709] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[    24.709] ukiOpenDevice: node name is /dev/ati/card0
[    24.709] ukiOpenDevice: open result is 15, (OK)
[    24.709] ukiOpenByBusid: ukiOpenMinor returns 15
[    24.709] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[    24.996] (II) fglrx(0): OverDrive5 Detected!
[    25.008] (II) fglrx(0): Setting screen physical size to 338 x 270
[    25.430] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    25.431] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.431] (II) LoadModule: "evdev"
[    25.431] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
...
[    25.508] (II) This device may have been added with another device file.
[    25.515] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments


JeremyBoden 04-15-2015 04:09 PM

Define "slow". :)

TobiSGD 04-15-2015 04:32 PM

Which version of the driver have you installed? I would recommend to use the latest beta driver, AMD has done some work on 2D acceleration, it should be on par with the open source driver in regards to that now.

floppy_stuttgart 04-16-2015 11:07 AM

Quote:

Originally Posted by TobiSGD (Post 5348022)
Which version of the driver have you installed? I would recommend to use the latest beta driver, AMD has done some work on 2D acceleration, it should be on par with the open source driver in regards to that now.

The Xorg.0.log posted before indicate a version 14.50.2
Thanks for the advice. I will have a look how to install a new ATI driver in Debian.

floppy_stuttgart 04-16-2015 11:13 AM

Quote:

Originally Posted by JeremyBoden (Post 5348014)
Define "slow". :)

Low? = Negativ; Example:
- the CPU load is < 10%
- I click any windows on the border with the left mouse button and draw virtual circles on the screen with the mouse pointer, then don't touch the mouse
- the CPU go for >90% for several seconds and I can see the windows moving slowly on the screen according the mouse movements I gave several seconds before
Positiv: the video (youtube) and streaming are not flickering as before.

veerain 04-16-2015 11:47 AM

Quote:

HD 5450/6350
This is quite old card and Catalyst already have good drivers support for it. The problem may be of some software incompatibility.

TobiSGD 04-16-2015 12:04 PM

Quote:

Originally Posted by veerain (Post 5348439)
This is quite old card and Catalyst already have good drivers support for it. The problem may be of some software incompatibility.

I rather think the problem is that the OP uses antiX 13.2, which is based on Debian Wheezy, and therefore only gets the drivers from those repositories, which, in terms of driver development, are ancient. Both, the free radeon driver and the proprietary Catalyst/fglrx driver, have made quite some improvements since then. Upgrading to antiX 15-beta1 may be enough to solve that problem.

veerain 04-16-2015 12:11 PM

@TobiSGD: I agree you.

floppy_stuttgart 04-16-2015 01:29 PM

Quote:

Originally Posted by veerain (Post 5348439)
The problem may be of some software incompatibility.

Which one?
All driver versions can be seen in previous posts (log files inxi and Xorg.0.log).

veerain 04-16-2015 01:44 PM

Quote:

Which one?
All driver versions can be seen in previous posts (log files inxi and Xorg.0.log).
If only it is so easy to find. Do as TobiSGD advised and see.

floppy_stuttgart 04-29-2015 12:12 PM

This was an issue of my fluxbox setting.
I made "Fluxbox Settings" "Configuration" "Opaque Window Moving" and now, the CPU is not used too much.


All times are GMT -5. The time now is 05:27 PM.