LinuxQuestions.org
Latest LQ Deal: Linux Power User Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 09-02-2010, 12:12 AM   #1
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
dell optiplex gx-1 kernel compile


I just recently compiled a new kernel and there were a few errors that I'm researching, but at the present time I just want to know if I'm even close to having a fully functional kernel or do I need to go back to the drawing board.

Anyway I'm running Debian 504 on a Dell Optiplex Gx-1 500Mhz p3 processor.
Here is my dmesg output:

dmesg:
Code:
edward@eddy1:~$ dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26 (2.6.26) (root@eddy1) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Fri Aug 27 21:54:17 PDT 2010
[    0.000000] PAT disabled. Not yet verified on this CPU type.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000027ffe000 (usable)
[    0.000000]  BIOS-e820: 0000000027ffe000 - 0000000028000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] 639MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 163838) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   163838
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   163838
[    0.000000] On node 0 totalpages: 163838
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1248 pages used for memmap
[    0.000000]   Normal zone: 158494 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP 000FDF50, 0014 (r0 DELL  )
[    0.000000] ACPI: RSDT 000FDF64, 0028 (r1 DELL    GX1            2 ASL        61)

[    0.000000] ACPI: FACP 000FDF8C, 0074 (r1 DELL    GX1            2 ASL        61)
[    0.000000] ACPI: DSDT FFFF6000, 183F (r1   DELL    dt_ex     1000 MSFT  100000B)
[    0.000000] ACPI: FACS 27FFE000, 0040
[    0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 28000000:d7e00000)
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 162558
[    0.000000] Kernel command line: root=/dev/hda1 ro 
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffb000 (01504000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 435.442 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 643492k/655352k available (1953k kernel code, 11312k reserved, 799k data, 248k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
[    0.004000]     vmalloc : 0xe8800000 - 0xfffb3000   ( 375 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xe7ffe000   ( 639 MB)
[    0.004000]       .init : 0xc03b4000 - 0xc03f2000   ( 248 kB)
[    0.004000]       .data : 0xc02e8504 - 0xc03b0280   ( 799 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02e8504   (1953 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.084499] Calibrating delay using timer specific routine.. 872.09 BogoMIPS (lpj=1744183)
[    0.084841] Security Framework initialized
[    0.084960] SELinux:  Disabled at boot.
[    0.085070] Capability LSM initialized
[    0.085225] Mount-cache hash table entries: 512
[    0.085854] Initializing cgroup subsys ns
[    0.085970] Initializing cgroup subsys cpuacct
[    0.086074] Initializing cgroup subsys devices
[    0.086247] CPU: L1 I cache: 16K, L1 D cache: 16K
[    0.086394] CPU: L2 cache: 512K
[    0.086496] CPU serial number disabled.
[    0.086604] Intel machine check architecture supported.
[    0.086716] Intel machine check reporting enabled on CPU#0.
[    0.086854] CPU: Intel Pentium III (Katmai) stepping 03
[    0.087088] Checking 'hlt' instruction... OK.
[    0.107213] Freeing SMP alternatives: 0k freed
[    0.107324] ACPI: Core revision 20080321
[    0.135004] ACPI: setting ELCR to 0200 (from 0c00)
[    0.136236] net_namespace: 340 bytes
[    0.136379] Booting paravirtualized kernel on bare hardware
[    0.137647] NET: Registered protocol family 16
[    0.139392] ACPI: bus type pci registered
[    0.174828] PCI: PCI BIOS revision 2.10 entry at 0xfcaee, last bus=2
[    0.175021] Setting up standard PCI resources
[    0.185509] ACPI: EC: Look up EC in DSDT
[    0.200315] ACPI: Interpreter enabled
[    0.200428] ACPI: (supports S0 S1 S4 S5)
[    0.200734] ACPI: Using PIC for interrupt routing
[    0.215925] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.216906] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[    0.216915] * this clock source is slow. Consider trying other clock sources
[    0.217272] pci 0000:00:07.3: quirk: region 0800-083f claimed by PIIX4 ACPI
[    0.217388] pci 0000:00:07.3: quirk: region 0850-085f claimed by PIIX4 SMB
[    0.218349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.220427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.228599] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.229797] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.231113] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.232366] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.233520] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.233803] pnp: PnP ACPI init
[    0.233935] ACPI: bus type pnp registered
[    0.258868] pnp: PnP ACPI: found 13 devices
[    0.258980] ACPI: ACPI bus type pnp unregistered
[    0.259092] PnPBIOS: Disabled by ACPI PNP
[    0.260337] usbcore: registered new interface driver usbfs
[    0.260797] usbcore: registered new interface driver hub
[    0.261156] usbcore: registered new device driver usb
[    0.262715] PCI: Using ACPI for IRQ routing
[    0.263428] ACPI: RTC can wake from S4
[    0.263643] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.263758] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[    0.263868] system 00:00: iomem range 0x1000000-0x27ffffff could not be reserved
[    0.264050] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.264166] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved
[    0.264372] system 00:0c: ioport range 0x800-0x85f could not be reserved
[    0.297008] PM-Timer running at invalid rate: 87% of normal - aborting.
[    0.297193] PCI: Bridge: 0000:00:01.0
[    0.297300]   IO window: e000-efff
[    0.297409]   MEM window: 0xfc000000-0xfeffffff
[    0.297517]   PREFETCH window: 0x00000000f9000000-0x00000000f9ffffff
[    0.297633] PCI: Bridge: 0000:00:0f.0
[    0.297730]   IO window: disabled.
[    0.297834]   MEM window: disabled.
[    0.297936]   PREFETCH window: disabled.
[    0.298181] NET: Registered protocol family 2
[    0.298671] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.300300] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.306264] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.307973] TCP: Hash tables configured (established 131072 bind 65536)
[    0.308142] TCP reno registered
[    0.308698] NET: Registered protocol family 1
[    0.309315] checking if image is initramfs... it is
[    1.116916] Freeing initrd memory: 1896k freed
[    1.119585] audit: initializing netlink socket (disabled)
[    1.119745] type=2000 audit(1283397894.116:1): initialized
[    1.120337] Total HugeTLB memory allocated, 0
[    1.120741] VFS: Disk quotas dquot_6.5.1
[    1.120980] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.121263] msgmni has been set to 1260
[    1.121650] io scheduler noop registered (default)
[    1.121761] io scheduler anticipatory registered
[    1.121863] io scheduler deadline registered
[    1.122006] io scheduler cfq registered
[    1.122135] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.122325] pci 0000:01:00.0: Boot video device
[    1.124292] isapnp: Scanning for PnP cards...
[    1.242360]  01:01: card 'CS4236B'
[    1.242468] isapnp: 1 Plug & Play card detected total
[    1.258474] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.258990] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.259448] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.261263] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.261977] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.270499] brd: module loaded
[    1.271883] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.272991] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.275739] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.275862] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.278826] ns558 01:01.01: activated
[    1.296792] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x3a0, speed 710kHz
[    1.322958] mice: PS/2 mouse device common for all mice
[    1.323683] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    1.358070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.358743] usbcore: registered new interface driver yealink
[    1.358861] yealink: Yealink phone driver:yld-20051230
[    1.359428] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.359569] rtc0: alarms up to one day
[    1.359851] cpuidle: using governor ladder
[    1.359957] cpuidle: using governor menu
[    1.360310] Registered led device: rdc:dmz
[    1.375548] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    1.375724] No iBFT detected.
[    1.376205] usbcore: registered new interface driver hiddev
[    1.376497] usbcore: registered new interface driver usbhid
[    1.376614] usbhid: v2.6:USB HID core driver
[    1.378746] TCP cubic registered
[    1.378850] Initializing XFRM netlink socket
[    1.378966] NET: Registered protocol family 17
[    1.379100] NET: Registered protocol family 15
[    1.379210] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[    1.379872] DECnet: Routing cache hash table of 1024 buckets, 4Kbytes
[    1.380014] NET: Registered protocol family 12
[    1.380379] Using IPI Shortcut mode
[    1.381147] registered taskstats version 1
[    1.381643] rtc_cmos 00:05: setting system clock to 2010-09-02 03:24:54 UTC (1283397894)
[    1.382902] Freeing unused kernel memory: 248k freed
[    1.561007] Uniform Multi-Platform E-IDE driver
[    1.561183] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.566777] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at  PCI slot 0000:00:07.1
[    1.566983] PIIX4: not 100% native mode: will probe irqs later
[    1.567109]     ide0: BM-DMA at 0xffa0-0xffa7
[    1.567231]     ide1: BM-DMA at 0xffa8-0xffaf
[    1.567342] Probing IDE interface ide0...
[    1.856207] hda: WDC WD136AA, ATA DISK drive
[    2.528335] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    2.529052] hda: UDMA/33 mode selected
[    2.529928] Probing IDE interface ide1...
[    3.264238] hdc: CRD-8400B, ATAPI CD/DVD-ROM drive
[    3.712247] hdd: ATAPI CD-RW 32/12/40X, ATAPI CD/DVD-ROM drive
[    3.768343] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.768472] hdc: Disabling (U)DMA for CRD-8400B (blacklisted)
[    3.768599] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.768738] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    3.768986] hdd: UDMA/33 mode selected
[    3.769320] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.769552] ide1 at 0x170-0x177,0x376 on irq 15
[    3.779150] No dock devices found.
[    3.847273] SCSI subsystem initialized
[    3.925708] libata version 3.00 loaded.
[    3.974030] hda: max request size: 128KiB
[    3.995114] hda: 26564832 sectors (13601 MB) w/2048KiB Cache, CHS=26354/16/63
[    3.995308] hda: cache flushes not supported
[    3.995542]  hda: hda1 hda2 < hda5 >
[    4.190394] ACPI: ACPI0007:00 is registered as cooling_device0
[    5.228250] hdc: ATAPI 48X CD-ROM drive, 128kB Cache
[    5.228530] Uniform CD-ROM driver Revision: 3.20
[    5.241331] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
[    6.481443] PM: Starting manual resume from disk
[    6.631296] kjournald starting.  Commit interval 5 seconds
[    6.631450] EXT3-fs: mounted filesystem with ordered data mode.
[   10.195849] udevd version 125 started
[   11.980015] Linux agpgart interface v0.103
[   12.122607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.177722] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.203043] agpgart: Detected an Intel 440BX Chipset.
[   12.211292] agpgart: AGP aperture is 64M @ 0xf4000000
[   12.597256] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   12.612316] ACPI: Power Button (FF) [PWRF]
[   14.091964] USB Universal Host Controller Interface driver v3.0
[   14.093293] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   14.093407] PCI: setting IRQ 11 as level-triggered
[   14.093419] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   14.093681] uhci_hcd 0000:00:07.2: UHCI Host Controller
[   14.094196] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[   14.094408] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
[   14.094906] usb usb1: configuration #1 chosen from 1 choice
[   14.095153] hub 1-0:1.0: USB hub found
[   14.095290] hub 1-0:1.0: 2 ports detected
[   14.196906] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[   14.197036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.197195] usb usb1: Product: UHCI Host Controller
[   14.197300] usb usb1: Manufacturer: Linux 2.6.26 uhci_hcd
[   14.197406] usb usb1: SerialNumber: 0000:00:07.2
[   14.223197] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[   14.223322] PCI: setting IRQ 10 as level-triggered
[   14.223334] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   14.223595] 3c59x: Donald Becker and others.
[   14.223723] 0000:00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at e88d0400.
[   14.246440] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   14.246711] 0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at e88f2000.
[   14.303486] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[   14.303639] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
[   14.842565] Floppy drive(s): fd0 is 720k
[   14.878602] FDC 0 is a National Semiconductor PC87306
[   15.500471] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
[   15.535138] parport_pc 00:0b: reported by Plug and Play ACPI
[   15.535401] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   16.863444] cs4236_isapnp 01:01.00: activated
[   16.866243] cs4236_isapnp 01:01.02: activated
[   16.869050] cs4236_isapnp 01:01.03: activated
[   17.816358] udev: renamed network interface eth1 to eth0
[   17.861982] udev: renamed network interface eth0_rename to eth1
[   21.536647] Adding 602396k swap on /dev/hda5.  Priority:-1 extents:1 across:602396k
[  291.731688] EXT3 FS on hda1, internal journal
[  292.371719] loop: module loaded
[  295.630520] eth0:  setting half-duplex.
[  299.297022] NET: Registered protocol family 10
[  299.299562] lo: Disabled Privacy Extensions
[  299.303825] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  299.588893] lp0: using parport0 (interrupt-driven).
[  306.436072] eth1:  setting full-duplex.
[  321.395025] eth1: no IPv6 routers present
lspci:
Code:
edward@eddy1:~$ lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64)
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
Quote:
I also noticed that when other people post questions an comments their post has window with scrollbar instead of just php What is it called so I can post and not take awhole window?

Was there something missing in my makeconf file?
Do I have a lot of work ahead of me?
I wanted to include config file I need to know where to copy from.

[ 0.297008] PM-Timer running at invalid rate: 87% of normal - aborting.

Last edited by Tinkster; 09-02-2010 at 12:26 AM.
 
Old 09-02-2010, 12:25 AM   #2
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 23,066
Blog Entries: 11

Rep: Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910
I took the liberty to answer one of your questions by
changing your [ PHP ] tags to [ CODE ] and [ quote ] tags
respectively ... much better that way ;}


Cheers,
Tink

Last edited by Tinkster; 09-02-2010 at 12:26 AM.
 
Old 09-02-2010, 12:49 AM   #3
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Original Poster
Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
Also here is dmesg when I had MJ connected I tried usin wine but had hadn't read enough on the subject.

dmesg:

Code:
edward@eddy1:~$ dmesg 
[    0.000000] Initializing cgroup subsys cpuset 
[    0.000000] Initializing cgroup subsys cpu 
[    0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-24lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Aug 19 03:44:10 UTC 2010 
[    0.000000] BIOS-provided physical RAM map: 
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) 
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) 
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000027ffe000 (usable) 
[    0.000000]  BIOS-e820: 0000000027ffe000 - 0000000028000000 (reserved) 
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 
[    0.000000] 0MB HIGHMEM available. 
[    0.000000] 639MB LOWMEM available. 
[    0.000000] Entering add_active_range(0, 0, 163838) 0 entries of 256 used 
[    0.000000] Zone PFN ranges: 
[    0.000000]   DMA             0 ->     4096 
[    0.000000]   Normal       4096 ->   163838 
[    0.000000]   HighMem    163838 ->   163838 
[    0.000000] Movable zone start PFN for each node 
[    0.000000] early_node_map[1] active PFN ranges 
[    0.000000]     0:        0 ->   163838 
[    0.000000] On node 0 totalpages: 163838 
[    0.000000]   DMA zone: 32 pages used for memmap 
[    0.000000]   DMA zone: 0 pages reserved 
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0 
[    0.000000]   Normal zone: 1248 pages used for memmap 
[    0.000000]   Normal zone: 158494 pages, LIFO batch:31 
[    0.000000]   HighMem zone: 0 pages used for memmap 
[    0.000000]   Movable zone: 0 pages used for memmap 
[    0.000000] DMI 2.2 present. 
[    0.000000] ACPI: RSDP 000FDF50, 0014 (r0 DELL  ) 
[    0.000000] ACPI: RSDT 000FDF64, 0028 (r1 DELL    GX1            2 ASL        61) 
[    0.000000] ACPI: FACP 000FDF8C, 0074 (r1 DELL    GX1            2 ASL        61) 
[    0.000000] ACPI: DSDT FFFF6000, 183F (r1   DELL    dt_ex     1000 MSFT  100000B) 
[    0.000000] ACPI: FACS 27FFE000, 0040 
[    0.000000] ACPI: PM-Timer IO Port: 0x808 
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 28000000:d7e00000) 
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 
[    0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs 
[    0.000000] PERCPU: Allocating 37992 bytes of per cpu data 
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 162558 
[    0.000000] Kernel command line: root=/dev/hda1 ro 
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" 
[    0.000000] mapped APIC to ffffb000 (0150f000) 
[    0.000000] Enabling fast FPU save and restore... done. 
[    0.000000] Enabling unmasked SIMD FPU exception support... done. 
[    0.000000] Initializing CPU#0 
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) 
[    0.000000] Detected 498.769 MHz processor. 
[    0.004000] Console: colour VGA+ 80x25 
[    0.004000] console [tty0] enabled 
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 
[    0.004000] Memory: 643652k/655352k available (1771k kernel code, 11144k reserved, 749k data, 244k init, 0k highmem) 
[    0.004000] virtual kernel memory layout: 
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB) 
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB) 
[    0.004000]     vmalloc : 0xe8800000 - 0xff7fe000   ( 367 MB) 
[    0.004000]     lowmem  : 0xc0000000 - 0xe7ffe000   ( 639 MB) 
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB) 
[    0.004000]       .data : 0xc02bae5d - 0xc0376620   ( 749 kB) 
[    0.004000]       .text : 0xc0100000 - 0xc02bae5d   (1771 kB) 
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. 
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated 
[    0.084566] Calibrating delay using timer specific routine.. 999.35 BogoMIPS (lpj=1998708) 
[    0.084835] Security Framework initialized 
[    0.084912] SELinux:  Disabled at boot. 
[    0.084978] Capability LSM initialized 
[    0.085098] Mount-cache hash table entries: 512 
[    0.085730] Initializing cgroup subsys ns 
[    0.085801] Initializing cgroup subsys cpuacct 
[    0.085866] Initializing cgroup subsys devices 
[    0.086001] CPU: L1 I cache: 16K, L1 D cache: 16K 
[    0.086103] CPU: L2 cache: 512K 
[    0.086162] CPU serial number disabled. 
[    0.086225] Intel machine check architecture supported. 
[    0.086295] Intel machine check reporting enabled on CPU#0. 
[    0.086402] Checking 'hlt' instruction... OK. 
[    0.101188] SMP alternatives: switching to UP code 
[    0.117930] Freeing SMP alternatives: 16k freed 
[    0.118000] ACPI: Core revision 20080321 
[    0.142281] ACPI: setting ELCR to 0200 (from 0c00) 
[    0.142943] weird, boot CPU (#0) not listedby the BIOS. 
[    0.143010] SMP motherboard not detected. 
[    0.143070] Local APIC not detected. Using dummy APIC emulation. 
[    0.143134] SMP disabled 
[    0.143451] Brought up 1 CPUs 
[    0.143513] Total of 1 processors activated (999.35 BogoMIPS). 
[    0.143595] CPU0 attaching sched-domain: 
[    0.143607]  domain 0: span 0 
[    0.143616]   groups: 0 
[    0.144224] net_namespace: 660 bytes 
[    0.144324] Booting paravirtualized kernel on bare hardware 
[    0.145498] NET: Registered protocol family 16 
[    0.146918] ACPI: bus type pci registered 
[    0.177944] PCI: PCI BIOS revision 2.10 entry at 0xfcaee, last bus=2 
[    0.178016] PCI: Using configuration type 1 for base access 
[    0.178149] Setting up standard PCI resources 
[    0.185661] ACPI: EC: Look up EC in DSDT 
[    0.198614] ACPI: Interpreter enabled 
[    0.198686] ACPI: (supports S0 S1 S4 S5) 
[    0.198932] ACPI: Using PIC for interrupt routing 
[    0.213592] ACPI: PCI Root Bridge [PCI0] (0000:00) 
[    0.214246] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, 
[    0.214255] * this clock source is slow. Consider trying other clock sources 
[    0.214451] pci 0000:00:07.3: quirk: region 0800-083f claimed by PIIX4 ACPI 
[    0.214524] pci 0000:00:07.3: quirk: region 0850-085f claimed by PIIX4 SMB 
[    0.215087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
[    0.216943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] 
[    0.224802] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) 
[    0.225823] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. 
[    0.226923] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15) 
[    0.227945] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) 
[    0.229062] Linux Plug and Play Support v0.97 (c) Adam Belay 
[    0.229316] pnp: PnP ACPI init 
[    0.229401] ACPI: bus type pnp registered 
[    0.251846] pnp: PnP ACPI: found 13 devices 
[    0.251916] ACPI: ACPI bus type pnp unregistered 
[    0.251984] PnPBIOS: Disabled by ACPI PNP 
[    0.253742] PCI: Using ACPI for IRQ routing 
[    0.254424] ACPI: RTC can wake from S4 
[    0.254616] system 00:00: iomem range 0x0-0x9ffff could not be reserved 
[    0.254693] system 00:00: iomem range 0x100000-0xffffff could not be reserved 
[    0.254764] system 00:00: iomem range 0x1000000-0x27ffffff could not be reserved 
[    0.254847] system 00:00: iomem range 0xf0000-0xfffff could not be reserved 
[    0.254919] system 00:00: iomem range 0xffe00000-0xffffffff could not be reserved 
[    0.255039] system 00:0c: ioport range 0x800-0x85f could not be reserved 
[    0.287576] PCI: Bridge: 0000:00:01.0 
[    0.287642]   IO window: e000-efff 
[    0.287703]   MEM window: 0xfc000000-0xfeffffff 
[    0.287766]   PREFETCH window: 0x00000000f9000000-0x00000000f9ffffff 
[    0.287836] PCI: Bridge: 0000:00:0f.0 
[    0.287893]   IO window: disabled. 
[    0.287952]   MEM window: disabled. 
[    0.288030]   PREFETCH window: disabled. 
[    0.288224] NET: Registered protocol family 2 
[    0.288741] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) 
[    0.290249] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) 
[    0.295393] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) 
[    0.298270] TCP: Hash tables configured (established 131072 bind 65536) 
[    0.298356] TCP reno registered 
[    0.298944] NET: Registered protocol family 1 
[    0.299532] checking if image is initramfs... it is 
[    0.788081] Switched to high resolution mode on CPU 0 
[    1.040537] Freeing initrd memory: 1911k freed 
[    1.043393] audit: initializing netlink socket (disabled) 
[    1.043508] type=2000 audit(1283381778.040:1): initialized 
[    1.044161] Total HugeTLB memory allocated, 0 
[    1.044563] VFS: Disk quotas dquot_6.5.1 
[    1.044754] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) 
[    1.044990] msgmni has been set to 1261 
[    1.045598] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) 
[    1.045684] io scheduler noop registered 
[    1.045743] io scheduler anticipatory registered 
[    1.045803] io scheduler deadline registered 
[    1.045908] io scheduler cfq registered (default) 
[    1.045996] pci 0000:00:00.0: Limiting direct PCI/PCI transfers 
[    1.046127] pci 0000:01:00.0: Boot video device 
[    1.048011] isapnp: Scanning for PnP cards... 
[    1.151520]  01:01: card 'CS4236B' 
[    1.151583] isapnp: 1 Plug & Play card detected total 
[    1.168531] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 
[    1.168980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
[    1.169390] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 
[    1.171174] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
[    1.171870] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 
[    1.181277] brd: module loaded 
[    1.181899] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 
[    1.184475] serio: i8042 KBD port at 0x60,0x64 irq 1 
[    1.184558] serio: i8042 AUX port at 0x60,0x64 irq 12 
[    1.185490] mice: PS/2 mouse device common for all mice 
[    1.186252] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 
[    1.186351] rtc0: alarms up to one day 
[    1.186622] cpuidle: using governor ladder 
[    1.186689] cpuidle: using governor menu 
[    1.186763] No iBFT detected. 
[    1.189010] TCP cubic registered 
[    1.189076] NET: Registered protocol family 17 
[    1.189155] Using IPI No-Shortcut mode 
[    1.189914] registered taskstats version 1 
[    1.190360] rtc_cmos 00:05: setting system clock to 2010-09-01 22:56:18 UTC (1283381778) 
[    1.191414] Freeing unused kernel memory: 244k freed 
[    1.217087] input: AT Translated Set 2 keyboard as /class/input/input0 
[    1.359343] Uniform Multi-Platform E-IDE driver 
[    1.359436] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 
[    1.365233] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at  PCI slot 0000:00:07.1 
[    1.365349] PIIX4: not 100% native mode: will probe irqs later 
[    1.365431]     ide0: BM-DMA at 0xffa0-0xffa7 
[    1.366464]     ide1: BM-DMA at 0xffa8-0xffaf 
[    1.366532] Probing IDE interface ide0... 
[    1.652191] hda: WDC WD136AA, ATA DISK drive 
[    2.324321] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 
[    2.324937] hda: UDMA/33 mode selected 
[    2.325665] Probing IDE interface ide1... 
[    3.060201] hdc: CRD-8400B, ATAPI CD/DVD-ROM drive 
[    3.508185] hdd: ATAPI CD-RW 32/12/40X, ATAPI CD/DVD-ROM drive 
[    3.564327] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 
[    3.564436] hdc: Disabling (U)DMA for CRD-8400B (blacklisted) 
[    3.564518] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 
[    3.564641] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4 
[    3.564788] hdd: UDMA/33 mode selected 
[    3.565112] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 
[    3.565305] ide1 at 0x170-0x177,0x376 on irq 15 
[    3.574588] No dock devices found. 
[    3.637088] SCSI subsystem initialized 
[    3.708892] libata version 3.00 loaded. 
[    3.744933] hda: max request size: 128KiB 
[    3.761534] hda: 26564832 sectors (13601 MB) w/2048KiB Cache, CHS=26354/16/63 
[    3.761534] hda: cache flushes not supported 
[    3.761534]  hda: hda1 hda2 < hda5 > 
[    3.938197] ACPI: ACPI0007:00 is registered as cooling_device0 
[    5.471474] hdc: ATAPI 48X CD-ROM drive, 128kB Cache 
[    5.471686] Uniform CD-ROM driver Revision: 3.20 
[    5.486612] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache 
[    5.950755] PM: Starting manual resume from disk 
[    6.102910] kjournald starting.  Commit interval 5 seconds 
[    6.102910] EXT3-fs: mounted filesystem with ordered data mode. 
[    9.348612] udevd version 125 started 
[   11.632629] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) 
[   15.740077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 
[   15.857946] Linux agpgart interface v0.103 
[   15.877924] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 
[   15.878005] PCI: setting IRQ 10 as level-triggered 
[   15.878017] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 
[   15.878179] 3c59x: Donald Becker and others. 
[   15.878251] 0000:00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at e88b6400. 
[   15.901362] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 
[   15.901434] PCI: setting IRQ 11 as level-triggered 
[   15.901445] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 
[   15.901614] 0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at e88cc000. 
[   16.568246] usbcore: registered new interface driver usbfs 
[   16.568444] usbcore: registered new interface driver hub 
[   16.568740] usbcore: registered new device driver usb 
[   16.579574] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 
[   16.633707] agpgart: Detected an Intel 440BX Chipset. 
[   16.640662] agpgart: AGP aperture is 64M @ 0xf4000000 
[   16.695118] input: PC Speaker as /class/input/input1 
[   16.709189] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device 
[   16.709287] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled! 
[   16.825588] USB Universal Host Controller Interface driver v3.0 
[   16.825835] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 
[   16.826013] uhci_hcd 0000:00:07.2: UHCI Host Controller 
[   16.826466] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 
[   16.826597] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0 
[   16.827035] usb usb1: configuration #1 chosen from 1 choice 
[   16.827240] hub 1-0:1.0: USB hub found 
[   16.827337] hub 1-0:1.0: 2 ports detected 
[   16.932112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 
[   16.932195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   16.932274] usb usb1: Product: UHCI Host Controller 
[   16.932336] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd 
[   16.932400] usb usb1: SerialNumber: 0000:00:07.2 
[   17.974276] input: PS/2 Generic Mouse as /class/input/input2 
[   18.534670] input: Power Button (FF) as /class/input/input3 
[   18.566533] ACPI: Power Button (FF) [PWRF] 
[   20.151647] udev: renamed network interface eth1 to eth0 
[   20.187647] udev: renamed network interface eth0_rename to eth1 
[   20.244151] Floppy drive(s): fd0 is 720k 
[   20.265616] FDC 0 is a National Semiconductor PC87306 
[   22.595868] ns558 01:01.01: activated 
[   22.644486] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x3a0, speed 718kHz 
[   22.675918] parport_pc 00:0b: reported by Plug and Play ACPI 
[   22.676157] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] 
[   25.818347] cs4236_isapnp 01:01.00: activated 
[   25.821002] cs4236_isapnp 01:01.02: activated 
[   25.823660] cs4236_isapnp 01:01.03: activated 
[   28.140245] Adding 602396k swap on /dev/hda5.  Priority:-1 extents:1 across:602396k 
[   28.697796] EXT3 FS on hda1, internal journal 
[   29.391605] loop: module loaded 
[   32.385188] eth0:  setting half-duplex. 
[   38.111220] NET: Registered protocol family 10 
[   38.113431] lo: Disabled Privacy Extensions 
[   38.117173] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[   38.514502] lp0: using parport0 (interrupt-driven). 
[   38.627231] ppdev: user-space parallel port driver 
[   44.950729] eth1:  setting full-duplex. 
[   60.256050] eth1: no IPv6 routers present 
[11223.624075] usb 1-2: new full speed USB device using uhci_hcd and address 2 
[11224.272024] usb 1-2: configuration #1 chosen from 1 choice 
[11224.288134] usb 1-2: New USB device found, idVendor=06e6, idProduct=c200 
[11224.288155] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=96 
[11224.288168] usb 1-2: Product: USB Internet Phone by TigerJet 
[11224.288179] usb 1-2: Manufacturer: TigerJet Network, Inc. 
[11224.288189] usb 1-2: SerialNumber: A9210504049C10 
[11225.738132] Initializing USB Mass Storage driver... 
[11225.754813] scsi0 : SCSI emulation for USB Mass Storage devices 
[11225.756014] usbcore: registered new interface driver usb-storage 
[11225.756081] USB Mass Storage support registered. 
[11225.767755] usb-storage: device found at 2 
[11225.767770] usb-storage: waiting for device to settle before scanning 
[11225.937221] usbcore: registered new interface driver snd-usb-audio 
[11225.958689] usbcore: registered new interface driver hiddev 
[11225.970868] hiddev96hidraw0: USB HID v1.00 Device [TigerJet Network, Inc. USB Internet Phone by TigerJet] on usb-0000:00:07.2-2 
[11225.970958] usbcore: registered new interface driver usbhid 
[11225.970976] usbhid: v2.6:USB HID core driver 
[11230.765786] usb-storage: device scan complete 
[11230.768848] scsi 0:0:0:0: Direct-Access     TigerJet HardDisk         v2.0 PQ: 0 ANSI: 2 
[11230.771685] scsi 0:0:0:1: CD-ROM            TigerJet CD-ROM           v2.0 PQ: 0 ANSI: 2 
[11231.328503] Driver 'sd' needs updating - please use bus_type methods 
[11231.336573] sd 0:0:0:0: [sda] 36352 512-byte hardware sectors (19 MB) 
[11231.339569] sd 0:0:0:0: [sda] Write Protect is off 
[11231.339589] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 
[11231.339600] sd 0:0:0:0: [sda] Assuming drive cache: write through 
[11231.347594] sd 0:0:0:0: [sda] 36352 512-byte hardware sectors (19 MB) 
[11231.350583] sd 0:0:0:0: [sda] Write Protect is off 
[11231.350604] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 
[11231.350616] sd 0:0:0:0: [sda] Assuming drive cache: write through 
[11231.350641]  sda:<4>Driver 'sr' needs updating - please use bus_type methods 
[11231.547468]  unknown partition table 
[11231.547468] sd 0:0:0:0: [sda] Attached SCSI removable disk 
[11231.626514] sr0: scsi3-mmc drive: 0x/0x caddy 
[11231.626869] sr 0:0:0:1: Attached scsi CD-ROM sr0 
[11232.292732] sd 0:0:0:0: Attached scsi generic sg0 type 0 
[11232.292847] sr 0:0:0:1: Attached scsi generic sg1 type 5 
[11233.372082] usb 1-2: reset full speed USB device using uhci_hcd and address 2 
[11233.580090] sr 0:0:0:1: [sr0] Device not ready: Sense Key : Not Ready [current] 
[11233.580090] sr 0:0:0:1: [sr0] Device not ready: Add. Sense: Medium not present 
[11233.580090] end_request: I/O error, dev sr0, sector 0 
[11233.580090] Buffer I/O error on device sr0, logical block 0 
[11233.591073] sr 0:0:0:1: [sr0] Device not ready: Sense Key : Not Ready [current] 
[11233.591096] sr 0:0:0:1: [sr0] Device not ready: Add. Sense: Medium not present 
[11233.591118] end_request: I/O error, dev sr0, sector 4 
[11233.591132] Buffer I/O error on device sr0, logical block 1 
[11233.596040] sr 0:0:0:1: [sr0] Device not ready: Sense Key : Not Ready [current] 
[11233.596040] sr 0:0:0:1: [sr0] Device not ready: Add. Sense: Medium not present 
[11233.596040] end_request: I/O error, dev sr0, sector 0 
[11233.596040] Buffer I/O error on device sr0, logical block 0 
[11233.596040] Buffer I/O error on device sr0, logical block 1 
[11468.096067] floppy0: disk absent or changed during operation 
[11468.096091] end_request: I/O error, dev fd0, sector 0 
[11468.096107] Buffer I/O error on device fd0, logical block 0 
[11468.096259] floppy0: disk absent or changed during operation 
[11468.096275] end_request: I/O error, dev fd0, sector 0 
[11468.096288] Buffer I/O error on device fd0, logical block 0 
[11468.131431] hdc: tray open 
[11468.131742] end_request: I/O error, dev hdc, sector 0 
[11468.131759] Buffer I/O error on device hdc, logical block 0 
[11468.131774] Buffer I/O error on device hdc, logical block 1 
[11468.131794] Buffer I/O error on device hdc, logical block 2 
[11468.131807] Buffer I/O error on device hdc, logical block 3 
[11468.131820] Buffer I/O error on device hdc, logical block 4 
[11468.131832] Buffer I/O error on device hdc, logical block 5 
[11468.131845] Buffer I/O error on device hdc, logical block 6 
[11468.131857] Buffer I/O error on device hdc, logical block 7 
[11468.132050] hdc: tray open 
[11468.132356] end_request: I/O error, dev hdc, sector 0 
[11468.132524] hdc: tray open 
[11468.132828] end_request: I/O error, dev hdc, sector 4 
[11468.143754] hdd: tray open 
[11468.144092] end_request: I/O error, dev hdd, sector 0 
[11468.145099] hdd: tray open 
[11468.145457] end_request: I/O error, dev hdd, sector 0 
[11468.145901] hdd: tray open 
[11468.146247] end_request: I/O error, dev hdd, sector 4 
[11577.056125] usb 1-2: USB disconnect, address 2
I disconnected before damaging unit.

For mytimer I attempted cocksource=acpi_pm it didn't work, what other clocksources could I use, if any?

Code:
[ 0.214246] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.214255] * this clock source is slow. Consider trying other clock sources 
[    0.297008] PM-Timer running at invalid rate: 87% of normal - aborting.
Any information would be appreciated. Thank you

My clock is advancing 10-15 mins/hr.

Last edited by Tinkster; 09-02-2010 at 01:10 AM.
 
Old 09-02-2010, 01:03 AM   #4
EDDY1
LQ Addict
 
Registered: Mar 2010
Location: Oakland,Ca
Distribution: wins7, Debian wheezy
Posts: 6,838

Original Poster
Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
Quote:
Code:
I took the liberty to answer one of your questions by
changing your [ PHP ] tags to [ CODE ] and [ quote ] tags
respectively ... much better that way ;}

Thank you I'm going to work on that 1

Last edited by Tinkster; 09-02-2010 at 01:08 AM.
 
Old 09-02-2010, 01:09 AM   #5
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 23,066
Blog Entries: 11

Rep: Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910Reputation: 910
Hmmm ... just stop using the PHP code button?

Click on the "#" or the "speech bubble" instead
of the icon that says "PHP".

Last edited by Tinkster; 09-02-2010 at 01:11 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
compiling kernel 2nd time dell optiplex gx1 EDDY1 Linux - Newbie 7 08-28-2010 04:07 AM
Dell Optiplex 320 rnj13 Slackware - Installation 3 08-30-2007 08:38 AM
Dell Optiplex L60 Linux_Moose Linux - General 3 01-27-2007 02:55 AM
Display & Kernel Problem with Sarge on Dell Optiplex GX280 sshiv Debian 8 07-26-2005 01:41 PM
Dell Optiplex GX260 dantpt Linux - Hardware 2 09-02-2004 11:28 AM


All times are GMT -5. The time now is 02:39 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration