LinuxQuestions.org
Latest LQ Deal: Linux Power User Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 10-04-2007, 09:25 AM   #1
fakie_flip
Senior Member
 
Registered: Feb 2005
Location: San Antonio, Texas
Distribution: Gentoo Hardened using OpenRC not Systemd
Posts: 1,452

Rep: Reputation: 85
Question Default resolution


I cannot get my resolution to be 1280x1024 after logging into kde, but I can change it afterwards. How can I get it to start at 1280x1024 each time I log in automatically? Here is my xorg.conf.

Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:29:35 PDT 2007
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************
# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse1" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
#    ModulePath "/usr/X11R6/lib/modules"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
    FontPath        "/usr/X11R6/lib/X11/fonts/local/"
    FontPath        "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath        "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath        "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath        "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath        "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath        "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath        "/usr/X11R6/lib/X11/fonts/cyrillic/"
    FontPath        "/usr/X11R6/lib/X11/fonts/TTF/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# This loads the GLX module
    Load           "dbe"  	# Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "type1"
    Load           "freetype"
    #Load        "speedo"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.
#    Option     "AutoRepeat"    "500 5"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
#    Option     "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option     "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"
# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc101"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""
    Identifier     "Keyboard1"
    Driver         "kbd"
EndSection

Section "InputDevice"

# Identifier and driver
# protocol setting can be used when using a newer PnP mouse:
#    Option     "Protocol"      "Auto"
# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
# which is usually a symbolic link to the real device.
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"	"Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"		"9600"
#    Option "SampleRate"	"150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "ZAxisMapping" "4 5"
    Option         "Buttons" "3"
# On platforms where PnP mouse detection is supported the following
    Option         "Protocol" "IMPS/2"
# The mouse device.  The device is normally set to /dev/mouse,
    Option         "Device" "/dev/mouse"
#   Option "Device"      "/dev/psaux"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       31.5 - 150.0
    VertRefresh     75.0 - 85.0
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ViewSonic G810-3"
    HorizSync       30.0 - 97.0
    VertRefresh     50.0 - 180.0
EndSection

Section "Device"

    #VideoRam    4096
    # Insert Clocks lines here if appropriate
    Identifier     "VESA Framebuffer"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.
#   DefaultDepth 8
#   DefaultDepth 16
#   DefaultDepth 32
# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)
    Identifier     "Screen 1"
    Device         "VESA Framebuffer"
    Monitor        "My Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "1280x1024_85 +0+0; 800x600 +0+0; 640x480 +0+0"
# Removed Option "metamodes" "1280x1024_85 +0+0; 800x600 +0+0; 640x480 +0+0; 1280x1024 +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024 +0+0; 1280x1024_85 +0+0; 800x600 +0+0; 640x480 +0+0; 1024x768_85 +0+0"
EndSection
 
Old 10-04-2007, 09:58 AM   #2
doc.nice
Member
 
Registered: Oct 2004
Location: Germany
Distribution: Debian
Posts: 274

Rep: Reputation: 34
add the
Code:
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       32
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
Block to the second screen definition...

HTH,
Flo
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
default screen resolution smaller than max. resolution ?? Thoddy Linux - General 2 11-10-2005 02:33 AM
X: using larger resolution for games than default desktop resolution Jamo Linux - Games 2 04-10-2005 04:16 AM
XFre86 default resolution archlyn Linux - Software 3 02-22-2004 05:21 PM
Default Resolution marlaina1 Linux - General 1 06-01-2002 02:06 PM
How can I set the default resolution? DFrey Linux - Newbie 5 11-19-2001 03:33 AM


All times are GMT -5. The time now is 08:31 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration