CR-48/Arch/GUI

killingthemonkey · 03-30-2012, 07:10 AM

I've tried e17. No luck. Now, I've completely re-installed and tried Gnome. Exact same issue. startx takes me to a plain X. Gnome isn't starting. When I exit the desktop I see a long list of errors about fonts lacking.

Where do I go from here?

TobiSGD · 03-30-2012, 07:18 AM

Quote:

Originally Posted by killingthemonkey

startx takes me to a plain X.

That means that you don't have edited your ~/.xinitrc file, like described on the Gnome and E17 pages of the ArchWiki. If you are using Arch the ArchWiki is your best friend.

killingthemonkey · 03-30-2012, 11:29 AM

TobiSGD, That was exactly it, but now I have a different issue. I uncommented the %start gnome-session in .xinitrc. Gnome now tries to start, but goes to an screen with a fair approximation of the Sad Mac icon and a log out button.Here is my /var/log/Xorg.0.log:

Code:

[  1284.272] 
X.Org X Server 1.12.0
Release Date: 2012-03-04
[  1284.273] X Protocol Version 11, Revision 0
[  1284.273] Build Operating System: Linux 3.2.9-1-ARCH x86_64 
[  1284.273] Current Operating System: Linux myhost 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[  1284.273] Kernel command line: root=/dev/disk/by-uuid/c25d23cb-ea9a-4cec-8699-e89dd6321de8 ro
[  1284.273] Build Date: 05 March 2012  05:59:48AM
[  1284.273]  
[  1284.273] Current version of pixman: 0.24.4
[  1284.274] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1284.274] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1284.275] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 30 12:11:08 2012
[  1284.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1284.276] (==) No Layout section.  Using the first Screen section.
[  1284.276] (==) No screen section available. Using defaults.
[  1284.276] (**) |-->Screen "Default Screen Section" (0)
[  1284.276] (**) |   |-->Monitor "<default monitor>"
[  1284.276] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1284.276] (==) Automatically adding devices
[  1284.276] (==) Automatically enabling devices
[  1284.276] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[  1284.276] 	Entry deleted from font path.
[  1284.276] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[  1284.276] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1284.276] 	Entry deleted from font path.
[  1284.276] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1284.276] 	Entry deleted from font path.
[  1284.276] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1284.276] 	Entry deleted from font path.
[  1284.276] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1284.276] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1284.276] 	Entry deleted from font path.
[  1284.276] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1284.276] (==) FontPath set to:
	/usr/share/fonts/TTF/
[  1284.277] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1284.277] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1284.277] (II) Loader magic: 0x7cef60
[  1284.277] (II) Module ABI versions:
[  1284.277] 	X.Org ANSI C Emulation: 0.4
[  1284.277] 	X.Org Video Driver: 12.0
[  1284.277] 	X.Org XInput driver : 16.0
[  1284.277] 	X.Org Server Extension : 6.0
[  1284.279] (--) PCI:*(0:0:2:0) 8086:a011:0537:2852 rev 0, Mem @ 0x98180000/524288, 0x80000000/268435456, 0x98000000/1048576, I/O @ 0x000050c0/8
[  1284.279] (--) PCI: (0:0:2:1) 8086:a012:0537:2852 rev 0, Mem @ 0x98100000/524288
[  1284.279] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1284.279] (II) LoadModule: "extmod"
[  1284.279] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1284.280] (II) Module extmod: vendor="X.Org Foundation"
[  1284.280] 	compiled for 1.12.0, module version = 1.0.0
[  1284.280] 	Module class: X.Org Server Extension
[  1284.280] 	ABI class: X.Org Server Extension, version 6.0
[  1284.280] (II) Loading extension MIT-SCREEN-SAVER
[  1284.280] (II) Loading extension XFree86-VidModeExtension
[  1284.280] (II) Loading extension XFree86-DGA
[  1284.280] (II) Loading extension DPMS
[  1284.280] (II) Loading extension XVideo
[  1284.280] (II) Loading extension XVideo-MotionCompensation
[  1284.280] (II) Loading extension X-Resource
[  1284.280] (II) LoadModule: "dbe"
[  1284.280] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1284.281] (II) Module dbe: vendor="X.Org Foundation"
[  1284.281] 	compiled for 1.12.0, module version = 1.0.0
[  1284.281] 	Module class: X.Org Server Extension
[  1284.281] 	ABI class: X.Org Server Extension, version 6.0
[  1284.281] (II) Loading extension DOUBLE-BUFFER
[  1284.281] (II) LoadModule: "glx"
[  1284.281] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1284.281] (II) Module glx: vendor="X.Org Foundation"
[  1284.281] 	compiled for 1.12.0, module version = 1.0.0
[  1284.281] 	ABI class: X.Org Server Extension, version 6.0
[  1284.281] (==) AIGLX enabled
[  1284.282] (II) Loading extension GLX
[  1284.282] (II) LoadModule: "record"
[  1284.282] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1284.282] (II) Module record: vendor="X.Org Foundation"
[  1284.282] 	compiled for 1.12.0, module version = 1.13.0
[  1284.282] 	Module class: X.Org Server Extension
[  1284.282] 	ABI class: X.Org Server Extension, version 6.0
[  1284.282] (II) Loading extension RECORD
[  1284.282] (II) LoadModule: "dri"
[  1284.283] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1284.283] (II) Module dri: vendor="X.Org Foundation"
[  1284.283] 	compiled for 1.12.0, module version = 1.0.0
[  1284.283] 	ABI class: X.Org Server Extension, version 6.0
[  1284.283] (II) Loading extension XFree86-DRI
[  1284.283] (II) LoadModule: "dri2"
[  1284.284] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1284.284] (II) Module dri2: vendor="X.Org Foundation"
[  1284.284] 	compiled for 1.12.0, module version = 1.2.0
[  1284.284] 	ABI class: X.Org Server Extension, version 6.0
[  1284.284] (II) Loading extension DRI2
[  1284.284] (==) Matched intel as autoconfigured driver 0
[  1284.284] (==) Matched vesa as autoconfigured driver 1
[  1284.284] (==) Matched fbdev as autoconfigured driver 2
[  1284.284] (==) Assigned the driver to the xf86ConfigLayout
[  1284.284] (II) LoadModule: "intel"
[  1284.284] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1284.285] (II) Module intel: vendor="X.Org Foundation"
[  1284.285] 	compiled for 1.11.99.903, module version = 2.18.0
[  1284.285] 	Module class: X.Org Video Driver
[  1284.285] 	ABI class: X.Org Video Driver, version 12.0
[  1284.285] (II) LoadModule: "vesa"
[  1284.286] (WW) Warning, couldn't open module vesa
[  1284.286] (II) UnloadModule: "vesa"
[  1284.286] (II) Unloading vesa
[  1284.286] (EE) Failed to load module "vesa" (module does not exist, 0)
[  1284.286] (II) LoadModule: "fbdev"
[  1284.286] (WW) Warning, couldn't open module fbdev
[  1284.286] (II) UnloadModule: "fbdev"
[  1284.287] (II) Unloading fbdev
[  1284.287] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1284.287] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[  1284.287] (--) using VT number 7

[  1284.306] drmOpenDevice: node name is /dev/dri/card0
[  1284.307] drmOpenDevice: open result is 8, (OK)
[  1284.307] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[  1284.307] drmOpenDevice: node name is /dev/dri/card0
[  1284.307] drmOpenDevice: open result is 8, (OK)
[  1284.307] drmOpenByBusid: drmOpenMinor returns 8
[  1284.307] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[  1284.307] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1284.307] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1284.307] (==) intel(0): RGB weight 888
[  1284.307] (==) intel(0): Default visual is TrueColor
[  1284.307] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[  1284.307] (--) intel(0): Chipset: "Pineview GM"
[  1284.307] (**) intel(0): Relaxed fencing enabled
[  1284.307] (**) intel(0): Wait on SwapBuffers? enabled
[  1284.307] (**) intel(0): Triple buffering? enabled
[  1284.307] (**) intel(0): Framebuffer tiled
[  1284.307] (**) intel(0): Pixmaps tiled
[  1284.307] (**) intel(0): 3D buffers tiled
[  1284.307] (**) intel(0): SwapBuffers wait enabled
[  1284.307] (==) intel(0): video overlay key set to 0x101fe
[  1284.308] (II) intel(0): Output LVDS1 has no monitor section
[  1284.308] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[  1284.340] (II) intel(0): Output VGA1 has no monitor section
[  1284.340] (II) intel(0): EDID for output LVDS1
[  1284.340] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[  1284.340] (II) intel(0): Year: 2010  Week: 0
[  1284.340] (II) intel(0): EDID Version: 1.3
[  1284.340] (II) intel(0): Digital Display Input
[  1284.340] (II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 16
[  1284.340] (II) intel(0): Gamma: 2.20
[  1284.340] (II) intel(0): No DPMS capabilities specified
[  1284.340] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1284.340] (II) intel(0): First detailed timing is preferred mode
[  1284.340] (II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[  1284.340] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[  1284.340] (II) intel(0): Manufacturer's mask: 0
[  1284.340] (II) intel(0): Supported detailed timing:
[  1284.340] (II) intel(0): clock: 69.3 MHz   Image Size:  261 x 163 mm
[  1284.340] (II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1402 h_border: 0
[  1284.340] (II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 824 v_border: 0
[  1284.340] (II) intel(0): Unknown vendor-specific block f
[  1284.340] (II) intel(0):  SAMSUNG
[  1284.340] (II) intel(0):  121AT10-301
[  1284.340] (II) intel(0): EDID (in hex):
[  1284.340] (II) intel(0): 	00ffffffffffff004ca3415400000000
[  1284.340] (II) intel(0): 	00140103801a10780a87f594574f8c27
[  1284.340] (II) intel(0): 	27505400000001010101010101010101
[  1284.340] (II) intel(0): 	010101010101121b007a502018301030
[  1284.341] (II) intel(0): 	130005a3100000190000000f00000000
[  1284.341] (II) intel(0): 	00000000002387026400000000fe0053
[  1284.341] (II) intel(0): 	414d53554e470a2020202020000000fe
[  1284.341] (II) intel(0): 	00313231415431302d3330310a20001f
[  1284.341] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1284.341] (II) intel(0): Printing DDC gathered Modelines:
[  1284.341] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1284.341] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  1284.341] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  1284.341] (II) intel(0): Printing probed modes for output LVDS1
[  1284.341] (II) intel(0): Modeline "1280x800"x60.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1284.341] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  1284.341] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  1284.341] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  1284.341] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  1284.373] (II) intel(0): EDID for output VGA1
[  1284.373] (II) intel(0): Output LVDS1 connected
[  1284.373] (II) intel(0): Output VGA1 disconnected
[  1284.373] (II) intel(0): Using exact sizes for initial modes
[  1284.373] (II) intel(0): Output LVDS1 using initial mode 1280x800
[  1284.373] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1284.373] (II) intel(0): Kernel page flipping support detected, enabling
[  1284.373] (**) intel(0): Display dimensions: (260, 160) mm
[  1284.373] (**) intel(0): DPI set to (125, 127)
[  1284.373] (II) Loading sub module "fb"
[  1284.373] (II) LoadModule: "fb"
[  1284.374] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1284.374] (II) Module fb: vendor="X.Org Foundation"
[  1284.374] 	compiled for 1.12.0, module version = 1.0.0
[  1284.374] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1284.374] (II) Loading sub module "dri2"
[  1284.375] (II) LoadModule: "dri2"
[  1284.375] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1284.375] (II) Module dri2: vendor="X.Org Foundation"
[  1284.375] 	compiled for 1.12.0, module version = 1.2.0
[  1284.375] 	ABI class: X.Org Server Extension, version 6.0
[  1284.375] (==) Depth 24 pixmap format is 32 bpp
[  1284.375] (II) intel(0): [DRI2] Setup complete
[  1284.375] (II) intel(0): [DRI2]   DRI driver: i915
[  1284.375] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[  1284.375] (II) UXA(0): Driver registered support for the following operations:
[  1284.376] (II)         solid
[  1284.376] (II)         copy
[  1284.376] (II)         composite (RENDER acceleration)
[  1284.376] (II)         put_image
[  1284.376] (II)         get_image
[  1284.376] (==) intel(0): Backing store disabled
[  1284.376] (==) intel(0): Silken mouse enabled
[  1284.376] (II) intel(0): Initializing HW Cursor
[  1284.396] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1284.398] (==) intel(0): DPMS enabled
[  1284.398] (==) intel(0): Intel XvMC decoder disabled
[  1284.398] (II) intel(0): Set up textured video
[  1284.398] (II) intel(0): Set up overlay video
[  1284.398] (II) intel(0): direct rendering: DRI2 Enabled
[  1284.398] (==) intel(0): hotplug detection: "enabled"
[  1284.399] (--) RandR disabled
[  1284.399] (II) Initializing built-in extension Generic Event Extension
[  1284.399] (II) Initializing built-in extension SHAPE
[  1284.399] (II) Initializing built-in extension MIT-SHM
[  1284.399] (II) Initializing built-in extension XInputExtension
[  1284.399] (II) Initializing built-in extension XTEST
[  1284.399] (II) Initializing built-in extension BIG-REQUESTS
[  1284.399] (II) Initializing built-in extension SYNC
[  1284.399] (II) Initializing built-in extension XKEYBOARD
[  1284.399] (II) Initializing built-in extension XC-MISC
[  1284.399] (II) Initializing built-in extension SECURITY
[  1284.399] (II) Initializing built-in extension XINERAMA
[  1284.399] (II) Initializing built-in extension XFIXES
[  1284.399] (II) Initializing built-in extension RENDER
[  1284.399] (II) Initializing built-in extension RANDR
[  1284.399] (II) Initializing built-in extension COMPOSITE
[  1284.399] (II) Initializing built-in extension DAMAGE
[  1284.429] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1284.429] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1284.429] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1284.429] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1284.430] (II) AIGLX: Loaded and initialized i915
[  1284.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1284.431] (II) intel(0): Setting screen physical size to 338 x 211
[  1284.540] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  1284.540] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1284.540] (II) LoadModule: "evdev"
[  1284.540] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1284.541] (II) Module evdev: vendor="X.Org Foundation"
[  1284.541] 	compiled for 1.12.0, module version = 2.7.0
[  1284.541] 	Module class: X.Org XInput Driver
[  1284.541] 	ABI class: X.Org XInput driver, version 16.0
[  1284.541] (II) Using input driver 'evdev' for 'Power Button'
[  1284.541] (**) Power Button: always reports core events
[  1284.541] (**) evdev: Power Button: Device: "/dev/input/event4"
[  1284.541] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1284.541] (--) evdev: Power Button: Found keys
[  1284.541] (II) evdev: Power Button: Configuring as keyboard
[  1284.541] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[  1284.541] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1284.541] (**) Option "xkb_rules" "evdev"
[  1284.541] (**) Option "xkb_model" "evdev"
[  1284.541] (**) Option "xkb_layout" "us"
[  1284.631] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[  1284.631] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1284.632] (II) Using input driver 'evdev' for 'Video Bus'
[  1284.632] (**) Video Bus: always reports core events
[  1284.632] (**) evdev: Video Bus: Device: "/dev/input/event11"
[  1284.632] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1284.632] (--) evdev: Video Bus: Found keys
[  1284.632] (II) evdev: Video Bus: Configuring as keyboard
[  1284.632] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[  1284.632] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1284.632] (**) Option "xkb_rules" "evdev"
[  1284.632] (**) Option "xkb_model" "evdev"
[  1284.632] (**) Option "xkb_layout" "us"
[  1284.633] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1284.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1284.634] (II) Using input driver 'evdev' for 'Power Button'
[  1284.634] (**) Power Button: always reports core events
[  1284.634] (**) evdev: Power Button: Device: "/dev/input/event1"
[  1284.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1284.634] (--) evdev: Power Button: Found keys
[  1284.634] (II) evdev: Power Button: Configuring as keyboard
[  1284.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[  1284.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1284.634] (**) Option "xkb_rules" "evdev"
[  1284.634] (**) Option "xkb_model" "evdev"
[  1284.634] (**) Option "xkb_layout" "us"
[  1284.635] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[  1284.635] (II) No input driver specified, ignoring this device.
[  1284.635] (II) This device may have been added with another device file.
[  1284.636] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  1284.636] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1284.636] (II) Using input driver 'evdev' for 'Sleep Button'
[  1284.636] (**) Sleep Button: always reports core events
[  1284.636] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[  1284.637] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  1284.637] (--) evdev: Sleep Button: Found keys
[  1284.637] (II) evdev: Sleep Button: Configuring as keyboard
[  1284.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[  1284.637] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  1284.637] (**) Option "xkb_rules" "evdev"
[  1284.637] (**) Option "xkb_model" "evdev"
[  1284.637] (**) Option "xkb_layout" "us"
[  1284.638] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[  1284.638] (II) No input driver specified, ignoring this device.
[  1284.638] (II) This device may have been added with another device file.
[  1284.639] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[  1284.639] (II) No input driver specified, ignoring this device.
[  1284.639] (II) This device may have been added with another device file.
[  1284.640] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[  1284.640] (II) No input driver specified, ignoring this device.
[  1284.640] (II) This device may have been added with another device file.
[  1284.641] (II) config/udev: Adding input device Mario Webcam (/dev/input/event6)
[  1284.641] (**) Mario Webcam: Applying InputClass "evdev keyboard catchall"
[  1284.641] (II) Using input driver 'evdev' for 'Mario Webcam'
[  1284.641] (**) Mario Webcam: always reports core events
[  1284.641] (**) evdev: Mario Webcam: Device: "/dev/input/event6"
[  1284.641] (--) evdev: Mario Webcam: Vendor 0x4f2 Product 0xb262
[  1284.641] (--) evdev: Mario Webcam: Found keys
[  1284.641] (II) evdev: Mario Webcam: Configuring as keyboard
[  1284.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6/event6"
[  1284.641] (II) XINPUT: Adding extended input device "Mario Webcam" (type: KEYBOARD, id 10)
[  1284.641] (**) Option "xkb_rules" "evdev"
[  1284.641] (**) Option "xkb_model" "evdev"
[  1284.641] (**) Option "xkb_layout" "us"
[  1284.643] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1284.643] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1284.643] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1284.643] (**) AT Translated Set 2 keyboard: always reports core events
[  1284.643] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1284.643] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1284.643] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1284.643] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1284.643] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1284.643] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  1284.643] (**) Option "xkb_rules" "evdev"
[  1284.643] (**) Option "xkb_model" "evdev"
[  1284.643] (**) Option "xkb_layout" "us"
[  1284.645] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[  1284.645] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1284.645] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1284.645] (II) LoadModule: "synaptics"
[  1284.645] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1284.646] (II) Module synaptics: vendor="X.Org Foundation"
[  1284.646] 	compiled for 1.12.0, module version = 1.5.99
[  1284.646] 	Module class: X.Org XInput Driver
[  1284.646] 	ABI class: X.Org XInput driver, version 16.0
[  1284.646] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1284.646] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1284.646] (**) Option "Device" "/dev/input/event10"
[  1284.753] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[  1284.753] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[  1284.753] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5738
[  1284.753] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4802
[  1284.753] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1284.753] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1284.753] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[  1284.753] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1284.753] (**) Option "TapButton1" "1"
[  1284.753] (**) Option "TapButton2" "2"
[  1284.753] (**) Option "TapButton3" "3"
[  1284.754] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1284.754] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1284.860] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[  1284.860] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[  1284.860] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1284.860] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  1284.860] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[  1284.861] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1284.861] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1284.861] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1284.861] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1284.861] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1284.862] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  1284.862] (II) No input driver specified, ignoring this device.
[  1284.862] (II) This device may have been added with another device file.
[  1284.863] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  1284.863] (II) No input driver specified, ignoring this device.
[  1284.863] (II) This device may have been added with another device file.
[  1285.749] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1285.749] (II) intel(0): Printing DDC gathered Modelines:
[  1285.749] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1285.833] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1285.834] (II) intel(0): Printing DDC gathered Modelines:
[  1285.834] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1285.869] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1285.869] (II) intel(0): Printing DDC gathered Modelines:
[  1285.869] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1285.900] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1285.900] (II) intel(0): Printing DDC gathered Modelines:
[  1285.900] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1285.937] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1285.937] (II) intel(0): Printing DDC gathered Modelines:
[  1285.937] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1287.115] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1287.115] (II) intel(0): Printing DDC gathered Modelines:
[  1287.115] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1287.389] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1287.389] (II) intel(0): Printing DDC gathered Modelines:
[  1287.389] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1287.441] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1287.441] (II) intel(0): Printing DDC gathered Modelines:
[  1287.441] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1287.487] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1287.487] (II) intel(0): Printing DDC gathered Modelines:
[  1287.487] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1287.528] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1287.528] (II) intel(0): Printing DDC gathered Modelines:
[  1287.528] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1288.537] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1288.537] (II) intel(0): Printing DDC gathered Modelines:
[  1288.538] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1402  800 801 804 824 -hsync -vsync (49.4 kHz eP)
[  1293.586] (II) evdev: Power Button: Close
[  1294.008] Server terminated successfully (0). Closing log file.

Note, I cut out the modules unloading. Max 30000 characters in a post.

TobiSGD · 03-30-2012, 11:43 AM

I don't know much of Gnome, so I can't really help here. May it be possible that you just have installed a barebone Gnome only?

killingthemonkey · 03-30-2012, 11:50 AM

Quote:

Originally Posted by TobiSGD

I don't know much of Gnome, so I can't really help here. May it be possible that you just have installed a barebone Gnome only?

There is definitely that possibility, but I have no idea what to do next. I guess it's back to the Arch Wiki Gnome page to see if there is anything I missed.

killingthemonkey · 03-30-2012, 03:02 PM

Well, the Gnome wiki is useless and the Arch wiki is not far behind.