LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 01-04-2012, 08:15 PM   #16
aletta
Member
 
Registered: Dec 2011
Location: Vancouver, BC Canada
Distribution: Centos 6.3
Posts: 48

Original Poster
Rep: Reputation: Disabled

Iǘe been working at setting up a really good fast and secure system. So far Ive managed to correctly install the Nvidia driver which was causing some grief. Iǘe also managed to set up all the java once could need on one system, who knew a little dot at the end had so much power - that took me a whole day to figure out. I am learning, but still not a working tablet. I know I am having difficulty compiling a proper xorg.conf file:
Code:
<height=5># nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 290.10  (buildmeister@swio-display-x86-rhel47-07.nvidia.com)  Wed Nov 16 18:46:42 PST 2011

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 290.10  (buildmeister@swio-display-x86-rhel47-07.nvidia.com)  Wed Nov 16 18:47:40 PST 2011

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    ModulePath      "/usr/lib64/xorg/modules/extensions/nvidia"
    ModulePath      "/usr/lib64/xorg/modules"
    FontPath        "catalogue:/etc/X11/fontpath.d"
    FontPath        "built-ins"
EndSection

Section "Module"
    Load           "record"
    Load           "glx"
    Load           "vnc"
    Load           "dri2"
    Load           "extmod"
    Load           "dbe"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL1716"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier     "Card1"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier     "Card2"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "Rotate"                 # <str>
        #Option     "fbdev"                  # <str>
        #Option     "debug"                  # [<bool>]
    Identifier     "Card3"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier     "Card4"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6100"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Card1"
    Monitor        "Monitor1"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Card2"
    Monitor        "Monitor2"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Card3"
    Monitor        "Monitor3"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Card4"
    Monitor        "Monitor4"# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 290.10  (buildmeister@swio-display-x86-rhel47-07.nvidia.com)  Wed Nov 16 18:46:42 PST 2011

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 290.10  (buildmeister@swio-display-x86-rhel47-07.nvidia.com)  Wed Nov 16 18:47:40 PST 2011

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    ModulePath      "/usr/lib64/xorg/modules/extensions/nvidia"
    ModulePath      "/usr/lib64/xorg/modules"
    FontPath        "catalogue:/etc/X11/fontpath.d"
    FontPath        "built-ins"
EndSection

Section "Module"
    Load           "record"
    Load           "glx"
    Load           "vnc"
    Load           "dri2"
    Load           "extmod"
    Load           "dbe"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL1716"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier     "Card1"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier     "Card2"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "Rotate"                 # <str>
        #Option     "fbdev"                  # <str>
        #Option     "debug"                  # [<bool>]
    Identifier     "Card3"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier     "Card4"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6100"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Card1"
    Monitor        "Monitor1"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Card2"
    Monitor        "Monitor2"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Card3"
    Monitor        "Monitor3"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 290.10  (buildmeister@swio-display-x86-rhel47-07.nvidia.com)  Wed Nov 16 18:46:42 PST 2011

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 290.10  (buildmeister@swio-display-x86-rhel47-07.nvidia.com)  Wed Nov 16 18:47:40 PST 2011

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    ModulePath      "/usr/lib64/xorg/modules/extensions/nvidia"
    ModulePath      "/usr/lib64/xorg/modules"
    FontPath        "catalogue:/etc/X11/fontpath.d"
    FontPath        "built-ins"
EndSection

Section "Module"
    Load           "record"
    Load           "glx"
    Load           "vnc"
    Load           "dri2"
    Load           "extmod"
    Load           "dbe"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL1716"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Monitor"
    Identifier     "Monitor4"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection

Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier     "Card1"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"               # [<bool>]
        #Option     "HWcursor"               # [<bool>]
        #Option     "NoAccel"                # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "UseFBDev"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "VideoKey"               # <i>
        #Option     "FlatPanel"              # [<bool>]
        #Option     "FPDither"               # [<bool>]
        #Option     "CrtcNumber"             # <i>
        #Option     "FPScale"                # [<bool>]
        #Option     "FPTweak"                # <i>
        #Option     "DualHead"               # [<bool>]
    Identifier     "Card2"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "Rotate"                 # <str>
        #Option     "fbdev"                  # <str>
        #Option     "debug"                  # [<bool>]
    Identifier     "Card3"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"               # [<bool>]
        #Option     "DefaultRefresh"         # [<bool>]
        #Option     "ModeSetClearScreen"     # [<bool>]
    Identifier     "Card4"
    Driver         "nvidia"
    BusID          "PCI:0:5:0"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6100"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Card1"
    Monitor        "Monitor1"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Card2"
    Monitor        "Monitor2"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Card3"
    Monitor        "Monitor3"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Card4"
    Monitor        "Monitor4"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen4"
    Device         "Card4"
    Monitor        "Monitor4"
    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection

    SubSection     "Display"
        Viewport    0 0
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       4
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       8
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       15
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
    EndSubSection
EndSection
a long way from done, wondering if there is not a manual cut and paste which would work, at least for the conf files?

I did install all the buildś Wacom related programs/drivers. I am now at 6.2 and I update daily.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] Cannot get new Wacom Bamboo Tablet 460CTL to work on my Centos 5.7 Deskto and KDE Env aletta Linux - Newbie 1 12-12-2011 05:34 AM
Wacom Bamboo Tablet not working jdlacruz Linux - Hardware 1 02-16-2011 02:37 PM
Wacom Bamboo tablet not working properly Yaeka Linux - Newbie 5 12-22-2009 04:01 PM
Tablet Wacom Bamboo series iswc_technical Linux - Hardware 3 04-07-2009 08:47 AM


All times are GMT -5. The time now is 05:23 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration