LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 06-26-2004, 06:45 PM   #1
Rolby
Member
 
Registered: Jun 2004
Distribution: atm Knoppix, trying to switch to Fedora Core 2
Posts: 38

Rep: Reputation: 15
cdrecord problems


Hi, I need some help figuring out this cdrecord stuff, I followed every step a tutorial (or howto) provided, but something went wrong, hope you guys can make something out of this (did this while in the dir of the iso):
Code:
cdrecord -v -pad speed=1 dev=0,0,0 misc1.iso
Cdrecord 2.01a16 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'AOPEN   '
Identifikation : 'CD-RW CRW5232   '
Revision       : '1.03'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   177 MB         padsize:   30 KB
Total size:      203 MB (20:08.60) = 90645 sectors
Lout start:      203 MB (20:10/45) = 90645 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -12488 (97:15/37)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 70
Manufacturer: NAN-YA Plastics Corporation
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 269204
Forcespeed is OFF.
Starting to write CD/DVD at speed 52 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01:   39 of  177 MB written (fifo  96%) [buf   6%]  34.9x.cdrecord.mmap: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 4F AE 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 4F B2 0C 00 00 00 00 10 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0
Sense flags: Blk 20402 (valid)
cmd finished after 0.011s timeout 40s

write track data: error after 41775104 bytes
cdrecord.mmap: A write error occured.
cdrecord.mmap: Please properly read the error message above.
Writing  time:   21.880s
Average write speed  86.7x.
Min drive buffer fill was 6%
Fixating...
Fixating time:   16.740s
cdrecord.mmap: fifo had 722 puts and 659 gets.
cdrecord.mmap: fifo was 0 times empty and 257 times full, min fill was 95%.
TIA,
Rolby
 
Old 06-26-2004, 10:40 PM   #2
dxdad
Member
 
Registered: Aug 2003
Distribution: Slackware
Posts: 75

Rep: Reputation: 15
I would add a "-v driveropts=burnfree" and try again.
 
Old 06-26-2004, 11:04 PM   #3
mascdman
Member
 
Registered: Jun 2004
Location: Canada
Distribution: Ubuntu 6.06 LTS
Posts: 152

Rep: Reputation: 30
Quote:
cdrecord.mmap: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 4F AE 00 00 1F 00
Just a bad CD? I also agree with dxdad's burnfree suggestion.

--mascdman
 
Old 06-27-2004, 06:25 AM   #4
Rolby
Member
 
Registered: Jun 2004
Distribution: atm Knoppix, trying to switch to Fedora Core 2
Posts: 38

Original Poster
Rep: Reputation: 15
I'll try that then, hope it works. And I'm sure it can't be a bad cd, since I've been using these cd's for about a year now, thank god for cheap cd's in Germany (100 for 15 bucks).

TIA,
Rolby
 
Old 06-27-2004, 06:37 AM   #5
Rolby
Member
 
Registered: Jun 2004
Distribution: atm Knoppix, trying to switch to Fedora Core 2
Posts: 38

Original Poster
Rep: Reputation: 15
Great, it burnt the cd, but now I can't eject . It says it's mounted multiple times (don't know why) and when I use "umount /cdrom" it says the device is busy. Now is it me, or do the cd-rom-fairies not like me?

TIA,
Rp;by
 
Old 06-27-2004, 04:23 PM   #6
mascdman
Member
 
Registered: Jun 2004
Location: Canada
Distribution: Ubuntu 6.06 LTS
Posts: 152

Rep: Reputation: 30
You can still get a bad CD in a great brand -- buy enough and the odds start working against you. I've got 13 spindles next to me, all the same brand and the latest spindle I bought had two coasters. Never had a problem with any other spindle.

Anyways, about the multiple mounting thing, if you have lsof installed, just run lsof /cdrom and it'll show every process that has an open file on the cdrom. Close the program (or just kill it) and try unmounting again. You could also try umount -f.

--mascdman
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
cdrecord problems stevsom Linux - Software 6 10-25-2005 05:40 PM
Problems with cdrecord. . . wnaLinux Slackware 13 11-14-2004 11:40 PM
problems with cdrecord cf050 Linux - Newbie 5 06-14-2004 01:55 AM
Problems with cdrecord gschrade Linux - Newbie 3 01-26-2004 07:51 PM
cdrecord problems GZimm Linux - General 1 07-14-2003 07:47 PM


All times are GMT -5. The time now is 12:45 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration