Cant move mouse after sleep(Ubuntu, Mint)

jaapjaa · 09-10-2016, 04:46 PM

Hello,

Today I finally decided to switch from Linux to Ubuntu.
I did fully install Ubuntu, but everytime my notebook goes in sleepmode and wakes up my mouse will not work anymore. When I do a reboot it works fine until I let it sleep (even if its for 10sec).

So I was like oke no Ubuntu for me so I downloaded Mint and did install it, even with mint I got the same problem im trying to fix it for the whole day without any succes.
I hope you guys can help me!

Notebook:
Asus laptop

On almost all forum post this was the fix:
sudo apt-get install --reinstall xserver-xorg-input-all

But not for me..

rokytnji · 09-10-2016, 10:32 PM

You have enough ram memory? What does terminal say?

Code:

inxi -Fxx

And the last section in terminal output of

Code:

dmesg

That shows what is happening with the touchpad/mouse?

jaapjaa · 09-11-2016, 01:51 AM

Hello, Thanks for the respond.
joey@Joey-PC ~ $ inxi -Fxx

Quote:

System: Host: Joey-PC Kernel: 4.4.0-21-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: Cinnamon 3.0.6 (Gtk 3.18.9-1ubuntu3.1) dm: mdm
Distro: Linux Mint 18 Sarah
Machine: System: ASUSTeK (portable) product: K501LB v: 1.0
Mobo: ASUSTeK model: K501LB v: 1.0
Bios: American Megatrends v: K501LB.204 date: 08/05/2015
CPU: Dual core Intel Core i7-5500U (-HT-MCP-) cache: 4096 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9577
clock speeds: min/max: 500/3000 MHz 1: 2316 MHz 2: 2397 MHz
3: 2383 MHz 4: 2393 MHz
Graphics: Card-1: Intel Broadwell-U Integrated Graphics
bus-ID: 00:02.0 chip-ID: 8086:1616
Card-2: NVIDIA GM107M [GeForce 940M]
bus-ID: 04:00.0 chip-ID: 10de:139c
Display Server: X.Org 1.18.3 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau
Resolution: 1920x1080@60.05hz
GLX Renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2)
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card-1 Intel Wildcat Point-LP High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
Card-2 Intel Broadwell-U Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:160c
Sound: Advanced Linux Sound Architecture v: k4.4.0-21-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 4000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: down mac: 1c:b7:2c:e7:46:66
Card-2: Qualcomm Atheros AR9462 Wireless Network Adapter
driver: ath9k bus-ID: 03:00.0 chip-ID: 168c:0034
IF: wlp3s0 state: up mac: 28:c2:dd:f8:f7:41
Drives: HDD Total Size: 1000.2GB (15.8% used)
ID-1: /dev/sda model: HGST_HTS541010A7 size: 1000.2GB serial: S00001SSGX7LXF
Partition: ID-1: / size: 909G used: 140G (17%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 8.49GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 39.0C mobo: N/A
Fan Speeds (in rpm): cpu: 0
Info: Processes: 207 Uptime: 3 min Memory: 974.0/7886.5MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.3.1
Client: Shell (bash 4.3.421 running in gnome-terminal-) inxi: 2.2.35

I hope I got the right section:

Quote:

3.513496] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.856781] random: nonblocking pool is initialized
[ 4.571099] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.571234] systemd[1]: Detected architecture x86-64.
[ 4.581927] systemd[1]: Set hostname to <Joey-PC>.
[ 5.444102] systemd[1]: Listening on Syslog Socket.
[ 5.444157] systemd[1]: Reached target User and Group Name Lookups.
[ 5.444195] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.444257] systemd[1]: Listening on Journal Audit Socket.
[ 5.444287] systemd[1]: Listening on udev Control Socket.
[ 5.444310] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.444327] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.444354] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.444382] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.444399] systemd[1]: Listening on LVM2 poll daemon socket.
[ 5.444431] systemd[1]: Listening on Journal Socket.
[ 5.444452] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.444571] systemd[1]: Created slice System Slice.
[ 5.455631] systemd[1]: Starting Uncomplicated firewall...
[ 5.456025] systemd[1]: Mounting Huge Pages File System...
[ 5.456131] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.456221] systemd[1]: Created slice system-getty.slice.
[ 5.456536] systemd[1]: Started Read required files in advance.
[ 5.457039] systemd[1]: Mounting Debug File System...
[ 5.457379] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.457417] systemd[1]: Reached target Remote File Systems.
[ 5.457766] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 5.458173] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.458200] systemd[1]: Reached target Encrypted Volumes.
[ 5.458352] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.583778] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.595544] systemd[1]: Starting Journal Service...
[ 5.597794] systemd[1]: Starting Load Kernel Modules...
[ 5.597884] systemd[1]: Created slice User and Session Slice.
[ 5.597900] systemd[1]: Reached target Slices.
[ 5.598226] systemd[1]: Starting Braille Device Support...
[ 5.598257] systemd[1]: Listening on udev Kernel Socket.
[ 5.599202] systemd[1]: Started Uncomplicated firewall.
[ 5.721887] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.727625] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.209636] systemd[1]: Mounted Huge Pages File System.
[ 6.209702] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.209733] systemd[1]: Mounted Debug File System.
[ 6.235622] systemd[1]: Started LVM2 metadata daemon.
[ 6.282368] lp: driver loaded but no devices found
[ 6.306658] ppdev: user-space parallel port driver
[ 6.443078] systemd[1]: Started Load Kernel Modules.
[ 6.451669] systemd[1]: Starting Apply Kernel Variables...
[ 6.452051] systemd[1]: Mounting FUSE Control File System...
[ 6.453550] systemd[1]: Mounted FUSE Control File System.
[ 6.494763] systemd[1]: Started Journal Service.
[ 7.807580] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 7.807892] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 7.807896] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 7.808058] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 7.808060] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 7.808082] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 7.809995] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 8.322962] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.492235] systemd-journald[332]: Received request to flush runtime journal from PID 1
[ 9.039435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.442289] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 9.487603] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.517959] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.517964] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.517966] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.517968] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 9.517970] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 9.517972] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b
[ 9.525625] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1f40822c)
[ 9.548197] AVX2 version of gcm_enc/dec engaged.
[ 9.548200] AES CTR mode by8 optimization enabled
[ 9.556450] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 9.560892] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 9.589430] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 9.589473] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 9.589510] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 9.977893] ath: phy0: ASPM enabled: 0x43
[ 9.977897] ath: EEPROM regdomain: 0x6a
[ 9.977898] ath: EEPROM indicates we should expect a direct regpair map
[ 9.977900] ath: Country alpha2 being used: 00
[ 9.977901] ath: Regpair used: 0x6a
[ 10.014038] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.014257] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001600000, irq=19
[ 10.067455] asus_wmi: ASUS WMI generic driver loaded
[ 10.077276] asus_wmi: Initialization: 0x1
[ 10.077303] asus_wmi: BIOS WMI version: 7.9
[ 10.077329] asus_wmi: SFUN value: 0xa0077
[ 10.077912] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input12
[ 10.078939] asus_wmi: Number of fans: 1
[ 10.110139] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 10.268951] intel_rapl: Found RAPL domain package
[ 10.268955] intel_rapl: Found RAPL domain core
[ 10.268957] intel_rapl: Found RAPL domain uncore
[ 10.268960] intel_rapl: Found RAPL domain dram
[ 10.268965] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 10.268969] intel_rapl: RAPL package 0 domain dram locked by BIOS
[ 11.082293] media: Linux media interface: v0.10
[ 11.221944] Linux video capture interface: v2.00
[ 11.300027] Bluetooth: Core ver 2.21
[ 11.300039] NET: Registered protocol family 31
[ 11.300040] Bluetooth: HCI device and connection manager initialized
[ 11.300042] Bluetooth: HCI socket layer initialized
[ 11.300044] Bluetooth: L2CAP socket layer initialized
[ 11.300047] Bluetooth: SCO socket layer initialized
[ 11.356785] usbcore: registered new interface driver btusb
[ 11.361573] usbcore: registered new interface driver ath3k
[ 11.379072] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b483)
[ 11.385823] cfg80211: World regulatory domain updated:
[ 11.385826] cfg80211: DFS Master region: unset
[ 11.385828] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.385831] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.385833] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.385835] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.385838] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.385840] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.385842] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.385844] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.385847] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.385954] input: USB2.0 VGA UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
[ 11.386024] usbcore: registered new interface driver uvcvideo
[ 11.386026] USB Video Class driver (1.1.1)
[ 13.768483] Adding 8288252k swap on /dev/sda3. Priority:-1 extents:1 across:8288252k FS
[ 14.386240] cgroup: new mount options do not match the existing superblock, will be ignored
[ 14.831876] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 14.832172] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 14.832177] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 14.832341] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 14.832343] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 14.832368] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 14.834289] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 16.539322] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 16.622677] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1f40822c)
[ 16.653507] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 16.797478] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.797480] Bluetooth: BNEP filters: protocol multicast
[ 16.797484] Bluetooth: BNEP socket layer initialized
[ 19.362916] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 19.510250] r8169 0000:02:00.0 enp2s0: link down
[ 19.510314] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 19.553994] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 19.565567] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 20.322893] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 21.824243] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 21.824557] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 21.824561] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 21.824724] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 21.824726] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 21.824751] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 21.826690] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 23.748694] wlp3s0: authenticate with bc:f2:af:9a:8f:8d
[ 23.758943] wlp3s0: send auth to bc:f2:af:9a:8f:8d (try 1/3)
[ 23.767378] wlp3s0: authenticated
[ 23.768267] wlp3s0: associate with bc:f2:af:9a:8f:8d (try 1/3)
[ 23.778188] wlp3s0: RX AssocResp from bc:f2:af:9a:8f:8d (capab=0x431 status=0 aid=2)
[ 23.778301] wlp3s0: associated
[ 23.778326] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 26.925584] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 26.931487] vboxdrv: Found 4 processor cores
[ 26.948544] vboxdrv: TSC mode is Invariant, tentative frequency 2394454904 Hz
[ 26.948544] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[ 26.952111] VBoxNetFlt: Successfully started.
[ 26.955339] VBoxNetAdp: Successfully started.
[ 26.958763] VBoxPciLinuxInit
[ 26.960521] vboxpci: IOMMU not found (not registered)
[ 28.067228] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 28.150554] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
[ 28.181487] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 33.824724] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 33.824976] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 33.824979] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 33.825115] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 33.825117] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 33.825141] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 33.827070] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 45.092576] Bluetooth: RFCOMM TTY layer initialized
[ 45.092583] Bluetooth: RFCOMM socket layer initialized
[ 45.092586] Bluetooth: RFCOMM ver 1.11
[ 204.984426] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 205.067747] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
[ 205.098635] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 210.989903] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 210.990197] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 210.990201] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 210.990368] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 210.990370] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 210.990394] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 210.992323] nouveau 0000:04:00.0: DRM: suspending kernel object tree...

boog321 · 09-11-2016, 09:19 AM

Will pressing Ctrl-Alt-F1 then Ctrl-Alt-F7 restore it? Ctrl-Alt-F1 will take you to a terminal, Ctrl-Alt-F7 should bring you back to the gui.

If so, look here: https://bugs.launchpad.net/ubuntu/+bug/1573454

it might be lightlocker causing the bug.

Many from the above link say the solution is:

sudo apt-get remove light-locker
sudo apt-get install xscreensaver

jaapjaa · 09-11-2016, 10:35 AM

Thanks for respond

My screen is not frozing so I can use the Cnrl + alt commandos, its only my mouse that freezes until reboot.
Package 'light-locker' is not installed, so not removed

Quote:

joey@Joey-PC ~ $ inxi -Fxx
System: Host: Joey-PC Kernel: 4.4.0-21-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: Cinnamon 3.0.6 (Gtk 3.18.9-1ubuntu3.1) dm: mdm
Distro: Linux Mint 18 Sarah
Machine: System: ASUSTeK (portable) product: K501LB v: 1.0
Mobo: ASUSTeK model: K501LB v: 1.0
Bios: American Megatrends v: K501LB.204 date: 08/05/2015
CPU: Dual core Intel Core i7-5500U (-HT-MCP-) cache: 4096 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9578
clock speeds: min/max: 500/3000 MHz 1: 1634 MHz 2: 2582 MHz
3: 1547 MHz 4: 1898 MHz
Graphics: Card-1: Intel Broadwell-U Integrated Graphics
bus-ID: 00:02.0 chip-ID: 8086:1616
Card-2: NVIDIA GM107M [GeForce 940M]
bus-ID: 04:00.0 chip-ID: 10de:139c
Display Server: X.Org 1.18.3 drivers: intel (unloaded: fbdev,vesa) FAILED: nouveau
Resolution: 1920x1080@60.05hz
GLX Renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2)
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card-1 Intel Wildcat Point-LP High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:9ca0
Card-2 Intel Broadwell-U Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:160c
Sound: Advanced Linux Sound Architecture v: k4.4.0-21-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: 4000
bus-ID: 02:00.0 chip-ID: 10ec:8168
IF: enp2s0 state: down mac: 1c:b7:2c:e7:46:66
Card-2: Qualcomm Atheros AR9462 Wireless Network Adapter
driver: ath9k bus-ID: 03:00.0 chip-ID: 168c:0034
IF: wlp3s0 state: up mac: 28:c2:dd:f8:f7:41
Drives: HDD Total Size: 1000.2GB (16.6% used)
ID-1: /dev/sda model: HGST_HTS541010A7 size: 1000.2GB serial: S00001SSGX7LXF temp: 34C
Partition: ID-1: / size: 909G used: 148G (18%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 8.49GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Sensors: System Temperatures: cpu: 44.0C mobo: N/A
Fan Speeds (in rpm): cpu: 3800
Info: Processes: 196 Uptime: 42 min Memory: 909.6/7886.5MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.421 running in gnome-terminal-) inxi: 2.2.35

Quote:

[ 14.964155] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 14.964157] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 14.964182] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 14.966128] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 15.129359] cgroup: new mount options do not match the existing superblock, will be ignored
[ 15.874260] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 15.957550] nouveau 0000:04:00.0: priv: HUB0: 6013d4 badf573f (1e408200)
[ 15.957616] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)
[ 15.988048] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 17.907256] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.907259] Bluetooth: BNEP filters: protocol multicast
[ 17.907264] Bluetooth: BNEP socket layer initialized
[ 20.987391] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 20.987707] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 20.987711] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 20.987875] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 20.987877] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 20.987903] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 20.989814] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 21.217190] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 21.229913] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 21.269200] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 21.333554] r8169 0000:02:00.0 enp2s0: link down
[ 21.333620] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 27.209008] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 27.326618] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 27.330324] vboxdrv: Found 4 processor cores
[ 27.347238] vboxdrv: TSC mode is Invariant, tentative frequency 2394436342 Hz
[ 27.347238] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[ 27.350764] VBoxNetFlt: Successfully started.
[ 27.353683] VBoxNetAdp: Successfully started.
[ 27.356566] VBoxPciLinuxInit
[ 27.358385] vboxpci: IOMMU not found (not registered)
[ 28.165855] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 28.249185] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
[ 28.280111] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 30.674921] wlp3s0: authenticate with bc:f2:af:9a:8f:8d
[ 30.685261] wlp3s0: send auth to bc:f2:af:9a:8f:8d (try 1/3)
[ 30.691183] wlp3s0: authenticated
[ 30.694930] wlp3s0: associate with bc:f2:af:9a:8f:8d (try 1/3)
[ 30.699782] wlp3s0: RX AssocResp from bc:f2:af:9a:8f:8d (capab=0x31 status=0 aid=3)
[ 30.699852] wlp3s0: associated
[ 30.699860] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 33.802801] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 33.803097] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 33.803101] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 33.803263] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 33.803266] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 33.803291] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 33.805210] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 40.477340] Bluetooth: RFCOMM TTY layer initialized
[ 40.477346] Bluetooth: RFCOMM socket layer initialized
[ 40.477350] Bluetooth: RFCOMM ver 1.11
[ 1363.868425] perf interrupt took too long (2563 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2564.195753] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 2564.279169] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1e40822c)
[ 2564.310251] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 2570.727883] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 2570.728185] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 2570.728189] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 2570.728354] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 2570.728357] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 2570.728381] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 2570.730294] nouveau 0000:04:00.0: DRM: suspending kernel object tree...

I hope this helps!

rokytnji · 09-11-2016, 10:44 AM

Sorry. I see nothing in dmesg relating to your mouse freezing up.
It would have been listed under the usb section I would think.

Maybe try another mouse is what I would try.

Edit: I just remembered. On my atom netbooks. I bought a cheap Chinese A/C power adapter to replace my blown one. It would freeze the touchpad mouse the minute I plugged in the charger. Even if I used XP Windows. I got by this issue using a external mouse while on the charger.

jaapjaa · 09-11-2016, 11:20 AM

Quote:

Originally Posted by rokytnji

Sorry. I see nothing in dmesg relating to your mouse freezing up.
It would have been listed under the usb section I would think.

Maybe try another mouse is what I would try.

Edit: I just remembered. On my atom netbooks. I bought a cheap Chinese A/C power adapter to replace my blown one. It would freeze the touchpad mouse the minute I plugged in the charger. Even if I used XP Windows. I got by this issue using a external mouse while on the charger.

This notebook did work for 2 years on Windows, without any problems with my mousepad.

I also have the output after my mouse frozes, this a picture cuz I cant copy paste without a mouse:P
http://imgur.com/a/1On2k

rokytnji · 09-11-2016, 11:29 AM

Well. Your screenshot which I can barely make out on this small screen laptop.
Shows usb errors on sections 301 through 302 or more <Can't really tell on this small screen>

Which are missing from your dmesg post. Go ahead and try using code tags < hash mark on tool bar under advanced reply button under quick reply window>

Instead of quote tags. It makes things easier.

jaapjaa · 09-11-2016, 11:32 AM

Quote:

Originally Posted by rokytnji

Well. Your screenshot which I can barely make out on this small screen laptop.
Shows usb errors on sections 301 through 302 or more <Can't really tell on this small screen>

Which are missing from your dmesg post. Go ahead and try using code tags < hash mark on tool bar under advanced reply button under quick reply window>

Instead of quote tags. It makes things easier.

Quote:

[ 792.175783] Suspending console(s) (use no_console_suspend to debug)
[ 792.176045] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 792.281850] sd 0:0:0:0: [sda] Stopping disk
[ 792.351305] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 792.434609] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1f40822c)
[ 792.464817] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 792.464847] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 792.464848] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 792.464871] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 792.466768] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 793.205524] PM: suspend of devices complete after 1029.542 msecs
[ 793.224740] PM: late suspend of devices complete after 19.198 msecs
[ 793.225219] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
[ 793.225425] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 793.241099] PM: noirq suspend of devices complete after 16.355 msecs
[ 793.241430] ACPI: Preparing to enter system sleep state S3
[ 793.250769] ACPI : EC: EC stopped
[ 793.250769] PM: Saving platform NVS memory
[ 793.250800] Disabling non-boot CPUs ...
[ 793.250958] Broke affinity for irq 48
[ 793.251973] smpboot: CPU 1 is now offline
[ 793.261058] Broke affinity for irq 19
[ 793.261062] Broke affinity for irq 42
[ 793.261063] Broke affinity for irq 43
[ 793.261067] Broke affinity for irq 45
[ 793.261073] Broke affinity for irq 48
[ 793.262094] smpboot: CPU 2 is now offline
[ 793.272927] Broke affinity for irq 1
[ 793.272929] Broke affinity for irq 8
[ 793.272930] Broke affinity for irq 9
[ 793.272932] Broke affinity for irq 12
[ 793.272934] Broke affinity for irq 19
[ 793.272937] Broke affinity for irq 42
[ 793.272938] Broke affinity for irq 43
[ 793.272939] Broke affinity for irq 44
[ 793.272941] Broke affinity for irq 45
[ 793.272943] Broke affinity for irq 46
[ 793.272945] Broke affinity for irq 47
[ 793.272946] Broke affinity for irq 48
[ 793.272948] Broke affinity for irq 50
[ 793.273960] smpboot: CPU 3 is now offline
[ 793.294001] ACPI: Low-level resume complete
[ 793.294128] ACPI : EC: EC started
[ 793.294130] PM: Restoring platform NVS memory
[ 793.294836] Enabling non-boot CPUs ...
[ 793.315298] x86: Booting SMP configuration:
[ 793.315303] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 793.322947] cache: parent cpu1 should not be sleeping
[ 793.323562] CPU1 is up
[ 793.343563] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 793.350822] cache: parent cpu2 should not be sleeping
[ 793.351435] CPU2 is up
[ 793.375219] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 793.382348] cache: parent cpu3 should not be sleeping
[ 793.382754] CPU3 is up
[ 793.400606] ACPI: Waking up from system sleep state S3
[ 793.430908] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 793.447508] PM: noirq resume of devices complete after 17.034 msecs
[ 793.448380] PM: early resume of devices complete after 0.810 msecs
[ 793.450652] usb usb1: root hub lost power or was reset
[ 793.450660] usb usb2: root hub lost power or was reset
[ 793.450890] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
[ 793.451281] nouveau 0000:04:00.0: DRM: resuming kernel object tree...
[ 793.451782] rtc_cmos 00:04: System wakeup disabled by ACPI
[ 793.452756] ath: phy0: ASPM enabled: 0x43
[ 793.456707] sd 0:0:0:0: [sda] Starting disk
[ 793.535114] nouveau 0000:04:00.0: priv: HUB0: 10ecc0 ffffffff (1840822c)
[ 793.536826] r8169 0000:02:00.0 enp2s0: link down
[ 793.651709] nouveau 0000:04:00.0: DRM: resuming client object trees...
[ 793.782546] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 793.910678] usb 1-6: device firmware changed
[ 794.022584] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[ 794.262542] usb 1-5: reset high-speed USB device number 2 using xhci_hcd
[ 794.940339] PM: resume of devices complete after 1491.885 msecs
[ 794.940556] PM: Finishing wakeup.
[ 794.940557] Restarting tasks ...
[ 794.940616] usb 1-6: USB disconnect, device number 3
[ 794.943448] done.
[ 795.114582] usb 1-6: new full-speed USB device number 6 using xhci_hcd
[ 795.230535] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 795.233515] ata1.00: configured for UDMA/133
[ 795.244116] usb 1-6: string descriptor 0 read error: -22
[ 795.244121] usb 1-6: New USB device found, idVendor=13d3, idProduct=3474
[ 795.244123] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 795.968345] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 795.980333] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 795.981122] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 795.986976] usb 1-6: USB disconnect, device number 6
[ 795.992636] r8169 0000:02:00.0 enp2s0: link down
[ 795.992699] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 796.027123] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 796.258566] usb 1-6: new full-speed USB device number 7 using xhci_hcd
[ 796.388319] usb 1-6: string descriptor 0 read error: -22
[ 796.388324] usb 1-6: New USB device found, idVendor=13d3, idProduct=3474
[ 796.388326] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 799.504288] wlp3s0: authenticate with bc:f2:af:9a:8f:8d
[ 799.514554] wlp3s0: send auth to bc:f2:af:9a:8f:8d (try 1/3)
[ 799.525748] wlp3s0: authenticated
[ 799.526725] wlp3s0: associate with bc:f2:af:9a:8f:8d (try 1/3)
[ 799.531760] wlp3s0: RX AssocResp from bc:f2:af:9a:8f:8d (capab=0x431 status=0 aid=1)
[ 799.531862] wlp3s0: associated
[ 799.531891] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 799.942738] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 799.943047] ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
[ 799.943053] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 799.943268] nouveau 0000:04:00.0: DRM: evicting buffers...
[ 799.943271] nouveau 0000:04:00.0: DRM: waiting for kernel channels to go idle...
[ 799.943297] nouveau 0000:04:00.0: DRM: suspending client object trees...
[ 799.945219] nouveau 0000:04:00.0: DRM: suspending kernel object tree...
[ 801.638898] usb 1-4: new low-speed USB device number 8 using xhci_hcd
[ 801.772518] usb 1-4: New USB device found, idVendor=046d, idProduct=c063
[ 801.772521] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 801.772523] usb 1-4: Product: DELL USB Laser Mouse
[ 801.772525] usb 1-4: Manufacturer: DELL
[ 801.772716] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 801.777324] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C063.0002/input/input16
[ 801.831125] hid-generic 0003:046D:C063.0002: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:14.0-4/input0
[ 802.298871] atkbd serio1: keyboard reset failed on isa0060/serio1

I hope this helps