LinuxQuestions.org
Latest LQ Deal: Complete CCNA, CCNP & Red Hat Certification Training Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 07-23-2012, 03:53 AM   #1
dwhb
Member
 
Registered: Jul 2012
Location: Down Under
Distribution: Mint 17 Qiana KDE
Posts: 60

Rep: Reputation: Disabled
Cannot install wacom cth460 driver


I have downloade the tar.bz2 file and followed instructions to unpack. Everything went ok except it won't install.
I have followed the INSTALLATION and README as best I could. "./configure", "make", "make install" didn't get anywhere.

I am at a total loss. Any help to install the driver so I can use the wacom bamboo pen & touch tablet would be most appreciated.

Code generated during unpacking & attempt at instllation:
daisy@linux-y6rn:~> cd Downloads
daisy@linux-y6rn:~/Downloads> ls
Countdown xf86-input-wacom-0.16.0.tar.gz
daisy@linux-y6rn:~/Downloads> tar -zxvf xf86-input-wacom-0.16.0.tar.gz
xf86-input-wacom-0.16.0/
xf86-input-wacom-0.16.0/README
xf86-input-wacom-0.16.0/configure.ac
xf86-input-wacom-0.16.0/aclocal.m4
xf86-input-wacom-0.16.0/Makefile.am
xf86-input-wacom-0.16.0/Makefile.in
xf86-input-wacom-0.16.0/config.h.in
xf86-input-wacom-0.16.0/xorg-wacom.pc.in
xf86-input-wacom-0.16.0/configure
xf86-input-wacom-0.16.0/AUTHORS
xf86-input-wacom-0.16.0/ChangeLog
xf86-input-wacom-0.16.0/INSTALL
xf86-input-wacom-0.16.0/config.guess
xf86-input-wacom-0.16.0/config.sub
xf86-input-wacom-0.16.0/depcomp
xf86-input-wacom-0.16.0/install-sh
xf86-input-wacom-0.16.0/ltmain.sh
xf86-input-wacom-0.16.0/missing
xf86-input-wacom-0.16.0/GPL
xf86-input-wacom-0.16.0/conf/
xf86-input-wacom-0.16.0/conf/50-wacom.conf
xf86-input-wacom-0.16.0/conf/wacom.fdi
xf86-input-wacom-0.16.0/conf/Makefile.am
xf86-input-wacom-0.16.0/conf/Makefile.in
xf86-input-wacom-0.16.0/doc/
xf86-input-wacom-0.16.0/doc/doxygen.conf.in
xf86-input-wacom-0.16.0/doc/footer.html
xf86-input-wacom-0.16.0/doc/Makefile.am
xf86-input-wacom-0.16.0/doc/Makefile.in
xf86-input-wacom-0.16.0/src/
xf86-input-wacom-0.16.0/src/Makefile.am
xf86-input-wacom-0.16.0/src/Makefile.in
xf86-input-wacom-0.16.0/src/common.mk
xf86-input-wacom-0.16.0/src/xf86Wacom.c
xf86-input-wacom-0.16.0/src/xf86Wacom.h
xf86-input-wacom-0.16.0/src/wcmCommon.c
xf86-input-wacom-0.16.0/src/wcmConfig.c
xf86-input-wacom-0.16.0/src/wcmISDV4.c
xf86-input-wacom-0.16.0/src/wcmFilter.c
xf86-input-wacom-0.16.0/src/wcmFilter.h
xf86-input-wacom-0.16.0/src/xf86WacomDefs.h
xf86-input-wacom-0.16.0/src/wcmUSB.c
xf86-input-wacom-0.16.0/src/wcmXCommand.c
xf86-input-wacom-0.16.0/src/wcmValidateDevice.c
xf86-input-wacom-0.16.0/src/wcmTouchFilter.c
xf86-input-wacom-0.16.0/src/wcmTouchFilter.h
xf86-input-wacom-0.16.0/man/
xf86-input-wacom-0.16.0/man/Makefile.am
xf86-input-wacom-0.16.0/man/Makefile.in
xf86-input-wacom-0.16.0/man/wacom.man
xf86-input-wacom-0.16.0/man/xsetwacom.man
xf86-input-wacom-0.16.0/include/
xf86-input-wacom-0.16.0/include/Xwacom.h
xf86-input-wacom-0.16.0/include/wacom-properties.h
xf86-input-wacom-0.16.0/include/isdv4.h
xf86-input-wacom-0.16.0/include/wacom-util.h
xf86-input-wacom-0.16.0/include/Makefile.am
xf86-input-wacom-0.16.0/include/Makefile.in
xf86-input-wacom-0.16.0/tools/
xf86-input-wacom-0.16.0/tools/Makefile.am
xf86-input-wacom-0.16.0/tools/Makefile.in
xf86-input-wacom-0.16.0/tools/isdv4-serial-debugger.c
xf86-input-wacom-0.16.0/tools/xsetwacom.c
xf86-input-wacom-0.16.0/test/
xf86-input-wacom-0.16.0/test/Makefile.am
xf86-input-wacom-0.16.0/test/Makefile.in
xf86-input-wacom-0.16.0/test/wacom-tests.c
xf86-input-wacom-0.16.0/test/fake-symbols.c
xf86-input-wacom-0.16.0/test/fake-symbols.h
daisy@linux-y6rn:~/Downloads> ls

daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ls
aclocal.m4 config.guess configure.ac include Makefile.am README xorg-wacom.pc.in
AUTHORS config.h.in depcomp INSTALL Makefile.in src
ChangeLog config.sub doc install-sh man test
conf configure GPL ltmain.sh missing tools
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/home/daisy/Downloads/xf86-input-wacom-0.16.0':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> make
make: *** No targets specified and no makefile found. Stop.
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ls
aclocal.m4 config.guess configure GPL ltmain.sh missing tools
AUTHORS config.h.in configure.ac include Makefile.am README xorg-wacom.pc.in
ChangeLog config.log depcomp INSTALL Makefile.in src
conf config.sub doc install-sh man test
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> more INSTALL
Installation Instructions
*************************

Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008 Free Software Foundation, Inc.

This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.

Basic Installation
==================

Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.

The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').

It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.

If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.

The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.

The simplest way to compile this package is:

1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.

Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.

2. Type `make' to compile the package.

3. Optionally, type `make check' to run any self-tests that come with
the package.

4. Type `make install' to install the programs and any data files and
documentation.

5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.

6. Often, you can also type `make uninstall' to remove the installed
files again.

Compilers and Options
=====================

Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.

You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:

./configure CC=c99 CFLAGS=-g LIBS=-lposix

*Note Defining Variables::, for more details.

Compiling For Multiple Architectures
====================================

You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.

With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.

On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:

./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"

This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.

Installation Names
==================

By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.

You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.

In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.

If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.

Particular systems
==================

On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:

./configure CC="cc -Ae"

and if that doesn't work, install pre-built binaries of GCC for HP-UX.

On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try

./configure CC="cc"

and if that doesn't work, try

./configure CC="cc -nodtk"

Specifying the System Type
==========================

There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:

CPU-COMPANY-SYSTEM

where SYSTEM can have one of these forms:

OS KERNEL-OS

See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.

If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.

If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.

Sharing Defaults
================

If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Defining Variables
==================

Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:

./configure CC=/usr/local2/bin/gcc

causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).

Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:

CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash

`configure' Invocation
======================

`configure' recognizes the following options to control how it
operates.

`--help'
`-h'
Print a summary of all of the options to `configure', and exit.

`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.

`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.

`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.

`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.

`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).

`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.

`--prefix=DIR'
Use DIR as the installation prefix. *Note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.

`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.

`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

================

Following is the config.log
daisy@linux-y6rn:~> cd Downloads
daisy@linux-y6rn:~/Downloads> ls
Countdown FileZilla_3.5.3_x86_64-linux-gnu.tar.bz2 xf86-input-wacom-0.16.0.tar.gz
Countdown.tar.gz hplip-3.12.6.run
daisy@linux-y6rn:~/Downloads> tar -zxvf xf86-input-wacom-0.16.0.tar.gz
xf86-input-wacom-0.16.0/
xf86-input-wacom-0.16.0/README
xf86-input-wacom-0.16.0/configure.ac
xf86-input-wacom-0.16.0/aclocal.m4
xf86-input-wacom-0.16.0/Makefile.am
xf86-input-wacom-0.16.0/Makefile.in
xf86-input-wacom-0.16.0/config.h.in
xf86-input-wacom-0.16.0/xorg-wacom.pc.in
xf86-input-wacom-0.16.0/configure
xf86-input-wacom-0.16.0/AUTHORS
xf86-input-wacom-0.16.0/ChangeLog
xf86-input-wacom-0.16.0/INSTALL
xf86-input-wacom-0.16.0/config.guess
xf86-input-wacom-0.16.0/config.sub
xf86-input-wacom-0.16.0/depcomp
xf86-input-wacom-0.16.0/install-sh
xf86-input-wacom-0.16.0/ltmain.sh
xf86-input-wacom-0.16.0/missing
xf86-input-wacom-0.16.0/GPL
xf86-input-wacom-0.16.0/conf/
xf86-input-wacom-0.16.0/conf/50-wacom.conf
xf86-input-wacom-0.16.0/conf/wacom.fdi
xf86-input-wacom-0.16.0/conf/Makefile.am
xf86-input-wacom-0.16.0/conf/Makefile.in
xf86-input-wacom-0.16.0/doc/
xf86-input-wacom-0.16.0/doc/doxygen.conf.in
xf86-input-wacom-0.16.0/doc/footer.html
xf86-input-wacom-0.16.0/doc/Makefile.am
xf86-input-wacom-0.16.0/doc/Makefile.in
xf86-input-wacom-0.16.0/src/
xf86-input-wacom-0.16.0/src/Makefile.am
xf86-input-wacom-0.16.0/src/Makefile.in
xf86-input-wacom-0.16.0/src/common.mk
xf86-input-wacom-0.16.0/src/xf86Wacom.c
xf86-input-wacom-0.16.0/src/xf86Wacom.h
xf86-input-wacom-0.16.0/src/wcmCommon.c
xf86-input-wacom-0.16.0/src/wcmConfig.c
xf86-input-wacom-0.16.0/src/wcmISDV4.c
xf86-input-wacom-0.16.0/src/wcmFilter.c
xf86-input-wacom-0.16.0/src/wcmFilter.h
xf86-input-wacom-0.16.0/src/xf86WacomDefs.h
xf86-input-wacom-0.16.0/src/wcmUSB.c
xf86-input-wacom-0.16.0/src/wcmXCommand.c
xf86-input-wacom-0.16.0/src/wcmValidateDevice.c
xf86-input-wacom-0.16.0/src/wcmTouchFilter.c
xf86-input-wacom-0.16.0/src/wcmTouchFilter.h
xf86-input-wacom-0.16.0/man/
xf86-input-wacom-0.16.0/man/Makefile.am
xf86-input-wacom-0.16.0/man/Makefile.in
xf86-input-wacom-0.16.0/man/wacom.man
xf86-input-wacom-0.16.0/man/xsetwacom.man
xf86-input-wacom-0.16.0/include/
xf86-input-wacom-0.16.0/include/Xwacom.h
xf86-input-wacom-0.16.0/include/wacom-properties.h
xf86-input-wacom-0.16.0/include/isdv4.h
xf86-input-wacom-0.16.0/include/wacom-util.h
xf86-input-wacom-0.16.0/include/Makefile.am
xf86-input-wacom-0.16.0/include/Makefile.in
xf86-input-wacom-0.16.0/tools/
xf86-input-wacom-0.16.0/tools/Makefile.am
xf86-input-wacom-0.16.0/tools/Makefile.in
xf86-input-wacom-0.16.0/tools/isdv4-serial-debugger.c
xf86-input-wacom-0.16.0/tools/xsetwacom.c
xf86-input-wacom-0.16.0/test/
xf86-input-wacom-0.16.0/test/Makefile.am
xf86-input-wacom-0.16.0/test/Makefile.in
xf86-input-wacom-0.16.0/test/wacom-tests.c
xf86-input-wacom-0.16.0/test/fake-symbols.c
xf86-input-wacom-0.16.0/test/fake-symbols.h
daisy@linux-y6rn:~/Downloads> ls
Countdown FileZilla_3.5.3_x86_64-linux-gnu.tar.bz2 xf86-input-wacom-0.16.0
Countdown.tar.gz hplip-3.12.6.run xf86-input-wacom-0.16.0.tar.gz
daisy@linux-y6rn:~/Downloads> cd xf86-input-wacom-0.16.0
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ls
aclocal.m4 config.guess configure.ac include Makefile.am README xorg-wacom.pc.in
AUTHORS config.h.in depcomp INSTALL Makefile.in src
ChangeLog config.sub doc install-sh man test
conf configure GPL ltmain.sh missing tools
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/home/daisy/Downloads/xf86-input-wacom-0.16.0':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> make
make: *** No targets specified and no makefile found. Stop.
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ls
aclocal.m4 config.guess configure GPL ltmain.sh missing tools
AUTHORS config.h.in configure.ac include Makefile.am README xorg-wacom.pc.in
ChangeLog config.log depcomp INSTALL Makefile.in src
conf config.sub doc install-sh man test

CONFIG.LOG
$ ./configure

## --------- ##
## Platform. ##
## --------- ##

hostname = linux-y6rn
uname -m = x86_64
uname -r = 2.6.37.6-0.20-desktop
uname -s = Linux
uname -v = #1 SMP PREEMPT 2011-12-19 23:39:38 +0100

/usr/bin/uname -p = unknown
/bin/uname -X = unknown

/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown

PATH: /home/daisy/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/bin/X11
PATH: /usr/X11R6/bin
PATH: /usr/games
PATH: /usr/lib64/jvm/jre/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2456: checking for a BSD-compatible install
configure:2524: result: /usr/bin/install -c
configure:2535: checking whether build environment is sane
configure:2590: result: yes
configure:2741: checking for a thread-safe mkdir -p
configure:2780: result: /bin/mkdir -p
configure:2787: checking for gawk
configure:2803: found /usr/bin/gawk
configure:2814: result: gawk
configure:2825: checking whether make sets $(MAKE)
configure:2847: result: yes
configure:2928: checking whether to enable maintainer-specific portions of Makefiles
configure:2937: result: no
configure:2962: checking for style of include used by make
configure:2990: result: GNU
configure:3061: checking for gcc
configure:3091: result: no
configure:3154: checking for cc
configure:3201: result: no
configure:3257: checking for cl.exe
configure:3287: result: no
configure:3311: error: in `/home/daisy/Downloads/xf86-input-wacom-0.16.0':
configure:3313: error: no acceptable C compiler found in $PATH
See `config.log' for more details

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=
ac_cv_env_PKG_CONFIG_PATH_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_UDEV_CFLAGS_set=
ac_cv_env_UDEV_CFLAGS_value=
ac_cv_env_UDEV_LIBS_set=
ac_cv_env_UDEV_LIBS_value=
ac_cv_env_X11_CFLAGS_set=
ac_cv_env_X11_CFLAGS_value=
ac_cv_env_X11_LIBS_set=
ac_cv_env_X11_LIBS_value=
ac_cv_env_XORG_CFLAGS_set=
ac_cv_env_XORG_CFLAGS_value=
ac_cv_env_XORG_LIBS_set=
ac_cv_env_XORG_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_make_make_set=yes

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /home/daisy/Downloads/xf86-input-wacom-0.16.0/missing --run aclocal-1.12'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH=''
AM_DEFAULT_V=''
AM_DEFAULT_VERBOSITY=''
AM_V=''
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /home/daisy/Downloads/xf86-input-wacom-0.16.0/missing --run autoconf'
AUTOHEADER='${SHELL} /home/daisy/Downloads/xf86-input-wacom-0.16.0/missing --run autoheader'
AUTOMAKE='${SHELL} /home/daisy/Downloads/xf86-input-wacom-0.16.0/missing --run automake-1.12'
AWK='gawk'
BASE_CFLAGS=''
CC=''
CCDEPMODE=''
CFLAGS=''
CHANGELOG_CMD=''
CPP=''
CPPFLAGS=''
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DRIVER_NAME=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAS_XORG_CONF_DIR_FALSE=''
HAS_XORG_CONF_DIR_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /home/daisy/Downloads/xf86-input-wacom-0.16.0/missing --run makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='xf86-input-wacom'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
PACKAGE_NAME='xf86-input-wacom'
PACKAGE_STRING='xf86-input-wacom 0.16.0'
PACKAGE_TARNAME='xf86-input-wacom'
PACKAGE_URL=''
PACKAGE_VERSION='0.16.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH=''
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
UDEV_CFLAGS=''
UDEV_LIBS=''
UNITTESTS_FALSE=''
UNITTESTS_TRUE=''
VERSION='0.16.0'
X11_CFLAGS=''
X11_LIBS=''
XORG_CFLAGS=''
XORG_LIBS=''
XORG_MAN_PAGE=''
ac_ct_AR=''
ac_ct_CC=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
configdir=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
inputdir=''
install_sh='${SHELL} /home/daisy/Downloads/xf86-input-wacom-0.16.0/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sdkdir=''
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME "xf86-input-wacom"
#define PACKAGE_TARNAME "xf86-input-wacom"
#define PACKAGE_VERSION "0.16.0"
#define PACKAGE_STRING "xf86-input-wacom 0.16.0"
#define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
#define PACKAGE_URL ""
#define PACKAGE "xf86-input-wacom"
#define VERSION "0.16.0"

configure: exit 1

Thanks very much in advance.
 
Old 07-23-2012, 04:11 AM   #2
dwhb
Member
 
Registered: Jul 2012
Location: Down Under
Distribution: Mint 17 Qiana KDE
Posts: 60

Original Poster
Rep: Reputation: Disabled
Thanks, Tinkster. I have read thru the previous postings regarding install from tarball. However, I keep getting config errors. Hence my post out of desperation. Please accept my apologies if my question should not have been posted. Thanks in advance anyway for any help I can get.

============
daisy@linux-y6rn:~/Downloads/xf86-input-wacom-0.16.0> ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/home/daisy/Downloads/xf86-input-wacom-0.16.0':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details
================
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
wacom driver installation nonis Slackware 5 05-23-2008 02:41 AM
Can't install Wacom tablet driver pan Linux - Hardware 1 03-26-2007 06:52 AM
Help! - C compiler path error with Wacom driver install pan Linux - Software 5 03-08-2007 12:35 PM
Graphire 4 not using wacom driver on Suse 10.0 with kernel 2.6.14.21 dr_zayus69 Linux - Hardware 1 07-01-2006 02:13 AM
Wacom Driver in LE2005 (10.2) Broken hcgrant Mandriva 0 05-23-2005 04:42 PM


All times are GMT -5. The time now is 02:35 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration