LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 11-06-2006, 09:40 PM   #1
edisupeno
LQ Newbie
 
Registered: Oct 2006
Posts: 5

Rep: Reputation: 0
cannot connect my pci modem


When I plug my pci modem (lucent modem), and lunch wvdial I hear dial tones, but then got no carrier message. Any body can help me.

mb NFORCE 3 754
uP AMD 64
os UBUNTU 6.06 i386, UBUNTU 6.06 64, Debian Sarge 3.2

The following output from wvdialconf


# wvdialconf

Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttyLTM0 first, /dev/modem is a link to it.
ttyLTM0<*1>: ATQ0 V1 E1 -- OK
ttyLTM0<*1>: ATQ0 V1 E1 Z -- OK
ttyLTM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyLTM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyLTM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyLTM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyLTM0<*1>: Modem Identifier: ATI -- LT V.92 Data+Fax Modem Version 8.31
ttyLTM0<*1>: Speed 4800: AT -- OK
ttyLTM0<*1>: Speed 9600: AT -- OK
ttyLTM0<*1>: Speed 19200: AT -- OK
ttyLTM0<*1>: Speed 38400: AT -- OK
ttyLTM0<*1>: Speed 57600: AT -- OK
ttyLTM0<*1>: Speed 115200: AT -- OK
ttyLTM0<*1>: Max speed is 115200; that should be safe.
ttyLTM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3 S4 S5 S6 S7 S8 S9
Modem Port Scan<*1>: S10 S11 S12 S13 S14 S15 S16 S17
Modem Port Scan<*1>: S18 S19 S20 S21 S22 S23 S24 S25
Modem Port Scan<*1>: S26 S27 S28 S29 S30 S31 S32 S33
Modem Port Scan<*1>: S34 S35 S36 S37 S38 S39 S40 S41
Modem Port Scan<*1>: S42 S43 S44 S45 S46 S47

Found a modem on /dev/ttyLTM0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttyLTM0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

and script from /etc/wvdial.conf

[Dialer Defaults]
Check Carrier = no
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Init1 = ATZ
Phone = 080989999
Modem = /dev/modem
Username = telkom
Password = telkomnet@instan
Baud = 115200

output from wvdial command:

# wvdial

--> WvDial: Internet dialer version 1.55
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT080989999
--> Waiting for carrier.
ATDT080989999
--> Timed out while dialing. Trying again.
--> Sending: ATDT080989999
--> Waiting for carrier.
NO CARRIER
ATDT080989999
--> No Carrier! Trying again.
--> Sending: ATDT080989999
--> Waiting for carrier.
NO CARRIER
ATDT080989999
--> No Carrier! Trying again.
Caught signal 2: Attempting to exit gracefully...
--> Disconnecting at Wed Nov 8 23:02:42 2006

and last get some information from /var/log/messages

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3 S4
ttyACM0<Info>: No such device or address
Modem Port Scan<*1>: ACM0
ttyACM1<Info>: No such device or address
Modem Port Scan<*1>: ACM1
ttyACM2<Info>: No such device or address
Modem Port Scan<*1>: ACM2
ttyACM3<Info>: No such device or address
Modem Port Scan<*1>: ACM3
ttyACM4<Info>: No such device or address
Modem Port Scan<*1>: ACM4
ttyACM5<Info>: No such device or address
Modem Port Scan<*1>: ACM5
ttyACM6<Info>: No such device or address
Modem Port Scan<*1>: ACM6
ttyACM7<Info>: No such device or address
Modem Port Scan<*1>: ACM7
ttyACM8<Info>: No such device or address
Modem Port Scan<*1>: ACM8
ttyACM9<Info>: No such device or address
Modem Port Scan<*1>: ACM9
ttyACM10<Info>: No such device or address
Modem Port Scan<*1>: ACM10
ttyACM11<Info>: No such device or address
Modem Port Scan<*1>: ACM11
ttyACM12<Info>: No such device or address
Modem Port Scan<*1>: ACM12
ttyACM13<Info>: No such device or address
Modem Port Scan<*1>: ACM13
ttyACM14<Info>: No such device or address
Modem Port Scan<*1>: ACM14
ttyACM15<Info>: No such device or address
Modem Port Scan<*1>: ACM15 USB0 USB1 USB2 USB3 USB4
Modem Port Scan<*1>: USB5 USB6 USB7 USB8 USB9 USB10 USB11 USB12
Modem Port Scan<*1>: USB13 USB14 USB15


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.

Last edited by edisupeno; 11-09-2006 at 01:30 AM.
 
Old 11-07-2006, 05:26 AM   #2
blackhole54
Senior Member
 
Registered: Mar 2006
Posts: 1,896

Rep: Reputation: 61
Are you sure you're dialing the right number?

Is this a "winmodem?"

What is the model number on the modem?

What initialization string(s) are you using?

Is there any additional info in the system logs? (Probably /var/log/messages)
 
Old 11-07-2006, 02:59 PM   #3
GCR
Member
 
Registered: Sep 2004
Location: Puerto Rico
Distribution: Slackware, gentoo, Ubuntu
Posts: 30

Rep: Reputation: 15
Can you give whats the output when you call wvdial?

Also post your /etc/wvdial.conf
 
Old 11-09-2006, 03:05 AM   #4
edisupeno
LQ Newbie
 
Registered: Oct 2006
Posts: 5

Original Poster
Rep: Reputation: 0
cannot connect my pci modem

I am really sure dialing with the right number. These number usually used on my window XP and working successful. I think winmodem, with agere/ lucent modem chipset. For additional information see my first edited thread.

Terima Kasih (Thank's)
 
Old 11-10-2006, 12:19 AM   #5
blackhole54
Senior Member
 
Registered: Mar 2006
Posts: 1,896

Rep: Reputation: 61
Quote:
Check Carrier = no
I don't know if the above line is just a typo when you posted or if it is really in wvdial.conf that way. The man page says it should be:

Carrier Check

instead. You might try changing it and see if it makes a difference. (Yes, I know that file was autogenerated by wvdialconf.)

You also might look at this linmodem page about identifying your chipset. I tried googling on the info you've posted and didn't find anything except possibly something in French (you don't read French do you? ) that wouldn't display anything when I clicked "translate this page."
 
Old 11-12-2006, 08:35 PM   #6
edisupeno
LQ Newbie
 
Registered: Oct 2006
Posts: 5

Original Poster
Rep: Reputation: 0
Changing to "Carrier Check" does not make any differences, no carrier message still there.

Thx's
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
difficulties in modem instalation Agere systems PCI soft modem mcstanoye SUSE / openSUSE 2 02-01-2007 10:48 AM
modem(Agere PCI soft modem) problem sajeev Linux - Hardware 1 04-17-2006 07:26 AM
Aironet 350 (PCI) and FC3, can't connect? henry_huckem Linux - Wireless Networking 10 01-25-2006 01:17 AM
wireless help! PCI WMP54GS cant connect Blue Vision Linux - Wireless Networking 1 01-19-2006 04:32 AM
found my pci modem in /cat /proc/pci... now what? bxb32001 Linux - Newbie 2 06-23-2001 11:43 PM


All times are GMT -5. The time now is 08:37 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration