LinuxQuestions.org
Visit the LQ Articles and Editorials section
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 11-20-2007, 08:08 AM   #1
Pernod Jim
LQ Newbie
 
Registered: Jan 2006
Posts: 3

Rep: Reputation: 0
Cannot burn DVDs


Hello all,

I am having some trouble burning DVDs on Gutsy Gibbon AMD64 (Ubuntu 7.10). I had a copy of Ubuntu Ultimate, which is based on Edgy, installed before and I was able to burn DVDs no problem. My processor is an AMD athlon 64 and the DVD drive that I am attempting to use is a Pioneer DVD-RW 108. I have tried 4 different methods of burning an .iso
  1. growisofs command
  2. K3b
  3. Nero for Linux 3
  4. Brasero
The error messages that I got are shown below:
growisofs:
Code:
treacle@ubuntu:~/Dido 2007$ growisofs -dvd-compat -Z /dev/dvd=rld-di07.iso
Executing 'builtin_dd if=rld-di07.iso of=/dev/dvd obs=32k seek=0'
:-[ PERFORM OPC failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
/dev/dvd: "Current Write Speed" is 12.3x1352KBps.
          0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
:-? the LUN appears to be stuck writing LBA=0h, keep retrying in 47ms
          0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
          0/2993258496 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU   0.0%
the LUN continued to be stuck until I close the terminal down

K3b
Code:
System
-----------------------
K3b Version: 1.0.3

KDE Version: 3.5.8
QT Version:  3.3.7
Kernel:      2.6.22-14-generic
Devices
-----------------------
PIONEER DVD-RW  DVR-108 1.06 (/dev/hdd, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite]

PLEXTOR CD-R   PX-W1210A 1.05 (/dev/hdc, ) [CD-R, CD-RW, CD-ROM] [Error] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]
Burned media
-----------------------
DVD-R Sequential

Used versions
-----------------------
growisofs: 7.0.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdd obs=32k seek=0'
:-[ PERFORM OPC failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
/dev/hdd: "Current Write Speed" is 12.3x1352KBps.
    1605632/2993258496 ( 0.1%) @0.0x, remaining 155:16 RBU 100.0% UBU   2.0%
    1605632/2993258496 ( 0.1%) @0.0x, remaining 248:25 RBU 100.0% UBU 100.0%
:-? the LUN appears to be stuck writing LBA=310h, keep retrying in 47ms
    1605632/2993258496 ( 0.1%) @0.0x, remaining 341:35 RBU 100.0% UBU 100.0%
    1605632/2993258496 ( 0.1%) @0.0x, remaining 465:48 RBU 100.0% UBU 100.0%
    1605632/2993258496 ( 0.1%) @0.0x, remaining 558:58 RBU 100.0% UBU 100.0%
:-? the LUN appears to be stuck writing LBA=310h, keep retrying in 47ms
    1605632/2993258496 ( 0.1%) @0.0x, remaining 652:07 RBU 100.0% UBU 100.0%
    1605632/2993258496 ( 0.1%) @0.0x, remaining 776:20 RBU 100.0% UBU 100.0%
:-[ WRITE@LBA=310h failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
:-( write failed: Input/output error
/dev/hdd: flushing cache
/dev/hdd: updating RMA
/dev/hdd: closing disc

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/hdd=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1461552 -dvd-compat -speed=12 -use-the-force-luke=bufsize:32m
I also noticed that when I started k3b form terminal I got this unhealthy looking message:
Code:
treacle@ubuntu:~$ k3b
treacle@ubuntu:~$ kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_PIONEER_DVD_RW_DVR_108 to device /dev/hdd
Mapping udi /org/freedesktop/Hal/devices/storage_model_PLEXTOR_CD_R_PX_W1210A to device /dev/hdc
/dev/hdd resolved to /dev/hdd
/dev/hdd is block device (64)
/dev/hdd seems to be cdrom
(K3bDevice::Device) /dev/hdd: init()
(K3bDevice::Device) /dev/hdd feature: CD Mastering
(K3bDevice::Device) /dev/hdd feature: CD Track At Once
(K3bDevice::Device) /dev/hdd feature: DVD+R
(K3bDevice::Device) /dev/hdd feature: DVD+RW
(K3bDevice::Device) /dev/hdd feature: DVD+R Double Layer
(K3bDevice::Device) /dev/hdd feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/hdd feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/hdd: dataLen: 60
(K3bDevice::Device) /dev/hdd: checking for TAO
(K3bDevice::Device) /dev/hdd: checking for SAO
(K3bDevice::Device) /dev/hdd: checking for SAO_R96P
(K3bDevice::Device) /dev/hdd: checking for SAO_R96R
(K3bDevice::Device) /dev/hdd: checking for RAW_R16
(K3bDevice::Device) /dev/hdd: checking for RAW_R96P
(K3bDevice::Device) /dev/hdd: checking for RAW_R96R
(K3bDevice::Device) /dev/hdd: GET PERFORMANCE dataLen = 136
(K3bDevice::Device) /dev/hdd: GET PERFORMANCE successful with reported length: 132
(K3bDevice::Device) /dev/hdd:  Number of supported write speeds via GET PERFORMANCE: 8
(K3bDevice::Device) /dev/hdd : 22160 KB/s
(K3bDevice::Device) /dev/hdd : 16620 KB/s
(K3bDevice::Device) /dev/hdd : 11080 KB/s
(K3bDevice::Device) /dev/hdd : 8310 KB/s
(K3bDevice::Device) /dev/hdd : 5540 KB/s
(K3bDevice::Device) /dev/hdd : 3324 KB/s
(K3bDevice::Device) /dev/hdd : 2770 KB/s
(K3bDevice::Device) /dev/hdd : 1385 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/hdd to 22160
/dev/hdc resolved to /dev/hdc
/dev/hdc is block device (0)
/dev/hdc seems to be cdrom
(K3bDevice::Device) /dev/hdc: init()
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::ScsiCommand) failed: 
                           command:    GET CONFIGURATION (46)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::Device) /dev/hdc: dataLen: 60
(K3bDevice::Device) /dev/hdc: checking for TAO
(K3bDevice::Device) /dev/hdc: checking for SAO
(K3bDevice::Device) /dev/hdc: checking for SAO_R96P
(K3bDevice::Device) /dev/hdc: checking for SAO_R96R
(K3bDevice::Device) /dev/hdc: checking for RAW_R16
(K3bDevice::Device) /dev/hdc: checking for RAW_R96P
(K3bDevice::Device) /dev/hdc: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed: 
                           command:    GET PERFORMANCE (ac)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        20
                           ascq:       0
(K3bDevice::Device) /dev/hdc: GET PERFORMANCE length det failed.
(K3bDevice::DeviceManager) setting current write speed of device /dev/hdc to 0
/dev/hdd resolved to /dev/hdd
(K3bDevice::DeviceManager) dev /dev/hdd already found
/dev/hdc resolved to /dev/hdc
(K3bDevice::DeviceManager) dev /dev/hdc already found
(K3bDevice::DeviceManager) found config entry for devicetype: PIONEER DVD-RW  DVR-108
(K3bDevice::DeviceManager) found config entry for devicetype: PLEXTOR CD-R   PX-W1210A
Devices:
------------------------------
Blockdevice:    /dev/hdd
Generic device: 
Vendor:         PIONEER
Description:    DVD-RW  DVR-108
Version:        1.06
Write speed:    16620
Profiles:       DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:      DVD-R, DVD-R Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/hdd
------------------------------
Blockdevice:    /dev/hdc
Generic device: 
Vendor:         PLEXTOR
Description:    CD-R   PX-W1210A
Version:        1.05
Write speed:    0
Profiles:       Error
Read Cap:       CD-ROM, CD-R, CD-RW
Write Cap:      CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R
Reader aliases: /dev/hdc
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
QGDict::hashKeyString: Invalid null key
QGDict::hashKeyString: Invalid null key
k3b: ERROR: : couldn't create slave : Unable to create io-slave:
klauncher said: Unknown protocol ''.
k3b: 
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 00:00:00 (LBA 0) (0 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 00:00:00 (LBA 0) (0 Bytes)
DiskInfo:
Mediatype:       DVD-R Sequential
Current Profile: DVD-R Sequential
Disk state:      empty
Empty:           1
Rewritable:      0
Appendable:      0
Sessions:        0
Tracks:          0
Layers:          1
Capacity:        510:46:46 (LBA 2298496) (4707319808 Bytes)
Remaining size:  510:46:46 (LBA 2298496) (4707319808 Bytes)
Used Size:       00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::Device) /dev/hdd: GET PERFORMANCE dataLen = 72
(K3bDevice::Device) /dev/hdd: GET PERFORMANCE successful with reported length: 68
(K3bDevice::Device) /dev/hdd:  Number of supported write speeds via GET PERFORMANCE: 4
(K3bDevice::Device) /dev/hdd : 16620 KB/s
(K3bDevice::Device) /dev/hdd : 11080 KB/s
(K3bDevice::Device) /dev/hdd : 8310 KB/s
(K3bDevice::Device) /dev/hdd : 5540 KB/s
(K3bDevice::Device) /dev/hdd: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/hdd: GET CONFIGURATION length det failed.
adding udi   /org/freedesktop/Hal/devices/volume_empty_dvd_r
(K3bDevice::Device) /dev/hdd: GET PERFORMANCE dataLen = 72
(K3bDevice::Device) /dev/hdd: GET PERFORMANCE successful with reported length: 68
(K3bDevice::Device) /dev/hdd:  Number of supported write speeds via GET PERFORMANCE: 4
(K3bDevice::Device) /dev/hdd : 16620 KB/s
(K3bDevice::Device) /dev/hdd : 11080 KB/s
(K3bDevice::Device) /dev/hdd : 8310 KB/s
(K3bDevice::Device) /dev/hdd : 5540 KB/s
(K3bDevice::HalConnection) lock queued for /org/freedesktop/Hal/devices/storage_model_PIONEER_DVD_RW_DVR_108
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_PIONEER_DVD_RW_DVR_108
removing udi /org/freedesktop/Hal/devices/volume_empty_dvd_r
Nero for Linux 3
Code:
2CA0-7324-1800-2000-4077-1CEE-****

Linux 2.6.22-14-generic
Nero API version: 7.5.14.9
Using interface version: 7.5.1.2
Installed in: /usr/lib64/nero/
Application: Nero AG\Nero Linux
Internal Version: 7, 5, 14, 9

Recorder:             <PIONEER DVD-RW  DVR-108> Version: 1.06 - HA 0 TA 1 - 0.0.0.0
 Adapter driver:      <ide-cdrom>               HA 0
 Drive buffer  :      2000kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
Excluded drive IDs: 
WriteBufferSize: 73400320 (0) Byte
BUFE           : 0
Physical memory     : 500MB (512328kB)
Free physical memory: 73MB (75504kB)
Memory in use       : 85 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.11.2007
NeroAPI
12:52:04	#1 Phase 114 File ExtendedProgress.cpp, Line 537
	DVD-Video files reallocation completed (no file modified)
	
12:52:05	#2 Phase 111 File ExtendedProgress.cpp, Line 537
	DVD-Video files sorted
	
12:52:05	#3 ISO9660GEN -11 File Geniso.cpp, Line 3341
	First writeable address = 0 (0x00000000)
	
12:52:06	#4 ISO9660GEN -11 File Geniso.cpp, Line 3341
	First writeable address = 0 (0x00000000)
	
12:52:06	#5 Text 0 File Burncd.cpp, Line 3490
	Turn on Disc-At-Once, using DVD media
	
12:52:07	#6 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1190239 (264:29.64, 2324MB)
	
12:52:07	#7 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO
	
12:52:07	#8 Text 0 File DlgWaitCD.cpp, Line 2952
	Recorder: PIONEER DVD-RW  DVR-108, Media type: DVD-R
	 Disc Manufacturer: RITEKG - 05
	 Disc Application Code: 64, Disc Physical Code: 193
	
12:52:07	#9 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
12:52:07	#10 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1190240 (1190240) = #1190240/264:29.65
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1190240 blocks [PIONEER DVD-RW  DVR-108 (H:0 T:1)]
	--------------------------------------------------------------
	
12:52:07	#11 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [PIONEER DVD-RW  DVR-108 (H:0 T:1)] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    2437611520, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  1190240 |        0 | 0x00
	  1190240 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
12:52:07	#12 Text 0 File Burncd.cpp, Line 4263
	Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
	
12:52:07	#13 Phase 24 File ExtendedProgress.cpp, Line 537
	Caching of files started
	
12:52:07	#14 Text 0 File Burncd.cpp, Line 4382
	Cache writing successful.
	
12:52:07	#15 Phase 25 File ExtendedProgress.cpp, Line 537
	Caching of files completed
	
12:52:07	#16 Phase 28 File ExtendedProgress.cpp, Line 537
	Speed measurement started
	
12:52:07	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
12:52:07	#18 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 590400
	
12:53:47	#19 Text 0 File WriterStatus.cpp, Line 113
	<PIONEER DVD-RW  DVR-108 (H:0 T:1)> start writing Lead-Out at LBA 1190240 (122960h), length 0 blocks
	
12:53:47	#20 Phase 29 File ExtendedProgress.cpp, Line 470
	Speed measurement completed: 17.3x (23996 KB/s)
	
12:53:47	#21 Phase 36 File ExtendedProgress.cpp, Line 537
	Burn process started at 4x (5540 KB/s)
	
12:53:47	#22 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
12:53:47	#23 Text 0 File DVDR.cpp, Line 3159
	Recording mode: Sequential Recording Mode
	
12:53:47	#24 Text 0 File DVDR.cpp, Line 3315
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
12:53:47	#25 Text 0 File Cdrdrv.cpp, Line 9915
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Revision number of maximum recording speed: 3.0
	  Revision number of minimum recording speed: 0.0
	  Revision number table of recording speed: 0.1 0.2 0.3 - - - 0.4 
	  Class: 0
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	    00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00    .0..............
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
12:53:47	#26 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 73340800
	
12:53:48	#27 Text 0 File Cdrdrv.cpp, Line 1348
	12:53:48 - PIONEER DVD-RW  DVR-108 (H:0 T:1) : Queue again later
	
12:54:01	#28 SCSI -1061 File SCSIInterface.cpp, Line 622
	SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0x2aaab30e4640
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x44
	Sense Qual: 0xD9
	CDB Data:   0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 
	            0x00 0x00 0x00 0x00 0x44 0xD9 
	
12:54:01	#29 CDR -1061 File Writer.cpp, Line 299
	Internal target failure
	PIONEER DVD-RW  DVR-108 (H:0 T:1)
	
12:54:01	#30 Text 0 File DVDR.cpp, Line 3717
	EndDAO: Last written address was 767 (2FFh)
	
12:54:01	#31 Phase 38 File ExtendedProgress.cpp, Line 537
	Burn process failed at 4x (5540 KB/s)
Brasero
Code:
imager (BraseroLocalImage) set_output
job (BraseroLocalImage) set_task
imager (BraseroLocalImage) get_track
job (BraseroLocalImage) set_task
Session starting:
	flags			= 8535 
	media type	= 0
	speed		= 0
	track type		= 8
	track format	= 2
	output		= none
job (BraseroGrowisofs) set_rate
recorder (BraseroGrowisofs) set_drive
recorder (BraseroGrowisofs) set_flags
job (BraseroGrowisofs) set_source
job (BraseroGrowisofs) set_task
recorder (BraseroGrowisofs) record
process (BraseroGrowisofs) getting varg
growisofs (BraseroGrowisofs) set_action
process (BraseroGrowisofs) got varg:
	growisofs
	-use-the-force-luke=notray
	-use-the-force-luke=dao
	-dvd-compat
	-use-the-force-luke=tty
	-Z
	/dev/hdd=/home/jim/Fifa 2007/rld-fi07.iso
process (BraseroGrowisofs) launching command
process (BraseroGrowisofs) stdout: Executing 'builtin_dd if=/home/jim/Fifa 2007/rld-fi07.iso of=/dev/hdd obs=32k seek=0'
process (BraseroGrowisofs) stderr: /dev/hdd: engaging DVD-R DAO upon user request...
process (BraseroGrowisofs) stderr: :-[ PERFORM OPC failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
process (BraseroGrowisofs) stderr: /dev/hdd: reserving 1461552 blocks
process (BraseroGrowisofs) stderr: /dev/hdd: "Current Write Speed" is 4.1x1352KBps.
process (BraseroGrowisofs) stdout:     1605632/2993258496 ( 0.1%) @0.0x, remaining 155:16 RBU 100.0% UBU   2.0%
growisofs (BraseroGrowisofs) set_written
growisofs (BraseroGrowisofs) set_total
growisofs (BraseroGrowisofs) set_rate
growisofs (BraseroGrowisofs) set_action
growisofs (BraseroGrowisofs) start_progress
process (BraseroGrowisofs) stdout:     1605632/2993258496 ( 0.1%) @0.0x, remaining 248:25 RBU 100.0% UBU 100.0%
growisofs (BraseroGrowisofs) set_written
growisofs (BraseroGrowisofs) set_total
growisofs (BraseroGrowisofs) set_rate
growisofs (BraseroGrowisofs) set_action
growisofs (BraseroGrowisofs) start_progress
process (BraseroGrowisofs) stderr: :-[ WRITE@LBA=310h failed with SK=4h/ASC=44h/ACQ=D9h]: Input/output error
process (BraseroGrowisofs) stderr: :-( write failed: Input/output error
job (BraseroGrowisofs) asked to stop
	status	= 1
	error		= 1
	message	= "Unhandled error, aborting"
iter (BraseroGrowisofs) stopping
process (BraseroGrowisofs) got killed
iter (BraseroGrowisofs) stopped
job (BraseroGrowisofs) got out of loop
job (BraseroGrowisofs) set_task
Session error : Unhandled error, aborting
Following a link I found to pcburn.com I have found that the SK=4h/ASC=44h/ACQ=D9h error message means "4 44 00 INTERNAL TARGET FAILURE" (if my hex translation is right!) this unfortunately leaves me none the wiser.

My present theory is that this:
(K3bDevice::ScsiCommand) failed
means that I should be running the drive as a Scsi emulated one, which is something I had to do when I was running Breezy Badger.

Another theory is that the "dvd+rw-tools" which appears to contain the growisofs package in Gutsy has one which is incompatible with my set up, so I was thinking of down grading it to the version that comes with Edgy, does anyone know what this is called and where I can get it? And if it is wise to do such a thing?!

Any help appreciated,

Jim
 
Old 11-21-2007, 03:11 PM   #2
Mara
Moderator
 
Registered: Feb 2002
Location: Grenoble
Distribution: Debian
Posts: 9,535

Rep: Reputation: 148Reputation: 148
Moved: This thread is more suitable in Linux-Newbie and has been moved accordingly to help your thread/question get the exposure it deserves.

You have two drives. The second one (CD-R) gives some kind of error, but it is probably not very important.

Also, it seems that you used different kind of media for different runs (DVD/CD). Is it correct? Have you tried burning a simple plain CD-R?

Also, please check where /dev/dvd points to.
 
Old 11-22-2007, 08:26 AM   #3
Pernod Jim
LQ Newbie
 
Registered: Jan 2006
Posts: 3

Original Poster
Rep: Reputation: 0
Smile Thanks

I managed to burn my DVD in the end you will be pleased to hear. First I cleaned the lens then I used a better quality of media (Maxwell are much better than Tesco value - surprise, surprise)
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot burn DVDs Pernod Jim LinuxQuestions.org Member Intro 0 11-20-2007 08:11 AM
Can't Burn DVDs with K3b anwar Slackware 15 04-28-2007 11:59 AM
k3b won't burn CD-R's but does burn DVDs. Livino Linux - Newbie 6 03-18-2006 05:51 PM
Burn Multiple dvds at once aeruzcar Linux - Software 1 11-21-2005 01:32 AM
burn dvds eduac Linux - Software 6 06-23-2005 07:00 PM


All times are GMT -5. The time now is 02:55 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration