LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 12-18-2012, 06:42 PM   #1
paulstenlund
LQ Newbie
 
Registered: Dec 2012
Posts: 24

Rep: Reputation: Disabled
can't see win pc from unbuntu -pc can see ubuntu


Hi guys - first post - long time browser

Recently got wireless router set up (long story there) for wifes xmas kindle fire. The pc can read/write to the unbuntu pc but ubuntu can't see the winpc. I get "failed to retrieve share list ...". I can browse the internet and ping router and winpc. When I try to change ip settings the "apply" button is not active - grayed out. help

Thanks
Paul
 
Old 12-18-2012, 09:20 PM   #2
Peacedog
LQ Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,296

Rep: Reputation: 168Reputation: 168
Hi paulstenlund, Welcome to LQ or posting at least. ;-)

Which version of Ubuntu and Windows are trying to share to and from?

On the Ubuntu machine what does the /etc/samba/smb.conf file look like? Have you created samba users? Are you trying to access the Windows shares with an actual Windows username and password?

Good luck. ;-)
 
Old 12-19-2012, 02:02 AM   #3
paulstenlund
LQ Newbie
 
Registered: Dec 2012
Posts: 24

Original Poster
Rep: Reputation: Disabled
no more gray

Peacedog

Thanks for the reply

Win7 ubuntu 10.4

I'll send the smb.cfg tommorow morn

The machines have been talking over wireless for 2 yrs - so I think Samba is fine -- but

The new wireless route changed the Gateway IP add. I changed the gateway ip 192.168.1.1) add to match and the ip add to one in the subnet (192.168.1.107) on the unbuntu sys and it still won't talk.

Think I'll try changing them back to the old ip's 10.0.01, 2, and 3

Paul
 
Old 12-19-2012, 08:58 PM   #4
Peacedog
LQ Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,296

Rep: Reputation: 168Reputation: 168
You're welcome.

When you say "the machines have been talking over wireless for 2 yrs", do mean the "failed to retrieve share list" error is new? At some point you were sharing files with no errors? Were any of the IP Addresses hard coded into the smb.conf?

Good luck. ;-)
 
Old 12-19-2012, 10:25 PM   #5
paulstenlund
LQ Newbie
 
Registered: Dec 2012
Posts: 24

Original Poster
Rep: Reputation: Disabled
oops

I meant to say "wired" they been talking over wired net for two years, the problem started with the wireless router

Paul
 
Old 12-20-2012, 09:45 PM   #6
Peacedog
LQ Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,296

Rep: Reputation: 168Reputation: 168
Have you tried just using DHCP from the router and letting it handle the IP addresses? Post the smb.conf when possible please.

Good luck. ;-)
 
Old 12-21-2012, 06:26 PM   #7
paulstenlund
LQ Newbie
 
Registered: Dec 2012
Posts: 24

Original Poster
Rep: Reputation: Disabled
samba config

Here's the smb.conf

tried to attach it but I couldn't get it to work --

Hope this helps. The router has a wan address of 10.0.0.5. Should this be in the 192.168 subnet? The WAN seems to work both systems can surf - win can read/write Ubuntu

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
usershare owner only = false

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
[homes]
comment = Home Directories
browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
read only = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom


Hope this helps
Thanks

Paul
 
Old 12-22-2012, 04:04 PM   #8
Peacedog
LQ Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,296

Rep: Reputation: 168Reputation: 168
Try adding the following to your Global section and restarting smbd and nmbd.

Code:
name resolve order = lmhosts wins bcast host
What happens if you allow the router to assign IP's with it's DHCP setting? What does the following return?

Code:
$ smbclient -L xxx.xxx.xxx.xxx
Where xxx.xxx.xxx.xxx is the IP of the machine you're trying to connect to.

Good luck. ;-)
 
Old 12-22-2012, 08:06 PM   #9
frankbell
LQ Guru
 
Registered: Jan 2006
Location: Virginia, USA
Distribution: Slackware, Debian, Mageia, and whatever VMs I happen to be playing with
Posts: 12,270
Blog Entries: 16

Rep: Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127Reputation: 3127
Since it's a new router, have you verified that the TCP/IP ports are open in the router?

Quote:
UDP/137 - used by nmbd
UDP/138 - used by nmbd
TCP/139 - used by smbd
TCP/445 - used by smbd
You can see the more here: http://lists.samba.org/archive/samba...ry/036471.html
 
Old 12-24-2012, 06:36 PM   #10
paulstenlund
LQ Newbie
 
Registered: Dec 2012
Posts: 24

Original Poster
Rep: Reputation: Disabled
Fixed

I put the wins pc's new ip add in the hosts file instead of the old one (3-5 yrs old) forgot about that

Thanks for your help Peacedog

Have a Wonderful Christmas
Paul
 
Old 12-24-2012, 06:52 PM   #11
Peacedog
LQ Guru
 
Registered: Sep 2003
Location: Danville, VA
Distribution: Slackware, Windows, FreeBSD, OpenBSD, Mac OS X
Posts: 5,296

Rep: Reputation: 168Reputation: 168
Glad you got it sorted mate. You're welcome. Merry Christmas!

Good luck. ;-)
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
ubuntu 12.4 on win 7 mr.cracker Linux - Newbie 6 07-20-2012 10:39 AM
[SOLVED] Win 7 over Ubuntu dann_radkov Linux - Newbie 4 10-05-2011 04:47 PM
Win 7 and Ubuntu oskarpetersen LinuxQuestions.org Member Intro 1 06-30-2009 10:09 AM
Dual Boot Unbuntu and Windows XP (Unbuntu Installed First). Mad4Macintosh Linux - Newbie 16 03-20-2009 10:37 AM
WOL lin->win fails, win->win works? c0uchm0nster Linux - Networking 1 01-07-2007 11:33 PM


All times are GMT -5. The time now is 08:21 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration