LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 09-17-2008, 03:27 AM   #1
parijat.chauhan
LQ Newbie
 
Registered: May 2008
Posts: 7

Rep: Reputation: 0
Question bluetooth-dialup gprs problem with samsung sgh-p310 mobile phone


hello everybody.............
m a linux newbie from india.though i enjoyed internet thro mobile gprs
with different mobile-phones.but now i changed to samsung sgh-p310 model.
but i m surprizes that this phone is not working so easily.here is the
messages printed over terminal when i tried connecting via bluetooth.
i m using kubuntu 8.04.
WOULD PLZ tell me the problem and a solution .....
PLZ i dont wanna to go back to microsux windoze........just bcoz of this problem.



AT
OK
ATE1
OK
AT+cgdcont=1,"IP","internet"
OK
ATD*99***1#
CONNECT
Serial connection established.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xcf7e97e7> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <auth pap>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <auth pap>]
rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xcf7e97e7>]
rcvd [LCP ConfNak id=0x2 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0xcf7e97e7>]
LCP: timeout sending Config-Requests
Terminating on signal 2
Connection terminated.
 
Old 09-18-2008, 09:28 AM   #2
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 15,077

Rep: Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713
Quote:
Originally Posted by parijat.chauhan View Post
hello everybody.............
m a linux newbie from india.though i enjoyed internet thro mobile gprs
with different mobile-phones.but now i changed to samsung sgh-p310 model.
but i m surprizes that this phone is not working so easily.here is the
messages printed over terminal when i tried connecting via bluetooth.
i m using kubuntu 8.04.
WOULD PLZ tell me the problem and a solution .....
LCP: timeout sending Config-Requests
Terminating on signal 2
Connection terminated.
You can start by not typing in huge fonts and shouting. Have you actually googled for the error message?

http://linmodems.technion.ac.il/arch.../msg03895.html

There is lots of info on this error, and things you can do to correct it.
 
Old 09-19-2008, 12:38 PM   #3
parijat.chauhan
LQ Newbie
 
Registered: May 2008
Posts: 7

Original Poster
Rep: Reputation: 0
Unhappy

i have googled a lot.actually i have used a lot of methods
n suggestions from various websites like orelly linux dev center,
google groups,various LUGs,here LinuxQuestion n lot more.
but find no solution to problem.
but what i get to know this problem is very modem specific.
because when i connected dialup through my friends nokia phone.
it worked.but my samsung doesn't seem to work with Linux.
Here in INDIA ISP's are not providing support to Linux user.
so i m feeling very lonely and disturbed.dont know when problem
will be solved if at all.

antway thnx for repling n sorry for the mistake i made ,in future i will take care of using fonts when posting questions....................

Last edited by parijat.chauhan; 09-19-2008 at 12:41 PM.
 
Old 09-19-2008, 01:10 PM   #4
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 15,077

Rep: Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713
Quote:
Originally Posted by parijat.chauhan View Post
i have googled a lot.actually i have used a lot of methods
n suggestions from various websites like orelly linux dev center,
google groups,various LUGs,here LinuxQuestion n lot more.
but find no solution to problem.
but what i get to know this problem is very modem specific.
because when i connected dialup through my friends nokia phone.
it worked.but my samsung doesn't seem to work with Linux.
Here in INDIA ISP's are not providing support to Linux user.
so i m feeling very lonely and disturbed.dont know when problem
will be solved if at all.

antway thnx for repling n sorry for the mistake i made ,in future i will take care of using fonts when posting questions....................
You could always just get a nokia phone...or you could get a Samsung that has a modem in it. Your's doesn't, according to the Samsung website.
 
Old 09-19-2008, 02:35 PM   #5
parijat.chauhan
LQ Newbie
 
Registered: May 2008
Posts: 7

Original Poster
Rep: Reputation: 0
Unhappy

dont know how u said this,that samsung sgh-p310 doesn't hav modem.
i can connect to internet using this mobile in windows .
wvdial also detects it successfully.and lastly u can see various
AT commands and their response in my post.
HERE IS MY MODEM.using modem query diagnosis in windows
=================================================================
ATQ0V1E0 - OK
AT+GMM - SGH-P310
AT+FCLASS=? - 0,8
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI:0
AT+GCI=? - +GCI:00-C4
ATI1 - 815
ATI2 - 1234
ATI3 - AC3F
ATI4 - Mar 6 2007
ATI5 - OK
ATI6 - 0
ATI7 - Serial speed: auto
---------------------S registers-------------------
S00: 0 S02: 43 S03: 13 S04: 10
S05: 8 S06: 2 S07: 60 S08: 2
S10: 1 S12: 50 S23: 0 S37: 2
--------------------- Responses -------------------
Echo: off Quiet: off Verbose: on XValue: 3
------------------ Modem Control ------------------
Handshaking: hw
DTRcontrol: disconnect DCDcontrol: passage
Modem class: 0 Overspeed: on
------------------ Bearer Service -----------------
???asynchronous non-transparent
=====================================================================

AND THIS IS LOG FILE CREATED WHEN I CONNECTED TO INTERNET
=====================================================================
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
09-19-2008 22:15:48.765 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
09-19-2008 22:15:48.765 - Modem type: SAMSUNG Mobile USB Modem
09-19-2008 22:15:48.765 - Modem inf path: oem11.inf
09-19-2008 22:15:48.765 - Modem inf section: Samsung.Install
09-19-2008 22:15:48.765 - Matching hardware ID: usb\vid_04e8&pid_663f&class_02&subclass_02&prot_01&os_nt
09-19-2008 22:15:48.796 - 115200,8,N,1, ctsfl=1, rtsctl=2
09-19-2008 22:15:48.812 - Initializing modem.
09-19-2008 22:15:48.828 - Send: AT<cr>
09-19-2008 22:15:48.890 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:48.890 - Interpreted response: OK
09-19-2008 22:15:48.890 - Send: AT V1E0S0=0&D2&C1<cr>
09-19-2008 22:15:48.984 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:48.984 - Interpreted response: OK
09-19-2008 22:15:49.000 - Send: AT +CMEE=1<cr>
09-19-2008 22:15:49.093 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.093 - Interpreted response: OK
09-19-2008 22:15:49.109 - Send: AT+IFC=2,2;<cr>
09-19-2008 22:15:49.187 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.187 - Interpreted response: OK
09-19-2008 22:15:49.187 - Sending user initialization commands.
09-19-2008 22:15:49.203 - Send: AT+CGDCONT=1,"IP","internet"<cr>
09-19-2008 22:15:49.281 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.281 - Interpreted response: OK
09-19-2008 22:15:49.281 - Waiting for a call.
09-19-2008 22:15:49.296 - Send: ATS0=0<cr>
09-19-2008 22:15:49.406 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.406 - Interpreted response: OK
09-19-2008 22:15:49.406 - 115200,8,N,1, ctsfl=0, rtsctl=1
09-19-2008 22:15:49.406 - Initializing modem.
09-19-2008 22:15:49.421 - Send: AT<cr>
09-19-2008 22:15:49.500 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.500 - Interpreted response: OK
09-19-2008 22:15:49.500 - Send: AT V1E0S0=0&D2&C1<cr>
09-19-2008 22:15:49.593 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.593 - Interpreted response: OK
09-19-2008 22:15:49.609 - Send: AT +CMEE=1<cr>
09-19-2008 22:15:49.703 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.703 - Interpreted response: OK
09-19-2008 22:15:49.718 - Send: AT+IFC=0,0;<cr>
09-19-2008 22:15:49.796 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.796 - Interpreted response: OK
09-19-2008 22:15:49.796 - Sending user initialization commands.
09-19-2008 22:15:49.812 - Send: AT+CGDCONT=1,"IP","internet"<cr>
09-19-2008 22:15:49.890 - Recv: <cr><lf>OK<cr><lf>
09-19-2008 22:15:49.890 - Interpreted response: OK
09-19-2008 22:15:49.890 - Dialing.
09-19-2008 22:15:49.906 - Send: ATD*###<cr>
09-19-2008 22:15:51.328 - Recv: <cr><lf>CONNECT<cr><lf>
09-19-2008 22:15:51.328 - Interpreted response: Connect
09-19-2008 22:15:51.328 - Connection established at 115200bps.
09-19-2008 22:15:51.328 - Error-control off or unknown.
09-19-2008 22:15:51.328 - Data compression off or unknown.
09-19-2008 22:16:21.328 - Read: Total: 42902, Per/Sec: 1428, Written: Total: 10025, Per/Sec: 331
 
Old 09-19-2008, 03:04 PM   #6
TB0ne
Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 15,077

Rep: Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713Reputation: 2713
Quote:
Originally Posted by parijat.chauhan View Post
dont know how u said this,that samsung sgh-p310 doesn't hav modem.
i can connect to internet using this mobile in windows .
wvdial also detects it successfully.and lastly u can see various
AT commands and their response in my post.
HERE IS MY MODEM.using modem query diagnosis in windows
You don't know how I said that? Did you read what I wrote? I went to the Samsung website, and it said it didn't have one. Since I don't, I have to go by that.

And did you read the page that I sent you in my original post? The one that had your exact error-message in it? Did you do what it told you?
 
Old 09-25-2008, 03:25 AM   #7
parijat.chauhan
LQ Newbie
 
Registered: May 2008
Posts: 7

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by TB0ne View Post
You don't know how I said that? Did you read what I wrote? I went to the Samsung website, and it said it didn't have one. Since I don't, I have to go by that.

And did you read the page that I sent you in my original post? The one that had your exact error-message in it? Did you do what it told you?
i followed the steps according to the post suggested above also.
but same problem again......
i think this must be problem with most of samsung mobiles.
i connected thro usb cable also hoping wvdial may do some trick but
useless.one thing that i found strange is how windows can connect
successfully while linux can't . i also tried to give the same AT
commands as default windows did ,but phone went a reboot.
Dont know what is wrong and where

Last edited by parijat.chauhan; 09-25-2008 at 03:29 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How can you use a Samsung SGH X630 mobile as a bluetooth EDGE modem? toufiq_km Linux - Hardware 7 09-25-2008 07:32 AM
I can't configure my 'Samsung SGH-A701' mobile phone as a modem in fedora 6 ferarri_saon Linux - Hardware 0 08-28-2008 07:56 AM
Samsung SGH-D840 won't Bluetooth pair to server? Simmo512 Linux - Software 1 06-27-2008 03:49 PM
Samsung E900 mobile phone, GPRS modem & Slackware 10.1 norkers Linux - Hardware 5 02-25-2008 07:12 AM
net access via GPRS enbled mobile phone corbis_demon Linux - Networking 0 01-25-2005 03:12 AM


All times are GMT -5. The time now is 08:25 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration