Ok heres the results.txt
thank you guys for trying to help by the way
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks at sector
426319371 of the same hard drive for the stage2 file. A stage2 file is at
this location on /dev/sda. Stage2 looks on partition #7 for
/boot/grub/menu.lst.
sda1: _________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst
sda2: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: _________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System: [H[2J Arch Linux () ()
Boot files/dirs: /etc/fstab
sda4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: _________________________________________________________________________
File system: ext2
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: BackTrack 4 PwnSauce
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda8: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb: _________________________________________________________________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /boot/grub/menu.lst
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xf99b3d64
Partition Boot Start End Size Id System
/dev/sda1 * 1 208,844 208,844 83 Linux
/dev/sda2 208,845 738,989 530,145 82 Linux swap / Solaris
/dev/sda3 738,990 16,113,194 15,374,205 83 Linux
/dev/sda4 16,113,195 488,392,064 472,278,870 5 Extended
/dev/sda5 16,113,258 22,394,609 6,281,352 82 Linux swap / Solaris
/dev/sda6 22,394,673 381,640,139 359,245,467 83 Linux
/dev/sda7 381,640,203 483,942,059 102,301,857 83 Linux
/dev/sda8 483,942,123 488,392,064 4,449,942 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 f75ee560-a605-464e-92f4-6fc86d96f8ec ext2
/dev/sda2 fab56de9-8e63-4460-878c-89d428a5044b swap
/dev/sda3 8b04794b-2e25-44bc-8eb3-af16f451ab2a ext2
/dev/sda5 f3763389-9930-4668-956a-cd0264e665e9 swap
/dev/sda6 7f2524b1-8d4c-4529-aaa7-f762b0d8ae89 ext2
/dev/sda7 166147f5-5cf4-463e-bcec-2f28bf769fb3 ext3
/dev/sda8 c2807b35-8739-4b35-b653-e9b3022d5431 swap
/dev/sdb 70BA-2AAE vfat
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
rootfs / rootfs (rw)
/dev/sdb /media/cdrom0 vfat (ro,noatime,fmask=0022,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)
/dev/loop0 /rofs squashfs (ro,noatime)
============================= sda1/grub/menu.lst: =============================
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
#
http://wiki.archlinux.org/index.php/...fer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/8b04794b-2e25-44bc-8eb3-af16f451ab2a ro
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/8b04794b-2e25-44bc-8eb3-af16f451ab2a ro
initrd /kernel26-fallback.img
=================== sda1: Location of files loaded by Grub: ===================
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: vmlinuz26
=============================== sda3/etc/fstab: ===============================
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 /boot ext2 defaults 0 1
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext2 defaults 0 1
/dev/sda4 /home ext2 defaults 0 1
=========================== sda7/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=166147f5-5cf4-463e-bcec-2f28bf769fb3 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=166147f5-5cf4-463e-bcec-2f28bf769fb3
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=0x317 resume=/dev/hda5
# defoptions=vga=0x317
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
splashimage=166147f5-5cf4-463e-bcec-2f28bf769fb3/boot/grub/splash.xpm.gz
title Ubuntu 8.10, kernel 2.6.30.9
uuid 166147f5-5cf4-463e-bcec-2f28bf769fb3
kernel /boot/vmlinuz-2.6.30.9 root=UUID=166147f5-5cf4-463e-bcec-2f28bf769fb3 ro quiet splash
initrd /boot/initrd.img-2.6.30.9
quiet
title Ubuntu 8.10, kernel 2.6.30.9 (recovery mode)
uuid 166147f5-5cf4-463e-bcec-2f28bf769fb3
kernel /boot/vmlinuz-2.6.30.9 root=UUID=166147f5-5cf4-463e-bcec-2f28bf769fb3 ro single
initrd /boot/initrd.img-2.6.30.9
title Ubuntu 8.10, memtest86+
uuid 166147f5-5cf4-463e-bcec-2f28bf769fb3
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda3.
title Arch Linux (on /dev/sda3)
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/8b04794b-2e25-44bc-8eb3-af16f451ab2a ro
initrd /kernel26.img
savedefault
boot
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda3.
title Arch Linux Fallback (on /dev/sda3)
root (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/8b04794b-2e25-44bc-8eb3-af16f451ab2a ro
initrd /kernel26-fallback.img
savedefault
boot
=============================== sda7/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda7
UUID=166147f5-5cf4-463e-bcec-2f28bf769fb3 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda8
UUID=c2807b35-8739-4b35-b653-e9b3022d5431 none swap sw 0 0
=================== sda7: Location of files loaded by Grub: ===================
218.2GB: boot/grub/menu.lst
218.2GB: boot/grub/stage2
218.2GB: boot/initrd.img-2.6.30.9
218.2GB: boot/vmlinuz-2.6.30.9
218.2GB: initrd.img
218.2GB: vmlinuz
=========================== sdb/boot/grub/menu.lst: ===========================
# By default, boot the first entry.
default 0
# Boot automatically after 30 secs.
timeout 30
splashimage=/boot/grub/bt4.xpm.gz
foreground e3e3e3
background 303030
title Start BackTrack FrameBuffer (1024x768)
kernel /boot/vmlinuz BOOT=casper boot=casper nopersistent rw quiet vga=0x317
initrd /boot/initrd.gz
title Start BackTrack FrameBuffer (800x600)
kernel /boot/vmlinuz BOOT=casper boot=casper nopersistent rw quiet vga=0x314
initrd /boot/initrd800.gz
title Start BackTrack Forensics (no swap)
kernel /boot/vmlinuz BOOT=casper boot=casper nopersistent rw vga=0x317
initrd /boot/initrdfr.gz
title Start BackTrack in Safe Graphical Mode
kernel /boot/vmlinuz BOOT=casper boot=casper xforcevesa rw quiet
initrd /boot/initrd.gz
title Start Persistent Live CD
kernel /boot/vmlinuz BOOT=casper boot=casper persistent rw quiet
initrd /boot/initrd.gz
title Start BackTrack in Text Mode
kernel /boot/vmlinuz BOOT=casper boot=casper nopersistent textonly rw quiet
initrd /boot/initrd.gz
title Start BackTrack Graphical Mode from RAM
kernel /boot/vmlinuz BOOT=casper boot=casper toram nopersistent rw quiet
initrd /boot/initrd.gz
title Memory Test
kernel /boot/memtest86+.bin
title Boot the First Hard Disk
root (hd0)
chainloader +1
==================== sdb: Location of files loaded by Grub: ====================
.0GB: boot/grub/menu.lst
.0GB: boot/initrd800.gz
.0GB: boot/initrdfr.gz
.0GB: boot/initrd.gz
.0GB: boot/vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdc