LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 06-27-2011, 02:50 PM   #1
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Rep: Reputation: Disabled
Apache 2 restart error


I am trying to set up SSL on a Linux server(11.4). I have installed the certificates and edited the relevant files (vhosts-ssl.conf) but when I restart apache I get the following error.

Can anyone help with a solution so I can test the SSL.

Starting httpd2 (prefork) (98)Address already in use: make_sock: could not bind to address [::]:443
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80

Thanks in advance
 
Old 06-27-2011, 03:07 PM   #2
T3RM1NVT0R
Senior Member
 
Registered: Dec 2010
Location: Internet
Distribution: Linux Mint, SLES, CentOS, Red Hat
Posts: 2,385

Rep: Reputation: 476Reputation: 476Reputation: 476Reputation: 476Reputation: 476
@ Reply

Hi there,

As you mentioned Linux 11.4 are you talking about Ubuntu?

If yes, then paste the output of:

cat /etc/apache2/ports.conf
cat /etc/apache2/apache2.conf
 
Old 06-27-2011, 03:56 PM   #3
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by T3RM1NVT0R View Post
Hi there,

As you mentioned Linux 11.4 are you talking about Ubuntu?

If yes, then paste the output of:

cat /etc/apache2/ports.conf
cat /etc/apache2/apache2.conf
No I am using SuSE Linux 11.4 not Ubuntu
 
Old 06-27-2011, 04:23 PM   #4
szboardstretcher
Senior Member
 
Registered: Aug 2006
Location: Detroit, MI
Distribution: GNU/Linux systemd
Posts: 3,836

Rep: Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360Reputation: 1360
Code:
netstat -an|grep 443
See if there is a process already bound to port 443.
 
Old 06-27-2011, 04:30 PM   #5
T3RM1NVT0R
Senior Member
 
Registered: Dec 2010
Location: Internet
Distribution: Linux Mint, SLES, CentOS, Red Hat
Posts: 2,385

Rep: Reputation: 476Reputation: 476Reputation: 476Reputation: 476Reputation: 476
@ Reply

Please paste httpd.conf or apache2.conf. Not sure about the config files used on SuSE 11.4. Also ports.conf

From the error it appears that somewhere in the config file you have mentioned the IP address with the port name. Something like xxx.xxx.xxx.xxx:80

And that is the reason you are getting that message.

You don't need to put the IP address server will automatically listen.

If you want to redirect it to https only then you can make the changes in httpd.conf so that whenever a user request a connection on http port it will automatically get redirected to secure port.
 
Old 06-29-2011, 01:00 AM   #6
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by szboardstretcher View Post
Code:
netstat -an|grep 443
See if there is a process already bound to port 443.

Tried this and it does not show anything.
 
Old 06-29-2011, 01:39 AM   #7
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Original Poster
Rep: Reputation: Disabled
httpd.conf

#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.

# Quickstart guide:
# http://en.opensuse.org/Apache_Quickstart_HOWTO


# Overview of include files, chronologically:
#
# httpd.conf
# |
# |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
# |-- server-tuning.conf . . . . . . . . . sizing of the server (how many processes to start, ...)
# |-- sysconfig.d/loadmodule.conf . . . . .[*] load these modules
# |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
# |-- mod_log_config.conf . . . . . . . . . define logging formats
# |-- sysconfig.d/global.conf . . . . . . .[*] server-wide general settings
# |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status (server monitoring)
# |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
# |-- mod_usertrack.conf . . . . . . . . . defaults for cookie-based user tracking
# |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of server-generated directory listings
# |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime configuration
# |-- errors.conf . . . . . . . . . . . . . customize error responses
# |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default server _and all_ virtual hosts
# |
# |-- default-server.conf . . . . . . . . . set up the default server that replies to non-virtual-host requests
# | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is loaded)
# | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
# |
# |-- sysconfig.d/include.conf . . . . . .[*] your include files
# | (for each file to be included here, put its name
# | into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
# |
# `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one file here
# `-- *.conf . . . . . . . . . . . . . (*.conf is automatically included)
#
#
# Files marked[*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2



# Filesystem layout:
#
# /etc/apache2/
# |-- charset.conv . . . . . . . . . . . . for mod_auth_ldap
# |-- conf.d/
# | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
# | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with apache2-mod_php4
# | `-- ... . . . . . . . . . . . . . . . other configuration added by packages
# |-- default-server.conf
# |-- errors.conf
# |-- httpd.conf . . . . . . . . . . . . . top level configuration file
# |-- listen.conf
# |-- magic
# |-- mime.types -> ../mime.types
# |-- mod_autoindex-defaults.conf
# |-- mod_info.conf
# |-- mod_log_config.conf
# |-- mod_mime-defaults.conf
# |-- mod_perl-startup.pl
# |-- mod_status.conf
# |-- mod_userdir.conf
# |-- mod_usertrack.conf
# |-- server-tuning.conf
# |-- ssl-global.conf
# |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Revocation Lists (CRL)
# |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
# |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Signing Requests
# |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
# |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
# |-- sysconfig.d/ . . . . . . . . . . . . files that are created from /etc/sysconfig/apache2
# | |-- global.conf
# | |-- include.conf
# | `-- loadmodule.conf
# |-- uid.conf
# `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host configuration (*.conf) here
# |-- vhost-ssl.template
# `-- vhost.template



### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
Include /etc/apache2/mod_log_config.conf

# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf

# forbid access to the entire filesystem by default
<Directory />
Options None
AllowOverride None
Order deny,allow
Deny from all
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf


# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider
# adding it in your own file (/etc/apache2/httpd.conf.local)
# putting its name into APACHE_CONF_INCLUDE_FILES in
# /etc/sysconfig/apache2 -- this will make system updates
# easier
 
Old 06-29-2011, 01:58 AM   #8
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Original Poster
Rep: Reputation: Disabled
VHosts-ssl.conf

This is the other file created. It may give some insite to the problem.. not sure

# Template for a VirtualHost with SSL
# Note: to use the template, rename it to /etc/apache2/vhost.d/yourvhost.conf.
# Files must have the .conf suffix to be loaded.
#
# See /usr/share/doc/packages/apache2/README.QUICKSTART for further hints
# about virtual hosts.

# NameVirtualHost statements should be added to /etc/apache2/listen.conf.

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.2/mod/mod_ssl.html>
#
# For the moment, see <URL:http://www.modssl.org/docs/> for this info.
# The documents are still being prepared from material donated by the
# modssl project.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#

# Until documentation is completed, please check http://www.modssl.org/
# for additional config examples and module docmentation. Directives
# and features of mod_ssl are largely unchanged from the mod_ssl project
# for Apache 1.3.

<IfDefine SSL>
<IfDefine !NOSSL>

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

# General setup for the virtual host
DocumentRoot "/srv/www-ssl/htdocs"
ServerName xxx.xxx.xxx.xxx:443
ServerAdmin alan@derbybargaincentre.co.uk
ErrorLog /var/log/apache2/error_log
TransferLog /var/log/apache2/access_log

# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on

# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile /etc/apache2/ssl.crt/server.crt
#SSLCertificateFile /etc/apache2/ssl.crt/server-dsa.crt

# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/apache2/ssl.key/server.key
#SSLCertificateKeyFile /etc/apache2/ssl.key/server-dsa.key

# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/ca.crt

# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/apache2/ssl.crt
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10

# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/srv/www/cgi-bin">
SSLOptions +StdEnvVars
</Directory>

# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0

# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /var/log/apache2/ssl_request_log ssl_combined

<Directory "/srv/www-ssl/htdocs">
AllowOverride None
Order allow,deny
Allow from all
</Directory>

</VirtualHost>

</IfDefine>
</IfDefine>
 
Old 06-29-2011, 02:02 AM   #9
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Original Poster
Rep: Reputation: Disabled
Listen.conf

This is the equiv to ports.conf


# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports. See also the <VirtualHost> directive.
#
# http://httpd.apache.org/docs-2.2/mod...on.html#listen
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
#Listen 12.34.56.78:80
#Listen 80
#Listen 443



<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>

Listen 443

</IfModule>
</IfDefine>
</IfDefine>


# Use name-based virtual hosting
#
# - on a specified address / port:
#
#NameVirtualHost 12.34.56.78:80
#
# - name-based virtual hosting:
#
NameVirtualHost *:80
NameVirtualHost *:443
#
# - on all addresses and ports. This is your best bet when you are on
# dynamically assigned IP addresses:
#
#NameVirtualHost *

Listen 443
Listen 80
 
Old 06-29-2011, 03:00 PM   #10
T3RM1NVT0R
Senior Member
 
Registered: Dec 2010
Location: Internet
Distribution: Linux Mint, SLES, CentOS, Red Hat
Posts: 2,385

Rep: Reputation: 476Reputation: 476Reputation: 476Reputation: 476Reputation: 476
@ Reply

Try the following steps:

1. Make a backup of your listen.conf file.

2. Stop apache service using: service httpd stop or service apache2 stop

3. Copy paste the following in listen.conf file:

# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports. See also the <VirtualHost> directive.
#
# http://httpd.apache.org/docs-2.2/mod...on.html#listen
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
#Listen 12.34.56.78:80
#Listen 80
#Listen 443



<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>

#Listen 443

</IfModule>
</IfDefine>
</IfDefine>


# Use name-based virtual hosting
#
# - on a specified address / port:
#
#NameVirtualHost 12.34.56.78:80
#
# - name-based virtual hosting:
#
#NameVirtualHost *:80
#NameVirtualHost *:443
#
# - on all addresses and ports. This is your best bet when you are on
# dynamically assigned IP addresses:
#
#NameVirtualHost *

Listen 443
Listen 80

4. Make sure you have IP address of your server mentioned in /etc/hosts

5. Start apache service again using: service apache2 start or service httpd start
 
Old 07-01-2011, 03:30 AM   #11
alandowley
LQ Newbie
 
Registered: Jun 2011
Posts: 7

Original Poster
Rep: Reputation: Disabled
Thanks for your help.
I have tried that and found that the following stops apache loading requiring the passphrase to be entered for it to read encrypted files.

<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>

#Listen 443

</IfModule>
</IfDefine>
</IfDefine>
 
Old 07-01-2011, 03:13 PM   #12
T3RM1NVT0R
Senior Member
 
Registered: Dec 2010
Location: Internet
Distribution: Linux Mint, SLES, CentOS, Red Hat
Posts: 2,385

Rep: Reputation: 476Reputation: 476Reputation: 476Reputation: 476Reputation: 476
@ Reply

Are you using LUKS on the file system. If yes, try entering LUKS password. I am not sure why it is asking for decryption because when the system comes up partitions are mounted after decryption.

Can you attach a screenshot of that message.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Apache 2 error on restart but doesn't effect? Should I worry? damteke Linux - Server 11 10-27-2009 05:06 AM
can't trace frequent apache crash/automagic restart error I_AM Linux - General 1 04-09-2005 09:13 AM
how do i apache restart? einstien Linux - General 3 03-30-2005 02:22 PM
Apache can't restart Serbulent Linux - Enterprise 2 03-16-2005 03:29 AM
How do I restart Apache? 360 Linux - Networking 2 08-25-2001 07:26 PM


All times are GMT -5. The time now is 06:52 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration