Adapter Card Dump
 

Our SCSI Adapter is doing this
scsi3: Dumping Card State at program address 0xfd Mode 0x11
Card was paused
INTSTAT[0x0] SELOID[0x3] SELID[0x30] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19]
SCSISIGI[0x84] SCSIPHASE[0x10] SCSIBUS[0x0] LASTPHASE[0x80]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0xab]
KERNEL_QFREEZE_COUNT[0xab] MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x9]
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac]
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0
qinstart = 14462 qinfifonext = 14463
QINFIFO: 0x2
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x48] SCB_SCSIID[0x37]
3 FIFO_USE[0x0] SCB_CONTROL[0x40] SCB_SCSIID[0x37]
Total 2
Kernel Free SCB list: 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:

Sounds like you're having a problem. But since you haven't said anything about what you're doing when the problem comes up, what version/distro of Linux, anything about your hardware (aside from this generic SCSI card message), or the environment it's in, we can't really help you.

Post complete information, and we can try to go from there, but with just a generic error message, there's not much anyone can do for you.

More Info
 

TB Thanks for checiking in - Deatil is attached

You need to post the relevant information in your post, not in attached text files.

For the rest of the community who may try to help, you're using RHEL5.2, with a tape library, and Arkeia backup software. That said, you're in a supported configuration, since you're paying for support from RedHat and Arkeia (most probably)....I'd call them, and work through the problem. If your whole server is working, and you only receive an error when you try to access the tape library, that narrows it down.

First thing I'd do, is to make sure the library has the latest firmware revisions on it. Then make sure you're using the right drivers. Once you have verified those items, I'd run hardware tests on the library itself. There are probably routines/programs that you can run, to make the drives mount/unmount, and make the changer operate, so put it through it's paces there. If you still have no problems, you've narrowed it down to Arkeia, and the way it talks to the library.