LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 12-01-2002, 12:23 AM   #1
Zander
Member
 
Registered: Jul 2002
Posts: 65

Rep: Reputation: 15
Talking 3 Questions


Hi there, just got Slackware 8.1 up and running and so far I have 3 questions:

1. I'm using some of the options set in XF86Config that "Anaconda" configured when I was running Redhat 8.0 (eeww). The screen was perfect then, but now it's too big. I have to make the mouse 'push' over to see more of the screen. Do I have to change refresh rates???

2. How can I go about configuring my sound card? Every time I log in, KDE tells me it can't open my sound device. I'm using a SoundBlaster Live!.

3. How can I make KDE start up automatically once logged in? I thought I read something about inet levels, but I'm not sure. I just don't want to bother with having to hit startx after logging in.

Thanks in advance.
 
Old 12-01-2002, 12:41 AM   #2
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
1. You will need to disable virtual screens in your XF86Config file. Its where the size of the desktop is larger than the actual screen.
Either that or just run xf86config to setup X.

2. Edit your /etc/rc.d/modules.conf file and uncomment out the emu10k module under the sound section.
Then chmod 666 /dev/dsp* /dev/mixer*

3. Edit your /etc/inittab file to start automatically in runlevel 4.

All these questions have been answered many times before and especially being Slackware specific in the Slackware forum. A simple search would have found all of these for you.
 
Old 12-01-2002, 10:27 AM   #3
Zander
Member
 
Registered: Jul 2002
Posts: 65

Original Poster
Rep: Reputation: 15
Okay thanks, I got the init to do runlevel 4, but the other two stump me. I'm still pretty new to Linux. I did use xf86config to setup X and then I replaced video card names, etc. with the ones specified by Anaconda because my video card isn't in the database. After looking through /etc/X11/XF86Config, I still don't see anything with virtual screens. Could someone clear this up?

My sound is still dead. Being a n00b, I do not know what is meant by uncommenting a line. I found a line specifying emu10k in /etc/rc.d/rc.modules (because there is no /etc/rc.d/modules.conf) and removed it from the file and I chmodded those files as well, but I still get the same error. It can't open the driver and something about /dev/dsp (I should have written the error down).
 
Old 12-01-2002, 10:36 AM   #4
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
Oops.. yeah sorry, the files is rc.modules.. I was thinking of other things..

By uncommenting, I mean when you were looking at that file, in front of that line that represents the emu10k, there is a hash mark in front of it.. ##### <----- Those thingy's.. which probably looks like this on that line:

#/sbin/modprobe emu10k

Remove that # in front of the line...

And about the editing of the XF86Config, you can't just copy over things like that. One system varies from the next and your old Redhat system could have had drivers that your Slack system doesn't have. Probably one reason your getting the larger virtual screen.

I would suggest going to www.xfree86.org and reading up on their docs for more information, also depending on what type of card you have which hasn't been mentioned might be of some help as well..
 
Old 12-01-2002, 10:47 AM   #5
Zander
Member
 
Registered: Jul 2002
Posts: 65

Original Poster
Rep: Reputation: 15
Ooo... now I feel stupid. Since I removed the lines, I can't remember what they were. Makes me wish I had backed that file up. Can you tell me what the line before it was? It should have been like #Support for....: or something like that. Sorry and thanks.
 
Old 12-01-2002, 10:53 AM   #6
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
Quote:
Originally posted by Zander
Ooo... now I feel stupid. Since I removed the lines, I can't remember what they were. Makes me wish I had backed that file up. Can you tell me what the line before it was? It should have been like #Support for....: or something like that. Sorry and thanks.
If you deleted the lines, you only need that one I mentioned before, cause the other one is only describing what module it is and it wont be read anyways since it still would have the # in front of it..
 
Old 12-01-2002, 11:05 AM   #7
Zander
Member
 
Registered: Jul 2002
Posts: 65

Original Poster
Rep: Reputation: 15
Good point, rofl.
I have one last question because something weird happened to me minutes ago. I installed Gaim and made a shortcut for it. When I clicked on it, the whole screen turned from kde to gnome and it gave me errors saying it needed support for gnome or something. The desktop remained kde, but the taskbar and everything is gnome. If I hit the hide menu button, the kde bar is underneath! What's going on? If I click on the windows in the gnome bar (called KWin I think) everything disappears. I just want kde, so how can I remove the gnome bar?
P.S. I searched and found nothing
 
Old 12-01-2002, 11:40 AM   #8
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
I forgot the name of it specifically but try seeing what processes are running and see if you see any gnome-applet or anything associated with gnome running.. and kill it.

Maybe post your output of ps -aux and I might be able to tell from there ?
 
Old 12-01-2002, 02:03 PM   #9
Zander
Member
 
Registered: Jul 2002
Posts: 65

Original Poster
Rep: Reputation: 15
I tried killing all the processes, but it didn't seem to work. Instead, I logged in as root and deleted that user, then re-added it. That fixed that.

Then I upgraded my X server from 4.2.0 to 4.2.1 and redid the configuration. Nothing worked so out of desperation I just replaced the XFree86Config file with the one I saved from my RedHat 8.0 Config file, but left out anything specific to my system like the font server since RedHat uses a different. So now my screen works

Now my last problem is still sound. I did what you said, but the error remains. Here's that portion of my modules file:

### Sound support ###
/sbin/modprobe emu10k
# Sound Blaster Pro/16 support:
#/sbin/modprobe sb io=0x220 irq=5 dma=3 dma16=5 mpu_io=0x300
# MAD16 support:
#/sbin/modprobe mad16 io=0x530 irq=7 dma=0 dma16=1
# AD1816(A) sound driver:
#/sbin/modprobe modprobe ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
# Crystal CS4232 based (PnP) cards:
#/sbin/modprobe cs4232
# ES1370 support, such as Sound Blaster 128PCI:
#/sbin/modprobe es1370
# ES1371 support, such as Sound Blaster 64V PCI:
#/sbin/modprobe es1371
# ESS Maestro, Maestro2, Maestro2E:
#/sbin/modprobe maestro
# ESS Maestro3/Allegro:
#/sbin/modprobe maestro3
# (For information on configuring other sound cards with Linux,
# see the documentation in /usr/src/linux/Documentation/sound/,
# and /usr/src/linux/Documentation/Configure.help.


I still get the same error upon starting X that says "Error while initializing sound driver. Device /dev/dsp can't be opened (no such device)."

Anymore ideas??
 
Old 12-01-2002, 02:34 PM   #10
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
Well its not detecting a /dev/dsp which is kind of needed.

What is your output of dmesg ? And also the output of ls -al /dev/dsp* ?
 
Old 12-01-2002, 03:17 PM   #11
Zander
Member
 
Registered: Jul 2002
Posts: 65

Original Poster
Rep: Reputation: 15
bash-2.05a$ ls -al /dev/dsp*
crw-rw-rw- 1 root sys 14, 3 Jul 18 1994 /dev/dsp
crw-rw-rw- 1 root sys 14, 19 Jul 18 1994 /dev/dsp1

bash-2.05a$ dmesg
Linux version 2.4.18 (root@midas) (gcc version 2.95.3 20010315 (release)) #4 Fri May 31 01:25:31 PDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 1532.941 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3060.53 BogoMIPS
Memory: 513180k/524272k available (1536k kernel code, 10704k reserved, 426k data, 228k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 1800+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1aa0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3147] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd8000000, mapped to 0xe080d000, size 65536k
vesafb: mode is 1024x768x8, linelength=1024, pages=84
vesafb: protected mode interface info at c000:549e
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 5 for device 00:0f.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (12b9,1008,12b9,00d3)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS04 at port 0xb000 (irq = 5) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@suse.cz>
hda: Maxtor 6E040L0, ATA DISK drive
hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive
hdd: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide0: probed IRQ 14 failed, using default.
ide1 at 0x170-0x177,0x376 on irq 15
ide1: probed IRQ 15 failed, using default.
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2344.000 MB/sec
32regs : 1941.600 MB/sec
pIII_sse : 2190.400 MB/sec
pII_mmx : 3587.200 MB/sec
p5_mmx : 4586.800 MB/sec
raid5: using function: pIII_sse (2190.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.1-rc4(ish)(03/10/2001)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 228k freed
Adding Swap: 530104k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18 #1 Wed May 8 13:51:37 PDT 2002
options: [pci] [cardbus]
Intel ISA/PCI/CardBus PCIC probe:
no bridges found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
spurious 8259A interrupt: IRQ7.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PPP BSD Compression module registered
PPP Deflate Compression module registered
mtrr: no MTRR for d8000000,4000000 found
 
Old 12-01-2002, 04:43 PM   #12
Ciccio
Member
 
Registered: Nov 2002
Location: Paraguay
Distribution: Mandrake 10
Posts: 573

Rep: Reputation: 30
about the init levels... edit the file /etc/inittab

ther eis a line that says something like
id:3:initdefault:

replace it with

id:5:initdefault:
 
Old 12-01-2002, 04:52 PM   #13
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
Quote:
Originally posted by Ciccio
about the init levels... edit the file /etc/inittab

ther eis a line that says something like
id:3:initdefault:

replace it with

id:5:initdefault:
Echo alert

He already got that working and in Slack its runlevel 4 that boots you into X.

About the sound now. These lines look like it might be the problem.

"PCI: Found IRQ 5 for device 00:0f.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (12b9,1008,12b9,00d3)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net."

If you can give us the out put of lspci -vv ?

Oh and your /dev/dsp 's look alright from the output of them. We'll see what the lspci output gives us...
 
Old 12-01-2002, 05:03 PM   #14
Zander
Member
 
Registered: Jul 2002
Posts: 65

Original Poster
Rep: Reputation: 15
lspci -vv gives me this:

00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Subsystem: Asustek Computer, Inc.: Unknown device 807f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: d7000000-d7efffff
Prefetchable memory behind bridge: d7f00000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22 1394a-2000 Controller (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 35 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d6800000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d6000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at b800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d5800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550])
Subsystem: US Robotics/3Com: Unknown device 00d3
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b000 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:10.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs: Unknown device 8064
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at a800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at a400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at a000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 9800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 9400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon QL (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon 8500
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at d7000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d7fe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
Old 12-01-2002, 05:16 PM   #15
trickykid
LQ Guru
 
Registered: Jan 2001
Posts: 24,149

Rep: Reputation: 235Reputation: 235Reputation: 235
That is strange. It detects the card with the lspci command but your dmesg doesn't indicate a thing about it.

On my Slack 8.1 box, I have a Soundblaster Live and this is my output in my dmesg which yours should show something similiar:

Code:
Creative EMU10K1 PCI Audio Driver, version 0.18, 00:45:28 May 31 2002
PCI: Found IRQ 5 for device 00:0b.0
emu10k1: EMU10K1 rev 7 model 0x8071 found, IO at 0xe400-0xe41f, IRQ 5
ac97_codec: AC97  codec, id: 0x5452:0x4123 (TriTech TR A5)
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
basic questions on hostname and domain name + related postfix questions Moebius Linux - Newbie 7 09-04-2007 11:50 AM
Solaris - Questions! Questions! Questions! qs_tahmeed Solaris / OpenSolaris 2 07-16-2005 05:27 AM
window manager questions and/or theme questions t3gah Linux - Software 2 02-27-2005 04:16 PM
Some questions... CryptDragoon Linux From Scratch 2 02-04-2004 08:28 PM
few questions? pudhiyavan Linux - General 2 10-03-2003 07:35 AM


All times are GMT -5. The time now is 11:03 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration