LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices


Reply
  Search this Thread
Old 04-20-2010, 05:48 AM   #1
diva17
LQ Newbie
 
Registered: Apr 2010
Posts: 5

Rep: Reputation: 0
2nd HDD is not mounted after Ubuntu installation


Hello people who are wiser than me.

I recently formatted my hard drive and installed Ubuntu and I have the following problem:

My laptop has to inbuilt hard drives, one which I use for the operating system and one which I use for storage. Up until 3 days ago, I had Windows XP and Ubuntu 8.04 installed on one of the hard drives, but decided to switch fully to Ubuntu 9 because Windows was giving me far too many issues. So I downloaded the ISO, burned it on CD and then installed. I formatted (as far as I could tell) only one drive but the other one has disappeared from view ever since. I asked a more Linux savvy friend of mine for help and he only got as far as determining that the 2nd HDD is still detected but not mounted. And then he referred me here. So I really hope someone can help out.

I'm really hoping someone can help me out - there are quite important files on this hard drive and (as you could guess) I've no backups - before you say it, I've learned my lesson on this account.

Thanks in advance!
 
Old 04-20-2010, 05:50 AM   #2
diva17
LQ Newbie
 
Registered: Apr 2010
Posts: 5

Original Poster
Rep: Reputation: 0
Here is what my friend used for his diagnosis (dmesg.log):

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 (Ubuntu 2.6.31-20.58-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] modified: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] modified: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a5000 - 37fef515
[ 0.000000] Allocated new RAMDISK: 008b2000 - 00ffc515
[ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef514 to 008b2000 - 00ffc514
[ 0.000000] ACPI: RSDP 000f76a0 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 7f6d2888 00074 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6dfc92 000F4 (v03 TOSQCI TOSQCI00 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7f6d4136 0BAE8 (v02 TOSQCI N.Jersey 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 7f6e2fc0 00040
[ 0.000000] ACPI: HPET 7f6dfd86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7f6dfdbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 7f6dfdfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f6dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 7f6dfe8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 7f6d3ae7 0064F (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d2e88 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d2de2 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7f6d28fc 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008ae000 - 00008b119c] BRK ==> [00008ae000 - 00008b119c]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008b2000 - 0000ffc515] NEW RAMDISK ==> [00008b2000 - 0000ffc515]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f7750] f7750
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521835
[ 0.000000] free_area_init_node: node 0, pgdat c0788900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517757
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=65f16933-f4fa-4ba7-b76d-9831469594c8 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10438720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
[ 0.000000] Memory: 2043628k/2087744k available (4578k kernel code, 42836k reserved, 2146k data, 540k init, 1178440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB)
[ 0.000000] .data : 0xc0578948 - 0xc0791408 (2146 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0578948 (4578 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.126 MHz processor.
[ 0.001279] Console: colour VGA+ 80x25
[ 0.001282] console [tty0] enabled
[ 0.001423] hpet clockevent registered
[ 0.001426] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001432] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.25 BogoMIPS (lpj=9576504)
[ 0.001449] Security Framework initialized
[ 0.001471] AppArmor: AppArmor initialized
[ 0.001476] Mount-cache hash table entries: 512
[ 0.001596] Initializing cgroup subsys ns
[ 0.001601] Initializing cgroup subsys cpuacct
[ 0.001604] Initializing cgroup subsys memory
[ 0.001610] Initializing cgroup subsys freezer
[ 0.001612] Initializing cgroup subsys net_cls
[ 0.001625] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001627] CPU: L2 cache: 3072K
[ 0.001629] CPU: Physical Processor ID: 0
[ 0.001630] CPU: Processor Core ID: 0
[ 0.001634] mce: CPU supports 6 MCE banks
[ 0.001640] CPU0: Thermal monitoring handled by SMI
[ 0.001643] using mwait in idle threads.
[ 0.001650] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001657] ... version: 2
[ 0.001658] ... bit width: 40
[ 0.001660] ... generic counters: 2
[ 0.001661] ... value mask: 000000ffffffffff
[ 0.001662] ... max period: 000000007fffffff
[ 0.001664] ... fixed-purpose counters: 3
[ 0.001665] ... counter mask: 0000000700000003
[ 0.001668] Checking 'hlt' instruction... OK.
[ 0.018212] ACPI: Core revision 20090521
[ 0.032404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074991] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4787.94 BogoMIPS (lpj=9575898)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring handled by SMI
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161517] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.161530] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164022] Brought up 2 CPUs
[ 0.164024] Total of 2 processors activated (9576.20 BogoMIPS).
[ 0.164074] CPU0 attaching sched-domain:
[ 0.164077] domain 0: span 0-1 level MC
[ 0.164079] groups: 0 1
[ 0.164084] CPU1 attaching sched-domain:
[ 0.164085] domain 0: span 0-1 level MC
[ 0.164087] groups: 1 0
[ 0.164155] Booting paravirtualized kernel on bare hardware
[ 0.164170] regulator: core version 0.5
[ 0.164170] Time: 8:46:30 Date: 04/20/10
[ 0.164170] NET: Registered protocol family 16
[ 0.164184] EISA bus registered
[ 0.164193] ACPI: bus type pci registered
[ 0.164252] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164254] PCI: MCFG area at e0000000 reserved in E820
[ 0.164256] PCI: Using MMCONFIG for extended config space
[ 0.164258] PCI: Using configuration type 1 for base access
[ 0.165077] bio: create slab <bio-0> at 0
[ 0.168118] ACPI: EC: Look up EC in DSDT
[ 0.171990] ACPI: BIOS _OSI(Linux) query ignored
[ 0.172022] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.688004] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.228003] ACPI: Interpreter enabled
[ 1.228003] ACPI: (supports S0 S3 S4 S5)
[ 1.228003] ACPI: Using IOAPIC for interrupt routing
[ 1.288722] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.288724] ACPI: EC: driver started in poll mode
[ 1.289012] ACPI: No dock devices found.
[ 1.289546] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.289551] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.289577] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.289659] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf00fffff]
[ 1.289666] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 1.289671] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 1.289707] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0100000-0xf01fffff]
[ 1.289818] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 1.289884] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 1.289956] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0704000-0xf07043ff]
[ 1.290019] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.290024] pci 0000:00:1a.7: PME# disabled
[ 1.290079] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
[ 1.290141] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.290146] pci 0000:00:1b.0: PME# disabled
[ 1.290233] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.290238] pci 0000:00:1c.0: PME# disabled
[ 1.290331] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.290336] pci 0000:00:1c.3: PME# disabled
[ 1.290427] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.290431] pci 0000:00:1c.4: PME# disabled
[ 1.290522] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.290527] pci 0000:00:1c.5: PME# disabled
[ 1.290592] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 1.290657] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 1.290722] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 1.290793] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0704400-0xf07047ff]
[ 1.290857] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.290862] pci 0000:00:1d.7: PME# disabled
[ 1.291034] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 1.291038] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 1.291042] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 1.291048] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0200 (mask 0013)
[ 1.291052] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 1.291105] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 1.291113] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 1.291120] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 1.291128] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 1.291136] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 1.291193] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
[ 1.291201] pci 0000:00:1f.2: reg 14 io port: [0x18f4-0x18f7]
[ 1.291209] pci 0000:00:1f.2: reg 18 io port: [0x18f8-0x18ff]
[ 1.291217] pci 0000:00:1f.2: reg 1c io port: [0x18f0-0x18f3]
[ 1.291225] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef]
[ 1.291232] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df]
[ 1.291262] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.291267] pci 0000:00:1f.2: PME# disabled
[ 1.291294] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 1.291320] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 1.291407] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 1.291412] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.291420] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.291480] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[ 1.291485] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.291493] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.291564] pci 0000:07:00.0: reg 10 64bit mmio: [0xf0200000-0xf0203fff]
 
Old 04-20-2010, 05:51 AM   #3
diva17
LQ Newbie
 
Registered: Apr 2010
Posts: 5

Original Poster
Rep: Reputation: 0
[ 1.291574] pci 0000:07:00.0: reg 18 io port: [0x2000-0x20ff]
[ 1.291610] pci 0000:07:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.291657] pci 0000:07:00.0: supports D1 D2
[ 1.291659] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.291665] pci 0000:07:00.0: PME# disabled
[ 1.291741] pci 0000:00:1c.4: bridge io port: [0x00-0xfff]
[ 1.291745] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.291753] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.291846] pci 0000:08:00.0: reg 10 64bit mmio: [0xf0300000-0xf0301fff]
[ 1.291964] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 1.291972] pci 0000:08:00.0: PME# disabled
[ 1.292065] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 1.292070] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.292078] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.292121] pci 0000:0a:01.0: reg 10 32bit mmio: [0xf0400000-0xf0400fff]
[ 1.292130] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf0402000-0xf04027ff]
[ 1.292182] pci 0000:0a:01.0: supports D1 D2
[ 1.292184] pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.292188] pci 0000:0a:01.0: PME# disabled
[ 1.292238] pci 0000:0a:01.2: reg 10 32bit mmio: [0xf0402800-0xf04028ff]
[ 1.292309] pci 0000:0a:01.2: supports D1 D2
[ 1.292311] pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.292317] pci 0000:0a:01.2: PME# disabled
[ 1.292366] pci 0000:0a:01.3: reg 10 32bit mmio: [0xf0401000-0xf0401fff]
[ 1.292437] pci 0000:0a:01.3: supports D1 D2
[ 1.292439] pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.292444] pci 0000:0a:01.3: PME# disabled
[ 1.292517] pci 0000:00:1e.0: transparent bridge
[ 1.292525] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 1.292564] pci_bus 0000:00: on NUMA node 0
[ 1.292568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.292734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.292803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.292861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.292924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.293006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.293110] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.293114] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.303322] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.303417] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.303507] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.303597] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.303690] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.303781] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 1.303870] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.303959] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.304115] SCSI subsystem initialized
[ 1.304122] libata version 3.00 loaded.
[ 1.304122] usbcore: registered new interface driver usbfs
[ 1.304122] usbcore: registered new interface driver hub
[ 1.304122] usbcore: registered new device driver usb
[ 1.304122] ACPI: WMI: Mapper loaded
[ 1.304122] PCI: Using ACPI for IRQ routing
[ 1.304122] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 1.304122] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 1.304122] pci 0000:00:1c.0: BAR 15: can't allocate resource
[ 1.304122] pci 0000:00:1c.3: BAR 13: can't allocate resource
[ 1.304122] pci 0000:00:1c.3: BAR 14: can't allocate resource
[ 1.304122] pci 0000:00:1c.3: BAR 15: can't allocate resource
[ 1.304122] pci 0000:00:1c.4: BAR 13: can't allocate resource
[ 1.304122] pci 0000:00:1c.4: BAR 14: can't allocate resource
[ 1.304122] pci 0000:00:1c.4: BAR 15: can't allocate resource
[ 1.304122] pci 0000:00:1c.5: BAR 13: can't allocate resource
[ 1.304122] pci 0000:00:1c.5: BAR 14: can't allocate resource
[ 1.304122] pci 0000:00:1c.5: BAR 15: can't allocate resource
[ 1.304142] pci 0000:07:00.0: BAR 0: no parent found for of device [0xf0200000-0xf0203fff]
[ 1.304145] pci 0000:07:00.0: BAR 0: can't allocate resource
[ 1.304147] pci 0000:07:00.0: BAR 2: no parent found for of device [0x2000-0x20ff]
[ 1.304149] pci 0000:07:00.0: BAR 2: can't allocate resource
[ 1.304155] pci 0000:08:00.0: BAR 0: no parent found for of device [0xf0300000-0xf0301fff]
[ 1.304157] pci 0000:08:00.0: BAR 0: can't allocate resource
[ 1.316008] Bluetooth: Core ver 2.15
[ 1.316013] NET: Registered protocol family 31
[ 1.316013] Bluetooth: HCI device and connection manager initialized
[ 1.316016] Bluetooth: HCI socket layer initialized
[ 1.316017] NetLabel: Initializing
[ 1.316019] NetLabel: domain hash size = 128
[ 1.316020] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.316030] NetLabel: unlabeled traffic allowed by default
[ 1.316059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.316063] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.324010] Switched to high resolution mode on CPU 0
[ 1.325555] Switched to high resolution mode on CPU 1
[ 1.333006] pnp: PnP ACPI init
[ 1.333013] ACPI: bus type pnp registered
[ 1.334550] pnp 00:05: io resource (0x2e-0x2f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334554] pnp 00:05: io resource (0x4e-0x4f) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334557] pnp 00:05: io resource (0x61-0x61) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334559] pnp 00:05: io resource (0x63-0x63) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334562] pnp 00:05: io resource (0x65-0x65) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334564] pnp 00:05: io resource (0x67-0x67) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334567] pnp 00:05: io resource (0x68-0x68) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334569] pnp 00:05: io resource (0x6c-0x6c) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334572] pnp 00:05: io resource (0x80-0x80) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334574] pnp 00:05: io resource (0x92-0x92) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.334577] pnp 00:05: io resource (0xb2-0xb3) overlaps 0000:07:00.0 BAR 2 (0x0-0xff), disabling
[ 1.404411] pnp: PnP ACPI: found 9 devices
[ 1.404413] ACPI: ACPI bus type pnp unregistered
[ 1.404416] PnPBIOS: Disabled by ACPI PNP
[ 1.404426] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.404428] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 1.404431] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.404433] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.404436] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.404438] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.404440] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.404443] system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved
[ 1.404448] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.404453] system 00:05: ioport range 0x800-0x80f has been reserved
[ 1.404456] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 1.404458] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 1.404460] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 1.439086] AppArmor: AppArmor Filesystem Enabled
[ 1.439176] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.439178] pci 0000:00:1c.0: IO window: disabled
[ 1.439184] pci 0000:00:1c.0: MEM window: disabled
[ 1.439188] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.439193] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 1.439195] pci 0000:00:1c.3: IO window: disabled
[ 1.439200] pci 0000:00:1c.3: MEM window: disabled
[ 1.439205] pci 0000:00:1c.3: PREFETCH window: disabled
[ 1.439223] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 1.439226] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 1.439233] pci 0000:00:1c.4: MEM window: 0x80000000-0x800fffff
[ 1.439238] pci 0000:00:1c.4: PREFETCH window: 0x80100000-0x801fffff
[ 1.439254] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 1.439256] pci 0000:00:1c.5: IO window: disabled
[ 1.439262] pci 0000:00:1c.5: MEM window: 0x80200000-0x802fffff
[ 1.439266] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.439271] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.439273] pci 0000:00:1e.0: IO window: disabled
[ 1.439279] pci 0000:00:1e.0: MEM window: 0xf0400000-0xf04fffff
[ 1.439283] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.439296] alloc irq_desc for 17 on node -1
[ 1.439297] alloc kstat_irqs on node -1
[ 1.439301] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.439308] pci 0000:00:1c.0: setting latency timer to 64
[ 1.439317] alloc irq_desc for 19 on node -1
[ 1.439318] alloc kstat_irqs on node -1
[ 1.439321] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.439327] pci 0000:00:1c.3: setting latency timer to 64
[ 1.439335] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 1.439339] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.439345] pci 0000:00:1c.4: setting latency timer to 64
[ 1.439353] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 1.439356] alloc irq_desc for 16 on node -1
[ 1.439358] alloc kstat_irqs on node -1
[ 1.439361] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.439367] pci 0000:00:1c.5: setting latency timer to 64
[ 1.439375] pci 0000:00:1e.0: setting latency timer to 64
[ 1.439379] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.439381] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 1.439384] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 1.439386] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 1.439388] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
[ 1.439390] pci_bus 0000:06: resource 0 mem: [0x0-0xfff]
[ 1.439392] pci_bus 0000:06: resource 1 mem: [0x0-0xfffff]
[ 1.439394] pci_bus 0000:06: resource 2 mem: [0x0-0xfffff]
[ 1.439396] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff]
[ 1.439398] pci_bus 0000:07: resource 1 mem: [0x80000000-0x800fffff]
[ 1.439400] pci_bus 0000:07: resource 2 pref mem [0x80100000-0x801fffff]
[ 1.439402] pci_bus 0000:08: resource 0 mem: [0x0-0xfff]
[ 1.439404] pci_bus 0000:08: resource 1 mem: [0x80200000-0x802fffff]
[ 1.439406] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff]
[ 1.439409] pci_bus 0000:0a: resource 1 mem: [0xf0400000-0xf04fffff]
[ 1.439411] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 1.439413] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
[ 1.439438] NET: Registered protocol family 2
[ 1.439511] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.439765] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.440169] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.440382] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.440384] TCP reno registered
[ 1.440439] NET: Registered protocol family 1
[ 1.440488] Trying to unpack rootfs image as initramfs...
[ 1.599297] Freeing initrd memory: 7465k freed
[ 1.603864] Simple Boot Flag at 0x36 set to 0x1
[ 1.604023] cpufreq-nforce2: No nForce2 chipset.
[ 1.604047] Scanning for low memory corruption every 60 seconds
[ 1.604145] audit: initializing netlink socket (disabled)
[ 1.604163] type=2000 audit(1271753190.601:1): initialized
[ 1.611477] highmem bounce pool size: 64 pages
[ 1.611482] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.612693] VFS: Disk quotas dquot_6.5.2
[ 1.612742] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.613198] fuse init (API version 7.12)
[ 1.613268] msgmni has been set to 1706
[ 1.613455] alg: No test for stdrng (krng)
[ 1.613463] io scheduler noop registered
[ 1.613465] io scheduler anticipatory registered
[ 1.613467] io scheduler deadline registered
[ 1.613500] io scheduler cfq registered (default)
[ 1.613512] pci 0000:00:02.0: Boot video device
[ 1.613779] alloc irq_desc for 24 on node -1
[ 1.613781] alloc kstat_irqs on node -1
[ 1.613794] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.613805] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.613955] alloc irq_desc for 25 on node -1
[ 1.613957] alloc kstat_irqs on node -1
[ 1.613965] pcieport-driver 0000:00:1c.3: irq 25 for MSI/MSI-X
[ 1.613976] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.614121] alloc irq_desc for 26 on node -1
[ 1.614123] alloc kstat_irqs on node -1
[ 1.614131] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 1.614141] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.614287] alloc irq_desc for 27 on node -1
[ 1.614288] alloc kstat_irqs on node -1
[ 1.614297] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 1.614307] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.614405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.614487] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614492] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614568] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614572] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614638] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614706] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614711] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614789] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614794] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614858] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614863] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614927] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.614931] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.614995] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.615000] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70135b8), AE_NOT_FOUND
[ 1.615037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.668074] ACPI: AC Adapter [ACAD] (on-line)
[ 1.668140] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.668143] ACPI: Power Button [PWRF]
[ 1.668186] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.668261] ACPI: Lid Switch [LID]
[ 1.668296] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.668298] ACPI: Power Button [PWRB]
[ 1.668870] ACPI: SSDT 7f6d3763 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 1.669369] ACPI: SSDT 7f6d30e7 005F7 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 1.671278] Monitor-Mwait will be used to enter C-1 state
[ 1.671296] Monitor-Mwait will be used to enter C-2 state
[ 1.671313] Monitor-Mwait will be used to enter C-3 state
[ 1.671319] Marking TSC unstable due to TSC halts in idle
[ 1.671338] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.671359] processor LNXCPU:00: registered as cooling_device0
[ 1.671362] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.671665] ACPI: SSDT 7f6d3a1f 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 1.671989] ACPI: SSDT 7f6d36de 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 1.672852] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.672869] processor LNXCPU:01: registered as cooling_device1
[ 1.672872] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.912056] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.912063] ACPI: Thermal Zone [THRM] (64 C)
[ 1.912109] isapnp: Scanning for PnP cards...
[ 1.924064] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.266223] isapnp: No Plug & Play device found
[ 2.267171] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.268233] brd: module loaded
[ 2.268601] loop: module loaded
[ 2.268653] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.268741] ata_piix 0000:00:1f.1: version 2.13
[ 2.268751] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.268788] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.268867] scsi0 : ata_piix
[ 2.268937] scsi1 : ata_piix
[ 2.269445] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 2.269448] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 2.269468] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.269475] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.269633] ata2: port disabled. ignoring.
[ 2.424036] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.424251] scsi2 : ata_piix
[ 2.424302] scsi3 : ata_piix
[ 2.424781] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
[ 2.424788] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
[ 2.425525] Fixed MDIO Bus: probed
[ 2.425552] PPP generic driver version 2.4.2
[ 2.425615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.425631] alloc irq_desc for 18 on node -1
[ 2.425633] alloc kstat_irqs on node -1
[ 2.425637] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.425646] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.425649] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.425673] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.429573] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.429580] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.429591] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704000
[ 2.436377] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.80, max UDMA/33
[ 2.444142] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.444202] usb usb1: configuration #1 chosen from 1 choice
[ 2.444225] hub 1-0:1.0: USB hub found
[ 2.444232] hub 1-0:1.0: 4 ports detected
[ 2.444277] alloc irq_desc for 23 on node -1
[ 2.444278] alloc kstat_irqs on node -1
[ 2.444282] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.444290] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.444293] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.444320] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.448216] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.448222] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.448235] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704400
[ 2.456287] ata1.00: configured for UDMA/33
[ 2.458798] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.80 PQ: 0 ANSI: 5
[ 2.460021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.460078] usb usb2: configuration #1 chosen from 1 choice
[ 2.460098] hub 2-0:1.0: USB hub found
[ 2.460108] hub 2-0:1.0: 6 ports detected
[ 2.460158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.460171] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.460187] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.460193] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.460196] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.460227] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.460260] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.460323] usb usb3: configuration #1 chosen from 1 choice
[ 2.460346] hub 3-0:1.0: USB hub found
[ 2.460351] hub 3-0:1.0: 2 ports detected
[ 2.460392] alloc irq_desc for 21 on node -1
[ 2.460394] alloc kstat_irqs on node -1
[ 2.460397] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.460403] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.460407] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.460428] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.460462] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.460523] usb usb4: configuration #1 chosen from 1 choice
[ 2.460545] hub 4-0:1.0: USB hub found
[ 2.460550] hub 4-0:1.0: 2 ports detected
[ 2.460589] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.460595] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.460598] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.460620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.460645] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.460710] usb usb5: configuration #1 chosen from 1 choice
[ 2.460730] hub 5-0:1.0: USB hub found
[ 2.460735] hub 5-0:1.0: 2 ports detected
[ 2.460773] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.460779] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.460782] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.460834] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.460858] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 2.460923] usb usb6: configuration #1 chosen from 1 choice
[ 2.460945] hub 6-0:1.0: USB hub found
[ 2.460950] hub 6-0:1.0: 2 ports detected
[ 2.460993] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.461012] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.461015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.461038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.461070] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 2.461137] usb usb7: configuration #1 chosen from 1 choice
[ 2.461161] hub 7-0:1.0: USB hub found
[ 2.461169] hub 7-0:1.0: 2 ports detected
[ 2.461247] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.463490] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.463493] Uniform CD-ROM driver Revision: 3.20
[ 2.463554] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.463586] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.464380] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.465446] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.465451] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.465453] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.465456] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.465458] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.465500] mice: PS/2 mouse device common for all mice
[ 2.465597] rtc_cmos 00:06: RTC can wake from S4
[ 2.465624] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.465653] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.465727] device-mapper: uevent: version 1.0.3
[ 2.465801] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.465879] device-mapper: multipath: version 1.1.0 loaded
[ 2.465881] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.465978] EISA: Probing bus 0 at eisa.0
[ 2.465983] Cannot allocate resource for EISA slot 1
[ 2.465985] Cannot allocate resource for EISA slot 2
[ 2.466008] EISA: Detected 0 cards.
[ 2.466155] cpuidle: using governor ladder
[ 2.466254] cpuidle: using governor menu
[ 2.466645] TCP cubic registered
[ 2.466768] NET: Registered protocol family 10
[ 2.467135] lo: Disabled Privacy Extensions
[ 2.467405] NET: Registered protocol family 17
[ 2.467419] Bluetooth: L2CAP ver 2.13
[ 2.467420] Bluetooth: L2CAP socket layer initialized
[ 2.467422] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.467424] Bluetooth: SCO socket layer initialized
[ 2.467454] Bluetooth: RFCOMM TTY layer initialized
[ 2.467456] Bluetooth: RFCOMM socket layer initialized
[ 2.467458] Bluetooth: RFCOMM ver 1.11
[ 2.467955] Using IPI No-Shortcut mode
[ 2.468001] PM: Resume from disk failed.
[ 2.468012] registered taskstats version 1
[ 2.468109] Magic number: 6:572:776
[ 2.468180] rtc_cmos 00:06: setting system clock to 2010-04-20 08:46:32 UTC (1271753192)
[ 2.468182] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.468184] EDD information not available.
[ 2.495943] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.996149] usb 2-4: new high speed USB device using ehci_hcd and address 4
[ 3.001034] Clocksource tsc unstable (delta = -468974389 ns)
[ 3.079299] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 3.079323] ata4.01: SATA link up <unknown> (SStatus 0 SControl 0)
[ 3.172489] usb 2-4: configuration #1 chosen from 1 choice
[ 3.232133] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.232154] ata3.01: SATA link down (SStatus 0 SControl 310)
[ 3.241598] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC33P, max UDMA/133
[ 3.241603] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.256728] ata3.00: configured for UDMA/133
[ 3.256882] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 3.256989] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.257024] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.257060] sd 2:0:0:0: [sda] Write Protect is off
[ 3.257062] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.257081] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.257178] sda: sda1 sda2 < sda5 >
[ 3.294507] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.294553] Freeing unused kernel memory: 540k freed
[ 3.294874] Write protecting the kernel text: 4580k
[ 3.294923] Write protecting the kernel read-only data: 1840k
[ 3.381298] Linux agpgart interface v0.103
[ 3.383335] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 3.384263] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 3.386990] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.413101] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.472506] [drm] Initialized drm 1.1.0 20060810
[ 3.474721] sky2 driver version 1.23
[ 3.474772] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.474787] sky2 0000:07:00.0: setting latency timer to 64
[ 3.474825] sky2 0000:07:00.0: Yukon-2 Extreme chip revision 2
[ 3.474931] alloc irq_desc for 28 on node -1
[ 3.474933] alloc kstat_irqs on node -1
[ 3.474952] sky2 0000:07:00.0: irq 28 for MSI/MSI-X
[ 3.475591] sky2 eth0: addr 00:1e:68:5f:e5:d8
[ 3.483783] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.483787] i915 0000:00:02.0: setting latency timer to 64
[ 3.492108] alloc irq_desc for 29 on node -1
[ 3.492112] alloc kstat_irqs on node -1
[ 3.492120] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 3.511234] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.566058] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.601759] usb 5-1: configuration #1 chosen from 1 choice
[ 3.707519] [drm] fb0: inteldrmfb frame buffer device
[ 3.844228] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 3.965334] acpi device:03: registered as cooling_device2
[ 4.002798] usb 5-2: configuration #1 chosen from 1 choice
[ 4.221325] acpi device:04: registered as cooling_device3
[ 4.476378] acpi device:05: registered as cooling_device4
[ 4.740377] acpi device:06: registered as cooling_device5
[ 4.840700] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240000eeaf87]
[ 4.988344] acpi device:07: registered as cooling_device6
[ 4.988445] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input5
[ 4.988470] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
 
Old 04-20-2010, 05:51 AM   #4
diva17
LQ Newbie
 
Registered: Apr 2010
Posts: 5

Original Poster
Rep: Reputation: 0
[ 4.988493] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.245496] [drm] LVDS-8: set mode 1280x800 e
[ 5.521267] Console: switching to colour frame buffer device 160x50
[ 5.731729] Monitor-Mwait will be used to enter C-3 state
[ 5.802142] PM: Starting manual resume from disk
[ 5.802145] PM: Resume from partition 8:5
[ 5.802147] PM: Checking hibernation image.
[ 5.802335] PM: Resume from disk failed.
[ 5.825190] EXT4-fs (sda1): barriers enabled
[ 5.847975] kjournald2 starting: pid 454, dev sda1:8, commit interval 5 seconds
[ 5.848102] EXT4-fs (sda1): delayed allocation enabled
[ 5.848105] EXT4-fs: file extents enabled
[ 5.862153] EXT4-fs: mballoc enabled
[ 5.862163] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.673509] type=1505 audit(1271753196.703:2): operation="profile_load" pid=479 name=/usr/share/gdm/guest-session/Xsession
[ 6.786052] type=1505 audit(1271753196.815:3): operation="profile_load" pid=480 name=/sbin/dhclient3
[ 6.786088] type=1505 audit(1271753196.815:4): operation="profile_load" pid=480 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.786120] type=1505 audit(1271753196.815:5): operation="profile_load" pid=480 name=/usr/lib/connman/scripts/dhclient-script
[ 6.823704] type=1505 audit(1271753196.851:6): operation="profile_load" pid=481 name=/usr/bin/evince
[ 6.832734] type=1505 audit(1271753196.860:7): operation="profile_load" pid=481 name=/usr/bin/evince-previewer
[ 6.838412] type=1505 audit(1271753196.868:8): operation="profile_load" pid=481 name=/usr/bin/evince-thumbnailer
[ 7.040485] type=1505 audit(1271753197.071:9): operation="profile_load" pid=483 name=/usr/lib/cups/backend/cups-pdf
[ 7.040562] type=1505 audit(1271753197.071:10): operation="profile_load" pid=483 name=/usr/sbin/cupsd
[ 7.099526] type=1505 audit(1271753197.128:11): operation="profile_load" pid=484 name=/usr/sbin/tcpdump
[ 8.080097] Adding 6016300k swap on /dev/sda5. Priority:-1 extents:1 across:6016300k
[ 8.610018] EXT4-fs (sda1): internal journal on sda1:8
[ 9.150669] udev: starting version 147
[ 10.557106] cfg80211: Calling CRDA to update world regulatory domain
[ 10.610071] lp: driver loaded but no devices found
[ 11.117099] Linux video capture interface: v2.00
[ 11.210742] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.288641] uvcvideo: Found UVC 1.00 device CNA7137 (04f2:b064)
[ 11.293496] sdhci: Secure Digital Host Controller Interface driver
[ 11.293498] sdhci: Copyright(c) Pierre Ossman
[ 11.311453] input: CNA7137 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input6
[ 11.311508] usbcore: registered new interface driver uvcvideo
[ 11.311510] USB Video Class driver (v0.1.0)
[ 11.353777] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
[ 11.353796] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.353815] mmc0: Unknown controller version (2). You may experience problems.
[ 11.353854] Registered led device: mmc0::
[ 11.353882] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA
[ 11.549472] cfg80211: World regulatory domain updated:
[ 11.549475] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.549477] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.549479] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.549481] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.549483] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.549485] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.572186] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 11.572189] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 11.572272] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.572281] iwlagn 0000:08:00.0: setting latency timer to 64
[ 11.572307] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 11.615940] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 11.616021] alloc irq_desc for 30 on node -1
[ 11.616023] alloc kstat_irqs on node -1
[ 11.616043] iwlagn 0000:08:00.0: irq 30 for MSI/MSI-X
[ 11.641265] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
[ 11.657410] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[ 12.099002] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.119010] usbcore: registered new interface driver snd-usb-audio
[ 13.321598] alloc irq_desc for 22 on node -1
[ 13.321601] alloc kstat_irqs on node -1
[ 13.321607] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.321640] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.787437] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.787505] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.787556] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 15.031037] sky2 eth0: enabling interface
[ 15.031206] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.032712] iwlagn 0000:08:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 15.362335] iwlagn 0000:08:00.0: loaded firmware version 228.61.2.24
[ 15.580532] Registered led device: iwl-phy0::radio
[ 15.580562] Registered led device: iwl-phy0::assoc
[ 15.580589] Registered led device: iwl-phy0::RX
[ 15.580624] Registered led device: iwl-phy0::TX
[ 15.632980] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.308569] type=1505 audit(1271753206.339:12): operation="profile_replace" pid=1137 name=/usr/share/gdm/guest-session/Xsession
[ 16.438343] type=1505 audit(1271753206.468:13): operation="profile_replace" pid=1138 name=/sbin/dhclient3
[ 16.438415] type=1505 audit(1271753206.468:14): operation="profile_replace" pid=1138 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 16.438466] type=1505 audit(1271753206.468:15): operation="profile_replace" pid=1138 name=/usr/lib/connman/scripts/dhclient-script
[ 16.441893] type=1505 audit(1271753206.472:16): operation="profile_replace" pid=1139 name=/usr/bin/evince
[ 16.452448] type=1505 audit(1271753206.480:17): operation="profile_replace" pid=1139 name=/usr/bin/evince-previewer
[ 16.458208] type=1505 audit(1271753206.488:18): operation="profile_replace" pid=1139 name=/usr/bin/evince-thumbnailer
[ 16.661324] type=1505 audit(1271753206.692:19): operation="profile_replace" pid=1143 name=/usr/lib/cups/backend/cups-pdf
[ 16.661452] type=1505 audit(1271753206.692:20): operation="profile_replace" pid=1143 name=/usr/sbin/cupsd
[ 16.722485] type=1505 audit(1271753206.751:21): operation="profile_replace" pid=1148 name=/usr/sbin/tcpdump
[ 18.236323] ppdev: user-space parallel port driver
[ 39.212090] wlan0: authenticate with AP 00:19:cb:a1:2c:64
[ 39.213606] wlan0: authenticated
[ 39.213608] wlan0: associate with AP 00:19:cb:a1:2c:64
[ 39.215768] wlan0: RX AssocResp from 00:19:cb:a1:2c:64 (capab=0x431 status=0 aid=1)
[ 39.215771] wlan0: associated
[ 39.234137] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 50.080049] wlan0: no IPv6 routers present
[ 1050.449067] CE: hpet increasing min_delta_ns to 15000 nsec

it wouldn't fit into one single post :">
 
Old 04-21-2010, 03:33 PM   #5
diva17
LQ Newbie
 
Registered: Apr 2010
Posts: 5

Original Poster
Rep: Reputation: 0
no one? please help
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot boot into Ubuntu after installation of windows on 2nd hdd azteka22 Ubuntu 2 12-03-2009 10:37 PM
Slackware as 2nd os on 2nd hdd chd_lad Linux - Newbie 7 04-05-2008 04:43 PM
Help Needed: Issue recognizing 2nd SATA HDD in a New HP Box - RHL Installation r_vin27 Linux - Newbie 3 02-04-2008 04:32 AM
XP on 1 HDD,Linux on 2nd HDD,remove ,other won't launch Dark Templar Linux - Newbie 3 05-07-2006 12:03 PM
How to format & mount 2nd hdd after FedCor1 has been installed on 1st hdd? clay394 Fedora 1 05-18-2004 02:50 PM


All times are GMT -5. The time now is 04:16 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration