LinuxQuestions.org
Did you know LQ has a Linux Hardware Compatibility List?
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Newbie
User Name
Password
Linux - Newbie This Linux forum is for members that are new to Linux.
Just starting out and have a question? If it is not in the man pages or the how-to's this is the place!

Notices

Reply
 
Search this Thread
Old 09-19-2006, 02:06 AM   #1
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Rep: Reputation: 15
[wifi][debian] Wpa_supplicant problems ..


On linux debian 2.6.8-2-386:

I have install ndiswrapper + My wifi drivers.
I have install wpa_supplicant, and the conf:
Code:
ctrl_interface=/var/run/wpa_supplicant

network={
        ssid="MYESSID****"
        key_mgmt=WPA-PSK
        proto=WPA
        pairwise=TKIP
        group=TKIP
        psk="MYPSK********"
}
But when I make wpa_supplicant:

Code:
vmo:/home/mycado# wpa_supplicant -Dndiswrapper -iwlan0 -c/etc/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=10):
     43 65 67 65 74 65 6c 4d 61 78                     CegetelMax
key_mgmt: 0x2
proto: 0x1
pairwise: 0x8
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=19): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='CegetelMax'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0f:3d:a9:5f:d1
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 2111 bytes of scan results (8 BSSes)
Scan results: 8
Selecting BSS from priority group 0
0: 00:0f:b5:cc:99:de ssid='CegetelMax' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:b5:cc:99:de (SSID='CegetelMax' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8c02 len=175
Custom wireless event: 'ASSOCINFO(ReqIE0b160c12182432043048606cdd160050f20101000050f20201000050f20201000050f202 RespIE)'
Association info event
req_ies - hexdump(len=52): 00 0a 43 65 67 65 74 65 6c 4d 61 78 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 0201 00 00 50 f2 02
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
assoc_wpa_ie - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0f:b5:cc:99:de
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0f:b5:cc:99:de
No keys have been configured - skip key clearing
Associated with 00:0f:b5:cc:99:de
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:0f:b5:cc:99:de
RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 c8 d3 17 32 72 71 ed c3 e0 63 60 2b cc 7b 6f 4c 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Setting authentication timeout: 10 sec 0 usec
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=95
  EAPOL-Key type=254
WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 c8 d3 17 32 72 71 ed c3 e0 63 60 2b cc 7b 6f 4c 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX message 1 of 4-Way Handshake from 00:0f:b5:cc:99:de (ver=1)
WPA: Renewed SNonce - hexdump(len=32): a8 cf ed 17 36 81 66 06 f5 7d 54 8d 26 04 94 11 8c 9f 73 4b 03 2e 3b ca 26 a7 3c a5 8f 98 99 c1
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: EAPOL-Key MIC - hexdump(len=16): 24 75 d8 6c c8 83 97 4e 40 fc 95 4c a4 19 41 b8
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key 2/4 - hexdump(len=137): 00 0f b5 cc 99 de 00 0f 3d a9 5f d1 88 8e 01 03 00 77 fe 01 09 00 20 00 00 00 00 00 00 00 01 a8 cf ed 17 36 81 66 06 f5 7d54 8d 26 04 94 11 8c 9f 73 4b 03 2e 3b ca 26 a7 3c a5 8f 98 99 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2475 d8 6c c8 83 97 4e 40 fc 95 4c a4 19 41 b8 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
RX EAPOL from 00:0f:b5:cc:99:de
RX EAPOL - hexdump(len=123): 01 03 00 77 fe 01 c9 00 20 00 00 00 00 00 00 00 02 c8 d3 17 32 72 71 ed c3 e0 63 60 2b cc 7b 6f 4c 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6f 54 73 e9 d0 70 3a a8 6a 15 d0 f8 08 89 2b 54 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=119
  EAPOL-Key type=254
WPA: RX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 c9 00 20 00 00 00 00 00 00 00 02 c8 d3 17 32 72 71 ed c3 e0 63 60 2b cc 7b 6f 4c 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6f 54 73 e9 d0 70 3a a8 6a 15 d0 f8 08 89 2b 54 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: RX message 3 of 4-Way Handshake from 00:0f:b5:cc:99:de (ver=1)
WPA: IE KeyData - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: No WPA/RSN IE for this AP known. Trying to get from scan results
WPA: Found the current AP from updated scan results
WPA: Sending EAPOL-Key 4/4
WPA: TX EAPOL-Key 4/4 - hexdump(len=113): 00 0f b5 cc 99 de 00 0f 3d a9 5f d1 88 8e 01 03 00 5f fe 01 09 00 20 00 00 00 00 00 00 00 02 a8 cf ed 17 36 81 66 06 f5 7d54 8d 26 04 94 11 8c 9f 73 4b 03 2e 3b ca 26 a7 3c a5 8f 98 99 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68d0 02 7c 03 d0 2b 59 20 2d e8 24 7a 7b 7d 00 00 00
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
RX EAPOL from 00:0f:b5:cc:99:de
RX EAPOL - hexdump(len=131): 01 03 00 7f fe 03 91 00 20 00 00 00 00 00 00 00 03 c8 d3 17 32 72 71 ed c3 e0 63 60 2b cc 7b 6f 4c 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9d 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e2 c8 75 20 38 c5 a2 34 43 3c 68 e0 6f 2b 2f e2 00 20 4e 54 db 06 c1 33 3a 02 df 65 43 51 e1 64 3f 35 70 ff 84 16 bd 7c a7 d0 ed 3c f7 f5 96 8c 93 f0
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX EAPOL-Key - hexdump(len=131): 01 03 00 7f fe 03 91 00 20 00 00 00 00 00 00 00 03 c8 d3 17 32 72 71 ed c3 e0 63 60 2b cc 7b 6f 4c 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9d 7c 86 af 7a f8 f4 37 5f 9e df 72 87 47 8c da 9f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e2 c8 75 20 38 c5 a2 34 43 3c 68 e0 6f 2b 2f e2 00 20 4e 54 db 06 c1 33 3a 02 df 65 43 51 e1 64 3f 35 70 ff 84 16 bd 7c a7 d0 ed 3c f7 f5 96 8c 93 f0
WPA: RX message 1 of Group Key Handshake from 00:0f:b5:cc:99:de (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=1 tx=0).
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
WPA: Sending EAPOL-Key 2/2
WPA: TX EAPOL-Key 2/2 - hexdump(len=113): 00 0f b5 cc 99 de 00 0f 3d a9 5f d1 88 8e 01 03 00 5f fe 03 11 00 20 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c25 e3 d1 f2 7d 2b 59 ee cf c4 7a fe e5 4f 71 00 00
WPA: Key negotiation completed with 00:0f:b5:cc:99:de [PTK=TKIP GTK=TKIP]
Cancelling authentication timeout
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=59
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=58
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=57
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=26 idleWhile=56
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=25 idleWhile=55
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=24 idleWhile=54
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=23 idleWhile=53
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=22 idleWhile=52
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=21 idleWhile=51
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=20 idleWhile=50
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=19 idleWhile=49
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=18 idleWhile=48
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=17 idleWhile=47
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=16 idleWhile=46
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=15 idleWhile=45
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=14 idleWhile=44
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=13 idleWhile=43
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=12 idleWhile=42
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=11 idleWhile=41
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=10 idleWhile=40
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=9 idleWhile=39
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=8 idleWhile=38
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=7 idleWhile=37
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=6 idleWhile=36
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=5 idleWhile=35
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=4 idleWhile=34
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=3 idleWhile=33
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=2 idleWhile=32
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=1 idleWhile=31
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=30
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=29
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=28
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=27
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=26
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=25
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=24
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=23
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=22
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=21
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=20
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=19
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=18
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=17
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=16
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=15
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=14
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=13
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=12
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=11
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=10
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=9
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=8
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=7
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=6
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=5
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=4
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=3
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=2
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=1
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Signal 2 received - terminating
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
vmo:/home/mycado#

Any idea ?
 
Old 09-19-2006, 10:42 AM   #2
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Original Poster
Rep: Reputation: 15
No idea ?
 
Old 09-19-2006, 02:35 PM   #3
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Original Poster
Rep: Reputation: 15
Help ..? :S
 
Old 09-26-2006, 09:22 AM   #4
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Original Poster
Rep: Reputation: 15
up my post
 
Old 09-28-2006, 03:12 PM   #5
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Original Poster
Rep: Reputation: 15
uppppppppppppppppppppppppppppp
 
Old 09-30-2006, 03:35 AM   #6
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Original Poster
Rep: Reputation: 15
up up up ..
 
Old 09-30-2006, 09:20 AM   #7
Hangdog42
LQ Veteran
 
Registered: Feb 2003
Location: Maryland
Distribution: Slackware
Posts: 7,785
Blog Entries: 1

Rep: Reputation: 414Reputation: 414Reputation: 414Reputation: 414Reputation: 414
If you turn off WPA encryption, does the wireless connection work? (I'm just trying to figure out if the problem is wpa_supplicant or ndiswrapper). Also, it might be helpful to post the .config you used to compile wpa_supplicant.
 
Old 10-03-2006, 07:45 AM   #8
Mycado
Member
 
Registered: Jun 2006
Location: Paris, France
Distribution: Debian, CentOS
Posts: 66

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by Hangdog42
If you turn off WPA encryption, does the wireless connection work? (I'm just trying to figure out if the problem is wpa_supplicant or ndiswrapper). Also, it might be helpful to post the .config you used to compile wpa_supplicant.
Work with WPA encryption OFF
I will upload .config
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[wifi][debian] problems with ndiswrapper .. Mycado Linux - Newbie 6 09-18-2006 05:32 PM
WPA_Supplicant problem on Debian Etch JaseP Linux - Wireless Networking 7 07-25-2006 01:44 AM
problems with wpa_supplicant holdenrj Mandriva 4 02-01-2006 02:42 AM
ndiswrapper, driverloader, wpa_supplicant, libranet (debian), smc2835W esl537 Linux - Wireless Networking 1 08-27-2005 05:17 PM
wpa_supplicant problems maddoggames Linux - Wireless Networking 2 01-22-2005 03:36 PM


All times are GMT -5. The time now is 12:50 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration