Wol (wake On Lan ) Problem
Hi All,
I am trying to turn on my PC over the LAN, and I am having problems. Here is what I have done. I have changed the BIOS parameters, turned off the PC without fully rebooting the system, and tested the Wake-on-LAN (WOL). The PC turned on and rebooted without any problems. Once the PC fully booted into linux (Fedora 7), I shutdown the system with and I was no longer able to wake the PC over LAN. This meant that linux had disabled WOL on my NIC. So, I have used ethtool to enable it, and here is the response I got. /sbin/ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: external Auto-negotiation: on Supports Wake-on: pg Wake-on: d Link detected: yes driver: uli526x version: 0.9.3 firmware-version: bus-info: 0000:00:1b.0 /usr/sbin/ethtool -s eth0 wol g Cannot set new wake-on-lan settings: Operation not supported not setting wol PLEASE HELP ME OUT WAT IS D PROBLEM THANKING YOU IN ADVANCE............ |
All times are GMT -5. The time now is 03:49 PM. |