way -j DNAT --to-destination 11.11.11.11/24 canot be. or way this not working

What are you trying to do?

1 members found this post helpful.

you can see in my thread in ununsvered questions about openvpn. So im yust experimenting with commands and notice that DNAT canot subnet and whant to se can this be done. its not that important.

i setup nat vpn and notice that on server when i do wireshark local ip of server first gooing to 11.11.11 local to vpn protocol and after that 11.11.11 connecting to TCP UDP protocol and sites i visit. its better explain in other thread.

iptables -t nat -A POSTROUTING -s 11.11.11.11 -j SNAT --to 10.8.0.0.1/24-vpn subnet iwas trayng this command.

p.s. in my connections everything is working yust im curios about this local ip connecting to sites i visit

DNAT Multiple Addresses
SNAT Multiple Addresses

1 members found this post helpful.

im idiot. i doing this way in router, no even cross my mind this way here.

thanks

You are welcome. It normally is the simple things we over look.

p.s

this links are great i newer cross on them on net.

That is an old tutorial and hasn't been updated in some time with the latest configuration options but it is still good.

master the basics, then go complicate your life. my moto