USB ADSL Modem
Hi,
I'm trying to get my USB ADSL Modem (Billion BIPAC 7000) to work. Tried it with a stinking OS and it works.
I have Suse 9.0, installed the generic linux driver from the Billion home page.
The modem doesn't connect to the access concentrator.
Here's some log info...
Thanks
linux:~ # ifconfig
eth0 Link encap:Ethernet HWaddr 00:0E:A6:6A:1E:E1
inet addr:192.168.2.3 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20e:a6ff:fe6a:1ee1/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:288 (288.0 b)
Interrupt:9 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:40 errors:0 dropped:0 overruns:0 frame:0
TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2608 (2.5 Kb) TX bytes:2608 (2.5 Kb)
linux:~ #
/var/log/messages:
Jun 29 15:37:34 linux pppd[2405]: Plugin pppoe.so loaded.
Jun 29 15:37:34 linux pppd[2405]: PPPoE Plugin Initialized
Jun 29 15:37:34 linux pppd[2405]: Plugin passwordfd.so loaded.
Jun 29 15:37:34 linux pppd[2405]: pppd 2.4.1 started by root, uid 0
Jun 29 15:37:34 linux pppd[2405]: Sending PADI
Jun 29 15:37:34 linux pppd[2405]: Sending PADI
Jun 29 15:37:36 linux pppd[2405]: Re-sending ...
Jun 29 15:37:48 linux last message repeated 2 times
Jun 29 15:38:00 linux pppd[2405]: Terminating on signal 15.
when i plug out and then plug in the usb modem cable to the computer:
Jun 29 15:48:36 linux kernel: usb.c: USB disconnect on device 00:10.0-1 address 2
Jun 29 15:48:52 linux kernel: hub.c: new USB device 00:10.0-1, assigned address 3
Jun 29 15:48:52 linux kernel: usb.c: USB device 3 (vend/prod 0x572/0xcb06) is not claimed by any active driver.
KInternet log:
SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Interface is eth0.
Status is: connecting
pppd[0]: Plugin pppoe.so loaded
pppd[0]: PPPoE Plugin Initialized
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: PADI
pppd[0]: sendto returned: Network is down
Status is: disconnecting
pppd[0]: Terminating on signal 15.
Status is: disconnecting
Status is: disconnecting
pppd[0] died: non-normal exit
KInternet options:
ask-password no
auto-dns yes
auto-reconnect no
auto-reconnect-delay 15
auto-reconnect-exits 8
connection-type dsl
defaultroute yes
demand no
device eth0
dns1
dns2
endpoint random
idle-seconds 600
ifcfg-filename ifcfg-dsl0
local-ip
max-number-of-links 1
modify-dns yes
modify-ip yes
mru 1492
mtu 1492
multilink no
password <hidden>
pppd-options
ppp-mode pppoe
provider-filename provider0
remote-ip
username ... well, you don't need to know :-)
|